When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:251055188
TEST=On yaviks eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Change-Id: I6b3a20f3c14d5e9aa8d71f6ca436b5a682310797
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68365
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 7805999e6:
2022-09-05 16:42:34 +0200 - (Merge changes from topic "st-nand-updates" into integration)
to commit id c45d2febb:
2022-10-12 15:56:24 +0200 - (Merge "fix(ufs): retry commands on unit attention" into integration)
This brings in 288 new commits.
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I4137cab0a1a352e94e21f105717ae0b6c515b75b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68386
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
1.Change the TPM I2C freqeuncy to 1 MHz for xivu.
2.Config same settings as the baseboard for I2C buses 1-5.
BUG=b:249953477
TEST=On xivu, all timing requirements in the spec are met.
Frequencies:
1. I2C0 (TPM): 974.3 Khz
2. I2C1 (TouchScreen); 375.5 Khz
3. I2C3 （Audio): 389.0 Khz
4. I2C5 (Touchpad): 388.5 Khz
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I33f712c14978b95f3a4da82d6f1f5fbae1283b17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements voltage function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor voltage value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I77712b72fa47bdcb56ffddeff15cff9f3b3bbe86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68023
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current SMBIOS for coreboot is missing processor info for Alder Lake
and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements max speed function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS max speed value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I09bcccc6f97238f7328224af8b852751114896fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67913
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCIe port descriptor list seems to be specific to Merlin Falcon and
Prairie Falcon has a different PCIe root port configuration. Since I
neither have the board nor the different APUs, I just add a comment
about this instead of trying to come up with a PCIe port descriptor list
that may or may not work properly on Prairie Falcon APUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e1eb67a8f684297bbefc6e2593250d7bd45593f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The northbridge ops should be added to the actual northbridge and not
the first HT device. Neither of the devices has BARs on it, so
read_resources implementation will still work correctly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e5f21bfe5fff043d7d9afafa360764203dd61f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68409
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Stoneyridge is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime. In contrast to the other AMD
SoCs in the coreboot tree the PC driver used the PCI ID of the first HT
PCI device function, so add the ops to the device 0x18 function 0
devicetree entry in this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I500521701479aa271ebd61e22a1494c8bfaf87fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68408
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id668587e1b747c28207b213b985204b7a961a631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68410
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable the unused PCIe root ports that are disabled in the PCIe port
corresponding descriptor list passed to AGESA/binaryPI. This descriptor
list is in src/mainboard/google/kahlee/variants/baseboard/OemCustomize.c
and it only has B0D2F2 (gpp_bridge_1) and B0D2F4 (gpp_bridge_3) enabled.
Since the PCIe engines marked as unused in the port descriptor list
won't show up as PCI devices, don't enable those PCI devices in the
devicetree so that coreboot won't complain about static PCI devices not
being found on the PCI bus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8378e343a2eb13de66171cf4f38d77ae3401016
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68382
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The board's PCIe port descriptors have the PCIe engine disabled, so
update the devicetree accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic97a54c3cc762a36752d6b9f21467428912a9edd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68379
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since commit 60e9114c62 ("include/device: ensure valid link/bus is
passed to mp_cpu_bus_init"), no dummy LAPIC device is required under the
CPU cluster device. Since the CPU cluster device is already present in
the Stoneyridge chipset devicetree, drop the whole CPU cluster part from
the mainboard's devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8918c14be25ac9756926a9c6a2806a3dceced42a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68317
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add chipset devicetrees for Stoneyridge and Carrizo, which is also
supported by the Stoneyridge code, but has more external PCIe ports and
devices. The mainboard's devicetrees will be changed to use the aliases
defined in the chipset devicetree in follow-up patches. This is a
preparation to statically assign the ops for the internal devices
statically in the SoC devicetree instead of dynamically adding them in
ramstage.
BKDG #55072 Rev 3.04 was used to check the PCI devices and functions and
the MMIO addresses.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia45260b1168ed1d99993adfb98475da5b5c90d11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68316
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When using a Merlin Falcon APU, explicitly enable the PCIe root port at
B0D3F1. B0D3F0 is only a dummy PCI device function, but needs to also be
enabled in order for the actually used function to be usable. Prairie
Falcon doesn't have and PCI device 3 on bus 0, so remove D3F0 from the
common mainboard devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01f9b9ac2a9ebd5899a093d97eb5b2d76d309f66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68315
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the correct PCIe root ports in the devicetree so that the
configuration matches the PCIe port descriptors in
src/mainboard/amd/padmelon/bootblock/OemCustomize.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb00a65adcf2059d7432a8df08654bb0ba965e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68314
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCI devices that aren't present in the devicetree will be treated as
enabled. Since the chipset devicetree that will be added in a follow-up
patch disables this device by default, explicitly enable the IOMMU
device on the Stoneyridge mainboards that don't disable it to keep the
same behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a2cdd00abe8309244829dc633dd8a9ca0038dfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68313
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the devicetree files are passed to util/sconfig without being
processed by the C preprocessor, using #if in the devicetree won't give
the behavior that might be expected. Instead sconfig treats the #if as a
comment, but still processes all other lines. To get the intended
behavior, replace the C preprocessor usage in the devicetree by moving
the APU-specific parts to override devicetrees that get selected
according to the selected APU type.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iddd317b27a838849fa40c0fb77d942609104cf04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68312
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is no longer needed so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I82841c2114ceb5e7a46ce228fce63d24822098d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68084
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need for a PCI driver.
Change-Id: I4b499013a80f5c1bd6ac265a5ae8e635598d9e6c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a PCI driver.
Change-Id: I8e235d25622d0bd3f1bb3f18ec0400a02f674a6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a PCI driver.
Change-Id: Id25016703d1716930d9b6c6d1dab5481b10aca17
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Morgana is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67362ae4a32bc9b1dd19ee5e4caf42db8f5dd1bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68311
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Mendocino is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: I5619c8ad42cdeb019cb7294da884909df64a2211
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Cezanne is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: If535221335217cee53bca956747e7f17f0a5fd8d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: Ide747c9d386731af89b27630b200676c6e439910
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67743
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Change-Id: I2afc1855407910f1faa9bdd4e9416dd46474658e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows for reduced use of chip_operations in the followup patch and
allows the allocator to skip over the used mmio.
Change-Id: I4052438185e7861792733b96a1298201c73fc3ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Switch from gpio_configure_pads() to gpio_configure_pads_with_override()
so variants can override romstage GPIO defaults. Rename baseboard
function and add an weak empty override function to be used by variants.
Will be used for touchscreen power sequencing in a follow-on commit.
Change-Id: I45586237919cd07a171beac57f3510e26338f67f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Create the zombie variant of the herobrine reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:249180463
BRANCH=None
TEST=util/abuild/abuild -p none -t google/herobrine -x -a
make sure the build includes GOOGLE_ZOMBIE
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: Ifecf0a6323b20012defbf14bd16ce2f1f41f4714
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Wrap the console logging macros with do { ... } while (0) so they act
more like functions.
Add missing semicolons to calls of these macros.
TEST=compile only
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I721a4a93636201fa2394ec62cbe4e743cd3ad9d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The psp_verstage/svc.h SVC_CALLx macros are virtually
identical between picasso/cezanne/mendocino, so move
to common.
TEST=timeless builds are identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I86a8d9b043f68c01ee487f2cdbf7f61934b4a520
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C5.
BUG=b:249031186
BRANCH=brya
TEST=TP function is normal from EE check.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5e756b7d7e14cace24ef2dfbb323c840c867ae1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
HP Z220 series has PCI slot(s) but Interrupt Routing Table in ACPI
used to be missing, so one is added.
Note that the values within the added one are obtained from my own SFF
variant. If other variants have different values, please add them in a
manner similar to mb/gigabyte/ga-b75m-d3h/acpi/pci.asl.
Test result:
Log lines like
pci 0000:00:1e.0: can't derive routing for PCI INT A
ath9k 0000:04:00.0: PCI INT A: no GSI
disappeared from dmesg.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I8522b25ac46db2054302c8f2418927c722b157e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68334
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a missing period, use "SoC" with lowercase 'o' to refer to a "System
on a Chip", fix up the redundant "CRB board" expression (that stands for
"Customer Reference Board board"), switch the position of a verb and its
adverb ("never was" ---> "was never") to sound more natural, and replace
"depreciate" with "deprecate" for semantic correctness.
Change-Id: Ic821a9030d4ff32c76765f51f1feb0f5503d4cc0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68330
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Strings in C are highly cursed. Use `snprintf()` to minimize the
potential of running into undefined behavior in the future.
Change-Id: I3caef25bc7676ac84bb1c40efe6d16f50f8f4d26
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68323
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The `eeprom_read_serial()` function could return a non-NULL terminated
string if the serial in EEPROM has `HERMES_SN_PN_LENGTH` (32) non-NULL
characters. Make this impossible by adding an additional character for
a NULL byte in the static buffer, which always gets set to 0 (NULL).
Change-Id: I306fe1b6dd3836156afca786e352d2a7dca0d77c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68322
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This reverts commit 4b5ba94363.
Reason for revert: This optimization is causing the non-serial enabled
tot BIOS to not boot. To get tot back into good shape, will revert
for now and reevalute this fix and resubmit at a later time.
BUG=b:218406702
BRANCH=None
TEST=reboot from AP console (on herobrine) after flashing
image-herobrine.bin.
prior to fix the device would never boot to login prompt.
after rever the device would boot to login prompt again.
Change-Id: Iaac5f2fb2120f6aa41a0ce9a763d50fd7b9a3ec7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Eran Mitrani