9981cad801
In printf/printk, using %lld or %ld for uint64_t will warn on either 64bit or 32bit machines. However, C99 defines PRIx64 / PRId64 to provide the right modifiers for printing uint64_t variables. Use them instead. Change-Id: I68df5d069a1e99d1a75885173ddfd7815197afea Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1053 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> |
||
---|---|---|
.. | ||
accessors | ||
cli | ||
COPYING | ||
ChangeLog | ||
DISCLAIMER | ||
Makefile | ||
Makefile.inc | ||
README | ||
cbfs.c | ||
cbfs.h | ||
cmos_lowlevel.c | ||
cmos_lowlevel.h | ||
cmos_ops.c | ||
cmos_ops.h | ||
common.c | ||
common.h | ||
compute_ip_checksum.c | ||
coreboot_tables.h | ||
hexdump.c | ||
hexdump.h | ||
input_file.c | ||
input_file.h | ||
ip_checksum.h | ||
layout.c | ||
layout.h | ||
lbtable.c | ||
lbtable.h | ||
nvramtool.spec | ||
reg_expr.c | ||
reg_expr.h |
README
Summary of Operation -------------------- nvramtool is a utility for reading/writing coreboot parameters and displaying information from the coreboot table. It is intended for x86-based systems (both 32-bit and 64-bit) that use coreboot. The coreboot table resides in low physical memory, and may be accessed through the /dev/mem interface. It is created at boot time by coreboot, and contains various system information such as the type of mainboard in use. It specifies locations in the CMOS (nonvolatile RAM) where the coreboot parameters are stored. For information about coreboot, see http://www.coreboot.org/. Ideas for Future Improvements ----------------------------- 1. Move the core functionality of this program into a shared library. 2. Consider adding options for displaying other BIOS-provided information such as the MP table, ACPI table, PCI IRQ routing table, etc.