Go to file
Seunghwan Kim 9341920453 mb/google/dedede/var/bugzzy: Set core display clock to 172.8 MHz
When using the default initial core display clock frequency (648MHz),
Jasper Lake board might have a rare stability issue where the startup
of Chrome OS in secure mode may hang during re-initializing display in
kernel graphic driver.

Bugzzy didn't show this problem so far, but Intel recommends slowing
the initial core display clock frequency down to 172.8 MHz to prevent
this potential problem.

Depend on CL: https://review.coreboot.org/c/coreboot/+/60009
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for bugzzy.

BUG=None
BRANCH=dedede
TEST=Build firmware and check the DUTs can boot up in secure mode well.

Change-Id: I592b2d7c814881074bd2fef9906f2450326c1fcd
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-17 15:51:27 +00:00
3rdparty Update vboot submodule to upstream master 2022-01-04 06:49:49 +00:00
Documentation Documentation: Capture anomalies between pad and lock reset type 2022-01-13 20:19:37 +00:00
LICENSES treewide: Remove trailing whitespace 2021-02-17 17:30:05 +00:00
configs configs: Add build test configs for CBFS verification 2022-01-08 00:41:18 +00:00
payloads libpayload: Install vboot headers and add include paths to lpgcc 2022-01-15 00:22:41 +00:00
spd spd: Add new LP5 parts and generate SPDs 2021-11-08 14:48:49 +00:00
src mb/google/dedede/var/bugzzy: Set core display clock to 172.8 MHz 2022-01-17 15:51:27 +00:00
tests tests: Fix tests code and comments style 2022-01-14 14:29:29 +00:00
util util/cbfstool: Port elogtool to libflashrom 2022-01-14 23:10:55 +00:00
.checkpatch.conf lint: checkpatch: Only exclude specific src/vendorcode/ subdirectories 2021-04-06 16:04:41 +00:00
.clang-format
.editorconfig
.gitignore .gitignore: Ignore .test/.dependencies globally 2020-10-31 18:21:36 +00:00
.gitmodules .gitmodules: Update intel-microcode submodule to track branch=main 2021-06-09 17:20:50 +00:00
.gitreview
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
MAINTAINERS MAINTAINERS: Add libpayload unit-tests to TESTS section 2021-12-16 23:46:23 +00:00
Makefile Makefile: Defer normalizing configuration for reproducible builds 2022-01-14 00:30:04 +00:00
Makefile.inc guybrush: Inject SPDs into APCB 2022-01-10 14:25:40 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
toolchain.inc build system: immediately report what users are supposed to look into 2021-10-18 16:39:25 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.