.. |
a-trend
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
abit
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
advantech
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
amd
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
arima
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
artecgroup
|
first round name simplification. drop the <component>_ prefix.
|
2010-12-08 05:42:47 +00:00 |
asi
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
asrock
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
asus
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
axus
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
azza
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
bcom
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
biostar
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
broadcom
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
compaq
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
dell
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
digitallogic
|
Move "select CACHE_AS_RAM" lines from boards into CPU socket.
|
2010-12-08 08:22:04 +00:00 |
eaglelion
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
ecs
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
emulation
|
We hardcode highmemory size in every northbridge! This is bad, and especially if suspend to ram is involved. Let the default be taken from cbmem.h which also handles the suspend logic.
|
2010-12-13 19:50:25 +00:00 |
getac
|
[i945] Add SPD adress mapping
|
2011-02-21 09:39:17 +00:00 |
gigabyte
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
hp
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
ibase
|
[i945] Add SPD adress mapping
|
2011-02-21 09:39:17 +00:00 |
ibm
|
Get mptable OEM/product ID from kconfig variables.
|
2010-12-16 19:51:38 +00:00 |
iei
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
intel
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
iwave
|
oops. this is weird. CAR addresses should be specified in the socket and not in
|
2011-01-27 01:11:20 +00:00 |
iwill
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
jetway
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
kontron
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
lanner
|
Move "select CACHE_AS_RAM" lines from boards into CPU socket.
|
2010-12-08 08:22:04 +00:00 |
lenovo
|
X60: LPC bus is LPCB, not LPC
|
2011-03-14 15:23:44 +00:00 |
lippert
|
-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)
|
2010-12-29 21:12:10 +00:00 |
mitac
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
msi
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
nec
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
newisys
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
nokia
|
Various Nokia IP530 fixes.
|
2011-01-06 23:03:46 +00:00 |
nvidia
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
pcengines
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
rca
|
Move "select CACHE_AS_RAM" lines from boards into CPU socket.
|
2010-12-08 08:22:04 +00:00 |
roda
|
Fix some subsystemid statements in r6421
|
2011-03-01 22:02:37 +00:00 |
soyo
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
sunw
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
supermicro
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
technexion
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
technologic
|
push ts5300 rom size to 1MB. In fact the flash part on that
|
2011-01-21 07:46:32 +00:00 |
televideo
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
thomson
|
Move "select CACHE_AS_RAM" lines from boards into CPU socket.
|
2010-12-08 08:22:04 +00:00 |
traverse
|
first round name simplification. drop the <component>_ prefix.
|
2010-12-08 05:42:47 +00:00 |
tyan
|
Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF.
|
2011-03-08 23:01:46 +00:00 |
via
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
winent
|
second round name simplification. drop the <component>_ prefix.
|
2010-12-08 07:07:33 +00:00 |
wyse
|
Use subsystem id from devicetree.cb instead of Kconfig and move
|
2011-03-01 19:58:47 +00:00 |
Kconfig
|
Lenovo ThinkPad X60 / X60s Support
|
2011-02-14 20:02:47 +00:00 |