It shouldn't be used any more as we're about to free() the memory behind
the controller -- therefore detach it.
Change-Id: I875322a9940570c51d412a7f3bfb6af4ea3b3764
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/2899
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.huber@secunet.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are assumptions that COLLECT_TIMESTAMPS and CONSOLE_CBMEM
rely on EARLY_CBMEM_INIT. This isn't true in the face of
DYNAMIC_CBMEM as it provides the same properties as EARLY_CBMEM_INIT.
Therefore, allow one to select COLLECT_TIMESTAMPS and CONSOLE_CBMEM
when DYNAMIC_CBMEM is selected. Lastly, don't hard code the cbmem
implementation when COLLECT_TIMESTAMPS is selected.
Change-Id: I053ebb385ad54a90a202da9d70b9d87ecc963656
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2895
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
mmio_resource() was previously being used for reserving
RAM from the OS by using IORESOURCE_IGNORE_MTRR atrribute.
Instead, be more explicit for those uses with
reserved_ram_resource(). bad_ram_resource() now calls
reserved_ram_resource(). Those resources are marked as cacheable
but reserved.
The sandybridge and haswell code were relying on the implementation
fo the MTRR algorithm's interaction for reserved regions. Instead
be explicit about what ranges are MMIO reserved and what are RAM
reserved.
Change-Id: I1e47026970fb37c0305e4d49a12c98b0cdd1abe5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2886
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When the linking of ramstage was changed to use an intermeidate
object with all ramstage objects in it the .textfirst section
was introduced to keep the entry point at 0. However, the
section was not marked allocatable or executable. Nor was it
marked as @progbits. That didn't cause an issue on its own since
.textfirst was directly called out in the linker script. However,
the rmodule infrastructure relies on all the relocation entries
being included in the rmodule. Without the proper section attributes
the .rel.textfirst section entries were not being included in
the final ramstage rmodule.
Change-Id: I54e7055a19bee6c86e269eba047d9a560702afde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The ramstage is now linked using an intermediate object that
is created from the complete list of ramstage object files.
The rmodule code was developed when ramstage was linked using
an archive file. Because of the fact that the rmodule headers
are not referenced from any other object the link could start
by specifying the rmodule header object for ramstage. That,
however, is not the case as all ramstage objects are included
in the intermediate linked object. Therefore, the
ramstage_module_header.ramstage.o object file needs to be removed
from the object list for the ramstage rmodule.
Change-Id: I6a79b6f8dd1dbfe40fdc7753297243c3c9b45fae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There were 3 things stopping the vboot module from being
compiled:
1. The vboot_reference code removed in the firmware/arch/$(ARCH)/include
directory. This caused romcc to fail because romcc fails if -I<dir>
points to non-existent directory.
2. The rmodule API does not have the no-clearing-of-bss variant of the
load function.
3. cbfs API changes.
Change-Id: I1e1296c71c5831d56fc9acfaa578c84a948b4ced
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The vboot module relied on being able to flush the console
after it called vtxprintf() from its log wrapper function.
Expose the console_tx_flush() function in romstage so the
vboot module can ensure messages are flushed.
Change-Id: I578053df4b88c2068bd9cc90eea5573069a0a4e8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2882
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The x86 linker script added a .textfirst section. In
order to properly link ramstage as a relocatable module
the .textfirst section needs to be included.
Also, the support for code coverage was added by including
the constructor section and symbols. Coverage has not been
tested as I suspect it might not work in a relocatable
environment without some tweaking. However, the section
and symbols are there if needed.
Change-Id: Ie1f6d987d6eb657ed4aa3a8918b2449dafaf9463
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2883
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There were some cbfs calls that did not get transitioned
to the new cbfs API. Fix the callsites to conform to the
actual cbfs, thus fixing the copilation errors.
Change-Id: Ia9fe2c4efa32de50982e21bd01457ac218808bd3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In commit e820e5cb3a titled
"Make xcompile support multiple architectures" the LINKER_SUFFIX
variable was introduced to bypass gold if the bfd linker was
available. However, the LINKER_SUFFIX wasn't honored when
the compiler evironment variables were set. Fix the original
intention.
Change-Id: I608f1e0cc3d0bea3ba1e51b167d88c66d266bceb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Make it more similar to i82801d LPC init.
Change-Id: I7b32747ee8012c220c8628994d749999c144b716
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/2545
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
After another incident related to virtual pointers in lib_sysinfo (and
resulting confusion), I decided to put some comments on the matter into
the code.
Remember, we decided to always use virtual pointers in lib_sysinfo, but
it's not always obvious from the code, that they are.
See also:
425973c libpayload: Always use virtual pointers in struct sysinfo_t
593f577 libpayload: Fix use of virtual pointers in sysinfo
Change-Id: I886c3b1d182cba07f1aab1667e702e2868ad4b68
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/2878
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The amd_mtrr.c file contains a copy of the fixed MTRR algorithm.
However, the AMD code needs to handle the RdMem and WrMem attribute
bits in the fixed MTRR MSRs. Instead of duplicating the code
with the one slight change introduce a Kconfig option,
X86_AMD_FIXED_MTRRS, which indicates that the RdMem and WrMem fields
need to be handled for writeback fixed MTRR ranges.
The order of how the AMD MTRR setup routine is maintained by providing
a x86_setup_fixed_mtrrs_no_enable() function which does not enable
the fixed MTRRs after setting them up. All Kconfig files which had a
Makefile that included amd/mtrr in the subdirs-y now have a default
X86_AMD_FIXED_MTRRS selection. There may be some overlap with the
agesa and socket code, but I didn't know the best way to tease out
the interdependency.
Change-Id: I256d0210d1eb3004e2043b46374dcc0337432767
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2866
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The patch is based on Thatcher board. So far it boots Linux (3.2/3.7),
internal network adapter works, AHCI works. External PCI/PCIe slots
works too. Power management/ACPI seems to work.
Internal VGA works with dumped ROM (VGA/DVI), but lacks GART.
PCI pref devices are being relocated by Linux, reason unknown.
This is a good start.
USB and XHCI untested but visible.
Change-Id: I1869aecb2634d548b00b3c9139517d6a0e0c9817
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/2038
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The haswell patches that verified correctly were not yet submitted,
but verified correctly. However they still used romcc_io.h which was
dropped in another patch earlier today.
With a lot of development happening in parallel, this is
unfortunately nothing that the gerrit 2.6 Rebase If Necessary submit
type could have fixed.
Change-Id: Ifef9ae05b22c408e78d6cff37defd68e4ed91ed9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2876
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Changes:
- Get rid of the E350M1 mainboard specific code and use the
platform generic function wrapper that was added in change
http://review.coreboot.org/#/c/2497/
AMD f14: Add SPD read functions to wrapper code
- Move DIMM addresses into devicetree.cb
- Add the ASF init that used to be in the SPD read code into
mainboard_enable()
Notes:
- The DIMM reads only happen in romstage, so the function is not
available in ramstage. Point the read-SPD callback to a generic
function in ramstage.
Change-Id: I08c2aebc62facc14f94400ee1ad188901ba73f19
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-on: http://review.coreboot.org/2875
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Changes:
- Get rid of the LiPPERT FrontRunner-AF and Toucan-AF mainboard
specific code and use the platform generic function wrapper that
was added in change
http://review.coreboot.org/#/c/2497/
AMD f14: Add SPD read functions to wrapper code
- Move DIMM addresses into devicetree.cb
- Add the ASF init that used to be in the SPD read code into
mainboard_enable()
Notes:
- The DIMM reads only happen in romstage, so the function is not
available in ramstage. Point the read-SPD callback to a generic
function in ramstage.
Change-Id: I4ee5e1bc34f4caee20615c48248d4f7605c09377
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-on: http://review.coreboot.org/2874
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This adds a test case for using CBFS images that reside in RAM
and a Makefile to run it (and maybe other tests in the future).
The test concerns an issue in libcbfs when using x86 style CBFS
images in non-canonical locations (eg. when loading CBFS images
for processing).
Use with "make run" inside the tests directory.
Change-Id: I1af3792a1451728ff9594ba7f0410027cdecb59d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2623
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When calculating initial CBFS empty entry space, the size of header itself must
be not included (with the reserved space for entry name). This is a regression
of the old cbfstool size bug.
Before this fix, in build process we see:
OBJCOPY cbfs/fallback/romstage_null.bin
W: CBFS image was created with old cbfstool with size bug.
Fixing size in last entry...
And checking the output binary:
cbfstool build/coreboot.pre1 print -v -v
DEBUG: read_cbfs_image: build/coreboot.pre1 (262144 bytes)
DEBUG: x86sig: 0xfffffd30, offset: 0x3fd30
W: CBFS image was created with old cbfstool with size bug.
Fixing size in last entry...
DEBUG: Last entry has been changed from 0x3fd40 to 0x3fd00.
coreboot.pre1: 256 kB, bootblksz 688, romsize 262144, offset 0x0 align: 64
Name Offset Type Size
(empty) 0x0 null 261296
DEBUG: cbfs_file=0x0, offset=0x28, content_address=0x28+0x3fcb0
After this fix, no more alerts in build process.
Verified to build successfully on x86/qemu and arm/snow configurations.
Change-Id: I35c96f4c10a41bae671148a0e08988fa3bf6b7d3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot tables are, unlike general system tables, a platform
independent concept. Hence, use the same code for coreboot table
generation on all platforms. lib/coreboot_tables.c is based
on the x86 version of the file, because some important fixes
were missed on the ARMv7 version lately.
Change-Id: Icc38baf609f10536a320d21ac64408bef44bb77d
Signed-off-by: Stefan Reinauer <reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/2863
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
It's helpful to switch back and forth for developer and
recovery settings while testing boards. The wtm2 board
currently doesn't have gpios which dynamically seelect that.
Might as well make it easy to change the value for each
setting with one define. The original defaults are kept.
Change-Id: I7b928c592fd20a1b847e4733f4cdef09d6ddad4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2861
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The coreboot include were not being passed correctly when
building vboot_reference. The paths being included were of the
src/<dir> form. However, vboot_reference lives in
src/../vboot_reference. That coupled with the recursive make
call made vboot_reference not see coreboot's header files.
Fix this by appending ../ to coreboot's default include paths.
Change-Id: I73949c6f854ecfce77ac36bb995918d51f91445e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2860
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The vboot_handoff structure contians the VbInitParams as well as the
shared vboot data. In order for the boot loader to find it, the
structure address and size needs to be obtained from the coreboot
tables.
Change-Id: I6573d479009ccbf373a7325f861bebe8dc9f5cf8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2857
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Take the vboot path in romstage. This will complete the haswell
support for vboot firmware selection.
Built and booted. Noted firmware select worked on an image with
RW firmware support. Also checked that recovery mode worked as
well by choosing the RO path.
Change-Id: Ie2b0a34e6c5c45e6f0d25f77a5fdbaef0324cb09
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2856
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The get_write_protect_state() function was added to the
chromeos API that needs to be supported by the boards.
Implement this support.
Built and booted. Noted firmware select worked on an image with
RW firmware support. Also checked that recovery mode worked as
well by choosing the RO path.
Change-Id: Ifd213be25304163fc61d153feac4f5a875a40902
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2855
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch implements support for vboot firmware selection. The vboot
support is comprised of the following pieces:
1. vboot_loader.c - this file contains the entry point,
vboot_verify_firmware(), for romstage to call in order to perform
vboot selection. The loader sets up all the data for the wrapper
to use.
2. vboot_wrapper.c - this file contains the implementation calling the vboot
API. It calls VbInit() and VbSelectFirmware() with the data supplied
by the loader.
The vboot wrapper is compiled and linked as an rmodule and placed in
cbfs as 'fallback/vboot'. It's loaded into memory and relocated just
like the way ramstage would be. After being loaded the loader calls into
wrapper. When the wrapper sees that a given piece of firmware has been
selected it parses firmware component information for a predetermined
number of components.
Vboot result information is passed to downstream users by way of the
vboot_handoff structure. This structure lives in cbmem and contains
the shared data, selected firmware, VbInitParams, and parsed firwmare
components.
During ramstage there are only 2 changes:
1. Copy the shared vboot data from vboot_handoff to the chromeos acpi
table.
2. If a firmware selection was made in romstage the boot loader
component is used for the payload.
Noteable Information:
- no vboot path for S3.
- assumes that all RW firmware contains a book keeping header for the
components that comprise the signed firmware area.
- As sanity check there is a limit to the number of firmware components
contained in a signed firmware area. That's so that an errant value
doesn't cause the size calculation to erroneously read memory it
shouldn't.
- RO normal path isn't supported. It's assumed that firmware will always
load the verified RW on all boots but recovery.
- If vboot requests memory to be cleared it is assumed that the boot
loader will take care of that by looking at the out flags in
VbInitParams.
Built and booted. Noted firmware select worked on an image with
RW firmware support. Also checked that recovery mode worked as well
by choosing the RO path.
Change-Id: I45de725c44ee5b766f866692a20881c42ee11fa8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2854
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
For completeness add a vboot rmodule type since vboot will be
built as an rmodule.
Change-Id: I4b9b1e6f6077f811cafbb81effd4d082c91d4300
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2853
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The vboot firmware selection from romstage will need to
pass the resulting vboot data to other consumers. This will
be done using a cbmem entry.
Change-Id: I497caba53f9f3944513382f3929d21b04bf3ba9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2851
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Convert the existing haswell code to support reloctable ramstage
to use dynamic cbmem. This patch always selects DYNAMIC_CBMEM as
this option is a hard requirement for relocatable ramstage.
Aside from converting a few new API calls, a cbmem_top()
implementation is added which is defined to be at the begining of the
TSEG region. Also, use the dynamic cbmem library for allocating a
stack in ram for romstage after CAR is torn down.
Utilizing dynamic cbmem does mean that the cmem field in the gnvs
chromeos acpi table is now 0. Also, the memconsole driver in the kernel
won't be able to find the memconsole because the cbmem structure
changed.
Change-Id: I7cf98d15b97ad82abacfb36ec37b004ce4605c38
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2850
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Dynamic cbmem is now a requirement for relocatable ramstage.
This patch replaces the reserve_* fields in the romstage_handoff
structure by using the dynamic cbmem library.
The haswell code is not moved over in this commit, but it should be
safe because there is a hard requirement for DYNAMIC_CBMEM when using
a reloctable ramstage.
Change-Id: I59ab4552c3ae8c2c3982df458cd81a4a9b712cc2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2849
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Here's the great news: From now on you don't have to worry about
hitting the right io.h include anymore. Just forget about romcc_io.h
and use io.h instead. This cleanup has a number of advantages, like
you don't have to guard device/ includes for SMM and pre RAM
anymore. This allows to get rid of a number of ifdefs and will
generally make the code more readable and understandable.
Potentially in the future some of the code in the io.h __PRE_RAM__
path should move to device.h or other device/ includes instead,
but that's another incremental change.
Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch fixes an issue for rmodules which are copied into memory
at the final load/link location. If the bss section is cleared for
that rmodule the relocation could not take place properly since the
relocation information was wiped by act of clearing the bss. The
reason is that the relocation information resides at the same
address as the bss section. Correct this issue by performing the
relocation before clearing the bss.
Change-Id: I01a124a8201321a9eaf6144c743fa818c0f004b4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2822
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
This patch adds a parallel implementation of cbmem that supports
dynamic sizing. The original implementation relied on reserving
a fixed-size block of memory for adding cbmem entries. In order to
allow for more flexibility for adding cbmem allocations the dynamic
cbmem infrastructure was developed as an alternative to the fixed block
approach. Also, the amount of memory to reserve for cbmem allocations
does not need to be known prior to the first allocation.
The dynamic cbmem code implements the same API as the existing cbmem
code except for cbmem_init() and cbmem_reinit(). The add and find
routines behave the same way. The dynamic cbmem infrastructure
uses a top down allocator that starts allocating from a board/chipset
defined function cbmem_top(). A root pointer lives just below
cbmem_top(). In turn that pointer points to the root block which
contains the entries for all the large alloctations. The corresponding
block for each large allocation falls just below the previous entry.
It should be noted that this implementation rounds all allocations
up to a 4096 byte granularity. Though a packing allocator could
be written for small allocations it was deemed OK to just fragment
the memory as there shouldn't be that many small allocations. The
result is less code with a tradeoff of some wasted memory.
+----------------------+ <- cbmem_top()
| +----| root pointer |
| | +----------------------+
| | | |--------+
| +--->| root block |-----+ |
| +----------------------+ | |
| | | | |
| | | | |
| | alloc N |<----+ |
| +----------------------+ |
| | | |
| | | |
\|/ | alloc N + 1 |<-------+
v +----------------------+
In addition to preserving the previous cbmem API, the dynamic
cbmem API allows for removing blocks from cbmem. This allows for
the boot process to allocate memory that can be discarded after
it's been used for performing more complex boot tasks in romstage.
In order to plumb this support in there were some issues to work
around regarding writing of coreboot tables. There were a few
assumptions to how cbmem was layed out which dictated some ifdef
guarding and other runtime checks so as not to incorrectly
tag the e820 and coreboot memory tables.
The example shown below is using dynamic cbmem infrastructure.
The reserved memory for cbmem is less than 512KiB.
coreboot memory table:
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000002ffff: RAM
2. 0000000000030000-000000000003ffff: RESERVED
3. 0000000000040000-000000000009ffff: RAM
4. 00000000000a0000-00000000000fffff: RESERVED
5. 0000000000100000-0000000000efffff: RAM
6. 0000000000f00000-0000000000ffffff: RESERVED
7. 0000000001000000-000000007bf80fff: RAM
8. 000000007bf81000-000000007bffffff: CONFIGURATION TABLES
9. 000000007c000000-000000007e9fffff: RESERVED
10. 00000000f0000000-00000000f3ffffff: RESERVED
11. 00000000fed10000-00000000fed19fff: RESERVED
12. 00000000fed84000-00000000fed84fff: RESERVED
13. 0000000100000000-00000001005fffff: RAM
Wrote coreboot table at: 7bf81000, 0x39c bytes, checksum f5bf
coreboot table: 948 bytes.
CBMEM ROOT 0. 7bfff000 00001000
MRC DATA 1. 7bffe000 00001000
ROMSTAGE 2. 7bffd000 00001000
TIME STAMP 3. 7bffc000 00001000
ROMSTG STCK 4. 7bff7000 00005000
CONSOLE 5. 7bfe7000 00010000
VBOOT 6. 7bfe6000 00001000
RAMSTAGE 7. 7bf98000 0004e000
GDT 8. 7bf97000 00001000
ACPI 9. 7bf8b000 0000c000
ACPI GNVS 10. 7bf8a000 00001000
SMBIOS 11. 7bf89000 00001000
COREBOOT 12. 7bf81000 00008000
And the corresponding e820 entries:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
BIOS-e820: [mem 0x0000000000001000-0x000000000002ffff] usable
BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
BIOS-e820: [mem 0x0000000001000000-0x000000007bf80fff] usable
BIOS-e820: [mem 0x000000007bf81000-0x000000007bffffff] type 16
BIOS-e820: [mem 0x000000007c000000-0x000000007e9fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
Change-Id: Ie3bca52211800a8652a77ca684140cfc9b3b9a6b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2848
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Change "ERROR" to "WARNING" -- not finding the indicated file is usually
not a fatal error.
Change-Id: I0600964360ee27484c393125823e833f29aaa7e7
Signed-off-by: Shawn Nematbakhsh <shawnn@google.com>
Reviewed-on: http://review.coreboot.org/2833
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Using the CPU microcode update script and
Intel's Linux* Processor Microcode Data File
from 2013-02-22
Change-Id: I9bb60bdc46f69db85487ba923e62315f6e5352f9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2845
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Using the CPU microcode update script and
Intel's Linux* Processor Microcode Data File
from 2013-02-22
Change-Id: Icaf0e39978daa9308cc2f0c4856d99fb6b7fdffa
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2844
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
for latest URL of their microcode tar ball
Change-Id: I3da2bdac4b2ca7d3f48b20ed389f6a47275d24fe
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2842
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Force link speed on these platforms to 3 Gbps to defeat buggy SATA
drives.
Change-Id: Ia38a7c486fb1f4469cd67ca5244bbf61f877d556
Signed-off-by: Shawn Nematbakhsh <shawnn@google.com>
Reviewed-on: http://review.coreboot.org/2823
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The standard string functions memcmp(), memset(), and memcpy()
are needed by most programs. The rmodules class provides a way to
build objects for the rmodules class. Those programs most likely need
the string functions. Therefore provide those standard functions to
be used by any generic rmodule program.
Change-Id: I2737633f03894d54229c7fa7250c818bf78ee4b7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2821
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This configures power management registers according to
the 1.2.0 reference code drop. There are many inconsistencies
with the documentation and I tried to note those with ?.
This does not do the same for LynxPoint-H yet.
Change-Id: I9b8f5c24a8b0931075a44398571c9b0d54cce6a6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2819
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This uses the new helper function added earlier.
Change-Id: Icdb5d5c51f70eeb7e39e11062276ceb3eb3d9473
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2818
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is updated to handle LynxPoint-H and LynxPoint-LP
and a new wake event is added for the power button.
Boot, suspend/resume, reboot, etc on WTM2
and then check the event log to see if expected events
have been added.
Change-Id: I15cbc3901d81f4fd77cc04de37ff5fa048f9d3e8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2817
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This makes use of the new functions from pmutil.c that take
care of the differences between -H and -LP chipsets.
It also adds support for the LynxPoint-LP GPE0 register block
and the SMI/SCI routing differences.
The FADT is updated to report the new 256 byte GPE0 block on
wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address
block so that part is zeroed to prevent IASL and the kernel
from complaining about a mismatch.
This was tested on WTM2. Unfortunately I am still unable to get an
SCI delivered from the EC but I suspect that is due to a magic
command needed to put the EC in ACPI mode. Instead I verified that
all of the power management and GPIO registers were set to expected
values.
I also tested transitions into S3 and S5 from both the kernel and
by pressing the power button at the developer mode screen and they
all function as expected.
Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The kernel ACPI was not happy with the Add inside a
ResourceTemplate (or perhaps within the IO declaration)
Instead make a buffer of IO reservations and turn _CRS
into a method that updates the buffer depending on the
chipset type.
This adds an \ISLP() method that checks the chipset LPC
device ID to see if it is -LP or -H.
It also increases the PM base reservation to 256 bytes
and moves both GPIO and PM base to above 0x1000 on -LP
chipsets.
Change-Id: I747b658588a4d8ed15a0134009a7c0d74b3916ba
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This was put in for debugging and experimentation on i945
and has been copied around since. Drop it from lynxpoint.
Change-Id: I0b53f4e1362cd3ce703625ef2b4988139c48b989
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2814
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There are subtle yet significant differences in some of the
registers in the power management region between LynxPoint-H
and LynxPoint-LP.
In order to reduce code that is accessing these registers and
would need special cases this adds a number of helper functions
that can be used in both ramstage and SMM.
This commit just adds the new functions, subsequent commits will
start to use them.
Change-Id: I411da75da519f5b3198a408078cbf3114e426992
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2813
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
These base addresses are used in several places and it
is helpful to have one location that is reading it.
Change-Id: Ibf589247f37771f06c18e3e58f92aaf3f0d11271
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2812
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Add a helper function pch_is_lp() that will return 1 if
the current chipset is of the new "low power" variant used
with Haswell ULT.
Additionally these functions are added to SMM so it can
be used there.
Change-Id: I9acdea2c56076cd8d9627aba66cf0844c56a38fb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2811
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Mathias Krause