Go to file
Nick Vaccaro 98189771ab mb/google/poppy/variant/nocturne: add EC_SYNC_GPIO
Setup EC_PCH_ARCORE_INT_L, tied to GPP_D17, and define as EC_SYNC_GPIO..

 - change GPP_D17 definition to PAD_CFG_GPI_APIC_INVERT as
   EC_PCH_ARCORE_INT_L is active low

 - add EC_SYNC_GPIO to the group of chromeos_gpios for use by depthcharge

BUG=b:139384979
BRANCH=none
TEST="emerge_nocturne coreboot depthcharge chromeos-bootimage",
flash & boot nocturne in dev mode, verify that volume up and down
buttons work in the dev screen and that the device boots properly into
the kernel.

Change-Id: Ia43c622710fde8686c60b836fb8318931d79eb61
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-10 12:17:56 +00:00
3rdparty 3rdparty/ffs: add open-power ffs utils 2019-08-25 07:37:11 +00:00
Documentation superio/common: Add ssdtgen for generic SuperIOs 2019-09-06 15:31:06 +00:00
configs cpu/x86/smm: Promote smm_memory_map() 2019-08-15 05:46:59 +00:00
payloads payloads/external/LinuxBoot: Add curl flag 2019-09-02 06:38:57 +00:00
src mb/google/poppy/variant/nocturne: add EC_SYNC_GPIO 2019-09-10 12:17:56 +00:00
util util/sconfig: Expose usable PCI and PNP device names 2019-09-06 00:18:29 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format lint/clang-format: set to 96 chars per line 2019-06-13 20:14:00 +00:00
.gitignore util/bucts: Add tool to manipulate BUC.TS bit on Intel targets 2018-11-19 08:19:16 +00:00
.gitmodules 3rdparty/ffs: add open-power ffs utils 2019-08-25 07:37:11 +00:00
.gitreview add .gitreview 2012-11-01 23:13:39 +01:00
AUTHORS AUTHORS: Move src/arch/ppc64 copyrights into AUTHORS file 2019-08-28 09:21:05 +00:00
COPYING
MAINTAINERS MAINTAINERS: Step down as RISC-V maintainer 2019-08-05 22:43:36 +00:00
Makefile Makefile: Move the .xcompile rule out of the if !NOCOMPILE block 2019-08-28 09:22:09 +00:00
Makefile.inc Makefile: Pass .xcompile into genbuild_h 2019-08-28 18:29:15 +00:00
README.md README: Convert to Markdown 2018-09-16 13:01:58 +00:00
gnat.adc gnat.adc: Do not generate assertion code for Refined_Post 2016-10-29 01:33:31 +02:00
toolchain.inc Split MAYBE_STATIC to _BSS and _NONZERO variants 2019-08-26 20:56:29 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.