Update FSP header files to version 2.7.2.
New UPDs added
FspmUpd.h:
*CleanMemory
FspsUpd.h:
*IslVrCmd
*ThreeStrikeCounterDisable
Structure member names used to specify memory configuration
to MRC have been updated, SoC side romstage code is updated
to handle this change.
CQ-DEPEND=CL:*460573,CL:*460612,CL:*460592
BUG=b:65499724
BRANCH=None
TEST= Build and boot soraka, basic sanity check and suspend resume checks.
Change-Id: Ia4eca011bc9a3b1a50e49d6d86a09d05a0cbf151
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/21679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When selected, try to store and restore memory training
results from/to SPI flash. This change only pulls in
the required parts from vendorcode for the build.
Change-Id: I12880237be494c71e1d4836abd2d4b714ba87762
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: For some of the boards affected ACPI S3 support
was never tested but feature was just copy-paste from
reference design.
Change-Id: I2a54d605fa267a7501f57efd79a16b3bfa49891e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
The AMD firmware directory can go in a number of different locations.
This patch allows amdfwtool to write the directory correctly for those
different locations.
If the --location switch is not added to the command line, the default
location at ROM base address + 0x20000 is used as before.
BUG=b:65484600
TEST=Set PSP firmware location, compare amdfw.rom to previously built
version. Verify new location pointers.
Change-Id: Ief32e5e37d56088946b623d305c6e93bfd6abeaf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
GPP_C23 is read by vboot_handoff to set the WP flag. Thus, it has
to be configured in early_gpio_table.
BUG=b:67030973
BRANCH=none
TEST=Verify by wpsw_boot and wpsw_cur match.
Change-Id: I96f2b53d7bc0901ffccce46b2d8ddae80c002fdc
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch removes checks that ensure EC to be in RO for recovery
boot. We do not need these checks because when recovery is requested
automatically (as opposed to manually), we show 'broken' screen where
users can only reboot the device or request recovery manually.
If recovery is requested, Depthcharge will check whether EC is in RO
or not and recovery switch was pressed or not. If it's a legitimate
manual recovery, EC should be in RO. Thus, we can trust the recovery
button state it reports.
This patch removes all calls to google_chromeec_check_ec_image,
which is called to avoid duplicate memory training when recovery
is requested but EC is in RW.
BUG=b:66516882
BRANCH=none
CQ-DEPEND=CL:693008
TEST=Boot Fizz.
Change-Id: I45a874b73c46ea88cb831485757d194faa9f4c99
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The default for SPI_FLASH_INCLUDE_ALL_DRIVERS is y which already
includes this.
Change-Id: Ib2de0f384a547240528b18f07327566354164699
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch implements a relatively simple hash-based verification scheme
for downloaded files (tarballs):
After buildgcc downloads a file or notices that it has already been
downloaded, it hashes the file, and compares the hash against the known
hash stored in util/crossgcc/sum/$filename.cksum. Two errors can occur:
1. The hash file is missing. In this case, crossgcc asks the user to
verify the authenticity of the downloaded file. It also calculates
its hash and stores it in util/crossgcc/sum/$filename.cksum.calc.
If the file is authentic, the user may rename the calculated hash
file to $filename.cksum, so that it can be found the next time
buildgcc is started.
2. The known hash and the calculated hash differ. This is the case that
this patch seeks to protect against, because it may imply that the
downloaded file was unexpectedly changed, either in transit
(Man-in-the-Middle attack) or on the file server that it was
downloaded from. If buildgcc detects such a hash mismatch, it asks
the user to delete the downloaded file and retry, because it can also
be caused by a benign network error. If, however, the error persists,
buildgcc can't continue without risking that the user runs malicious
code, and it stops.
Note: The hash algorithm may be changed in the future, but for now I
left it at SHA-1, to avoid bloating this patch.
Change-Id: I0d5d67b34684d02011a845d00f6f5b6769f43b4f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently the WCOMCOHO registers a reset delay of 110ms to execute their
_ON_ asl power on method. This seems to be correct as per WACOM product
design specifications but it introduces an unwanted delay in overall system
resume time. This delay should be removed from ACPI critical path since the
entire kernel resume gets blocked on this sleep call unless this is over. In
the kernel I2C communication with WACOM driver starts with the resume
callbacks of I2C HID driver which gets triggered after display is completely
resumed. The display resume process takes at least 230ms so it's safe to
reduce the delay from coreboot and unblock the critical ACPI path.
BUG=b:65358919
BRANCH=None
TEST=manual testing on Soraka board to ensure that touchscreen works at boot
and after suspend/resume. Also verify that the overall S3 resume time is
reduced by 110ms.
Change-Id: I59d070977a95316414018af69d5b43e3147ccf4e
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Reviewed-on: https://review.coreboot.org/21692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add SMM support for Cannonlake on top of common SMM, also include the
SMM relocate support.
Change-Id: I9aab141c528709b30804d327804c4031c59fcfff
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable Skylake to use the new common LPC code. This
will help to reduce code duplication and streamline code bring up.
Change-Id: I042e459fb7c07f024a7f6a5fe7da13eb5f0dd688
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/20120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support for following functionality:
1. Set up PCH LPC interrupt routing.
2. Set up generic IO decoder range settings.
3. Enable CLKRUN_EN for power gating LPC.
Change-Id: Ib9359765f7293210044b411db49163df0418070a
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/21605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The HeapAllocateBuffer and HEAPDeallocateBuffer functions are not used
in Stoney Ridge, so get rid of them.
Change-Id: I716d5c8957ced52c25fd501697111b1b0b263467
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Allow the AMD FW directory to be placed at one of the alternative
locations within the ROM.
BUG=b:65484600
TEST=Assign PSP firmware location, build & test.
Change-Id: I9c95b9805c60ab6204750f7929049c7382e0c6cd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This code path was only triggered in one corner case: GFX UMA set to
48MiB. It created a hole below UMA to save MTRRs. But, this hole was
never accounted for when calculating cbmem_top(). Instead of trying
to fix it, remove it, it's not worth the trouble.
TEST=Booted lenovo/x200 with all available CMOS gfx_uma_size settings.
Change-Id: I3f4ceec4224d86113be9bfa3ce4759bed584640d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The Stoney Ridge UART and AMBA devices must be powered and report power
and clock OK prior to using the coreboot serial console. The code used
to have a delay to wait for the power and clock, but didn't check the
OK bits. This caused long delays on a reboot, as each byte would time out
until the console was reset again at romstage.
This change also removes the UART reset. The device has just been
powered and is in reset already. Testing indicates the reset isn't
needed.
BUG=b:65853981
TEST=Boot to Chrome OS, run the reboot command, verify that the long
delay is gone.
Change-Id: I410700df5df255d20b8e5d192c72241dd44cf676
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Half the files were being placed in build/agesa and half in
build/libagesa.
Change-Id: Ied69dafffe2eb3354bd430789e098a1cb1d40551
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Fix boot regression after commit
d4955f0 AGESA: Move API interface under drivers/
Boards were left without cache-as-ram setup code
and appeared completely dead.
Change-Id: I53a58b817310e91566db3fd660a2c41556f3df5f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
Do not check for the top of memory being 16MB-aligned near the end of
romstage. This is not the expected alignment using the default 8MB SMM
region size.
BUG=b:67320715
Change-Id: I6bf0b9141232dea1a3b02794fda7af08887df119
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21850
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
This patch moves the functions update_pm1_enable and read_pm1_enable
to common block PMC. We rename the functions to pmc_update_pm1_enable and
pmc_read_pm1_enable to keep semantics consistent.
Change-Id: I9a73a6348fc22367ee2e68bf2c31823ebfefc525
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/21755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Other than switch to use common gpio implementation for skylake based
platform, also apply the needed changes for purism board.
Change-Id: I06e06dbcb6d0d6fe277dfad57b82aca51f94b099
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/19201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the APMC-specific initialization call. Make the function
which programs the event type not static and call it from the
southbridge.c file.
Change-Id: I1e3cf898637720fa835de0a6e735c6a65fe2d3a2
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Rewrite the handler to be more compact and extendable. The old
functionality is duplicated after the rewrite. All SMI source registers
(except for SmiSciStatus) behave identically so these are consolidated.
Register 0x80 contains sources 0-31, 0x81 sources 32-63, and so on.
Create a table of mini-handlers to be supported in the soc directory.
As SMI sources are discovered, attempt to find the corresponding handler
and then execute it.
Change-Id: Ic7050ecf65c2af036fe297f429a0bbdc709ad4c1
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21746
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Use the currently programmed address of the SMI command port before
checking the passed command. This ensures we're reading the right
port in case the port was relocated without our knowledge.
Change-Id: I8a3ca285d3a9afd4a107cd471c202abf03f372ac
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Pull all pm_read and write, smi_read and write variants into a single
file.
Change-Id: I87d17361f923a60c95ab66e150445a6a0431b772
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Make pm_read16() consistent with the other PM register access functions.
Change-Id: Iba017b8090ed07d8684cc7f396a3e9a942b3ad95
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
This corrects a build error when a developer needs DEBUG_SMM and one
of the APU's internal UARTs is used.
Change-Id: Ie1962e969a8cb93eefc0b86bf4062752580e5acd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21740
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
RK3399 has a pin that can decide whether GPIO port 1 is driven with 1.8V
or 3.0V. We thought this mechanism was disabled by default, but it turns
out it wasn't. We want to use that pin as an output GPIO on Scarlet so
we need to reconfigure the respective SoC controls before we do that. It
seems that we also need to explicitly pinmux the pin away from that
special function (to normal GPIO) or weird things happen on some boards.
BUG=b:66534913
TEST=Sprinkled several long udelays, poked test points with a
multi-meter on Scarlet.
Change-Id: Ia02cbb4f3b2f14b0d958b84adcddb0c5f4259efa
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/21727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Julius made some suggestions to fix/improve commit 46300aa2.
Implement those.
BUG=b:66681446
Change-Id: I6becac9ffdcc65745e88734dfb80d12b581584a1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Hook the new required AGESA callout functions into the callouts tables.
BUG=b:66690176
TEST=Build and boot Kahlee - see the functions get called.
Change-Id: Ife9c2b20e59ede404edb1f700238e425fea35914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
These are required callout functions that currently are not implemented.
agesa_LateRunApTask does not seem to be called, but the others are.
BUG=b:66690176
TEST=Build Kahlee. Tested in next commit.
Change-Id: Iee5f9c4847a5309a25045fca8c73be4f811c281a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21707
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Ensure the stack is properly aligned in the SIPI handler. This
avoids an exception when an aligned instruction is performed on
stack data.
BUG=b:66003093
TEST=boot kahlee built with gcc 6.3
Change-Id: Ibdd8242494c6a2bc0c6ead7ac98be55149219d7c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Balaji Manigandan B