Disable unused PCIE8 for fix system can not enter S0ix completely.
BUG=b:261915226
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I06f8bd06e1fe92c03bd5625a41469830ce37a11c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70660
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Rename the MIPI PWM control GPIO to be consistent with the schematic.
BUG=b:244208960
TEST=test firmware display pass for eDP and MIPI panels on MT8188 EVB
Change-Id: I6a3368d438cb50b257992260d1388f0b7e0f5ace
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70822
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There are two ways to control backlight in geralt:
1. MIPI/eDP panel => control backlight via the GPIOs.
(`backlight chip enable` and `PWM dimming control`)
2. eDP OLED panel => enable backlight via `backlight chip enable` and
control dimming over AUX.
For MIPI/eDP panels(#1), both "backlight enable" and "PWM control" GPIOs
will be passed from coreboot. For eDP OLED panel(#2), only the
"backlight enable" GPIO will be passed. If depthcharge successfully gets
the GPIOs, it will use them to control backlight.
BUG=b:244208960
TEST=test firmware display pass for eDP and MIPI panels on MT8188 EVB
Change-Id: I866fa219722241008e2b0d566b29edf2f6d9321f
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70744
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct touchscreen setting to make touchscreen function workable.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=Built and verified touchscreen function
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ia98deae65ef0e2f501457331144b044e07431a3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
dw_i2c_soc_dev_to_bus will return -1 if it failed to find an I2C bus
number for a device. In this case return -1 instead of implicitly
casting the -1 to an unsigned int and passing that as bus number to
dw_i2c_transfer. The dw_i2c_base_address call inside _dw_i2c_transfer
already ended up handling this error case correctly, but better handle
the error more directly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06b6005cee0c5c43855cb5b388a9911fc286c984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There's no need to call die() in the case that the MMIO address of the
I2C controller is NULL, so handle this case by returning a failure
instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12c143916ad551c56cc4ff75ae23754018817505
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This fixes the following error:
In file included from src/mainboard/siemens/mc_apl1/dsdt.asl:21:
src/soc/intel/apollolake/acpi/northbridge.asl:15:12: warning: '/*' within block comment [-Wcomment]
PXEN, 1, /* Enable */
^
Change-Id: I1173eed69847f4c3b307ce96d76fb7185dc2f85c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70767
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
If the temporary nvdata storage inside the vboot context is already
initialized then return immediately without reinitializing from the
backup NV storage. This allows vbnv_init to be called more than once.
Also the check to enable USB Device Controller (UDC) happens after
NVdata is initialized. Hence the nvdata in vboot context can be used
instead of reading from the backup storage again.
BUG=b:242825052
TEST=Build Skyrim BIOS image and boot to OS in Skyrim.
Change-Id: Id72709e2fc3fe6a12ee96df8df25e55cf11e50a7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
After the previous patch this local variable is no longer the mpinit CPU
index, but the LAPIC ID, so rename it. Since it will only be set once,
it can also be marked as const.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4fad4e1095478213727bee8586852f9d5a7d18e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70798
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This patch updates the GPIO PIN name as per Proto 1 schematics dated
12/14/2022.
TEST=Not code change, just updated the comment section.
Change-Id: Ic076ab35689fd2afb7c18eff065a90b9464a6b1d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This was done previously for ADL. moving the code to common so
it can be leveraged for other platforms (e.g. MTL)
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I45eded3868a4987cb5eb0676c50378ac52ec3752
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Update RAM ID table because H9JCNNNFA5MLYR-N6E is using spd-4.hex
instead of spd-9.hex.
Reserve RAM ID 3 for it, so the RAM ID table remains the same.
BUG=b:261530632
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot chromeos-bootimage
Then boot devices successfully
Change-Id: I1b683168310f74a07d246af8618b977cce32287a
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Update bitWidthPerChannel in memory_parts.json and re-generate the SPD.
Then the device boots successfully with DDR H9JCNNNFA5MLYR-N6E.
BUG=b:261530632
BRANCH=None
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Change-Id: Ib78c2e28394206b59c41b6b28cf24d8a756f7ae9
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
pujjo support FM101 WWAN, add delay of FCPO# to meet warm reset toff
minimum 500ms requirement.
BUG=b:260380268
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I63e599e76bd8a15ca44717823411576fa4df1c26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
BUG=none
TEST=Build and boot to the OS on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2c5bac880e7dbc2ec14376c5cee3c13363bab377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70444
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 148e5b83:
Makefile: Fix and simplify the RUNTEST test wrapper
to commit id 196b0843:
create_new_keys: use single AP RO Verification root key pair
This brings in 30 new commits.
Change-Id: Iedfc6cf0ff2dc1913a7a41a4302dc1951abf8a8a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:252966799
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I175f7f39d6115d1f082575393c45734c7b02e346
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Disable L1 substates for PCIe compliance test mode in order to get
continuous clock output.
BUG=b:235863379
TEST=Boot in compliance mode, check FSP settings
Signed-off-by: Bora Guvendik <bora.guvendik@intel.corp-partner.google.com>
Change-Id: I2a3b313425e00fe11f616d964f825baaef463c71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70165
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The cpu_index function can't be used before mpinit, so use lapicid calls
instead. This fixes the regression introduced by commit 4c3749884d
("cpu/x86/mtrr: Print cpu index number when set up MTRRs for BSP/APs")
and also reverts also commit b3261661c7 ("cpu/x86/mtrr/mtrr: fix
printk format strings"), since lapicid returns an unsigned int while
cpu_index returns an unsigned long.
TEST=Mandolin boots again and doesn't fail when it first tries to print
the MTRR configuration
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0d226704051ab171891775a618ce7897b74fde16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70797
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The calculation for mem_chip_info_total_density_bytes() may already
overflow in the intermediate 32-bit calculations before being assigned
to the 64-bit result variable. Fix that.
Fixes Coverity issue: CID 1501510
BRANCH=corsola
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I73da014c953381974c6ede2b17586b68675bde2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add PCIe RTD3 support for Skyrim
BUG=b:245550573
TEST=Boot/Reboot cycles and Suspend_stress_test 10 times
Signed-off-by: JasonNien <finaljason@gmail.com>
Change-Id: I7f01827613eea2f254bc42c7f5aebeeb969b163a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70740
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Remove more TODO comments after reviwing against morgana ppr #57396, rev
1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7fd9666a69d9a2b0902fa28ab0af0187198297ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70466
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang -Wshadow is more rigorous than GCC and picks a shadowing of the
optarg global variable in /usr/include/bits/getopt_core.h .
TESTED: builds with both gcc and clang.
Change-Id: Ifc362c84511abb6a000671f03498e841d7747074
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70508
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Since soc_get_common_config will either return a valid pointer or cause
a linking error, this function will also return a valid pointer or cause
a linking error, so no need for additional runtime checks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I99661247b9f8f47a708e3a6ff3f9e5359b505509
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70739
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Since commit 28e61f1634 ("device: Use __pci_0_00_0_config in
config_of_soc()") config_of_soc() was changed form being an actual
function to a macro for the __pci_0_00_0_config struct pointer generated
by util/sconfig. This change didn't only improve linker optimizations,
but also turned runtime errors into link-time errors, so it's guaranteed
that __pci_0_00_0_config won't be NULL and config_of_soc() won't
"return" NULL.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id99ceaa9f7a70788da3f3068fb3da92d34fb6361
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70732
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Improve the espi_set_initial_config implementation so that a failure in
there due to an invalid configuration won't call die() and stop booting
at this point, but return an error to the caller so that the rest of the
eSPI configuration will be skipped.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97f730778a190c4485c4ffe93edf19bcbaa45392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Improve the eSPI pin configuration setup so that a failure in there
won't call die() and stop booting at this point, but return an error to
the caller so that the rest of the eSPI configuration will be skipped.
This will prevent an early boot failure if the EC is missing or the eSPI
interface is in a non-functional state. Also slightly shorten the
function names so that the code still fits into 96 chars.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice2d3a791d6a464eff4fb69d02aeca0bfe580be2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70730
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Make sure that a pointer exists before dereferencing it.
Change-Id: I1a9833bb9686451224249efe599346f64dc37874
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Test framework can be used as a base for other test-like utilities - for
example look at screenshoot utility in depthcharge. Sometimes CMocka is
not required and even makes things problematic. Thanks to this patch one
can set -no_test_framework parameter to instruct framework not to
include and link selected test against CMocka library.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I01dc7c6c50e6ae2f7f71bd6752c2d5f2cc7c3cdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
The patch adds helper function to get the DP mode.
TEST=Build the code for Rex
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I02ed1f818e77c37ead8ce962fa12fddfdc8efeb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The struct device passed to this function is the cpu cluster and not
individual lapic. This fixes a regression introduced by
cdb26fd (cpu/intel/model_206ax: Remove fake lapic device)
Change-Id: I586e13a723303b8d639d526a175bd6828465a607
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch drops the redundant macro to define CPU BCLK and instead
uses `CPU_BCLK_MHZ` config to calculate the
`smbios_cpu_get_max_speed_mhz`.
TEST=Able to see max cpu speed is correct in smbios table while trying
on Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5167f3a513c074b9e6986c960e1bcced65f1264c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70676
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch drops NEM support from MTL and enables eNEM support.
BUG=b:217130861
TEST=Able to build and boot Google/Rex in eNEM mode.
Change-Id: I6ef915ec0caf0d95b488602950b0b25958ec4cbd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70673
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch combines all required configs under one umbrella config
named `METEORLAKE_CAR_ENHANCED_NEM`.
MTL SoC to select this config if default NEM (INTEL_CAR_NEM) is not
selected.
BUG=b:217130861
TEST=Able to build and boot Google/Rex.
Change-Id: Iceab7cdf2973f3858d4aa83fb431ba832c0868d6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70672
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch moves all required TCSS related configs under one umbrella
config named `SOC_INTEL_METEORLAKE_TCSS_USB4_SUPPORT`. This effort will
help in future to deselect the TCSS support for MTL SoC SKUs.
TEST=Able to build and boot Google/Rex.
Change-Id: Id86e52842d2f8ab4dbec4a8776791e1266b94298
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70671
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch calls into a helper function to fill `2nd microcode loading
FSP UPD` if FSP is running CPU feature programming.
This patch is backported from
commit fad1cb062e (soc/intel/alderlake:
Fill ucode loading UPD if USE_FSP_MP_INIT enable).
Change-Id: Id8c8bfd844b3213cc260df20c359b0b1437e3e28
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70599
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch drops deprecated FSP UPD `SkipMpInit` as Intel MTL FSP
doesn't like to allow an option for boot firmware to perform CPU feature
programming being independent of FSP.
Change-Id: I6447937838ab91551d172936cbb4201ea86a614b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70557
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch drops enable_bios_reset_cpl() as FSP sets the BIOS Reset
CPL before performing Graphics PM init (as part of FSP-S), hence,
enable_bios_reset_cpl() function getting called inside systemagent.c
is meaningless.
Also, drop 1ms delay after setting the BIOS reset CPL.
This patch is backported from
commit 3f980ca7be (soc/intel/alderlake:
Drop enable_bios_reset_cpl() function).
Change-Id: Ia31867153b3b5f132c393a605c44616acfd7a34b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70556
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Drops the `FIXME` comment and relevant code as this patch enables
VMX and VTD.
This patch also fixes the problem of additional reboot on every warm
boot due to overriding the CPU soft-strap.
TEST=No extra reboot seen while issuing warm reset from kernel
console.
without this patch:
950:calling FspMemoryInit 1,225,259 (20,537)
951:returning from FspMemoryInit 10,334,707 (9, 109,447)
with this patch:
950:calling FspMemoryInit 1,225,259 (20,537)
951:returning from FspMemoryInit 1,334,707 (109,447)
Change-Id: Ib130698e7255876c5a12abc93dd7d8a34dfae968
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70553
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With 1ms delay, reset is de-asserted too soon, before power is fully
up, causing a glitch to the reset signal. The issue is resolved with
4ms delay.
TEST=tested on dratini device and observed the issue is resolved.
BUG=b:260253945
Change-Id: I5c3edbc6ac90d5042c2d3c5b01573d4bb1ea676d
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70666
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sridhar Siricilla