The VBT is extracted from Chromium OS in developer mode with the device
running firwmare .
$ sudo dmesg | grep ' DMI:'
[ 0.000000] DMI: Dell Inc. Sarien/Sarien, BIOS Google_Sarien.12200.99.0 07/29/2020
$ sudo cbmem -1
coreboot-v1.9308_26_0.0.22-8761-gdba94f429a Wed Jul 29 16:09:30 UTC 2020 bootblock starting (log level: 8)...
[…]
coreboot-v1.9308_26_0.0.22-8761-gdba94f429a Wed Jul 29 16:09:30 UTC 2020 ramstage starting (log level: 8)...
[…]
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 614c0 size 4a0
Found a VBT of 4608 bytes after decompression
[…]
$ sudo cp /sys/kernel/debug/dri/0/i915_vbt vbt.bin
Using the Chrome OS recovery image, Matt DeVillier verified, that the
Sarien VBT is identical to Arcada, so add the VBT for all variants.
Change-Id: Ibab8a7b0b3f721ca434ac38b51528b81e66f3bb7
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove display from devicetree as Intel's brightness
controls are not used on this platform.
This solves the below errors appearing in dmesg:
No Local Variables are initialized for Method [_BCL]
No Arguments are initialized for method [_BCL]
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Icf2f2fa33abd11952c888c9502d1d5ef1ad6544f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
After checking them against schematics, a few unused GPIOs that were inherited
from the baseboard were missed, so this CL programs them as PAD_NC.
GPP_B2 => non-use
GPP_B15 => non-use (for FPR)
GPP_D3 => non-use (Test point)
GPP_E21 => non-use (for LCLW Detect)
BUG=b:211721639
TEST= USE="project_primus" emerge-brya coreboot
Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: I4e269bc6fb6eda7b2de57e1a9c900864d3e86e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Touch screen IC couldn't wake up after rebind with current 120 ms delay
after reset since the HID would be activated after 200 ms from reset.
This change increases the reset_delay_ms for touch device to 200 ms to
wait for the touch HID to be ready.
BUG=b:204950000
BRANCH=dedede
TEST=Verified that TSP IC could wake up after rebind
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I34cbc82e2d691266389d498e77d8389cdee23efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
More Brya variants like Anahera and Primus have migrated to use
Alder Lake QS SoC which enables eNEM feature by default. Hence,
select eNEM for CAR by default for these variants.
BUG=b:168820083
TEST=Able to build and boot primus variant using eNEM mode.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I65d12de08adf85140976e1a7659ad7b684aa75c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for Samsung K4U6E3S4AA-MGCR.
BUG=b:211950312
TEST=emerge-dedede coreboot
Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com>
Change-Id: Ic436db8fe3ef6fb8379ec629b128c05c691ea6fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
After removing GDB from crossgcc in commit f32eed16 (buildgcc: Remove
GDB from crossgcc), there is no target named all_without_gdb anymore
and we should always build crossgcc with target all.
But in util/docker/Makefile, we still try to build crossgcc with
target all_without_gdb as default and will cause a build failure.
Set CROSSGCC_PARAM from all_without_gdb to all to fix this issue.
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: I06c6d8e36dfd4e6a00ddec8b640b608ab1ba614c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Deprecating Herobrine Rev0 board. The next board is very different
from the Rev0 board (ie: Most GPIOs have been remapped). Deprecating
and reusing the GOOGLE_BOARD_HEROBRINE Kconfig for next board and
reslotting the old GOOGLE_BOARD_HEROBRINE source under
GOOGLE_BOARD_HEROBRINE_REV0 config. Want to keep the code around in
case somebody needs it but we can remove this code in future after we
recall all the Rev0 devices. Also updating the remapped GPIOs to
match those of the current herobrine board.
BUG=b:211644878
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I67a0b282710031b927ce9022c7c535bd8d4ca1aa
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Kano has non-stylus sku. Add a FW_CONFIG field to indicate
stylus presence and add a probe statement to the devicetree for the
corresponding device.
BUG=b:208179467
TEST=non-stylus doesn't register garage driver.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24839c39280185a6d649a82dd9f025ee305c2eed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add a new baseboard for nissa, an Intel ADL-N based reference design.
Also, add variants for the two reference boards, nivviks and nereid.
This commit is a stub which only adds the minimum code needed for a
successful build.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I2a3975fb7a45577fec8ea7c6c9f6ea042ab8cba5
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Taeko will use two PCIE port signals with one slot, one CLK and one
CLKREQ at next build. In order to accommodate this, probe statements
are added to the devicetree. This only affects NVME SSD and EMMC.
BUG=b:211914322
TEST=Build FSP with debug output enabled, and observe the correct root
ports being initialized depending on the FW_CONFIG values for BOOT_EMMC
and BOOT_NVME.
Cq-Depend: chromium:3358662
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I4486f23ea02374c84a9b1ce04f568d78aeabd573
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Building an image for the Purism Mini v2 with `x86_64-linux-gnu-gcc-11`
fails with the format warning below as the size of size_t differs
between 32-bit and 64-bit.
CC ramstage/soc/intel/common/block/acpi/pep.o
src/soc/intel/common/block/acpi/pep.c: In function 'read_pmc_lpm_requirements':
src/soc/intel/common/block/acpi/pep.c:57:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
57 | printk(BIOS_ERR, "Failed to retrieve LPM substate registers"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~
| |
| size_t {aka unsigned int}
src/soc/intel/common/block/acpi/pep.c:58:62: note: format string is defined here
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~~^
| |
| long unsigned int
| %u
src/soc/intel/common/block/acpi/pep.c:57:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
57 | printk(BIOS_ERR, "Failed to retrieve LPM substate registers"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~
| |
| size_t {aka unsigned int}
src/soc/intel/common/block/acpi/pep.c:58:71: note: format string is defined here
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~~^
| |
| long unsigned int
| %u
The variables `i` and `j` are of type size_t, so use the corresponding
length modifier `z`.
Fixes: 2eb100dd ("soc/intel/common/block/acpi: Add LPM requirements support to PEPD _DSM")
Change-Id: I27bce0a6c62b1c1ebbca732761de2f59b042a5d4
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Building an image for the Purism Mini v2 with `x86_64-linux-gnu-gcc-11`
fails with the format warning below as the size of size_t differs
between 32-bit and 64-bit.
CC ramstage/soc/intel/common/block/irq/irq.o
src/soc/intel/common/block/irq/irq.c: In function 'assign_fixed_pirqs':
src/soc/intel/common/block/irq/irq.c:186:90: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
186 | printk(BIOS_ERR, "ERROR: Slot %u, pirq %u, no pin for function %lu\n",
| ~~^
| |
| long unsigned int
| %u
187 | constraints->slot, fixed_pirq, i);
| ~
| |
| size_t {aka unsigned int}
CC ramstage/soc/intel/common/block/gspi/gspi.o
CC ramstage/soc/intel/common/block/graphics/graphics.o
CC ramstage/soc/intel/common/block/gpio/gpio.o
CC ramstage/soc/intel/common/block/gpio/gpio_dev.o
The variable `i` is of type size_t, so use the corresponding length
modifier `z`.
Fixes: b59980b54e ("soc/intel/common: Add new IRQ module")
Change-Id: I09f4a8d22a2964471344f5dcf971dfa801555f4a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The new settings from the thermal team improve performance mainly with
respect to fan control settings.
BRANCH=None
BUG=b:212210824
TEST=Built and tested on taeko board
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I2d5c9b6dff87a2e8897d74f3be89c965db22fe16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Taeko is going to exchange i2c port for touchscreen and cr50.
BUG=b:211911780
TEST=build pass
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ib7273ba107c58e4cd90db00e301a399d7a7df76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207527331
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I3df66eea13a3284d1453d7db6f7845e42a1dcb7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enable unused I2C4 PCI device (00:19.0) so that UART2 (00:19.2) can be
enumerated properly, using `PchSerialIoSkipInit` to prevent FSP-S from
configuring anything regarding I2C4 (e.g. GPIOs).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9c2c4f67672ba5667ebdae9ecc01054449dd3dfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Convert EC_GPI_SCI to Kconfig option with default value of
0x50 that is used by most boards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8d47ebe76394fe1bcb217e0c6211db1566f82189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
"integrated_graphics" is already used as a "bool" at line #2128.
So set it as "bool".
Change-Id: Ic5286e691c312e8e44bbbd8e782fdfd4a13cb60f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This restricts availability of non-standard functions (such as memmem)
on FreeBSD and macOS. It also isn't necessary on glibc.
Change-Id: Iaee1ce7304c89f128a35a385032fce16a2772b13
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
flashmap/fmap.c includes commonlib/bsd/sysincludes.h, which already
includes the necessary header for endian(3) functions (endian.h on
Linux and sys/endian.h on FreeBSD). This also resolves a compilation
error on macOS (tested on 10.5.7), as macOS does not provide endian.h.
Change-Id: I0cb17eacd253605b75db8cf734e71ca3fe24ad6c
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
macOS has never defined the usual endian(3)/byteorder(9) byte-swapping
functions. This change implements these byte-swapping functions using
the OSSwap functions, which provide identical functionality. This was
tested on macOS 10.15.7.
Change-Id: I44d59869a4420030f3ce26118175304c680d57a1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
GPP_CLK1 is used for SD and GPP_CLK2 is for WWAN on guybrush.
Disable unused PCIe GPP_CLK1 and GPP_CLK2 for dewatt.
BUG=b:211566312
TEST=emerge-guybrush coreboot
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: If449453bc60ed41e104346429babc06a73acef64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Retype the `pcie_port_coalesce` devicetree options and related variables
to better reflect their bivalue (boolean) nature.
Change-Id: I6a4dfe277a8f83a9eb58515fc4eaa2fee0747ddb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60416
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Super I/O resources were unused and not listed, causing warnings
during resource allocation. Suppress these warnings by setting them to
zero.
Change-Id: I28e37c3a58f3a6b5a613733f26ac18d6a7b3be2e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41459
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bugzzy uses panel-built-in touch screen, it needs to set panel power
and reset signal to high for touch screen to work.
On user mode, coreboot doesn't initialize graphics since there is no
screen display before OS. So we would add a WA to initialize required
signals on user mode. It takes under 30 ms delay on booting time.
BUG=b:205496327
BRANCH=dedede
TEST=Verified touch screen worked with test coreboot
and test touch screen 028D firmware
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Iaa4d16deb932f43ae1ab33ff5b4e74120ab670db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The latest schematics changes the EN_PP3300_SSD from GPP_D11 to GPP_F14,
I2C/DDC signals from GPP_E22/E23 to GPP_D11/D12.
BUG=b:206602609
TEST=build pass
Signed-off-by: Rory Liu <rory.liu@quanta.corp-partner.google.com>
Change-Id: I1e4aa6c540806c34b4a642f7813de0a64c6ea2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Paul Menzel