In case of console dump for only the last boot, cbmem utility checks
for a list of regex in provided order. When pre-cbmem console
overflows, "Pre-CBMEM <stage> console overflowed.. " message is added
before "... <stage> starting" message. This change fixes the order of
regex in cbmem utility to match this.
Test=Verified on soraka that "cbmem -1" correctly dumps the data
starting from Pre-CBMEM romstage overflowed.
Change-Id: I9c5667bbd02ed3e93ac77a4f42e87d754a062919
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/23800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch syncs ec_commands.h with the one in chromeec.
BUG=b:70294260
BRANCH=none
TEST=Verify SKU_ID and OEM_ID are correctly recognized on Fizz.
Change-Id: I451ec9f6f9d7257915b7d4cb1e5adbee82d107de
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Fizz fails to show pictures on a type-c monitor because VBIOS runs
before DisplayPort link is ready.
With this patch, when firmware needs to display something, Fizz calls
google_chromeec_wait_for_display to make sure display is ready.
The penalty is up to 2 sec per boot in dev and rec boot. Normal boot
won't affected unless there is EC update.
BUG=b:72387533
BRANCH=none
TEST=Verify screens are displayed on Fizz as follows:
1. Put DUT in normal mode
2. Flash EC image to trigger EC sync (critical update)
3. Trigger manual recovery (insert)
4. Hit ctrl+d to switch to dev mode (to-dev)
5. Confirm to reboot (dev warning)
6. Warm reboot (dev warning)
7. Cold reboot (dev warning)
8. Flash EC image to trigger EC sync (critical update)
9. Trigger manual recovery (insert)
Change-Id: I90befe94f93e13904987acda50b2598d034b0031
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The google_chromeec_wait_for_display API checks whether a display is
ready or not. It waits in a loop until EC says it entered DisplayPort
alternative mode or times out in 2 seconds.
BUG=b:72387533
BRANCH=none
TEST=See 23746 "mb/google/fizz: Wait until display is ready"
Change-Id: Ieee5db77bd6e147936ea8fc735dcbeffec98c0f8
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The google_chromeec_pd_get_amode API checks whether TCPM is in a
specified alternate mode or not.
BUG=b:72387533
BRANCH=none
TEST=See 23746 "mb/google/fizz: Wait until display is ready"
Change-Id: Ib9b4ad06b61326fa167c77758603e038d817f928
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This makes the flow for GPIO initialization more closely follow that
what is performed for other boards so that it's easier to read the flow
(and stops relying on BS_WRITE_TABLES).
BUG=b:72875858
TEST=Built and booted grunt, built gardenia.
Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/23679
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Soraka, Poppy & Nautilus are designed to operate at max power of
45 Watt. Hence set psys_max to 45W.
BUG=b:66066340
BRANCH=None
TEST=Build and boot soraka.
Change-Id: If6f624733830b462329b5f539c20e2aea664143e
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/23757
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Move the remaining model_15_init.c functionality to cpu.c, making it
similar to other soc implementations.
Change-Id: Ic8c62b09209fcdaa50ff8ffc7773ef155f979a1b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/23724
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
board_status.sh was originally written for use cases where the DUT
is remote, i.e. accessed via serial port or SSH. This lead to some
issues when attempting to run the script on the DUT itself.
This patch attempts to handle the local use case more gracefully.
sudo is used when running the cbmem command, and the '-c' option
can be used to set cbmem path in case it's not in the default path
used by sudo.
Change-Id: I62957678ccae65fc46fd6ddf5ae92983d36cffad
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/21566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It doesn't make much sense to try and obtain dmesg via SSH if we're
using the serial port. Serial should only be used to obtain dmesg if
SSH is unavailable.
Change-Id: Iec70e64666f9446cf7e98a0fbcaa1cd5cefd8898
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/21567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add the X86_AMD_FIXED_MTRRS select back to Kconfig. This got lost
when stoneyridge was converted from a cpu/northbridge/southbridge
implementation to soc/.
Remove the setup from model_15_init.c because this is duplicated
functionality.
BUG=b:68019051
TEST=Boot Kahlee, check steps with HDT
Change-Id: Id5526dcff12555efccab811fa3442ba1bff051bb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/23723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
AMD's fixed MTRRs have RdDram and WrDram bits that route memory
accesses to DRAM vs. MMIO. These are typically hidden for normal
operation by clearing SYS_CFG[19] (MtrrFixDramModEn). According to
BKDGs and AMD64 Programmer's Manual vol 2, this bit is clear at
reset, should be set for configuration during POST, then cleared for
normal operation.
Attempting to modify the RdDram and WrDram settings without unhiding
them causes a General Protection Fault. Add functions to enable and
disable MtrrFixDramModEn. Unhide/hide as necessary when copying or
writing the fixed MTRRs.
Finally, modify sipi_vector.S to enable the bits prior to writing
the fixed MTRRs and disable when complete.
This functionality is compiled out on non-AMD platforms.
BUG=b:68019051
TEST=Boot Kahlee, check steps with HDT
Change-Id: Ie195131ff752400eb886dfccc39b314b4fa6b3f3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/23722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The board does no support eMMC so no need to configure it.
Change-Id: If29009a09f39484b1da16fb650b4f9cbee2a6d19
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/23739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The board does not have memory down, only 2 DDR4 Slots.
Change-Id: I70eda83fbce7a707da170c7e555ed1a6dc6b1f4a
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/23738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Use the correct conversion specifier `z` for `size_t` to fix the error
below.
```
error: format '%lx' expects argument of type 'long unsigned int', but \
argument 4 has type 'size_t {aka unsigned int}' [-Werror=format=]
```
Found-by: gcc (Debian 7.3.0-3) 7.3.0
Change-Id: I05d3b6c9eec0ebf77cdb9e9928037e837f87ea03
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/23770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SMBIOS structure type 17 is not being generated because memory info is
not being stored to cbmem. This has to happen after AGESA AmdInitLate
has run, but before SMBIOS is generated. There's a need to convert
format between AGESA generated info, and what is required in cbmem.
Create a procedure that transfers information between AGESA and cbmem,
and call it from agesawrapper_post_device() after AmdLateInit is called.
BUG=b:65403853
TEST=build and run kahlee, verify if SMBIOS structure type 17 is being
generated, and if associated strings are what should be expected.
Change-Id: I151a8f1348c9bafceb38bab1f79d3002c5f6b31b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable the micro-controller interrupt line as a real IRQ.
BUG=b:71986991
BRANCH=none
TEST=on Meowth, run 'ectool --name=cros_fp fpmode capture' and see the
number of interrupts incrementing and the MKBP event happening.
Change-Id: Ic0cf03d2a3508148b6482a5a595eaa213eff52c7
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://review.coreboot.org/23769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO pin definition had been updated to match Cannonlake PCH-LP EDS,
hence the ACPI dsdt table will include those changes as well.
BUG=None
TEST=Build coreboot image, flah coreboot image into DUT, and target
system can boot up into OS.
Change-Id: I958e0cb71b4e656bec9bfe2d12076b577b57629b
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/23664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Switch to use common version of PCR asl.
BUG=NONE
TEST=Boot up into chrome OS properly on cannonlake rvp platform.
Change-Id: I4975704434d4743bcc0fb6062115da349166c3a6
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/23699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Add group information for each gpio community and use it to
calculate offset of a pad within its group. Original implementation
assumed that the number of gpios in each group is same but that lead to
a bug for cnl since numbers differ for each group.
BUG=b:69616750
TEST=Need to test again on SKL,CNL,APL,GLK
Change-Id: I02ab1d878bc83d32222be074bd2db5e23adaf580
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/22571
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Access to PCH Private Configuration Space Register can be addressed via
SBERG_BAR, the method is generic across several generations of Intel
SOC.
BUG=None
TEST=None
Change-Id: Iaf8c386824ee08cb93cb419ce3cdb2d3fe22a026
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/23698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The USBHID driver zero-initializes some but not all of the fields in its
usbhid_inst_t structure. This is a problem because under some
circumstances, some of the uninitialized fields may be read and lead to
incorrect behavior. Some (broken) USB keyboards keep sending reports
that contain all zeroes even when they have no new keys... these usually
get silently ignored, but if the usbhid_inst_t structure is in an
inconsistent state where 'previous' is zeroed out but 'lastkeypress'
is non-zero because it wasn't properly initialized, these reports will
be interpreted as keyrepeats of the bogus 'lastkeypress'. This patch
changes the code to just xzalloc() the whole structure so we won't have
to worry about initialization issues anymore.
Change-Id: Ic987de2daaceaad2ae401a1e12b1bee397f802ee
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Turns out the write-protect GPIO polarity for Scarlet is different than
for Kevin/Gru, and nobody ever told us. Also, it must not be configured
with an internal pull-up or we'll not read the correct value. This patch
fixes both issues.
BRANCH=scarlet
BUG=b:73356326
TEST=Booted Scarlet, confirmed that crossystem wpsw_boot returns the
right value in all cases.
Change-Id: Idd348ecdf9da8fff7201b83e869ba097b8570f32
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change enables DPTF and configures the policy. DPTF parameters were
provided by internal power team.
BUG=b:67877437
BRANCH=master
TEST=emerge-nautilus coreboot
Change-Id: I31b31d5282ab38278bc68045ce75fdc6192f1144
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/23731
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently, at the end of a build `CBFSPRINT` prints the content of all
CBFS regions. This is confusing, as they are identical. To avoid
confusion print the layout beforehand.
> layout [-w] – List mutable (or, with -w, readable) image regions
Change-Id: Ibf03b125ef6dae41c58b8ae867430047778cfff3
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/22143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Read cse file was not getting cached and taking about 500ms on every boot.
Change-Id: I8c92eefc64fe146c628d9c104d7dfb016204004c
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/23743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Procedures acpi_device_scope() and acpi_device_name() can under certain
conditions return NULL. Check the return before using them.
This fixes CID 1385944
BUG=b:73331544
TEST=Build kahlee.
Change-Id: Ifcdf905100d22a1d828394f8685641eb432bb836
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23760
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Kconfig variables TIANOCORE_REVISION and TIANOCORE_REVISION_ID
do not have an effect without this fix, the build process would
checkout the hard-coded stable hash even if these variables are set.
Change-Id: I9711a370eeade3cba0a9e127deb3d96d82adc512
Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
Reviewed-on: https://review.coreboot.org/22983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Show mainboard version in the console log so that one can easily see it.
Change-Id: I33bae8b340fce13c0cbe525521828929038b069a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/23750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The I/O expander on the mc_bdx1 is used to get the hardware version of
the mainboard. This patch enables the chip driver for the I/O expander.
Change-Id: I98c667fe4dccf0698ab4cb5ede6082f020c70ec6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/23749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The chip PCA9538 is a 8 bit I/O expander connected to the systems I2C
bus. Add a chip driver to support this chip.
Beside the pure chip driver two interface functions are provided to read
the state of the pins and write output values to the pins.
As the slave address of this chip is hardware configurable the function
pca9538_get_dev() is used to get the right slave address. This function
needs to be implemented in mainboard code if one needs to use the
interface functions to read and write I/O state.
Change-Id: Ic856123b4f4c8b721928ee3a2a4bb37833ea4b20
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/23748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This format (one hex digit, followed by 'b', followed by binary digits)
is arguably useful, but also confusing. Use the more common format
instead.
Change-Id: Ide7b0a999483a2dd863a70f8aa42cd0865e2babf
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
LAPIC setup is required to set virtualwire mode for legacy interrupts.
This was omitted when stoneyridge was changed to use the common mp_init.
BUG=b:72351388
TEST=Verify keyboard now works in SeaBIOS
Change-Id: I648d8b5b5a3744a5781446c7cb72934a071f9a72
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/23718
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original SPD provided by the vendor had bytes after 254 shifted by 16
bytes. This change fixes the SPD data based on the latest details
received from the vendor.
BUG=b:72749394
TEST=Verified that the device with this memory part boots to OS fine.
Also, mosys is able to dump the right memory information.
Change-Id: I6938dea761c5785048aad69eeeaf50e2d0fa8ca1
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/23729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds a struct for registers along with some bits from ATF to
the generic PL011 driver. It also adds a naive implementation of
uart_tx_flush() which was previously stubbed out.
Change-Id: Iee3fc6308cb92ad784e5ff3ac3a6e995d535be65
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/23031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
There are now a few architectural extensions available for ARMv8, some
of which introduce instructions or other features that may be useful.
This allows the user to select an extension implemented on their SoC
which will set the -march option passed into the compiler.
Change-Id: Ifca50dad98aab130ac04df455bac2cfb65abf82e
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/23641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Furquan Shaikh