There is no need to repeat "import" for each module in GoLang. Use
this keyword only once in each file for code cleanliness.
Change-Id: Ibb24fafd409b31b174946a39ca1f810d59b87e76
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55985
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Avoid using deprecated macros, where possible.
"GpioResetPwrGood" represents multiple valid updated values, depending
on the GPIO community and will be more difficult to update.
While Kabylake supports both sets of macros, it will cause build errors
on Coffeelake. In the GPD group, replace with "GpioDswReset."
Replace with "GpioResumeReset" in any GPP group.
Change-Id: Iab0bb09adad997bef3a2133c443471d4c634f423
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Using the wrong registers to build the fields led to incorrect
GPIO direction and interrupt trigger values. Change the calls
to fix the tables.
Change-Id: Icbeeb1fec6a863d0f86659c21924e15ae6765d47
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54973
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With go1.16 the default for GO111MODULE changed to on which break
building this tool.
Change-Id: I93a516ff76c8da4b7f37157d58ecd4c0b09c582c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52862
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These were originally ignored only inside util/ but these files
shouldn't be tracked anywhere.
Change-Id: Ie0846bd8bdd6e52f420f9dd2e72a8a922102ff90
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There's no need for the global list of files to ignore, so use git's
ability to work with more local configuration.
Change-Id: I50882e6756cbc0fdfd899353cc23962544690fb3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46879
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the information format in the comments above the macros in the
generated gpio.h file:
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), /* LPSS_UART0_TXD */ -->(i)
/* GPIO_39 - LPSS_UART0_TXD */ --> (ii)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* _PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) |
PAD_TRIG(OFF), PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), */ --> (iiii)
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD),
Also, in the case of field macros:
/* GPIO_39 - LPSS_UART0_TXD */ --> (ii)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), */ --> (iiii)
PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF),
PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)),
By default, if do not use the -i... option, then additional information
in comments will not be generated.
TEST:
git clone https://github.com/maxpoliak/inteltool-examples.git test
./intelp2m -n -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld cb -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld fsp -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld raw -file test/inteltool-asrock-h110m-stx.log
Before and after (now with -i key) the patch, gpio.h is no different.
Change-Id: I760f4aadece786ea455fb7569f42e06fefce2b61
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45168
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for Cannonlake-LP SoCs (Whiskeylake-U,
Coffeelake-U, Cometlake-U) as a separate parsing profile,
copying the existing 'Sunrise' profile and adjusting for differences
in reset mapping and GPIO macro generation
Test: convert inteltool GPIO log dump into coreboot macros for
an out-of-tree CML-U board.
Change-Id: I86296697ee892af7aa0818fb608b6d68fad2f307
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
This patch adds a new utility for converting a pad configuration from
the inteltool dump to the PAD_CFG_*() macros [1] for coreboot and GPIO
config data structures for FSP/sdk2-platforms/slimbootloader [2,3].
Mirror: https://github.com/maxpoliak/pch-pads-parser.git
[1] src/soc/intel/common/block/include/intelblocks/gpio_defs.h
[2] https://slimbootloader.github.io/tools/index.html#gpio-tool
[3] 3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Include/GpioSampleDef.h
Change-Id: If3e3b523c4f63dc2f91e9ccd16934e3a1b6e21fa
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35643
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Maxim Polyakov