Update DPTF parameters from internal thermal team.
BUG=b:244373677
BRANCH=firmware-dedede-13606.B
TEST=Build image and verified by thermal team.
Change-Id: I8415e0d25a79764f0c1d11688728b7caa3b3d6a4
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
We currently have two competing mechanisms to limit the placement of
resources:
1. the explicit `.limit` field of a resource, and
2. the IORESOURCE_ABOVE_4G flag.
This makes the resource allocator unnecessarily complex. Ideally, we
would always reduce the `.limit` field if we want to "pin" a specific
resource below 4G. However, as that's not done across the tree yet,
we will use the _absence_ of the IORESOURCE_ABOVE_4G flag as a hint
to implicitly lower the `limit` of a resource. In this patch, this
is done inside the effective_limit() function that hides the flag
from the rest of the allocator.
To automatically place resources above 4G if their limit allows it,
we have to allocate from top down. Hence, we disable the prompt for
RESOURCE_ALLOCATION_TOP_DOWN if resources above 4G are requested.
One implication of the changes is that we act differently when a
cold-plugged device reports a prefetchable resource with 32-bit
limit. Before this change, we would fail to allocate the resource.
After this change, it forces everything on the same root port below
the 4G line.
A possible solution to get completely rid of the IORESOURCE_ABOVE_4G
flag would be rules to place resources of certain devices below 4G.
For instance, the primary VGA device and storage and HID devices
could be made available to a payload that can only address 32 bits.
For now, effective_limit() provides us enough abstraction as if the
`limit` would be the only variable to consider. With this, we get
rid of all the special handling of above 4G resources during phase 2
of the allocator. Which saves us about 20% of the code :D
Change-Id: I4c7fcd1f5146f6cc287bd3aa5582da55bc5d6955
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65413
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `IORESOURCE_ABOVE_4G` flag was only explicitly set for our dummy
device that reserves resources behind a hotplug port. The current re-
source allocator implicitly extends this to all devices below the port,
including real ones. Let's make that explicit, so future changes to the
allocator can't break this rule.
Change-Id: Id4c90b60682cf5c8949cde25362d286625b3e953
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66719
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add option to resource allocator v4 that restores the top-down
allocation approach at the domain level.
This makes it easier to handle 64-bit resources natively. With
the top-down approach, resources that can be placed either above
or below 4G would be placed above, to save precious space below
the 4G boundary.
Change-Id: Iaf463d3e6b37d52e46761d8e210034fded58a8a4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
There's no reason to use camel case for EEPROM region names or local
variables. Use snake case for consistency with coreboot's code style.
Change-Id: Id1200a0c778095b109d824a1ca4e3e69591e4165
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Some devices require that several bytes are written with a single I2C
write command. Extend the i2c_bus interface functions and add both, read
and write for more than one byte at a defined byte offset.
Change-Id: I0eec2e1d4185170f02b4ab35aa6546dc69569303
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67098
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
For TPM2, vb2api_secdata_firmware_create() is already called from
setup_firmware_space() from _factory_initialize_tpm(). Therefore move
the duplicate call from factory_initialize_tpm() to TPM1's
_factory_initialize_tpm().
Change-Id: I892df65c847e1aeeabef8a7578bec743b639a127
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The lint script just did very basic argument parsing and required the
sub-command and --junit argument to be in specific locations. I'm
adding additional commands, so the first step is to add true command
line parsing.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7118c29e6c5d785b35a7ae12cf5984c43ebc3ab9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67191
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel platforms have soft straps stored in the SI_DESC FMAP section
which can alter boot behavior and may open up a security risk if they
can be modified by an attacker. This patch adds the SI_DESC region to
the list of ranges covered by GSC verification (CONFIG_VBOOT_GSCVD).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0f1b297e207d3c6152bf99ec5a5b0983f01b2d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66346
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new
hwcrypto_allowed argument, to potentially let them try to call the
vb2ex_hwcrypto API for hash calculation. This change will open hardware
crypto acceleration up to all hash calculations in coreboot (most
notably CBFS verification). As part of this change, the
vb2_digest_buffer() function has been removed, so replace existing
instances in coreboot with the newer vb2_hash_calculate() API.
Due to the circular dependency of these changes with vboot, this patch
also needs to update the vboot submodule:
Updating from commit id 18cb85b5:
2load_kernel.c: Expose load kernel as vb2_api
to commit id b827ddb9:
tests: Ensure auxfw sync runs after EC sync
This brings in 15 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
flashrom uses cmocka for unit testing. Install it so that the CI can
use it.
Change-Id: I5c168e480d6f4cbfbbd175ecb035c88bfcbac00b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67272
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add additional DPTC parameter IDs that are necessary when throttling the
SOC due to low/no battery.
These additional parameters are used in later CLs.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Build nipperkin
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I9e944d7c620414ec92d08a3d1173ba281d593ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67182
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
elog_gsmi_cb_mainboard_log_wake_source is called from SMI and causes
eSPI transactions. If the SMI interrupts an ongoing eSPI transaction
from the OS it will conflict and cause failures. Removing this call to
avoid conflicts. This can be re-enabled after refactoring
google_chromeec_get_mask to use ACPI MMIO.
This is a copy of CB:63280 but for skyrim.
BUG=b:227163985, b:243557044
TEST=suspend/resume skyrim and no longer see EC wake sources in elog.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iac56840fe15101bc556d8cce9960f761c6ea7181
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Enable DSP setting. Make sure the SSP can work as expected.
BUG=b:243123156
TEST=Dev beep working on Rex.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I6ae28e414ac4ac33f596df57691c979eac5fe132
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67270
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Enabling Bus Master isn't required by the hardware, so we shouldn't
need to enable it at all. However, some payloads do not set this bit
before attempting DMA transfers, which results in functionality
failure. For example: in this case, unable to see the developer screen
in Depthcharge.
In the prior IA SoC platform, FSP/GFX PEIM does the BM enabling for
the IGD BAR resources but starting with the MTL platform, it fails
to do so resulting into inability to see the Pre-OS display.
BUG=b:243919230 ([Rex] Unable to see Pre-OS display although GFX
PEIM Display Init is successful during AP boot)
TEST=Able to see the developer screen with eDP/HDMI while booting
the Google/Rex.
Also, this change doesn't impact the previous platforms
(ADL, TGL, CML etc.) where the BM is default enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9ad9eee8379b7ea1e50224e3fabb347e5f14c25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Move devicetree.md from acpi/ to getting_started/. The devicetree has
nothing to do with ACPI and getting_started has the most similar
information about coreboot.
Change-Id: I873b293f036a9e3bcdc98135386f9158c645513c
Signed-off-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Select SYSTEM_TYPE_LAPTOP so the FADT PM profile is correctly set to
mobile (vs the default of desktop).
TEST=build/boot google/dewatt, run FWTS and verify FADT PM profile correct
Change-Id: I480fbe85782e2c63efa8d2212d503a47d8149ab9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
As part of investigating b/240690391 I noticed that we were missing
the daughter board ports. Not all SKUs have these ports connected,
but it doesn't hurt to have the extra ACPI nodes.
BUG=none
TEST=build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id6fc34acbfa30bc15e697043bf93bcf584256128
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Definition of FIRMWARE_LOCATION, POUND_SIGN, DEP_FILES,
amd_microcode_bins are moved to common Makefile.inc.
Change-Id: I5a0ea27002e09d0b879bafad37a5d418ddb4e644
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62658
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
A new ChromeOS automated test will be introduced to check the cbmem log
of diagnostic boot mode. Because the diagnostic boot does not allow
booting into kernel, the test must perform AP reset and then check the
cbmem log afterwards. However, the memory content might not be written
back to memory (from CPU cache) during AP reset because of the cache
snooping mechanism on x86. Hence, some API to flush cache is needed.
Implement dcache_* to allow flushing cache proactively in x86. To avoid
unnecessary flush, check dma_coherent before calling dcache_* functions,
which will be always true in x86. Therefore, this change won't affect
the original functionality.
BUG=b:190026346
TEST=FW_NAME=primus emerge-brya libpayload
Cq-Depend: chromium:3841252
Signed-off-by: Hsin-Te Yuan <yuanhsinte@google.com>
Change-Id: I622d8b1cc652cbe477954a900885d12e6494d94d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add the headers for 2.2.3.1, which includes the following changes
over 2.2.0.0:
• [Implemented]GLK: XHCLKGTEN Register setting causes S0ix entry
failure in less than 5 cycles when a USB2 Ethernet Dongle is
connected. Refer GLK BIOS Spec Volume1 CDI# 571118 under chapter
7.20.6 for new Register settings.
• [Implemented] [GLK/GLK-R] DDR4 16Gb SDP Memory support for Gemini
Lake/Gemini Lake – R
• [Update] MRC new version update to 1.38.
• [Fixed][GLK-R][WLAN] Removed the DSW function - Wake on LAN from
S4 issue with latest Wifi driver.
[Update] MRC new version update to 1.39. Included fix for
MinRefRate2xEnable and support for Rowhammer mitigation.
• [Fixed] Disable Dynamic DiffAmp and set CTLE from 7 to 5. This
change specific to DDR4 memory configuration.
• GLK Klocwork Fix
• [Update] MRC new version update to 1.40.
Added in a separate directory as the default. The 2.2.0.0 headers
were left and will be used for Google boards, as some offsets have
moved.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I09498368b116c2add816eeada2fa4d0dba6e5765
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Whilst UefiPayloadPkg is always built with support for 32-bit
and 64-bit, this is not the case for all edk2 targets. Move this
to the build command so they can be specified on each target.
Also add the `-s` switch, which stands for quiet to suppress edk2
printing War and Peace whilst building.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If94abd4e28917718c76ad5945966e7be668c8f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66364
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename the update recipe, which updates the edk2 repository, to
$(EDK2_PATH). There is no functional change here.
This recipe must be phony so it runs every time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I30fedbee7459b79a85a23678e0075368eda95da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66363
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When cloning edk2, download the submodules at the same time. There is
no functional change here, just a minor speed improvement.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieeb481346093588bd8d237857966001dc81460b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66362
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
First, remove the `-p` flag; as it's a file target it's not needed in
this case.
Second, remove the clone as this is handled in the update recipe.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3829a3151be2d05a067a160fa770e5eb7ad4aad4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66361
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert UefiPayloadPkg (UEFIPAYLOAD.fd) to a file target.
There is no functional change here, it just avoids it being copied
out of the build dir, into an output directory and then into build.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iff097f6f1e715c697c33c50c395d7c1b88cc6280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66360
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nvidia recommends saving and restoring the LTR Enable bit in PCIe config
space for the PCIe root port before/after GC6 entry. Also the detectable
error bit should be cleared, as there may be errors expected during the
GC6 flow.
BUG=b:214581763
TEST=no more correctable errors after GC6 entry/exit
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I058ce1b3f17fb6cc59785a85efaf9ea0504cf2ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
BUG=b:238937091
TEST=Dump SSDT on nereid and check that the wifi device contains the
DmaProperty. Also check that the kernel marks the device as untrusted.
Change-Id: I0725ea18d52420a3161d6fcfa3bcb72ebe35f3a5
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES and remove the
TODO from SOC_AMD_COMMON_BLOCK_HAS_ESPI.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90e3bf3f196e22b428b01ea0437c1224702d2b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Compile-time support of DPTC is controlled by
EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes
EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value
SOC_AMD_COMMON_BLOCK_ACPI_DPTC.
Each variant's run-time support of DPTC continues to be controlled by
the variant's overridetree.cb "dptc_enable" value.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1.
References:
RaptorLake External Design Specification Volume 1 (640555)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Chausie fails to boot without this option set. Enable in the mainboard
rather than the SoC Kconfig to not impact Skyrim.
TEST=boot to OS
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9f2a1be9eddb9e17407d00ff50ceb70a2718ce3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs
its own firmware to enable SPM suspend/resume function which turns off
several resources such as DRAM/mainpll/26M clk when linux system
suspend.
SPM is an essential component on MediaTek SoC, so we initialize PPM
in soc_init(). For MT8188, SPM will handshake with DPM to do
initialization, so we need to call spm_init() after dpm_init().
This SPM flow adds 33ms to the boot time.
firmware log:
mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs
SPM: spm_init done in 33 msecs, spm pc = 0x400
TEST=spm pc is 0x400 which is in idle state.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and
MT8188, so we move them to common/spm.c.
TEST=build pass.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The unit of current_clk in pmif_ulposc_check() should be MHz. We use
pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz.
Without this modification, the judgement in pmif_ulposc_check() is
alway wrong due to the wrong unit.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add basic DEVAPC (device access permission control) driver.
DEVAPC driver is used to set up bus fabric security and data protection
among hardwares. DEVAPC driver groups the master hardwares into
different domains and gives secure and non-secure property. The slave
hardware can configure different access permissions for different
domains via DEVAPC driver.
1. Initialize DEVAPC.
2. Set master domain and secure side band.
3. Set default permission.
TEST=check logs of DEVAPC ok.
BUG=b:236331724
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some enums and functions are the same in DEVAPC driver for MT8195,
MT8186, and MT8188, so we move them to common folder.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DPM is a hardware module for DRAM power management, which is used for
DRAM low power mode.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common
folder.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
It seems pass 1 and 2 were inconsistent. The first would account for
resources with a limit of 0 even though the second can't assign anything
for them.
Change-Id: I86fb8edc8d4b3c9310517e07f29f73a6b859a7c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65402
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fix EC_IN_RW config for Rex. Dauntless on Rex does not have an EC_IN_RW GPIO pin.
Port of commit 7f339c6050 ("mb/google/corsola: Correct EC-is-trusted logic")
BUG=b:243950850
TEST=Built and booted to Google Rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I97e5c752b4f36c9221137903f755837880f6b1c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67208
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Jack Rosenthal