Commit Graph

1596 Commits

Author SHA1 Message Date
Frank Rysanek c0c620e74a superiotool: add CR dump for W83627UHG = NCT6627UD
This commit adds "register dump capability" to
superiotool for a specific chip by Winbond/Nuvoton:
the W83627UHG   AKA   NCT6627UD  (same chip, different package).
In other words, it fills in the "CR map" definitions in winbond.c,
which so far have been void for this chip.
-
superiotool r4.0-3976-g190011e
Found Winbond W83627UHG = NCT6627UD (id=0xa2, rev=0x32) at 0x2e
Register dump:
idx 02 20 21 22 23 24 25 26  27 28 29 2a 2b 2c 2d 2e  2f
val ff a2 32 ff f0 44 00 00  ff 00 00 00 00 03 00 00  ff
def 00 a2 NA ff f0 MM 00 MM  RR 00 00 00 00 02 00 00  00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f4 f5
val 00 00 00 00 02 8e 00 ff  00 00
def 01 03 f0 06 02 8e 00 ff  00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 00 03 78 0c 04 3f
def 01 03 78 07 04 3f
LDN 0x02 (UART A)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (UART B)
idx 30 60 61 70 f0 f1
val 01 02 f8 03 00 44
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 82
def 01 00 60 00 64 01 0c 83
LDN 0x06 (UART C)
idx 30 60 61 70 f0
val 01 03 e8 05 80
def 01 03 e0 04 00
LDN 0x07 (GPIO 3, GPIO 4)
idx 30 e0 e1 e2 e3 e4 e5 e6  e7
val 04 ff ff ff ff ff ff ff  ff
def 00 ff 00 00 00 ff 00 00  00
LDN 0x08 (WDTO#, PLED, GPIO 5,6 & GPIO Base Address)
idx 30 60 61 e0 e1 e2 e3 e4  e5 e6 e7 f5 f6 f7
val 01 00 00 ff ff ff ff ff  ff ff ff 02 00 00
def 02 00 00 ff 00 00 00 ff  1f 00 00 00 00 00
LDN 0x09 (GPIO 1, GPIO 2 and SUSLED)
idx 30 e0 e1 e2 e3 e4 e5 e6  e7 f3
val 02 ff ff ff ff 00 ff 00  00 00
def 00 ff 00 00 00 ff 00 00  00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5  e6 e7 e8 e9 f2 f3 f4 f6  f7 fe
val 01 00 01 00 0a 00 00 00  0c 00 09 00 01 00 00 00  00 00
def 00 00 01 00 ff 08 00 00  1c 00 RR RR 3e 00 00 00  00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70 f0 f1 f2
val 01 02 48 00 81 ff 81
def 00 00 00 00 RR RR 00
LDN 0x0c (PECI, SST)
idx e0 e1 e2 e3 e4 e5 e6 e7  e8 f1 f2 f3 fe ff
val 00 48 48 48 48 00 00 00  00 4c 50 10 23 5a
def 00 48 48 48 48 00 RR RR  00 48 50 10 23 5a
LDN 0x0d (UART D)
idx 30 60 61 70 f0
val 00 00 00 00 00
def 00 02 e0 03 00
LDN 0x0e (UART E)
idx 30 60 61 70 f0
val 00 00 00 00 80
def 00 03 e8 04 00
LDN 0x0f (UART F)
idx 30 60 61 70 f0
val 01 02 38 0a 00
def 00 02 e8 03 00

Change-Id: I834f8767b29f3148f353004edb22cfd7db5ddd56
Signed-off-by: Frank Rysanek <Frantisek.Rysanek@post.cz>
Reviewed-on: http://review.coreboot.org/3027
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-04-22 17:07:13 +02:00
Paul Menzel 8d9ffd93b5 cbmem: map_memory: Use length modifier `j` and cast for an `off_t` argument
cbmem currently fails to build due to `-Werror` and the following
warning.

    $ make
    cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86  -c -o cbmem.o cbmem.c
    cbmem.c: In function ‘map_memory’:
    cbmem.c:87:2: error: format ‘%zx’ expects argument of type ‘size_t’, but argument 2 has type ‘off_t’ [-Werror=format]
    […]

Casting the argument of type `off_t` to `intmax_t` and using the
length modifier `j`

    $ man 3 printf
    […]
           j      A following integer conversion corresponds to an intmax_t or uintmax_t argument.
    […]

instead of `z` as suggested in [1] and confirmed by stefanct and
segher in #coreboot on <irc.freenode.net>, gets rid of this warning
and should work an 32-bit and 64-bit systems, as an `off_t` fits
into `intmax_t`.

[1] http://www.pixelbeat.org/programming/gcc/int_types/

Change-Id: I1360abbc47aa1662e1edfbe337cf7911695c532f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3083
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-16 17:46:28 +02:00
Paul Menzel 17c05f23e2 inteltool: pcie.c: Use `0xffULL` instead of `0xff` to avoid shift overflow
When building inteltool with Clang, it warns about the following.

    $ clang --version
    Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2)
    Target: i386-pc-linux-gnu
    Thread model: posix
    $ CC=clang make
    […]
    clang -O2 -g -Wall -W   -c -o pcie.o pcie.c
    pcie.c:297:40: warning: signed shift result (0xFF0000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
                    pciexbar_phys = pciexbar_reg & (0xff << 28);
                                                    ~~~~ ^  ~~
    pcie.c:301:41: warning: signed shift result (0xFF8000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
                    pciexbar_phys = pciexbar_reg & (0x1ff << 27);
                                                    ~~~~~ ^  ~~
    pcie.c:305:41: warning: signed shift result (0xFFC000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow]
                    pciexbar_phys = pciexbar_reg & (0x3ff << 26);
                                                    ~~~~~ ^  ~~
    3 warnings generated.
    […]

Specifying the length by using the suffix `0xffULL` fixes these issues
as now enough bits are available.

These issues were introduced in commit 1162f25a [1].

    commit 1162f25a49
    Author: Stefan Reinauer <stepan@coresystems.de>
    Date:   Thu Dec 4 15:18:20 2008 +0000

        Patch to util/inteltool:
        * PMBASE dumping now knows the registers.
        * Add support for i965, i975, ICH8M
        * Add support for Darwin OS using DirectIO

[1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=1162f25a49e8f39822123d664cda10fef466b351

Change-Id: I7b9a15b04ef3bcae64e06266667597d0f9f07b79
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3015
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-15 19:03:19 +02:00
Paul Menzel c3fc1e05a6 cbmem: Makefile: Allow to override `CC` variable
Now users can use a different compiler from GCC like Clang by for example
doing `CC=clang make`.

Change-Id: I664a36df79f7496a56d89bdb61948b2eda33a6b4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3082
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-15 07:00:23 +02:00
Paul Menzel 15a1fd1db9 inteltool: Use portable type `uint64_t` instead of `u64`
In [1] Idwer Vollering noted, that the type `u64` is not portable so
on his FreeBSD system, the following warning is shown.

    $ clang -O2 -Wall -W -I/usr/local/include   -c -o amb.o amb.c
    amb.c:441:22: error: use of undeclared identifier 'u64'
                    ambconfig_phys = ((u64)pci_read_long(dev16, 0x4c) << 32) |

The type `uint64_t` seems to be defined also on FreeBSD, so using this
fixes the warning.

Note, this warning is not reproducable with Debian Sid/unstable for
example. I have no idea why though.

[1] http://review.coreboot.org/#/c/3015/

Change-Id: Ic22f4371114b68ae8221d84a01fef6888d43f365
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3086
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-14 23:00:35 +02:00
Paul Menzel cb891de07f cbmem: parse_cbtable: Use length modifier `ll` `u64` argument
Currently on a 32-bit system cbmem fails to build due to `-Werror`
and the following warning.

    $ make
    cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86  -c -o cbmem.o cbmem.c
    […]
    cbmem.c: In function ‘parse_cbtable’:
    cbmem.c:135:2: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘u64’ [-Werror=format]
    cc1: all warnings being treated as errors
    […]

Using the length modifier `ll` instead of `l` gets rid of this
warning.

Change-Id: Ib2656e27594c7aaa687aa84bf07042933f840e46
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-14 02:06:21 +02:00
Paul Menzel 2c8f81b57b cbfstool: cbfs-mkstage.c: Free `buffer` on error path
Cppcheck warns about a memory leak, present since adding romtool,
which was renamed to cbfstool, in commit 5d01ec0f.

    $ cppcheck --version
    Cppcheck 1.59
    […]
    [cbfs-mkstage.c:170]: (error) Memory leak: buffer
    […]

Indeed the memory pointed to by `buffer` is not freed on the error path,
so add `free(buffer)` to fix this.

Change-Id: I6cbf82479027747c800c5fe847f20b779e261ef4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3069
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-12 20:22:39 +02:00
Idwer Vollering e76d8d7ced acpica: update URL
The URL to acpica-unix-20121114 has changed, update the URL.

Change-Id: I1c8c228094f19455af3682f36f1990586fe3934c
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3070
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-12 20:15:51 +02:00
Vladimir Serbinenko f4a0d019fa util/cbmem: Don't output trailing garbage for cbmemc
Current code outputs the whole cbmemc buffer even if only part of
it is really used. Fix it to output only the used part and notify
the user if the buffer was too small for the required data.

Change-Id: I68c1970cf84d49b2d7d6007dae0679d7a7a0cb99
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/2991
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-09 23:52:36 +02:00
Stefan Reinauer 33e83caff5 cbfstool: completely initialize input and output streams
The LZMA glue code in cbfstool was recently rewritten from C++
to plain C code in:

        commit aa3f7ba36e
        Author: Stefan Reinauer <reinauer@chromium.org>
        Date:   Thu Mar 28 16:51:45 2013 -0700

            cbfstool: Replace C++ code with C code

            Reviewed-on: http://review.coreboot.org/3010

In the progress of doing so, the stream position for the
input stream and output stream was not reset properly. This
would cause LZMA producing corrupt data when running the
compression function multiple times.

Change-Id: I096e08f263aaa1931517885be4610bbd1de8331e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3040
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08 21:36:37 +02:00
Stefan Tauner 0c8b7d1ac2 inteltool: remove unused file descriptor variable and ifdefs
Change-Id: I6a119b1f362f481914377e8d14c713159f895130
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3030
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08 18:17:59 +02:00
Stefan Tauner 0dc775e894 inteltool: use inttypes for prints in memory.c
This fixes at least one warning on my machine where "llx" is replaced by PRIx64.

Change-Id: Iee3e5027d327d4d5f8e6d8b2d53d051f74bfc354
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/3024
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-05 20:21:35 +02:00
Paul Menzel 5f3754e66d inteltool: cpu.c: Use conversion specifier `u` for unsigned integers
Cppcheck [1], a static code analysis tool, warns about the
following.

    $ cppcheck --version
    Cppcheck 1.59
    $ cppcheck --enable=all .
    […]
    Checking cpu.c...
    [cpu.c:951]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list.
    [cpu.c:962]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list.
    […]

And indeed, `core` is an unsigned integer and `man 3 printf` tells
the following about conversion specifiers.

       d, i   The int argument is converted to signed decimal notation. […]

       o, u, x, X
              The unsigned int argument is converted to unsigned octal (o), unsigned decimal (u), or  unsigned  hexadecimal  (x  and  X)
              notation.

So use `u` and Cppcheck does not complain anymore.

[1] http://cppcheck.sourceforge.net/

Change-Id: If8dd8d0efe75fcb4af2502ae5100e3f2062649e4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3026
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-05 20:17:03 +02:00
Paul Menzel 72ef8881a3 libpayload, superiotool: README: Prepend `coreboot/` to path of change directory line
Nico Huber spotted [1], that commit (4d6ab4e2) [1] updating
superiotools’s `README` with the Git command line

    superiotool: Update README with Git repository URL and directory location

missed, that after `git clone` one sitll has to change into
the cloned directory.

So prepend the path with `coreboot/` to fix that. The same error
happened in the commit (e1ea5151) for libpayload [2]

    libpayload: Update README with Git repository URL and directory location

and is fixed in this patch too.

[1] http://review.coreboot.org/#/c/3019/
[2] http://review.coreboot.org/2228

Change-Id: Ib6e8b678af6276556a40ccfd52ae35ca7e674455
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3021
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-04 17:22:15 +02:00
Paul Menzel 3402a7fa70 inteltool: Cast to `intptr_t` instead of `uint64_t`
When building inteltool under x86-32, the following warnings are
shown.

    $ gcc --version
    gcc-4.7.real (Debian 4.7.2-15) 4.7.2
    Copyright (C) 2012 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    $ make
    […]
    amb.c: In function ‘amb_read_config32’:
    amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    amb.c: In function ‘amb_read_config16’:
    amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    amb.c: In function ‘amb_read_config8’:
    amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    […]

Nico Huber commented the following [1].

    I don't see those warnings because I build for x86-64. I guess
    they could be fixed by casting to `ptrdiff_t` (from stddef.h)
    instead of `uint64_t`.

And indeed, using `ptrdiff_t` fixes the warning. But as Stefan
Reinauer commented in [2], `intptr_t` is more appropriate as this
is just a pointer and no pointer difference.

So `intptr_t` is taken, which fixes these issues warned about too.

These warnings were introduced in commit »inteltool: Add support for
dumping AMB registers« (4b7b320f) [3].

[1] http://review.coreboot.org/#/c/2996/1//COMMIT_MSG
[2] http://review.coreboot.org/#/c/3002/1/util/inteltool/amb.c
[3] http://review.coreboot.org/525

Change-Id: I2ea1a31dc1e3db129e767d6a9e0433fd75a77d0f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3002
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-04 14:24:25 +02:00
Paul Menzel 4d6ab4e2ae superiotool: Update README with Git repository URL and directory location
Change-Id: I36d980cea5ca9cc67262dba809441091757e1fb5
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3019
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-04 04:50:00 +02:00
Paul Menzel a8db717d4a inteltool: Use `ll` instead of `l` as the length modifier for `uint64_t`
When buidling inteltool with GCC, the following warning is printed.

    $ make
    […]
    gcc -O2 -g -Wall -W   -c -o memory.o memory.c
    memory.c: In function ‘print_mchbar’:
    memory.c:287:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ [-Wformat]
    […]

This was introduced in commit »inteltool: Add support for H65 Express
chipset« (c7fc4422) [1].

Address this warning, by using `%llx` instead of `%lx`.

[1] http://review.coreboot.org/1258

Change-Id: I4f714edce7e8b405e1a7a417d02fa498322c88a8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2994
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Tested-by: build bot (Jenkins)
2013-04-03 11:13:29 +02:00
Stefan Reinauer aa3f7ba36e cbfstool: Replace C++ code with C code
cbfstool was using a C++ wrapper around the C written LZMA functions.
And a C wrapper around those C++ functions. Drop the mess and rewrite
the functions to be all C.

Change-Id: Ieb6645a42f19efcc857be323ed8bdfcd9f48ee7c
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3010
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-03 02:35:28 +02:00
Stefan Reinauer 60a4a73fcd cbfstool: fix --machine
The help text says --machine, but the code
actually checked for --arch. Fix it!

Change-Id: Ib9bbf758b82ef070550348e897419513495f154b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3009
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-02 20:27:10 +02:00
Paul Menzel 9ebd8ea7cf inteltool: Allow to override Makefile variables
Allow to override the variables `CC`, `INSTALL`, `PREFIX`,
`CFLAGS` and `LDFLAGS`. Though append `-lpci -lz` to `LDFLAGS`.

This way for example a different compiler can easily be used.

    CC=clang make

As a side note, Clang in contrast to GCC does *not* issue the
following warnings.

    $ clang --version
    Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2)
    Target: i386-pc-linux-gnu
    Thread model: posix
    $ gcc --version
    gcc-4.7.real (Debian 4.7.2-15) 4.7.2
    Copyright (C) 2012 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    $ make
    […]
    amb.c: In function ‘amb_read_config32’:
    amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    amb.c: In function ‘amb_read_config16’:
    amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    amb.c: In function ‘amb_read_config8’:
    amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    […]

These are only shown under 32-bit and not 64-bit

    $ uname -m
    i686

and are going to be fixed in a separate patch.

Change-Id: Id75dea081ecb35390f283520a7e5dce520f4c98d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2996
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01 22:40:45 +02:00
Nico Huber 42c5501c39 inteltool: Add Cougar/Panther Point GPIO defaults
This adds default values for the GPIO setup on Intel's Cougar Point and
Panther Point platform controller hubs (PCH). Values are taken from [1] and
[2], respectively. I've tested this with an H77 PCH. See below for the
output.

[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
    Document-Number: 324645-006

[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
    Datasheet
    Document-Number: 326776-003

$ ./inteltool -G
CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9
Northbridge: 8086:0150 (unknown)
Southbridge: 8086:1e4a (H77)

========== GPIO DIFFS ===========

GPIOBASE = 0x0500 (IO)

gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL)
gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT
gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF

gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL)
gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT
gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF

gpiobase+0x000c: 0xe1f17f7e (GP_LVL)
gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT
gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF

gpiobase+0x002c: 0x00002000 (GPI_INV)
gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT
gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF

gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2)
gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT
gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF

gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2)
gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT
gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF

gpiobase+0x0038: 0xb65e7f4f (GP_LVL2)
gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT
gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF

gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3)
gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT
gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF

gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3)
gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT
gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF

gpiobase+0x0048: 0x00000dfc (GPIO_LVL3)
gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT
gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF

gpiobase+0x0060: 0x00000000 (GP_RST_SEL1)
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF

$ ./inteltool -gG
CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9
Northbridge: 8086:0150 (unknown)
Southbridge: 8086:1e4a (H77)

============= GPIOS =============

GPIOBASE = 0x0500 (IO)

gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL)
gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT
gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF
gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL)
gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT
gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF
gpiobase+0x0008: 0x00000000 (RESERVED)
gpiobase+0x000c: 0xe1f17f7e (GP_LVL)
gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT
gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF
gpiobase+0x0010: 0x00000000 (RESERVED)
gpiobase+0x0014: 0x00000000 (RESERVED)
gpiobase+0x0018: 0x00040000 (GPO_BLINK)
gpiobase+0x001c: 0x00000000 (GP_SER_BLINK)
gpiobase+0x0020: 0x00080000 (GP_SB_CMDSTS)
gpiobase+0x0024: 0x00000000 (GP_SB_DATA)
gpiobase+0x0028: 0x0000     (GPI_NMI_EN)
gpiobase+0x002a: 0x0000     (GPI_NMI_STS)
gpiobase+0x002c: 0x00002000 (GPI_INV)
gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT
gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF
gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2)
gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT
gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF
gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2)
gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT
gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF
gpiobase+0x0038: 0xb65e7f4f (GP_LVL2)
gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT
gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF
gpiobase+0x003c: 0x00000000 (RESERVED)
gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3)
gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT
gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF
gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3)
gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT
gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF
gpiobase+0x0048: 0x00000dfc (GPIO_LVL3)
gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT
gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF
gpiobase+0x004c: 0x00000000 (RESERVED)
gpiobase+0x0050: 0x00000000 (RESERVED)
gpiobase+0x0054: 0x00000000 (RESERVED)
gpiobase+0x0058: 0x00000000 (RESERVED)
gpiobase+0x005c: 0x00000000 (RESERVED)
gpiobase+0x0060: 0x00000000 (GP_RST_SEL1)
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF
gpiobase+0x0064: 0x00000000 (GP_RST_SEL2)
gpiobase+0x0068: 0x00000000 (GP_RST_SEL3)
gpiobase+0x006c: 0x00000000 (RESERVED)
gpiobase+0x0070: 0x00000000 (RESERVED)
gpiobase+0x0074: 0x00000000 (RESERVED)
gpiobase+0x0078: 0x00000000 (RESERVED)
gpiobase+0x007c: 0x00000000 (RESERVED)

Change-Id: If99cf8d5c93e34ad28f52080fff64e01c220eb27
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/3001
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01 22:39:30 +02:00
Nico Huber 09dcbf0cdb inteltool: Add option to show differences in GPIO setup
This adds an option -G, --gpio-diffs to inteltool, which shows GPIO settings
that differ from platform defaults. For differing registers, the current,
the default, and an xor of the default and the current value is printed. A
follow-up commit will add defaults for the Cougar/Panther Point platform
controller hubs. If you specify both, -g and -G on the command line, all
GPIO registers will be printed interleaved with the diff.

Here's a preview:

$ ./inteltool -G
CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9
Northbridge: 8086:0150 (unknown)
Southbridge: 8086:1e4a (H77)

========== GPIO DIFFS ===========

GPIOBASE = 0x0500 (IO)

gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL)
gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT
gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF

gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL)
gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT
gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF

gpiobase+0x000c: 0xe1f17f7e (GP_LVL)
gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT
gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF

gpiobase+0x002c: 0x00002000 (GPI_INV)
gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT
gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF

gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2)
gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT
gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF

gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2)
gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT
gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF

gpiobase+0x0038: 0xb65e7f4f (GP_LVL2)
gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT
gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF

gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3)
gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT
gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF

gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3)
gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT
gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF

gpiobase+0x0048: 0x00000dfc (GPIO_LVL3)
gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT
gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF

gpiobase+0x0060: 0x00000000 (GP_RST_SEL1)
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF

$ ./inteltool -gG
CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9
Northbridge: 8086:0150 (unknown)
Southbridge: 8086:1e4a (H77)

============= GPIOS =============

GPIOBASE = 0x0500 (IO)

gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL)
gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT
gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF
gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL)
gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT
gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF
gpiobase+0x0008: 0x00000000 (RESERVED)
gpiobase+0x000c: 0xe1f17f7e (GP_LVL)
gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT
gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF
gpiobase+0x0010: 0x00000000 (RESERVED)
gpiobase+0x0014: 0x00000000 (RESERVED)
gpiobase+0x0018: 0x00040000 (GPO_BLINK)
gpiobase+0x001c: 0x00000000 (GP_SER_BLINK)
gpiobase+0x0020: 0x00080000 (GP_SB_CMDSTS)
gpiobase+0x0024: 0x00000000 (GP_SB_DATA)
gpiobase+0x0028: 0x0000     (GPI_NMI_EN)
gpiobase+0x002a: 0x0000     (GPI_NMI_STS)
gpiobase+0x002c: 0x00002000 (GPI_INV)
gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT
gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF
gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2)
gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT
gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF
gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2)
gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT
gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF
gpiobase+0x0038: 0xb65e7f4f (GP_LVL2)
gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT
gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF
gpiobase+0x003c: 0x00000000 (RESERVED)
gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3)
gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT
gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF
gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3)
gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT
gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF
gpiobase+0x0048: 0x00000dfc (GPIO_LVL3)
gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT
gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF
gpiobase+0x004c: 0x00000000 (RESERVED)
gpiobase+0x0050: 0x00000000 (RESERVED)
gpiobase+0x0054: 0x00000000 (RESERVED)
gpiobase+0x0058: 0x00000000 (RESERVED)
gpiobase+0x005c: 0x00000000 (RESERVED)
gpiobase+0x0060: 0x00000000 (GP_RST_SEL1)
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT
gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF
gpiobase+0x0064: 0x00000000 (GP_RST_SEL2)
gpiobase+0x0068: 0x00000000 (GP_RST_SEL3)
gpiobase+0x006c: 0x00000000 (RESERVED)
gpiobase+0x0070: 0x00000000 (RESERVED)
gpiobase+0x0074: 0x00000000 (RESERVED)
gpiobase+0x0078: 0x00000000 (RESERVED)
gpiobase+0x007c: 0x00000000 (RESERVED)

Change-Id: Ic77474c4bc0871e95103ddecd9f6a9406c8f016d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/3000
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01 22:39:04 +02:00
Nico Huber 5ed986b8ab inteltool: Support PM registers on Cougar/Panther Point
This adds the power management register definitions for Intel's Cougar
Point and Panther Point platform controller hubs (PCH). The definitions
are actually a subset of the older ICH10R registers: I've added just
those that are mentioned in the public specifications in [1] and [2].
I've tested dumping with an H77 PCH.

NM70 is missing in [1]. Therefore, I didn't add it here.

[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
    Document-Number: 324645-006

[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
    Datasheet
    Document-Number: 326776-003

Change-Id: Ia6945fe96cd96b568ed5191e91dbba5556e1ee95
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01 21:00:16 +02:00
Nico Huber 14290b3cbb inteltool: Add Cougar/Panther Point IDs to rootcmplx.c
This adds the PCI IDs of Intel's Cougar Point and Panther Point platform
controller hubs (PCH) to the dumping of the root complex configuration
under the root complex base address (RCBA). Those PCHs are handled exactly
as the older ICHs which can be seen in [1] and [2]. I've tested dumping
with an H77 PCH.

NM70 is missing in [1]. Therefore, I didn't add it here.

[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
    Document-Number: 324645-006

[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
    Datasheet
    Document-Number: 326776-003

Change-Id: I2296caae57e614171300362d41715deecec77762
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2986
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-30 18:17:08 +01:00
Paul Menzel be2c6340b3 superiotool: Allow to override Makefile variables `CC`, `INSTALL` and `PREFIX`
This way for example a different compiler can easily be used.

    CC=clang make

Change-Id: I50b83554fd4826d00d87e60a30eb1f6a88834397
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2935
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29 21:32:48 +01:00
Nico Huber 6983a6829a inteltool: Support GPIO registers on Cougar/Panther Point
This adds the GPIO register definitions for Intel's Cougar Point and
Panther Point platform controller hubs (PCH). All information is taken
from the public specifications in [1] and [2]. I've tested it with an
H77 PCH.

NM70 is missing in [1]. Therefore, I didn't add it here.

[1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet
    Document-Number: 324645-006

[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) -
    Datasheet
    Document-Number: 326776-003

Change-Id: I31711e24f852e68b3c113e3bd9243dc7e89ac197
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2961
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29 21:07:55 +01:00
Nico Huber 76d60494ef inteltool: Add definitions for Cougar/Panther Point PCI IDs
This adds correspondings #defines for the PCI IDs of the LPC device on
Intel's Cougar Point and Panther Point platform controller hubs. Those
will be used more in later commits.

I've checked all those IDs against the specification updates [1] and [2].

[1] Intel 6 Series Chipset and Intel C200 Series Chipset Specification
    Update
    Document-Number: 324646-019

[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH)
    Family - Datasheet Specification Update
    Document-Number: 326777-010

Change-Id: Ibef5a30d283c568c345eb8d8149723e7a3049272
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2960
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29 21:07:30 +01:00
Nico Huber 69a21b1eb9 crossgcc: Fix building with texinfo-5.x
If you have a recent version of texinfo installed, building the reference
toolchain fails with the following error:
(in util/crossgcc/build-gcc/crossgcc-build.log)

[...]/gcc-4.7.2/gcc/doc/cppopts.texi:806: @itemx must follow @item

Looks like a warning-became-an-error problem in texinfo, to me. Fix that by
making every erroneous @itemx an @item.

Change-Id: I685ae1ecfee889b7c857b148cfab7411a10e7ecd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2939
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2013-03-28 21:14:50 +01:00
Aaron Durbin 6b0d0d6e14 cbfstool: Add update-fit command
Add support for filling in the Firmware Interface Table.
For now it only supports adding microcode entries.

It takes 2 options:
1. Name of file in cbfs where the mircocode is located
2. The number of empty entries in the table.

Verified with go firmware tools. Also commented out updating
microcode in the bootblock. When romstage runs, the CPUs indicate
their microcode is already loaded.

Change-Id: Iaccaa9c226ee24868a5f4c0ba79729015d15bbef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2712
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
2013-03-27 01:25:12 +01:00
Stefan Reinauer dc7bc8e589 cbfstool: Fix cbfs_image.c
- The read-only structures are const now
- cosmetic fixes
  - put { on a new line for functions
  - move code after structures

Change-Id: Ib9131b80242b91bd5105feaebdf8306a844da1cc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2922
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
2013-03-27 01:24:48 +01:00
Aaron Durbin 73982c3c68 xcompile: honor LINKER_SUFFIX variable
In commit e820e5cb3a titled
"Make xcompile support multiple architectures" the LINKER_SUFFIX
variable was introduced to bypass gold if the bfd linker was
available. However, the LINKER_SUFFIX wasn't honored when
the compiler evironment variables were set. Fix the original
intention.

Change-Id: I608f1e0cc3d0bea3ba1e51b167d88c66d266bceb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-23 19:32:44 +01:00
Hung-Te Lin b02c873190 cbfstool: Fix initial empty space in image creation.
When calculating initial CBFS empty entry space, the size of header itself must
be not included (with the reserved space for entry name). This is a regression
of the old cbfstool size bug.

Before this fix, in build process we see:
 OBJCOPY    cbfs/fallback/romstage_null.bin
 W: CBFS image was created with old cbfstool with size bug.
    Fixing size in last entry...

And checking the output binary:
 cbfstool build/coreboot.pre1 print -v -v
 DEBUG: read_cbfs_image: build/coreboot.pre1 (262144 bytes)
 DEBUG: x86sig: 0xfffffd30, offset: 0x3fd30
 W: CBFS image was created with old cbfstool with size bug.
    Fixing size in last entry...
 DEBUG: Last entry has been changed from 0x3fd40 to 0x3fd00.
 coreboot.pre1: 256 kB, bootblksz 688, romsize 262144, offset 0x0 align: 64
 Name                           Offset     Type         Size
 (empty)                        0x0        null         261296
 DEBUG:  cbfs_file=0x0, offset=0x28, content_address=0x28+0x3fcb0

After this fix, no more alerts in build process.
Verified to build successfully on x86/qemu and arm/snow configurations.

Change-Id: I35c96f4c10a41bae671148a0e08988fa3bf6b7d3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22 00:21:41 +01:00
Hung-Te Lin e4ea2ca18d cbfstool locate: Implement alignment switch --align/-a
cbfstool usage change:
 "-a" for "cbfstool locate" can specify base address alignment.

To support putting a blob in aligned location (ex, microcode needs to be aligned
in 0x10), alignment (-a) is implemented into "locate" command.

Verified by manually testing a file (324 bytes) with alignment=0x10:
 cbfstool coreboot.rom locate -f test -n test -a 0x10
 # output: 0x71fdd0
 cbfstool coreboot.rom add -f test -n test -t raw -b 0x71fdd0
 cbfstool coreboot.rom print -v -v
 # output: test                           0x71fd80   raw          324
 # output:  cbfs_file=0x71fd80, offset=0x50, content_address=0x71fdd0+0x144

Also verified to be compatible with old behavior by building i386/axus/tc320
(with page limitation 0x40000):
 cbfstool coreboot.rom locate -f romstage_null.bin -n romstage -P 0x40000
 # output: 0x44
 cbfstool coreboot.rom locate -f x.bin -n romstage -P 0x40000 -a 0x30
 # output: 0x60

Change-Id: I78b549fe6097ce5cb6162b09f064853827069637
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2824
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
2013-03-20 05:47:32 +01:00
Hung-Te Lin e91983767c cbfstool locate: Rename -a align switch to -P for page size
cbfstool usage change:
   The "-a" parameter for "cbfstool locate" is switched to "-P/--page-size".

The "locate" command was used to find a place to store ELF stage image in one
memory page. Its argument "-a (alignment)" was actually specifying the page size
instead of doing memory address alignment. This can be confusing when people are
trying to put a blob in aligned location (ex, microcode needs to be aligned in
0x10), and see this:
  cbfstool coreboot.rom locate -f test.bin -n test -a 0x40000
  # output: 0x44, which does not look like aligned to 0x40000.

To prevent confusion, it's now switched to "-P/--page-size".

Verified by building i386/axus/tc320 (with page limitation 0x40000):
 cbfstool coreboot.rom locate -f romstage_null.bin -n romstage -P 0x40000
 # output: 0x44

Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Change-Id: I0893adde51ebf46da1c34913f9c35507ed8ff731
Reviewed-on: http://review.coreboot.org/2730
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
2013-03-19 11:12:10 +01:00
Андрей Павлов ab9b71d54c superiotool: Add support for the IT8728F Super I/O
$ superiotool -d
superiotool r4.0-3712-gd549279
Found ITE IT8728F (id=0x8728, rev=0x1) at 0x2e
Register dump:
idx 02 07 20 21 22 23 24 2b  2e 2f
val 00 0a 87 28 01 00 00 40  00 00
def NA NA 87 28 01 00 00 MM  00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1
val 00 03 f0 06 02 00 00
def 00 03 f0 06 02 00 00
LDN 0x01 (COM1)
idx 30 60 61 70 f0 f1
val 01 03 f8 04 00 50
def 00 03 f8 04 00 50
LDN 0x02 (COM2)
idx 30 60 61 70 f0 f1
val 00 02 f8 03 00 50
def 00 02 f8 03 00 50
LDN 0x03 (Parallel port)
idx 30 60 61 62 63 70 74 f0
val 01 03 78 00 00 07 04 08
def 00 03 78 07 78 07 03 03
LDN 0x04 (Environment controller)
idx 30 60 61 62 63 70 f0 f1  f2 f3 f4 f5 f6 f9 fa fb
val 01 0a 30 0a 20 09 00 80  00 00 20 00 f0 48 00 00
def 00 02 90 02 30 09 00 00  00 00 00 MM MM MM MM MM
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 71 f0
val 01 00 60 00 64 01 02 08
def 01 00 60 00 64 01 02 48
LDN 0x06 (Mouse)
idx 30 70 71 f0
val 01 0c 02 00
def 00 0c 02 00
LDN 0x07 (GPIO)
idx 25 26 27 28 29 2a 2c 2d  60 61 62 63 64 65 70 71  72 73 74 b0 b1 b2 b3 b4  b8 b9 ba bb bc bd c0 c1  c2 c3 c4 c8 c9 ca cb cc  cd ce cf e0 e1 e2 e3 e4  e9 f0 f1 f2 f3 f4 f5 f6  f7 f8 f9 fa fb
val 00 f3 10 00 00 00 80 00  00 00 0a 00 00 00 00 00  20 00 00 00 00 00 00 00  20 00 00 00 00 00 01 00  00 40 00 01 00 00 00 00  00 00 00 00 00 00 00 00  21 10 42 00 00 00 00 1c  00 00 00 00 00
def 00 f3 00 00 00 00 03 00  00 00 00 00 00 00 00 00  20 38 00 00 00 00 00 00  20 00 00 00 00 00 01 00  00 40 00 01 00 00 40 00  00 00 00 00 00 00 00 00  MM 00 00 00 00 00 00 00  00 00 00 00 00
LDN 0x0a (Consumer IR)
idx 30 60 61 70 f0
val 00 03 10 0b 06
def 00 03 10 0b 06

Change-Id: Ifb45d28005d78b2a99d8552b59154d11bdf44f6f
Signed-off-by: Андрей Павлов <7134956@gmail.com>
Reviewed-on: http://review.coreboot.org/2775
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-17 23:20:38 +01:00
Ronald G. Minnich c2c97231e3 Show the device tree.
This is a bit of a hack but it's very handy. It compiles in your static.c
and then shows what coreboot would see when it is run. It uses your static.c
and functions pulled from src/device/device_util.c.
I've already used it to debug problems with the snow device tree.

I'm waiting someone to tell me this is already written :-)

Change-Id: Ia8c8a5d08d8757bec49eaf70473efa701bc56581
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2767
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-16 04:30:16 +01:00
Paul Menzel a46a712610 GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.

The following command was used to convert all files.

    $ git grep -l 'MA  02' | xargs sed -i 's/MA  02/MA 02/'

[1] http://www.gnu.org/licenses/gpl-2.0.txt

Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-01 10:16:08 +01:00
Patrick Georgi 12781422d5 nvramtool: reduce memory mapping
Instead of trying to map the first megabyte, only map what is
required to read the tables.

Change-Id: I9139dbc8fd1dd768bef7ab85c27cd4c18e2931b3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2485
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-22 16:04:03 +01:00
Patrick Georgi 11a7db3b57 romcc: Don't fail on function prototypes
Instead, ignore them. One is as non-standard as the other
and ignoring is more convenient since we don't need to
guard prototypes with #ifndef __ROMCC_ all the time.

Change-Id: I7be93a2ed0966ba1a86f0294132a204e6c8bf24f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2424
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19 11:01:05 +01:00
Hung-Te Lin 7b654a9702 cbfstool: Fix compile warnings caused by incorrect data types.
The "offset" in cbfs-mkpayload should be printed as type %lu
instead of %d as `gcc` rightfully warns about.

    gcc -g -Wall -D_7ZIP_ST -c -o /srv/filme/src/coreboot/util/cbfstool/cbfs-mkpayload.o cbfs-mkpayload.c
    cbfs-mkpayload.c: In function ‘parse_fv_to_payload’:
    cbfs-mkpayload.c:284:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
    cbfs-mkpayload.c:296:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat]

This warning was introduced in the following commit.

    commit 4610247ef1
    Author: Patrick Georgi <patrick@georgi-clan.de>
    Date:   Sat Feb 9 13:26:19 2013 +0100

        cbfstool: Handle alignment in UEFI payloads

        Reviewed-on: http://review.coreboot.org/2334

Change-Id: I50c26a314723d45fcc6ff9ae2f08266cb7969a12
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2440
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
2013-02-18 12:28:43 +01:00
Paul Menzel 475d42a16c cbfstool: Add `-Werror` to make all warnings into errors
Ensure that no changes with warnings are committed. Although using
`-Werror` is debatable [1][2].

[1] http://blog.flameeyes.eu/2009/02/future-proof-your-code-dont-use-werror
[2] http://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html

Change-Id: I402f2d82dd4087d8a575b0a85305a02ef04bb537
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2441
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-18 12:10:44 +01:00
Stefan Reinauer 0aa37c488b sconfig: rename lapic_cluster -> cpu_cluster
The name lapic_cluster is a bit misleading, since the construct is not local
APIC specific by concept. As implementations and hardware change, be more
generic about our naming. This will allow us to support non-x86 systems without
adding new keywords.

Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2377
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14 07:07:20 +01:00
Stefan Reinauer 4aff4458f5 sconfig: rename pci_domain -> domain
The name pci_domain was a bit misleading, since the construct is only
PCI specific in a particular (northbridge/cpu) implementation, but not
by concept. As implementations and hardware change, be more generic
about our naming. This will allow us to support non-PCI systems without
adding new keywords.

Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2376
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14 02:00:10 +01:00
Hung-Te Lin ebae438bf2 crossgcc: Support hosts using non-GNU make as default make.
On hosts using non-GNU make as default make program (ex, FreeBSD's default is
BSD make and having GNU make as "gmake"), building acpica will fail. We should
use the correct path of make $(MAKE).

Verified to build on FreeBSD 9.0 with gcc 4.7 from ports. Note, the shipped gcc
in FreeBSD 9.0 is 4.2.1 and needs more patches to remove -Wbad-function-case and
-Wempty-body. That should be fixed in a future patch.

Change-Id: Iacbf5a05e84a8a53d9d3e783a10131de603282c9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-11 14:34:17 +01:00
Patrick Georgi 4610247ef1 cbfstool: Handle alignment in UEFI payloads
Tiano for X64 is much cleaner to start up when using higher alignments in
firmware volumes. These are implemented using padding files and sections
that cbfstool knew nothing about. Skip these.

Change-Id: Ibc433070ae6f822d00af2f187018ed8b358e2018
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2334
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-09 20:58:22 +01:00
Hung-Te Lin 408aefd176 cbfstool: Fix crash on image without bootblock in end of ROM.
On platforms with CBFS data filling end of ROM image without bootblock in the
end (ex, ARM), calculation of "next valid entry" may exceed ROM image buffer in
memory and raise segmentation fault when we try to compare its magic value.

To fix this, always check if the entry address is inside ROM image buffer.

Verified to build and boot successfully on qemu/x86 and armv7/snow.

Change-Id: I117d6767a5403be636eea2b23be1dcf2e1c88839
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2330
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-09 06:30:10 +01:00
Zheng Bao 30b895f7e2 crossgcc: Save the script itself when cross build is over.
In case that the new toolchains don't work well, we can trace back
and reproduce the old tools by checking the xgcc folder. It is useful
when my team members need to get my old toolchains on their own host
machines.

Change-Id: I54e4bc6afcfbbf622165af6eae27bbb6efc2e8cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2247
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-06 19:25:43 +01:00
Hung-Te Lin c5ff6487e6 armv7: Prevent CBFS data overlapping bootblock.
For arm/snow, current bootblock is larger than previously assigned CBFS offset
and will fail to boot. To prevent this happening again in future, cbfstool now
checks if CBFS will overlap bootblock.

A sample error message:
	E: Bootblock (0x0+0x71d4) overlap CBFS data (0x5000)
	E: Failed to create build/coreboot.pre1.tmp.

arm/snow offset is also enlarged and moved to Kconfig variable.

Change-Id: I4556aef27ff716556040312ae8ccb78078abc82d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2295
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-06 10:53:19 +01:00
Stefan Reinauer e87641840f cbfstool: Add support for 64bit UEFI
Right now cbfstool only accepts firmware volumes with
a x86 SEC core and refuses an x86-64 SEC core because
some magic values and the extended PE header are
different. With this patch, both IA32/x64 images are
supported. (No check is done whether the mainboard
actually supports 64bit CPUs, so careful!)

This needs another patch to Tiano Core that switches
to long mode after jumping to the 64bit entry point.
Right now that code assumes we're already in 64bit code
and the machine crashes.

Change-Id: I1e55f1ce1a31682f182f58a9c791ad69b2a1c536
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2283
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-06 00:37:26 +01:00
Stefan Reinauer 543a682458 cbfstool: support parsing UEFI firmware volumes
This removes the hack implemented in http://review.coreboot.org/#/c/2280
(and should make using 64bit Tiano easier, but that's not yet supported)

Change-Id: Ie30129c4102dfbd41584177f39057b31f5a937fd
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-05 22:43:23 +01:00