Link frequency and a format was not correct for volteer proto 2
ov2740 user-facing camera.
The link frequency is calculated in the following way.
(max frame width * max frame height * max fps * data format in bps
/ number of lanes / data rate) + max 35% of overhead
For ov2740, (1920 * 1080 * 60 * 10 / 2 / 2) = 311Mhz.
360Mhz after adding 18% of overhead.
BUG=b:148428976
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check user-facing camera functionalities.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I3b51826e123dec394c1b4eb9a1c5b64b8b11459e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41157
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update processor power limit configuration parameters based on
common code base support for Intel Tigerlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on volteer system
Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove unused processor power limit configuration parameter
and function call based on common code base support for
Intel Icelake SoC based platform.
BRANCH=None
BUG=None
TEST=Built for icelake based dragonegg board.
Change-Id: Id8923f2c176092b6f7acfbfb079587f88258dce8
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41236
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Volteer port 0 (MB PORT) does not have a retimer so the port needs
to be configured for the SOC to handle Aux orientation flipping. This
requires 2 changes setting the TcssAuxOri UPD to 1 for port 0 (Bit 0)
and configuring AUXP and AUXN GPIOs to Native Function 6 so SOC can
control the orientation
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: Ic81adc24d10322cc305bf0fa4c38514468ea0942
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
In order for the SOC to be able to control the Aux line orientation for
Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs
to be configurable through devicetree to correctly set the GPIO pins that
the SOC should use to flip orientation.
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Deltaur uses CNVi WLAN module, this setting is not required.
BUG=none
TEST=WiFi is functional in OS.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idb23e271074c8d1e111c559695d4169af5e0d3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add tcss.asl to support TCSS power management.
For the detail please refer cb:39785.
BUG=none
TEST=Check TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3
/sys/bus/pci/devices/bus:device:func/power suspend and
active time can increase.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I432f3d6643de13b08c07e47f799c0ecdfe047de6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41506
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add method acpi method GPID to return the GPIO PCR port ID.
This method is further planned to be used for GPIO power
management configuration.
TEST=Build waddledoo board
Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add low power idle table to notify EC system is entering s0ix.
BUG=none
TEST=Power button and keyboard backlight are off when suspending.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icf4dffe2bd289c15854bbad914c3b34b307254ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41494
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
By undefining the configuration after use we're sure that nobody else
comes to depend on it without us noticing.
Change-Id: I7c5cfd58be643d6431989fc69cf3b397920590b9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The resource allocator woes post-4.12 release showed room for
improvement on both discussion and documentation. To encourage this
(and encourage reviewers to look out for issues in that space),
extend the review guidelines so that they encourage to more clearly
document the reason for a change with the change (commit message or
our documentation) and also to loop in the mailing list.
Change-Id: I1962dba3fe7e1a01fa4c8b0058297c7d050cb7b7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Originally variants make use of a 32MB chip whereas now they
use a 16MB SPI flash. Allow for the coordination of dealing
with the transition between phases.
V.2: Leave Puff alone at the moment due to the complexity of
coordination.
BUG=b:153682192
BRANCH=none
TEST=none
Change-Id: Ic336168ea1a0055c30f718f5540209d2cf69d029
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40897
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I11b3ef8deda21930998471ab6e712da4c62f5b02
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change updates systemagent.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for auron.
Change-Id: I479bb6cb7ed4c9265325c7c8621f03454f21f467
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I2ff7a30fabb7f77d13acadec1e6e4cb3a45b6139
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change updates systemagent.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for soraka.
Change-Id: If8d8dd50af9a79d30f54e98f7f2fe7ce49188763
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CB:41454 updated northbridge.asl to ASL2.0 syntax. During this, GPCL
was incorrectly updated to use << (ShiftLeft) instead of >>
(ShiftRight). This change fixes the error in GPCL by updating it to
use >> (ShiftRight).
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for hatch.
Change-Id: I36469cb3b0bcc595acf0e43808d6a574986cad68
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41519
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add option to change bootloader file.
BUG=b:149934526
TEST=Change option and verify new bootloader file is used. Using the
amd_blobs I can only boot using PspBootLoader_test_RV_dbg.sbin.
Change-Id: Ib6597f7d4ffa0d48aead6974bd7111c987418f20
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2067598
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The PCI interrupt devices were only partially implemented.
* Lacked support for _DIS to disable the bus. Something the kernel does
while booting.
* Lacked support for APIC vs PIC. This means the devices can only be
used when using the PIC. By looking at the PMOD variable we can handle
both PIC and APIC. This means we can stop hard coding the PCI interrupt
numbers in the ACPI tables.
* I removed INT[E-H] since they are not used.
BUG=b:139429446, b:147042464
BRANCH=none
TEST=Boot with both the APIC and PIC and saw that the link devices work
as expected:
PIC MODE:
[ 1.959345] ACPI: PCI Interrupt Link [IRQA] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15)
[ 2.007344] ACPI: PCI Interrupt Link [IRQB] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15)
[ 2.056344] ACPI: PCI Interrupt Link [IRQC] (IRQs 1 3 4 5 6 7 8 9 10 11 12 *14 15)
[ 2.104344] ACPI: PCI Interrupt Link [IRQD] (IRQs 1 3 4 5 6 7 8 9 10 11 12 14 *15)
[ 13.752676] PCI Interrupt Link [IRQA] enabled at IRQ 6
[ 13.816755] PCI Interrupt Link [IRQD] enabled at IRQ 15
[ 27.788798] PCI Interrupt Link [IRQB] enabled at IRQ 6
[ 27.852873] PCI Interrupt Link [IRQC] enabled at IRQ 14
APIC MODE:
[ 19.311764] ACPI: PCI Interrupt Link [IRQA] (IRQs *16 17 18 19 20 21 22 23)
[ 19.374765] ACPI: PCI Interrupt Link [IRQB] (IRQs 16 *17 18 19 20 21 22 23)
[ 19.438770] ACPI: PCI Interrupt Link [IRQC] (IRQs 16 17 *18 19 20 21 22 23)
[ 19.501764] ACPI: PCI Interrupt Link [IRQD] (IRQs 16 17 18 *19 20 21 22 23)
[ 34.719072] PCI Interrupt Link [IRQA] enabled at IRQ 23
[ 34.798994] PCI Interrupt Link [IRQD] enabled at IRQ 22
[ 66.469510] PCI Interrupt Link [IRQB] enabled at IRQ 21
[ 66.542395] PCI Interrupt Link [IRQC] enabled at IRQ 20
Change-Id: I1bb84813b65c89b4b5479602be3e9a9fedb7333d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095683
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The _PIC method sets the interrupt model (PIC or APIC). It needs to be
defined at the root level for the kernel to find it. Previously this
method was never getting called, so we were always stuck in APIC mode.
BUG=b:139429446, b:147042464
BRANCH=none
TEST=Saw the method getting called
[ 1.251774] ACPI Debug: "PIC MODE: 0000000000000001"
Change-Id: Idd5e9646df8d56e7cbec2be8b4016c36d81e5fb8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095682
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Remove the Kconfig options for per board socket type selection and use
the runtime detection instead.
Change-Id: I82cf922661c24e2a529fa4927893727b643660e3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41518
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This header implements structures to describe the properties defined in
the SoundWire Discovery and Configuration Specification Version 1.0.
By itself this just provides the property definitions, it is then used
by the code that generates ACPI device properties and by the controller
and codec drivers.
A new header for MIPI vendor/device IDs is also added, with the MIPI
Alliance board members added by default. This will be used in the same
way as pci_ids.h to track devices added to coreboot.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ie9901d26d1efe68edad7c049c98a976c4e4f06f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The common PnP serial port DSDT code is intentionally included twice for
two serial ports with different LDNs. Undefine LDN and the PM register
name before redefining for second serial port so iasl doesn't complain.
Change-Id: I031905479c66698fb01da028e3f37d923396d2d9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41095
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Other northbridges use an index variable to assign monotonically
incrementing values to each resource. Do it here as well.
Change-Id: I8719a1a5973a10531cf11b3307652212cb3d4895
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The current implementation uses strcmp() without splitting the list
and therefore returns false even when the string pointed to by
'name' is a part of 'whitelist'. The patch fixes this problem.
Also, update help text of CONFIG_TPM_MEASURED_BOOT_RUNTIME_DATA to
space delimited list to align it with the other lists we use.
Change-Id: Ifd285162ea6e562a5bb18325a1b767ac2e4276f3
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The IOSAV register descriptions are plagued with errors and nonsense.
Using `git blame` to find the culprit... Zoinks! Turns out it was me!
Rewrite the comment so that the difference between a sub-sequence and a
command is clear. Also, expand the descriptions that could be ambiguous
and fix some insane blunders. CKE and ODT fields are per DIMM and rank!
As per review comments, also invert the order of bitfield value ranges.
Change-Id: Ie384304c565f962fe58baa231c15109eb3d284aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch adds a basic test for the common region and region_device
APIs, sanity checking the basic functions and things like
overflow-handling. There is certainly more that could be added here, but
it's a start.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4932402f54768557e5b22b16e66220bd90ddebfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41046
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jan Dabros
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<cmocka.h> requires a few standard headers to be explicitly included
before itself or it will throw compilation errors. Having to always
include these headers in the right order in every test is cumbersome.
Instead, this patch encapsulates the problem in a new <tests/test.h>
header that all tests should include (instead of <cmocka.h> directly).
Also fix --gc-sections in the test framework which needs to be passed
for linking, not for compiling.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4284d74c8673708e21a5266eb42f7b9ae19a1b12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Add telemetry setting for SDLE testing
BUG=b:147570294
TEST=Build Morphius and check the setting was been applied
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If4bb75eeaaa68b2c5a6a36c28c34fb338be65851
Reviewed-on: https://chromium-review.googlesource.com/2056885
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
X230s and T431s have keyboard similar to the one found on t440p, so
H8_HAS_PRIMARY_FN_KEYS and related cmos options may apply to them.
Tested on both X230s and T431s.
Change-Id: I234820b92093acdd64ff60cae39015547b6e981e
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41403
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On the Picasso architecture, the PSP is responsible for setting up DRAM
before releasing the x86. The APCB (AGESA PSP Configuration Block)
contains multiple SPDs and the GPIO numbers used to select the correct
SPD. Since the source to build the APCBs is not public, it can't be
built as part of the coreboot build. To work around this problem, we use
a template APCB and inject the relevant information.
BUG=b:147042464
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I88a09743f8e8a184c47071ee5e417f5b6bdb7467
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2123799
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This adds FSP UPD TcssDma0En and TcssDma1En for configuration.
BUG=🅱️146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I04af970f74ab9dfe84f9c0c09ec2098e0093fa57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Fix unterminated array.
When looking for a type not specified in filetypes (cbfs.h:204), the
loop in lookup_name_by_type (cbfs_image.c:60) will run into a buffer
over-read.
Found-by: AFL++ 2.64d rev 1317433
Signed-off-by: Philipp Bartsch <phil@grmr.de>
Change-Id: Ib82bb92e82b09fa1e26b9ca34529ec7b98e8f7b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41421
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:147042464
TEST=build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie6ac8b0701ac27733dd9724873664f5f17fcfa29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
No code that was or will be upstreamed uses functionality from soc_util
in romstage, so only compile and link it for ramstage.
This also allows to fix the SoC type detection in a follow-up patch
using information that FPS-M will be providing in a HOB.
BUG=b:153779573
Change-Id: If96e53608eadd562f6de5a0c370b89e84e43d049
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The struct (formerly assigned to default_pci_ops_bus.ops_pci) only
contained a NULL (well, 0) pointer for the set_subsystem callback, but
usage of that callback is guarded with NULL checks when it is used,
therefore it can be removed.
TEST=still compiles
Change-Id: I3943c8ae73b95e744a317264d7ceb8929cb28341
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41432
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>