As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4c9351652d81040cc4e7b85bdd1ba85709a74192
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ifd4329905847d9dd06de67b9a443c8ee50c0e7a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Setup EC_PCH_ARCORE_INT_L, tied to GPP_D17, and define as EC_SYNC_GPIO..
- change GPP_D17 definition to PAD_CFG_GPI_APIC_INVERT as
EC_PCH_ARCORE_INT_L is active low
- add EC_SYNC_GPIO to the group of chromeos_gpios for use by depthcharge
BUG=b:139384979
BRANCH=none
TEST="emerge_nocturne coreboot depthcharge chromeos-bootimage",
flash & boot nocturne in dev mode, verify that volume up and down
buttons work in the dev screen and that the device boots properly into
the kernel.
Change-Id: Ia43c622710fde8686c60b836fb8318931d79eb61
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
pull in the FPU VDDIO turn on to fix the power leakage problem
on FPU VDDIO and FPU CS during power on sequence.
BUG=b:138638571
BRANCH=none
TEST=emerge-hatch coreboot chromeos-bootimage
Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I3f6bf3676922e987c2e282b697a2333e2d90289e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tune I2C bus 1, 2 and 3 clock and make them meet spec.
BUG=b:140665478
TEST==flash coreboot to the DUT and measure I2C bus 1,2,3 clock
frequency less than 400KHz
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6b2a51a866e57d13fe528452e4efdcf17a72317f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35298
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. SKU1 for eMMC
2. SKU2 for SSD
BUG=b:140008849, b:140573677
TEST=Verify SSD is disabled when SKU ID = 2/4/21/22
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I827e6f1420801d43e0eb4708b8b8ad1692ef7e9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35204
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso's TimeStamp Counter is a new design and different than
Stoney Ridge. Although advertised as invariant, the ST TSC did
not become so until midway through POST making it an unreliable
source for measuring time. This is not the case for Picasso.
Remove the Stoney Ridge monotonic timer code and rely on the TSC.
Modify the calculation used in Family 15h of finding the number
of boost states first, and get the frequency directly out of the
Pstate0 register.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I909743483309279eb8c3bf68852d6082381f0dff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
It is already trivial to set D14F3x44 to 0, but add a function to wipe
both that and the settings in D14F3x48, along with x48's associated
addresses.
Change-Id: Ibec25562b2a1568681aea7caf86f00094c436a50
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Include the file containing the typedefs for uint_*.
Change-Id: If33765b6dc4236c4b38860bfc4f2cef9b226b81d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
These platforms return to romstage from FSP only after
already having torn CAR down. A copy of the entire CAR
region is available and discoverable via HOB.
Previously, CBMEM console detected on-the-fly that CAR
migration had happened and relocated cbmem_console_p
accoringlin with car_sync_var(). However, if the CAR_GLOBAL
pointing to another object inside CAR is a relative offset
instead, we have a more generic solution that can be used
with timestamps code as well.
Change-Id: Ica877b47e68d56189e9d998b5630019d4328a419
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35140
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify intel/fsp_broadwell_de such that timestamp_init() is
before raminit (and CAR teardown of FSP1.0), adding two new
early timestamps while doing so.
Other FSP1.0 platforms fsp_baytrail and fsp_rangeley already
do it this way.
Change-Id: I3b73e4a61622f789a49973a43b21e8028bcb8ca8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35279
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the very early days of FSP 1.0 this did not work so
we kept it disabled.
Change-Id: I8a88be6df335598d4c6007a8b7ff307b293e1f97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
From DDR4 SPD spec:
Byte 4 (0x004): SDRAM Density and Banks
Bits [7, 6]:
00 = 0 (no bank groups)
01 = 1 (2 bank groups)
10 = 2 (4 bank groups)
11 = reserved
Bit [5, 4] :
00 = 2 (4 banks)
01 = 3 (8 banks)
All others reserved
Separate DDR3 and DDR4 banks. And extened capmb, rows, cols and ranks.
Separate DDR3 and DDR4 ORGANIZATION/BUS_DEV_WIDTH offset.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5f56975ce73d8ed2d4de7d9fd08e5ae86993e731
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Based on HW schematic to modify USB setting.
Drallion has two type C on left and two type A on right.
BUG=b:138082886
BRANCH=N/A
TEST=N/A
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I925de209635d92ef61ccb9114efebb4b10f30e87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Sets all unused sata ports to disable in the device tree
Note:
SATA4 and SATA5 are located at the bottom of the board, but there
is no connector for this. Apparently, a board with an increased
number of ports is very rare. Perhaps this is a separate variant
of the Asrock motherboard. For this reason, these ports are also
disabled
Change-Id: I5b3ad372f1d6607cc7b4a78e3c59d2a5ae1d2cf5
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Disable spi0, i2c0 and i2c1 in the “SerialIoDevMode” register for the
following reasons:
1. when the AMI BIOS is used, these pci devices are disabled in
lspci.log;
2. there are no pads in the inteltool.log that use the functions of
these buses
Change-Id: I01ab10eb3fd41e81a1726805247c2b472d72287c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35070
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The string "register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" was mistakenly
taken from the Intel KBL-RVP8 devicetree.cb. Remove it, since the i2c4
bus is disabled in the "SerialIoDevMode" register
Change-Id: I44ecd5c22efd66b02a2851dc14a1a95421f39a71
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
1) VR domains current limit Icc max for Sky/Kaby Lake S is set based
on the processor TDP [1]. Updates information about this
2) Sets VR voltage limit to 1.52V, as described in the datasheets [2,3]
[1] Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde
[2] page 112-119, 6th Generation Intel(R) Processor Families
for S-Platforms, Volume 1 of 2, Datasheet, August 2018.
Document Number: 332687-008EN
[3] 7th Generation Intel(R) Processor Families for S Platforms and
Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1,
December 2018, Document Number: 335195-003
Change-Id: I6e1aefde135ffce75a5d837348595aa20aff0513
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The MCFG ACPI table was not being created.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I35bdefb2a565d18917a2f6517d443890f93bd252
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Decide if HECI1 should be hidden prior to boot to OS.
BUG=none
TEST=Boot to OS, verify if Heci1 is disabled on hatch system
using FSP 1344.
Change-Id: I7c63316c8b04fb101d34064daac5ba4fdc05a63c
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The documentation for StackBase and StackSize in FSPM_ARCH_UPD is
confusing. Previously the region was shared for heap and stack,
starting with FSP2.1 only for heap (or 'temporary RAM') for HOBs.
Moving the allocation outside DCACHE_BSP_STACK_SIZE allows use of
stack guards and reduces amount of reserved CAR for bootblock and
verstage, as the new allocation in .bss is only taken in romstage.
BUG=b:140268415
Change-Id: I4cffcc73a89cb97ab7759dd373196ce9753a6307
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TPMU_HA is a union of all the different hash digests, and so
sizeof(TPMU_HA) evaluates to 64 (the size of the largest one). This will
lead to out-of-bounds writes when copying smaller digests, so use the
specific digest size for each algorithm.
Change-Id: Ic9101f157d5a19836b200ecd99f060de552498d2
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 14049{49,50,51,52,53,54,55,56,57,58,60,61,62}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Include the file containing the typedefs for uint_*.
Change-Id: I3eae80a677e9d6932dc115523da2c0819a371fa7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35268
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Include the file containing the typedefs for uint_*.
Change-Id: Ib0eea9bfd0c8d9e3eba257b561980accf5b4bab4
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35267
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the new SuperIO ACPI generator to make includes in DSDT obsolete.
Manually tested on X11SSH-TF and verified that ACPI tables are correct.
Change-Id: I2ef49bb6f733994b249ae46f0460234380b552b8
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33253
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds Lewisburg C62x Series PCH support by adding the
Production and Super SKUs of the following PCI devices:
- LPC or eSPI Controllers,
- PCI Express Root Ports,
- SSATA and SATA Controllers,
- SMBus,
- SPI Controller,
- ME/HECI,
- Audio,
- P2SB,
- Power Management Controller.
These changes are in accordance with the documentation:
[*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US
Change-Id: I7eaf2c1bb725ffed66f86c023c415ad17fe5793d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Add a generic SuperIO ACPI generator, dropping the need to include
additional code in DSDT for SuperIO.
It generates a device HID based on the decoded I/O range.
Tested on Supermicro X11SSH-TF using AST2400.
The SSDT contains no errors and all devices are present.
Possible TODOs:
* Add "enter config" and "exit config" bytes
* Generate support methods to enter and exit config mode
* Generate support methods to query, change or disable current
resource settings on specific LDNs
Change-Id: I2716ae0580d68e5d4fcc484cb1648a2cdc1f4ca0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Some USB 3.0 devices fail to be enumerated after USB reset, and xhci
port status register shows the device is disconnected. After measuring
the USB signal, we found that the USB disconnect threshold was lower and
that the disconnect event was triggered unexpectedly.
USB designers suggest changing discth to 15.
BUG=b:122047652
TEST=emerge-kukui coreboot chromeos-bootimage
Change-Id: I0e8556035b49d693a42cbe1099a6882a1c0ed0d1
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
These devices can be accessed directly by symbolname,
without a search and walk through the tree, as they
have static paths.
Change-Id: I711058f5c809fa9bc7ea4333aaebad6847ebdfd4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31933
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Vendor only does dummy reads right after JEDEC init is finished
and dram init was marked as finished.
Dummy reads also make much more sense after JEDEC init as a way to
send a few JEDEC commands, presumably as a way to make sure it is
ready.
TESTED on ga-g41m-es2l (still boots fine)
Change-Id: I8069f9c08ad5e5268ddbe3711d58bc42522f938c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Based on HW schematic to modify PCIE setting.
BUG=b:138082886
BRANCH=N/A
TEST=N/A
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia744a6f3cba76c507c1c43b0a981cb6d89c1a40f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Use sku-id to load the SAR values for Bloog device.
BUG=b:138180187
BRANCH=octopus
TEST=build and verify load Bloog SAR by sku-id
Cq-Depend: chromium:1771477
Change-Id: Id0bc2609fd1c4eaeb380f8f1532ab30d34e2aeb3
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
To avoid possible panel failures due to incorrect timing settings for
PTN3460, the internal graphic device should be disabled.
Change-Id: Ie0b9ed99fb78461bb48d6f2ff328643cd8c2cd15
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Add printing SPD data for debug usage.
BUG=b:139397313
BRANCH=N/A
TEST=Tested the on Hatch and checked cbmem log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1e257a8ea6ff9c906267841819d2a4b62a9e0b9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
To support multi digists the tlcl_extend() for TPM2 expects
TPML_DIGEST_VALUE pointer as input argument.
BUG=N/A
TEST=Build binary and verified logging on Facebook FBG-1701
Change-Id: I8d86c41c23e4e93a84e0527d7cddcfd30d5d8394
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Currently SPI vendor IDs are magic numbers in spi_flash.c. These definitions
are needed for AMD's fch_spi. So add the definitions to spi_generic.h and use
it at spi_flash.c
BUG=b:136595978
TEST=Build test of several platforms that don't use stoneyridge. Build and boot
grunt (using stoneyridge new fch_spi).
Change-Id: Ie39485d8c092151db8c9d88afaf02e19c507c93f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Martin Roth