coreboot-kgpe-d16/payloads/libpayload
Eric Lai da10b9224a libpayload/usb: add USB 3.1 GEN2 support
USB 3.1 GEN2 report speed type 4, add into speed enum.

BUG=b:139787920
BRANCH=N/A
TEST=Build libpayload and depthcharge on sarien and boot with
USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log.

Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27 07:21:00 +00:00
..
arch libpayload: Align main() data types 2019-04-05 22:37:19 +00:00
bin
configs payloads/libpayload: Update a Makefile for sample libpayload 2019-06-21 09:16:36 +00:00
crypto payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) 2019-03-07 17:15:30 +00:00
curses libpayload: Enable -Wimplicit-fallthrough 2019-07-21 17:17:42 +00:00
drivers libpayload/usb: add USB 3.1 GEN2 support 2019-08-27 07:21:00 +00:00
gdb libpayload: gdb: Factor out gdb_handle_reentrant_exception() from arm32 2018-10-12 20:17:40 +00:00
include libpayload/usb: add USB 3.1 GEN2 support 2019-08-27 07:21:00 +00:00
libc Add buffer_to/from_fifo32(_prefix) helpers 2019-08-22 10:36:22 +00:00
libcbfs payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) 2019-03-07 17:15:30 +00:00
liblz4 Rename __attribute__((packed)) --> __packed 2017-07-13 19:45:59 +00:00
liblzma
libpci libpayload: Add pci_free_dev() and some boilerplate 2017-12-07 21:51:24 +00:00
sample payloads/libpayload: Update a Makefile for sample libpayload 2019-06-21 09:16:36 +00:00
tests
Doxyfile payloads: Remove/fix trailing whitespace 2018-09-04 12:38:40 +00:00
Kconfig libpayload: Add UART for qcs405 2019-06-04 14:14:58 +00:00
LICENSES
LICENSE_GPL
Makefile libpayload: Make libpayload compile using gnu11 2018-07-16 07:44:03 +00:00
Makefile.inc Makefile.inc, payloads: Enable -Wvla 2019-08-20 20:57:01 +00:00
README payloads/libpayload: Update a Makefile for sample libpayload 2019-06-21 09:16:36 +00:00

README

-------------------------------------------------------------------------------
libpayload README
-------------------------------------------------------------------------------

libpayload is a minimal library to support standalone payloads
that can be booted with firmware like coreboot. It handles the setup
code, and provides common C library symbols such as malloc() and printf().

Note: This is _not_ a standard library for use with an operating system,
rather it's only useful for coreboot payload development!
See https://www.coreboot.org for details on coreboot.


Installation
------------

 $ git clone https://review.coreboot.org/coreboot.git

 $ cd coreboot/payloads/libpayload

 $ make menuconfig

 $ make

 $ make install (optional, will install into ./install per default)

On x86 systems, libpayload will always be 32-bit even if your host OS runs
in 64-bit, so you might have to install the 32-bit libgcc version.
On Debian systems you'd do 'apt-get install gcc-multilib' for example.

Run 'make distclean' before switching boards. This command will remove
your current .config file, so you need 'make menuconfig' again or
'make defconfig' in order to set up configuration. Default configuration
is based on 'configs/defconfig'. See the configs/ directory for examples
of configuration.


Usage
-----

Here's an example of a very simple payload (hello.c) and how to build it:

 #include <libpayload.h>

 int main(void)
 {
     printf("Hello, world!\n");
     return 0;
 }

Building the payload using the 'lpgcc' compiler wrapper:

 $ lpgcc -o hello.elf hello.c

Please see the sample/ directory for details.


Website and Mailing List
------------------------

The main website is https://www.coreboot.org/Libpayload.

For additional information, patches, and discussions, please join the
coreboot mailing list at https://www.coreboot.org/Mailinglist, where most
libpayload developers are subscribed.


Copyright and License
---------------------

See LICENSES.