Use the generic resource_consumer method which works for memory both
above and below 4G.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1bc553b18d08cee502b765166227810f8e619631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76181
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Due to TCPC0 & TCPC1 exchanged compare to Neried design,
but related USB2 Ports not exchanged, keep mainboard C port to conn0.
BUG=b:312998945
TEST=can boot from external Type-c USB disk
Change-Id: Ib8df4a256bd9cd1b2ca229b09d68f97babc8092e
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The device/device.h provides the definition for struct device used in
those files, so include this header file to make sure that it's not only
included indirectly via some other header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ff7cdbf0f53ada92adb53cf268e5feee9df4629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Updating from commit id 6788bb0:
2023-08-08 12:04:21 -0600 - (microcode-20230808 Release)
to commit id ece0d29:
2023-11-14 10:19:09 -0600 - (microcode-20231114 Release)
This brings in 1 new commits:
ece0d29 microcode-20231114 Release
Change-Id: I1d65318015803d5ca11dcf52e4011f49cf3129a1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Updating from commit id ba7fd22d:
2023-11-29 01:50:20 +0000 - (Makefile: Always link libdl)
to commit id db533497:
2023-12-05 20:09:44 +0000 - (host/lib/pkcs11: Remove superfluous 'nss' directory from include paths)
This brings in 4 new commits:
db533497 host/lib/pkcs11: Remove superfluous 'nss' directory from include paths
3307f1a7 tlcl: Add `TlclEvictControl()` support
0bd01137 tlcl: Remove the redundant bytes in TlclReadPublic
9afdf0f2 sign_official_build.sh: stop messing with +x
Change-Id: Ib2ded699605dfa4032f4687e1e336297c0af1372
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
CLKREQ programming as currently implemented is completely dependent on
FSP DXIO descriptors, so move under common/fsp/pci and rename the
Kconfig to reflect the move.
TEST=build google/{guybrush, skyrim, myst}
Change-Id: I87b53d092ddc367b134c25949f9da7670a6a1d88
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Integration for additional container images might be added to the
Makefile at some later point. However, in order to build and test new
images just add a simple script which fulfills that requirement until
then.
Change-Id: Ibd0a6d59f395e074c784452849650d7f03b4f1d8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Rename Dockerfile to Dockerfile.base since additional Dockerfiles basing
on this one will be added later.
Change-Id: I611feca234ae7600f9c17ae397f9f3903879c057
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
- First a console is set up for opensil.
- After that a region in CBMEM is reserved and passed to opensil which
will use it as a buffer for input/output information.
- Finally opensil is called and the return value handled.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4833a5a86034a13e6be102a6b68c3bb54108bc9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since the EHCI controllers in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the EHCI device operations to the
PCI devices during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92ecc3607216fb2f31639db9628898c9ce81770d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79171
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the XHCI controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the XHCI device operations to the
PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8685bec734415346a53330c9bd1aa82986995f1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79170
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the PCI bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the PCI bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9ca925a12e64c9a5b3bf295653bf032572ff29a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79169
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Since the SMBus controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the SMBus device operations to
the PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d3745ba5aefa30efbe705155d216aa7eadd26a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79168
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Function 0 of the device that has the bridges to other buses is a dummy
function that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on that device isn't
enabled. That dummy device function is however not a PCI host bridge, so
change the comment from 'Dummy Host Bridge' to 'Dummy device function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6069205bd2e1cb0f75025e9f330afc50462e742a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79397
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Add defaults for the CONSOLE_UART_BASE_ADDRESS Kconfig symbol so that
the SeaBIOS payload will know where the MMIO address of the UART is to
build successfully without any additional user input during the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia05c3531cdbf3fd3e2e5f81b9d652f9dfef2111a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79395
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
While acpidump_print shouldn't be called with a NULL pointer as
table_ptr argument, better add a check to not end up dereferencing the
NULL pointer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic3cc103c8a47fb8c2fe4262236ea47013af27c4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Since the LPC bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the LPC bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I366226be4aba75b98e45e4832bfe129fac14dbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Fix up the memory config for brox based on the schematics. Also,
since memory training needs to happen in romstage, initializing the
MEM_STRAP & MEM_CH_SEL gpios for use in romstage. Also consolidating
the GPIOs needing to be initialized in romstage into the baseboard
gpio.c file.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I17615cda7df10e73e49fb49f736728787ef7625d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Building the Lenovo T60/T60p, iasl 20230628 shows the remark below:
dsdt.asl 2099: PowerResource (FPwR, 0, 0)
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
dsdt.asl 2118: Name (_PR0, Package () { FPwR })
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
Address it by making it all upper case.
Change-Id: Ia7924b015e76c43818d2d82da35ce0013d721c26
Fixes: 3ab13a8691 ("ec/lenovo/h8/acpi/thermal: Add support for passive cooling")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79367
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update BND_NORTH_APB2_S's domain 5 permission to allow the access from
APU. The APU requires certain information saved in BND_NORTH_APB2_S for
voltage tuning. If this information cannot be retrieved, the APU may
operate at a high frequency with low voltage. Consequently, the APU may
not function as expected.
Change-Id: I967b138dc5517e54da7fbf94b9e502e478c991b5
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79348
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For ChromeOS platform the recovery reason is cleared in
vb2api_kernel_phase2 which is probably not called by any non-ChromeOS
system. It results in the platform being stuck in recovery mode, e.g.
when RW firmware verification fails. Even if the RW partition is
flashed with correctly signed image, the persistent non-zero recovery
reason will prevent vboot from attempting the RW partition check.
Use the newly exposed vb2api_clear_recovery and
VBOOT_CLEAR_RECOVERY_IN_RAMSTAGE Kconfig option to clear the recovery
reason and save it immediately to the VBNV. The idea is to let
non-ChromeOS coreboot platform to clear the recovery reason when
needed.
TEST=Clear the recovery reason in mainboard_final function right
before payload jump when RW partition is corrupted and RW partition is
valid. In case it is corrupted, the platform stays in recovery mode,
when valid the platform boots from RW partition. Tested on MSI PRO
Z690-A DDR4.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7ffaf3e8f61a28a68c9802c184961b1b9bf9d617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74343
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use existing macro instead of open coding magic numbers.
No functionality change.
Change-Id: If45f7f3f2b4226cedde6ff91b9848b9875f45f9f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79148
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch adds the power limit configuration for MCH ID index 3 aka
0x7d14 DID which is identical to MCH ID 0x7d01 (index 1).
TEST=Able to perform power limit configuration for google/ovis.
[DEBUG] WEAK: src/mainboard/google/rex/variants/baseboard/ovis/
ramstage.c/variant_devtree_update called
[INFO ] Overriding power limits PL1 (mW) (19000, 28000)
PL2 (mW) (64000, 64000) PL4 (W) (120)
Change-Id: Iff71adb4e26d18970b5947927c258419f751de32
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79332
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This patch removes the deprecated PL_PERFORMANCE and PL_BASELINE
configurations, relying instead on the refactored power limit flow.
This flow allows for seamless overrides by the baseboard and/or by
the variant board, if necessary.
Specifically, this patch:
- Removes PL_PERFORMANCE and PL_BASELINE configuration options from
mainboard.c in the google/rex directory.
- Relies on the baseboard_devtree_update() function, which is
implemented by the respective baseboard, to handle power limit
configuration.
- Leverages the variant_devtree_update() function, which is a
__weak implementation, to allow overrides by the variant directory.
This simplification improves code readability and maintainability while
maintaining the flexibility to handle power limit configurations as
needed.
Change-Id: I872e5cb59d7b2789ef517d4a090189785db46b85
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79331
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures that the LidStatus UPD is passed a dynamic value,
rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0
devices.
Problem statement:
* FSP-S GFX PEIM initializes the on-board display (eDP) even when the
LID is physically closed, because LidStatus is always set to 1.
* FSP-S skips external display initialization even when the LID is
closed.
Solution:
* FSP-S GFX PEIM module understands the presence of an external display
if LidStatus is not set, and tries to probe the other display
endpoint.
* Statically passing LidStatus as always enabled (aka 1) does not
illustrate the exact device scenarios, so this patch updates
LidStatus dynamically by reading the EC memory map offset.
BUG=b:313886118
TEST=Able to build and boot google/marasov to redirect the display
using external HDMI monitor while LID is closed.
Change-Id: Idb1d71bd54837630f36d43a45effc53d35f9cb70
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79352
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds code to generate Processor Properties
Topology Tables (PPTT) compliant to the ACPI 6.4 specification.
- The 'acpi_get_pptt_topology' hook is mandatory once ACPI_PPTT
is selected. Its purpose is to return a pointer to a topology tree,
which describes the relationship between CPUs and caches. The hook
can be provided by, for example, mainboard code.
Background: We are currently working on mainboard code for qemu-sbsa
and Neoverse N2. Both require a valid PPTT table. Patch was tested
against the qemu-sbsa board.
Change-Id: Ia119e1ba15756704668116bdbc655190ec94ff10
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch expands the power limit override capability to include
variants directories, enabling them to modify power limit settings
configured by the baseboard.
Previously, only the baseboard could override power limit settings.
For instance, while the google/rex baseboard sets the PL1 max power
limit to 15W, the google/screebo variant couldn't override this value.
This enhancement empowers variants directories to override baseboard-
configured power limit settings, allowing for greater flexibility and
control over power limits.
BUG=b:313667378
TEST=Able to call into _weak implementation of `variant_devtree_update`
unless there is one override.
[DEBUG] WEAK: src/mainboard/google/rex/variants/baseboard/rex/
ramstage.c/variant_devtree_update called
[INFO ] Overriding power limits PL1 (mW) (10000, 15000) PL2 (mW)
(40000, 40000) PL4 (W) (84)
Change-Id: Ib07691625e075b0fbab42271512322ffc60ba13b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Updating from commit id eb91266f01db (2023-11-29):
MDN: Update mendocino SMU to 90.43.0
to commit id 64cdd7c8ef19 (2023-12-01):
Cezanne/PSP: clean up release notes
This brings in 3 new commits:
64cdd7c8ef Cezanne/PSP: clean up release notes
54c45443b8 Stoneyridge: Drop PSP binaries for Bristol Ridge (BR)
bfa3c44c8c Stoneyridge: Tidy up the PSP binaries folder
Change-Id: Ifd2ca49a472c516c69c9f43ed4dc3faefd8729d8
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79365
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The Microsoft Debug Port Table 2 (DBG2) specification says that the
serial port subtype 0x00 should only be used for I/O-mapped 16550
compatible UARTs. The subtype 0x12 is a superset of that, and supports
specifying MMIO vs IO and the register access size via the generic
address structure. Rename the subtype 0x00 definition to
ACPI_DBG2_PORT_SERIAL_16550_IO_ONLY and add the subtype 0x12 definition
as new ACPI_DBG2_PORT_SERIAL_16550, so that the acpi_write_dbg2_uart
function will write the correct subtype for the generic 16550 UART.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I816bb22e6f76e661c8b8e39a2a4cb83b0085acb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79219
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Inteltool is GPLv2 licensed so all files that link to it should be GPLv2
by default. In addition, the contents of several of these headers were
originally moved directly from gpio_groups.c, which is explicitly marked
as GPL-2.0-only.
Change-Id: Ie897cb238c0c9e89fe677c999cbf1803f5f4609a
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Used by the OptiPlex 3020/7020/9020:
- EMI and Runtime registers work
- UART1 works (including IRQs)
- PS/2 keyboard and mouse untested
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I9323198f1139cd0c3dd37f977ae7693b721654f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Trim all GPIO comments like "origin ==> current".
BUG=b:304920262
TEST=pass building
Change-Id: I05daa4df16b6da3d3f971b75c7c467032e3f854d
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79321
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix GPP_D6 configuration for LTE power enable.
BUG=b:304920262
TEST=mmcli -m any
Change-Id: I2996fd35c2897269997bc0290e0ce93bbbaa1bf8
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79166
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com>
Due to TCPC0 & TCPC1 exchanged compare to Neried design,
but related USB2 Ports not exchanged.
BUG=b:304920262
TEST=Tpye-C & DP functions workable
Change-Id: I9dacf06b1e672575a684856acdb10b6c88360b18
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79165
Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
For proto PCB:
GPP_C0 for enable power supply which also for sensor subsystem.
GPP_C0 must allways turn power on, so GPP_C6 is not only used
for enable function but also for stop report.
BUG=b:304920262
TEST=1. touchscreen function workable
2. INT pin no active during suspend
Change-Id: I7dabf205dba616f57ef9717f950eba96282d8e3d
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com>
Arthur Heymans