coreboot-kgpe-d16/src/lib/Makefile.inc

225 lines
6.6 KiB
PHP
Raw Normal View History

#
# This file is part of the coreboot project.
#
# Copyright (C) 2009 coresystems GmbH
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
Remove address from GPLv2 headers As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-03-26 15:17:45 +01:00
# Foundation, Inc.
#
subdirs-y += loaders
bootblock-y += assets.c
bootblock-y += prog_loaders.c
bootblock-y += prog_ops.c
bootblock-y += cbfs.c
bootblock-y += cbfs_boot_props.c
Provide a common CBFS wrapper for SPI storage Coreboot has all necessary infrastructure to use the proper SPI flash interface in bootblock for CBFS. This patch creates a common CBFS wrapper which can be enabled on different platforms as required. COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the common CBFS interface and prevents default inclusion of all SPI chip drivers, only explicitly configured ones will be included when the new feature is enabled. Since the wrapper uses the same driver at all stages, enabling the new feature will also make it necessary to include the SPI chip drivers in bootblock and romstage images. init_default_cbfs_media() can now be common for different platforms, and as such is defined in the library. BUG=none TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197800 Original-Tested-by: Vadim Bendebury <vbendeb@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41 Reviewed-on: http://review.coreboot.org/7932 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-01 21:23:09 +02:00
bootblock-$(CONFIG_COMMON_CBFS_SPI_WRAPPER) += cbfs_spi.c
bootblock-$(CONFIG_GENERIC_GPIO_LIB) += gpio.c
lib: Unify log2() and related functions This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-23 01:26:40 +02:00
bootblock-y += libgcc.c
bootblock-$(CONFIG_GENERIC_UDELAY) += timer.c
bootblock-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
bootblock-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
bootblock-$(CONFIG_I2C_TPM) += delay.c
bootblock-y += memchr.c
bootblock-y += memcmp.c
bootblock-y += mem_pool.c
bootblock-y += region.c
bootblock-y += boot_device.c
bootblock-y += fmap.c
verstage-y += assets.c
verstage-y += prog_loaders.c
verstage-y += prog_ops.c
verstage-y += delay.c
verstage-y += cbfs.c
verstage-y += halt.c
verstage-y += fmap.c
verstage-y += cbfs_boot_props.c
lib: Unify log2() and related functions This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-23 01:26:40 +02:00
verstage-y += libgcc.c
verstage-y += memcmp.c
verstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
verstage-y += region.c
verstage-y += boot_device.c
verstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
verstage-$(CONFIG_COMMON_CBFS_SPI_WRAPPER) += cbfs_spi.c
ifeq ($(MOCK_TPM),1)
libverstage-y += mocked_tlcl.c
else
libverstage-y += tlcl.c
endif
verstage-$(CONFIG_GENERIC_UDELAY) += timer.c
verstage-$(CONFIG_GENERIC_GPIO_LIB) += gpio.c
verstage-y += mem_pool.c
romstage-y += assets.c
romstage-y += prog_loaders.c
romstage-y += prog_ops.c
romstage-y += memchr.c
romstage-y += memcmp.c
$(foreach arch,$(ARCH_SUPPORTED),\
New mechanism to define SRAM/memory map with automatic bounds checking This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-21 00:29:56 +02:00
$(eval rmodules_$(arch)-y += memcmp.c) \
$(eval rmodules_$(arch)-y += rmodule.ld))
romstage-y += fmap.c
romstage-$(CONFIG_I2C_TPM) += delay.c
romstage-y += cbfs.c
romstage-y += cbfs_boot_props.c
Provide a common CBFS wrapper for SPI storage Coreboot has all necessary infrastructure to use the proper SPI flash interface in bootblock for CBFS. This patch creates a common CBFS wrapper which can be enabled on different platforms as required. COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the common CBFS interface and prevents default inclusion of all SPI chip drivers, only explicitly configured ones will be included when the new feature is enabled. Since the wrapper uses the same driver at all stages, enabling the new feature will also make it necessary to include the SPI chip drivers in bootblock and romstage images. init_default_cbfs_media() can now be common for different platforms, and as such is defined in the library. BUG=none TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197800 Original-Tested-by: Vadim Bendebury <vbendeb@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41 Reviewed-on: http://review.coreboot.org/7932 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-01 21:23:09 +02:00
romstage-$(CONFIG_COMMON_CBFS_SPI_WRAPPER) += cbfs_spi.c
romstage-$(CONFIG_COMPRESS_RAMSTAGE) += lzma.c lzmadecode.c
lib: Unify log2() and related functions This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-23 01:26:40 +02:00
romstage-y += libgcc.c
romstage-$(CONFIG_PRIMITIVE_MEMTEST) += primitive_memtest.c
ramstage-$(CONFIG_PRIMITIVE_MEMTEST) += primitive_memtest.c
romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c
romstage-$(CONFIG_GENERIC_GPIO_LIB) += gpio.c
ifeq ($(CONFIG_EARLY_CBMEM_INIT),y)
romstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
romstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
endif
romstage-y += compute_ip_checksum.c
ifeq ($(CONFIG_COMPILER_GCC),y)
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
romstage-$(CONFIG_ARCH_ROMSTAGE_X86_32) += gcc.c
ramstage-$(CONFIG_ARCH_RAMSTAGE_X86_32) += gcc.c
smm-$(CONFIG_ARCH_RAMSTAGE_X86_32) += gcc.c
endif
romstage-$(CONFIG_GENERIC_UDELAY) += timer.c
ramstage-y += assets.c
ramstage-y += prog_loaders.c
ramstage-y += prog_ops.c
ramstage-y += hardwaremain.c
ramstage-y += selfboot.c
ramstage-y += coreboot_table.c
ramstage-y += bootmem.c
ramstage-y += fmap.c
ramstage-y += memchr.c
ramstage-y += memcmp.c
ramstage-y += malloc.c
smm-$(CONFIG_SMM_TSEG) += malloc.c
ramstage-y += delay.c
ramstage-y += fallback_boot.c
ramstage-y += compute_ip_checksum.c
ramstage-y += cbfs.c
ramstage-y += cbfs_boot_props.c
Provide a common CBFS wrapper for SPI storage Coreboot has all necessary infrastructure to use the proper SPI flash interface in bootblock for CBFS. This patch creates a common CBFS wrapper which can be enabled on different platforms as required. COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the common CBFS interface and prevents default inclusion of all SPI chip drivers, only explicitly configured ones will be included when the new feature is enabled. Since the wrapper uses the same driver at all stages, enabling the new feature will also make it necessary to include the SPI chip drivers in bootblock and romstage images. init_default_cbfs_media() can now be common for different platforms, and as such is defined in the library. BUG=none TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197800 Original-Tested-by: Vadim Bendebury <vbendeb@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41 Reviewed-on: http://review.coreboot.org/7932 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-01 21:23:09 +02:00
ramstage-$(CONFIG_COMMON_CBFS_SPI_WRAPPER) += cbfs_spi.c
ramstage-y += lzma.c lzmadecode.c
ramstage-y += stack.c
ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c
ramstage-$(CONFIG_TRACE) += trace.c
ramstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
ramstage-$(CONFIG_COVERAGE) += libgcov.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += edid.c
ramstage-y += memrange.c
ramstage-$(CONFIG_COOP_MULTITASKING) += thread.c
ramstage-$(CONFIG_TIMER_QUEUE) += timer_queue.c
ramstage-$(CONFIG_GENERIC_GPIO_LIB) += gpio.c
ramstage-$(CONFIG_GENERIC_UDELAY) += timer.c
ramstage-y += b64_decode.c
romstage-y += cbmem_common.c
romstage-y += imd_cbmem.c
ramstage-y += cbmem_common.c
ramstage-y += imd_cbmem.c
cbmem: dynamic cbmem support This patch adds a parallel implementation of cbmem that supports dynamic sizing. The original implementation relied on reserving a fixed-size block of memory for adding cbmem entries. In order to allow for more flexibility for adding cbmem allocations the dynamic cbmem infrastructure was developed as an alternative to the fixed block approach. Also, the amount of memory to reserve for cbmem allocations does not need to be known prior to the first allocation. The dynamic cbmem code implements the same API as the existing cbmem code except for cbmem_init() and cbmem_reinit(). The add and find routines behave the same way. The dynamic cbmem infrastructure uses a top down allocator that starts allocating from a board/chipset defined function cbmem_top(). A root pointer lives just below cbmem_top(). In turn that pointer points to the root block which contains the entries for all the large alloctations. The corresponding block for each large allocation falls just below the previous entry. It should be noted that this implementation rounds all allocations up to a 4096 byte granularity. Though a packing allocator could be written for small allocations it was deemed OK to just fragment the memory as there shouldn't be that many small allocations. The result is less code with a tradeoff of some wasted memory. +----------------------+ <- cbmem_top() | +----| root pointer | | | +----------------------+ | | | |--------+ | +--->| root block |-----+ | | +----------------------+ | | | | | | | | | | | | | | alloc N |<----+ | | +----------------------+ | | | | | | | | | \|/ | alloc N + 1 |<-------+ v +----------------------+ In addition to preserving the previous cbmem API, the dynamic cbmem API allows for removing blocks from cbmem. This allows for the boot process to allocate memory that can be discarded after it's been used for performing more complex boot tasks in romstage. In order to plumb this support in there were some issues to work around regarding writing of coreboot tables. There were a few assumptions to how cbmem was layed out which dictated some ifdef guarding and other runtime checks so as not to incorrectly tag the e820 and coreboot memory tables. The example shown below is using dynamic cbmem infrastructure. The reserved memory for cbmem is less than 512KiB. coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000002ffff: RAM 2. 0000000000030000-000000000003ffff: RESERVED 3. 0000000000040000-000000000009ffff: RAM 4. 00000000000a0000-00000000000fffff: RESERVED 5. 0000000000100000-0000000000efffff: RAM 6. 0000000000f00000-0000000000ffffff: RESERVED 7. 0000000001000000-000000007bf80fff: RAM 8. 000000007bf81000-000000007bffffff: CONFIGURATION TABLES 9. 000000007c000000-000000007e9fffff: RESERVED 10. 00000000f0000000-00000000f3ffffff: RESERVED 11. 00000000fed10000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-00000001005fffff: RAM Wrote coreboot table at: 7bf81000, 0x39c bytes, checksum f5bf coreboot table: 948 bytes. CBMEM ROOT 0. 7bfff000 00001000 MRC DATA 1. 7bffe000 00001000 ROMSTAGE 2. 7bffd000 00001000 TIME STAMP 3. 7bffc000 00001000 ROMSTG STCK 4. 7bff7000 00005000 CONSOLE 5. 7bfe7000 00010000 VBOOT 6. 7bfe6000 00001000 RAMSTAGE 7. 7bf98000 0004e000 GDT 8. 7bf97000 00001000 ACPI 9. 7bf8b000 0000c000 ACPI GNVS 10. 7bf8a000 00001000 SMBIOS 11. 7bf89000 00001000 COREBOOT 12. 7bf81000 00008000 And the corresponding e820 entries: BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 BIOS-e820: [mem 0x0000000000001000-0x000000000002ffff] usable BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved BIOS-e820: [mem 0x0000000001000000-0x000000007bf80fff] usable BIOS-e820: [mem 0x000000007bf81000-0x000000007bffffff] type 16 BIOS-e820: [mem 0x000000007c000000-0x000000007e9fffff] reserved BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable Change-Id: Ie3bca52211800a8652a77ca684140cfc9b3b9a6b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2848 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 18:41:44 +01:00
romstage-y += imd.c
ramstage-y += imd.c
ramstage-y += hexdump.c
romstage-y += hexdump.c
romstage-$(CONFIG_REG_SCRIPT) += reg_script.c
ramstage-$(CONFIG_REG_SCRIPT) += reg_script.c
ifeq ($(CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM),y)
ramstage-y += ext_stage_cache.c
romstage-y += ext_stage_cache.c
else
ramstage-$(CONFIG_RELOCATABLE_RAMSTAGE) += cbmem_stage_cache.c
romstage-$(CONFIG_RELOCATABLE_RAMSTAGE) += cbmem_stage_cache.c
endif
romstage-y += mem_pool.c
ramstage-y += mem_pool.c
romstage-y += region.c
ramstage-y += region.c
romstage-y += boot_device.c
ramstage-y += boot_device.c
smm-y += region.c
smm-y += boot_device.c
smm-y += fmap.c
smm-y += cbfs.c memcmp.c
bootblock-y += version.c
romstage-y += version.c
ramstage-y += version.c
smm-y += version.c
secmon-y += version.c
verstage-y += version.c
$(obj)/lib/version.bootblock.o : $(obj)/build.h
$(obj)/lib/version.romstage.o : $(obj)/build.h
$(obj)/lib/version.ramstage.o : $(obj)/build.h
$(obj)/lib/version.smm.o : $(obj)/build.h
$(obj)/lib/version.secmon.o : $(obj)/build.h
$(obj)/lib/version.verstage.o : $(obj)/build.h
romstage-y += bootmode.c
ramstage-y += bootmode.c
bootblock-y += halt.c
romstage-y += halt.c
ramstage-y += halt.c
smm-y += halt.c
secmon-y += halt.c
New mechanism to define SRAM/memory map with automatic bounds checking This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-21 00:29:56 +02:00
ifneq ($(CONFIG_ARCH_X86),y)
# X86 bootblock and romstage use custom ldscripts that are all glued together,
# so we need to exclude it here or it would pick these up as well
bootblock-y += bootblock.ld
romstage-y += romstage.ld
endif
ramstage-y += ramstage.ld
ifeq ($(CONFIG_RELOCATABLE_MODULES),y)
ramstage-y += rmodule.c
romstage-$(CONFIG_RELOCATABLE_RAMSTAGE) += rmodule.c
RMODULE_LDFLAGS := -nostartfiles --gc-sections --emit-relocs -z defs -Bsymbolic
# rmodule_link_rules is a function that should be called with:
# (1) the object name to link
# (2) the dependencies
# (3) heap size of the relocatable module
# (4) arch for which the rmodules are to be linked
# It will create the necessary Make rules to create a rmodule. The resulting
# rmdoule is named $(1).rmod
define rmodule_link
New mechanism to define SRAM/memory map with automatic bounds checking This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-21 00:29:56 +02:00
$(strip $(1)): $(strip $(2)) $$(COMPILER_RT_rmodules_$(4)) $(obj)/lib/rmodule.rmodules_$(4).ld | $$(RMODTOOL)
$$(LD_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(obj)/lib/rmodule.rmodules_$(4).ld --defsym=__heap_size=$(strip $(3)) -o $$@ --whole-archive --start-group $(filter-out %.ld,$(2)) --end-group
$$(NM_rmodules_$(4)) -n $$@ > $$(basename $$@).map
$(strip $(1)).rmod: $(strip $(1))
$$(RMODTOOL) -i $$^ -o $$@
endef
endif