GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
No description
39304 commits 1 branch 29 tags 216 MiB
C 90.7%
ASL 5.1%
Makefile 1.1%
Assembly 0.9%
Pawn 0.6%
Other 1.5%
Find a file
Michael Niewöhner ec1c0f5337 mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-level 
Do LPC/eSPI pad configuration at board-level to match other platforms.

Early gpio configuration was done in romstage, while LPC pads were
configured in bootblock. Instead of adding another dedicated gpio table
for bootblock, move early gpio configuration completely to bootblock on
these boards. This won't hurt, since there is no code touching the pads
in between.

The soc code gets dropped in CB:49410.

Change-Id: I2a614afb305036b0581eac8ed6a723a3f80747b3
Tested-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-01-15 11:26:20 +00:00
3rdparty amd_blobs: Add new picasso VBIOS 2021-01-14 01:16:08 +00:00
configs configs: Add a weird config for Asus P8Z77-V LX2 2020-12-14 21:01:17 +00:00
Documentation Documentation: Fix toctree and remove dead links 2021-01-12 13:36:36 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
payloads build system: Structure and serialize INTERMEDIATE 2021-01-14 16:53:06 +00:00
src mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-level 2021-01-15 11:26:20 +00:00
tests device: Use __pci_0_00_0_config in config_of_soc() 2021-01-12 05:22:40 +00:00
util util/cbfstool: unbreak compilation on FreeBSD 2021-01-13 12:07:17 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format lint/clang-format: set to 96 chars per line 2019-06-13 20:14:00 +00:00
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore .gitignore: Ignore .test/.dependencies globally 2020-10-31 18:21:36 +00:00
.gitmodules 3rdparty: Add STM as a submodule 2020-09-30 10:17:03 +00:00
.gitreview add .gitreview 2012-11-01 23:13:39 +01:00
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
MAINTAINERS MAINTAINERS: Add maintainer for ACPI 2021-01-04 23:13:18 +00:00
Makefile Makefile: Add $(xcompile) to specify where to write xcompile 2020-12-23 03:40:35 +00:00
Makefile.inc build system: Structure and serialize INTERMEDIATE 2021-01-14 16:53:06 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
toolchain.inc Remove MAYBE_STATIC_BSS and ENV_STAGE_HAS_BSS_SECTION 2020-05-26 15:04:08 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

Copyright and License

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.