The broadwell soc code was upstreamed based off an old coreboot branch
and apparently never tested with USBDEBUG.
This changeset fixes USBDEBUG on the not yet upstreamed Auron-Paine
board, as verified with a FT232H setup. The fix is simply removing
outdated code that since branching off had been deduplicated in upstream
coreboot, anyway.
Change-Id: I53c924aa2a5357ed8313d0c9eaa2f9f9e132345e
Signed-off-by: Georg Wicherski <gwicherski@gmail.com>
Reviewed-on: http://review.coreboot.org/11874
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Instead of renaming the junit filename, send abuild the desired
name on the command line.
Change-Id: I779bc180343bd549908750d7128bedbab7f36266
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The 'what-jenkins-does' makefile target was renaming the junit filename
after abuild finished. Instead, just add a command line parameter to
send it to a different filename.
Change-Id: I66f7d80d621573d77a5154f36f2db49d7b2e948a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11878
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Serial number is derived from the MAC address of first NIC.
Change-Id: I91e5555b462cca87d48fb56c83aedd1eb02eba62
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/11901
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Do this to wipe error message and hexdump of SPD from console log.
Change-Id: I45ffcb1c80aecf43b79d93faedcd62c8f0023cb7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/11900
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Value of tRFCmin was incorrectly using 2 Gigabit chip data.
There was no observed instability or bug reports because of this.
Change-Id: Ifa03b883afa5a304dd20caf3d4d0383c6cfebdb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/11899
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I3a42ba9494b5174920e36e3110b8d62d721fe742
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11886
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR,
we also remove the _MSR suffix, as they are, by definition, MSRs.
Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11761
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This chip is still being used and should not have been deleted. It's
a current intel chip, and doesn't even require an ME binary.
This reverts commit 959478a763.
Change-Id: I78594871f87af6e882a245077b59727e15f8021a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11860
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The existing microcode update system used custom, manually generated microcode
blob files. This made updates very difficult. Update parser to use stock
microcode update files as provided by AMD.
Change-Id: I772b264ad167f2a5d629dab5d64d9b0ccab3a053
Signed-off-by: Audrey Pearson <apearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11829
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Updating to a new IASL introduces a lot of warnings that are
not serious issues but can be fixed with some reworks.
- Method local variables that are set but never used now warn,
when needing to read back a register the ordering is now changed
to set the value in Local0 first so the compiler does not complain.
- Methods that create an object must be serialized
- A ResourceTemplate declared inside a _CRS with a named variable
does not seem to be able to compile without a warning. To fix
this move the ResourceTemplate outside the _CRS method.
- The DPTF CPU code was still using the old legacy \_PR.CPUx
instead of the new \_PR.CPxx definitions.
BUG=chrome-os-partner:44622
BRANCH=none
TEST=build glados with iasl-20150717 and see no warnings
Original-Change-Id: I4a66c7eb6495aac4ae1aa42100c846725c1a04d2
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302168
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia3af802ca2faab4f1c59e73f2ce31a65c7e862e0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11812
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
In order to support verstage the cache-as-ram split
is taken advantage of such that verstage has the
cache-as-ram setup and rosmtage has the cache-as-ram
tear down path. The verstage proper just initializes
the console and attempts to run romstage which triggers
the vboot verification of the firmware. In order to
pass the current FSP to use during romstage a global
variable in cache-as-ram is populated before returning
to the assembly code which tears down cache-as-ram.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados with verstage support as well as
VBOOT_DYNAMIC_WORK_BUFFER with direct link in romstage.
Change-Id: I8de74a41387ac914b03c9da67fd80f8b91e9e7ca
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11824
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To support x86 verstage one needs a working buffer for
vboot. That buffer resides in the cache-as-ram region
which persists across verstage and romstage. The current
assumption is that verstage brings cache-as-ram up
and romstage tears cache-as-ram down. The timestamp,
cbmem console, and the vboot work buffer are persistent
through in both romstage and verstage. The vboot
work buffer as well as the cbmem console are permanently
destroyed once cache-as-ram is torn down. The timestamp
region is migrated. When verstage is enabled the assumption
is that _start is the romstage entry point. It's currently
expected that the chipset provides the entry point to
romstage when verstage is employed. Also, the car_var_*()
APIs use direct access when in verstage since its expected
verstage does not tear down cache-as-ram. Lastly, supporting
files were added to verstage-y such that an x86 verstage
will build and link.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using separate verstage.
Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When a separate verstage is employed the verstage file
was just being added through the cbfs-files mechanism.
However, that doesn't allow one to specify other flags
that aren't supported that an architecture may require.
The x86 architecture is one of those entities in that
it needs its verstage to be XIP. To that end provide
a mechanism for adding verstage with options.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using his mechansim on x86.
Change-Id: Iaba053a55a4d84d8455026e7d6fa548744edaa28
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11819
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This partially reverts commit 33b535f1. After this commit, samsung/lumpy had its
internal USB EHCI controller broken, with no assigned IRQ.
PIRQA-PIRQH may be wired as edge-triggered interrupts, making them exclusive
for the GPIO to use. They cannot be used for PCI devices at the same time.
Change-Id: Ic90343401ac20ca8673baf927cd7703c3481aeab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/9993
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
If timestamps need to be enabled for t132-boards, build would break
because TIMESTAMP region does not exist. With this change, t132 boards
can enable "COLLECT_TIMESTAMPS" without any build error.
Change-Id: I283a5ec49b5af95bd524f590e352367b7cbfd83d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11893
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Changes to CR1 and CR2 were effectively overwriting the backlight
configuration from the devicetree with static values.
Instead read the maximum brightness value from BCLM (backlight
modulation frequency) and calculate the target level (Arg0 is the
target level as percentage).
Turned out that _BQC has to return a value from the list returned by
_BCL. So XBQC got a little heavier to search for the correct value.
Change-Id: I35419993c8250c95fc69ba4db30db9dba9e6f8ff
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11704
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
The two cases only differ in the register locations.
As the values in BRIG were all the same, consolidate them. They also
got normalized to percentages as the ACPI spec wants that (0x61 was 100%
before).
Change-Id: I9216a953bb89458ed102c39194ea370cbf463d5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11703
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Consolidate some common (and mostly broken) code. Will try to fix things
in separate commits.
Maybe, igd.asl taken from gm45 (the non-PCH case) could also be used for
i945 and sch. But this needs further investigation.
Change-Id: Id3663bf588458e1e71920b96a3149f96947921e9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11702
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
The right files just need to be added to the verstage
build. Do that so a stand alone verstage builds and
links.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I2d0c98760494e2f4657ee35b6f155690939d2d18
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11827
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to build stand alone verstage the chromeos.c
file needs to be part of the verstage target.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Id2b05548e4e10cd12002286913f2228b84802e63
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11828
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The current method was only taking the cbfs path. Because
of this fsp.bin was never being utilized from the RW slots.
Using prog_locate() now provides both the cbfs and vboot
locate methods for free.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I2b3e088326d5a965ad90806a7950b9f401ed57de
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11831
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Leave the SPI controller enabled upon boot block exit.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Change-Id: I5b10d7cc8d5d350282206abe6a945bab66f97ada
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Move base address into iomap.h. Use PCI symbols instead of SPI specific
symbols. Fix comments.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Change-Id: Id5d21603150b52fd1b71dd448105938bd6aff1a9
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11826
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to support x86 verstage proper the work buffer
needs to live in cache-as-ram. However, after cache-as-ram
is torn down one still needs the verification results to
know which slot was selected. Though the platforms with
a dedicated SRAM can just use the work buffer in SRAM, the
x86 cache-as-ram platforms need a place to stash the
results. For that situation cbmem is employed. This works
because when cbmem is initialized cache-as-ram is still
enabled. The VBOOT_DYNAMIC_WORK_BUFFER case assumes
verified boot doesn't start until after cbmem is up. That
doesn't change, but it's a goal to get rid of that option
entirely once all other x86 platforms are moved over to
pre-romstage vboot.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados with pre-romstage verification
as well as VBOOT_DYNAMIC_WORK_BUFFER case.
Change-Id: I7eacd0edb2b6ca52b59b74075d17c00b50676d4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11821
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On x86 the early stages are currently execute-in-place which
means they live in the memory-mapped spi flash. However, when
loading romstage from verstage the romstage is
execute-in-place so it's unnecessary to write over a read-only
media -- not to mention writing to read-only memory is wrong
to begin with.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Noted reduction of 20ms when
loading romstage.
Change-Id: I7cd399302a3925a05fbce82600b4c50ea66a0fcb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11823
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bump up the romstage size to allow more breathing room.
Change-Id: I4df7031d286c13797dccdf2f49d023bbf462fbb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The conditions in cbmem console for supporting verstage
were implicitly utilizing CONFIG_BOOTBLOCK_CONSOLE to handle
the cbmem console enablement. Fix it so verstage is a first
class citizen for deciding actions pertaining to cbmem console.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using verstage. cbmem console
shows verstage output.
Change-Id: Iba79efd1c1d4056f1a105a5e10ffc95f3e69b597
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11820
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For the purpose of isolating the work buffer logic
the surface area of the API was slimmed down. The
vb2_working_data structure is no longer exposed,
and the function signatures are updated accordingly.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If64184a79e9571ee8ef9822cfce1eda20fceee00
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11818
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For vboot1 there was an rmodule that was loaded and ran to
do the firmware verification. That's no longer used so remove
the last vestiges of VBOOT_STUB.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I6b41544874bef4d84d0f548640114285cad3474e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to introduce a verstage which performs vboot
verification the cache-as-ram environment needs to be
generalized and split into pieces that can be utilized
in romstage and/or verstage. Therefore, the romstage
pieces were removed from the cache-as-ram specific pieces
that are generic:
- Add fsp/car.h to house the declarations for functions in
the cache-as-ram environment
- Only have cache_as_ram_params which are isolated form the
cache-as-ram environment aside from FSP_INFO_HEADER.
- Hardware requirements for console initialization is done
in the cache-as-ram specific files.
- Provide after_raminit.S which can be included from a
romstage separated from cache-as-ram as well as one that
is tightly coupled to the cache-as-ram environment.
- Update the fallout from the API changes in
soc/intel/{braswell,common,skylake}.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302481
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11816
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The report_platform_info() and set_max_freq() are not being
used similarly on skylake and braswell. With the addition
of other SoCs I suspect a similar pattern will emerge. Instead
of having weak functions to ensure things link with the hardcoded
policy push these calls into their respective SoC homes.
For parity, both skylake and braswell were updated to be consistent
with the same calls prior to this patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Built braswell.
Original-Change-Id: I3371d09aff0629503254296955fef28d35754a38
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/303334
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2de33632ed127cac52d7075cbad95cd6387a1b46
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11815
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Latest FSPv83 made some change related to UPD/VPD
need this patch to align those
BUG=None
TEST=Build and Boot Cyan System
BRANCH=strago-7287.B
CQ-DEPEND=CL:*226897
Original-Change-Id: I6395f3a1f4eecaef14fc4720b00252f9e6143fa3
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291394
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303137
Original-Commit-Ready: John Zhao <john.zhao@intel.com>
Original-Tested-by: John Zhao <john.zhao@intel.com>
Change-Id: I9920eea84b802699454850bfde489668201ffeb6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11813
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On Skylake, mailbox interface is used to configure VRs, dropping direct msr
writing. With current fsp, svid/vr programming seems to be functional - no
errors are given in the svid transactions in boot, and hw engineer verified
the VRs on Kunimitsu. Additional tunnings might be needed later with power
testing.
24mhz calibration is no longer needed on Skylake due to bclk archtecture
change.
BRANCH=none
BUG=chrome-os-partner:45387
TEST=Built and boot on kunimitsu/glados, reboot, S3/resume verified.
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Change-Id: If99b5758fcdba8604139c761a07403d4a5d2eb4c
Original-Reviewed-on: https://chromium-review.googlesource.com/301470
Original-Commit-Ready: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I98acf78aac9c705614fb200f8c3313a89296fbf2
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11811
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Instead of just passing bits, tsc_low, tsc_high, and an
opaque pointer to chipset context those fields are bundled
into a cache_as_ram_params struct. Additionally, a new
struct fsp_car_context is created to hold the FSP
information. These could be combined as the existing
romstage code assumes what the chipset_context values are, but
I'm leaving the concept of "common" alone for the time being.
While working in that area the ABI between assembly and C code
has changed to just pass a single pointer to cache_as_ram_params
struct. Lastly, validate the bootloader cache-as-ram region
with the Kconfig options.
BUG=chrome-os-partner:44676
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Ib2a0e38477ef7c15cff1836836cfb55e5dc8a58e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/300190
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Change-Id: Ic5a0daa4e2fe5eda0c4d2a45d86baf14ff7b2c6c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11809
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It builds only on veyron_* which already select it, no need to ask user.
Change-Id: Ie508b9eade16e0f39073b23dc0da6b6d1e0a4c73
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10380
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
board_id() returns an integer which is platform-specific. 0 for one port
is different from 0 for another port. So there is no default board_id()
and hence enabling it on boards other than urara would cause build failure.
Not enabling it on urara or just setting id to "(none)" as is default results
in board_id() = 0 which means urara and an error message on console.
Change-Id: I94618f36a75e7505984bbec345a31fe0fa9cc867
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10379
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Fixes linking error. Specifies that we're in text mode.
Change-Id: I7ad258961039c19e1491e2b3832b003671d8a5c7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11848
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
E.g. on my MacbookAir to generate spd.bin to be used
with coreboot I do:
./inteltool -S spd.bin
Change-Id: If165475ed3e1f3262a8926ef619128d25b1e2896
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11847
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
MBa doesn't have a usable usbdebug port.
Change-Id: Ia8459daa5c9b9405c289954b28ecf1423b1f076c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11849
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Update to commit 832bc6f1 (Remove microcode stored in C-array format),
which is the latest commit in the BLOBs repository.
Building the Lenovo X60 currently fails as the microcode file cannot be
found.
CREATE build/mainboard/lenovo/x60/cbfs-file.wkWhPK.out (from src/mainboard/lenovo/x60/cmos.default)
make: *** No rule to make target '3rdparty/blobs/cpu/intel/model_69x/microcode.bin', needed by 'build/cpu_microcode_blob.bin'. Schluss.
Change-Id: I40ebceec299f46c19fd60861d872adcd91df3610
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11865
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Taken from cbfstool.
Change-Id: I4387900517dbfb1aa51ae6f679e26d0cf5b2acf8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11808
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested on T60 with intel graphics.
Change-Id: Id74d0a1315749052e7313135242e6b64862aa5e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5345
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Only one value would work with corresponding gma code currently (which one
depends on board). Going forward, it's possible to compute which number can
be used, so there is no need to keep this info around.
Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11862
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Timothy Pearson