coreboot-kgpe-d16/util/ifdtool/ifdtool.c

2027 lines
55 KiB
C
Raw Normal View History

/* ifdtool - dump Intel Firmware Descriptor information */
util/: Replace GPLv2 boiler plate with SPDX header Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|This[\s*]*program[\s*]*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.*[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*This[\s*#]*program[\s*#]*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.*[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: I1008a63b804f355a916221ac994701d7584f60ff Signed-off-by: Patrick Georgi <pgeorgi@google.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08 20:48:04 +02:00
/* SPDX-License-Identifier: GPL-2.0-only */
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <getopt.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <commonlib/helpers.h>
#include <fmap.h>
#include "ifdtool.h"
#ifndef O_BINARY
#define O_BINARY 0
#endif
/**
* PTR_IN_RANGE - examine whether a pointer falls in [base, base + limit)
* @param ptr: the non-void* pointer to a single arbitrary-sized object.
* @param base: base address represented with char* type.
* @param limit: upper limit of the legal address.
*
*/
#define PTR_IN_RANGE(ptr, base, limit) \
((const char *)(ptr) >= (base) && \
(const char *)&(ptr)[1] <= (base) + (limit))
2015-06-22 20:14:48 +02:00
static int ifd_version;
static int chipset;
static unsigned int max_regions = 0;
static int selected_chip = 0;
static int platform = -1;
2015-06-22 20:14:48 +02:00
static const struct region_name region_names[MAX_REGIONS] = {
{ "Flash Descriptor", "fd", "flashregion_0_flashdescriptor.bin", "SI_DESC" },
{ "BIOS", "bios", "flashregion_1_bios.bin", "SI_BIOS" },
{ "Intel ME", "me", "flashregion_2_intel_me.bin", "SI_ME" },
{ "GbE", "gbe", "flashregion_3_gbe.bin", "SI_GBE" },
{ "Platform Data", "pd", "flashregion_4_platform_data.bin", "SI_PDR" },
{ "Reserved", "res1", "flashregion_5_reserved.bin", NULL },
{ "Reserved", "res2", "flashregion_6_reserved.bin", NULL },
{ "Reserved", "res3", "flashregion_7_reserved.bin", NULL },
{ "EC", "ec", "flashregion_8_ec.bin", "SI_EC" },
};
/* port from flashrom */
static const char *const ich_chipset_names[] = {
"Unknown ICH",
"ICH",
"ICH2345",
"ICH6",
"SCH U",
"Atom E6xx",
"Atom S1220 S1240 S1260",
"ICH7",
"ICH8",
"ICH9",
"ICH10",
"Unknown PCH",
"5 series Ibex Peak",
"6 series Cougar Point",
"7 series Panther Point",
"8 series Lynx Point",
"Baytrail",
"8 series Lynx Point LP",
"8 series Wellsburg",
"9 series Wildcat Point",
"9 series Wildcat Point LP",
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
"Apollo Lake: N3xxx, J3xxx",
"Gemini Lake: N5xxx, J5xxx, N4xxx, J4xxx",
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
"Jasper Lake: N6xxx, N51xx, N45xx",
"Elkhart Lake: x6000 series Atom",
"100/200 series Sunrise Point",
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
"300 series Cannon Point",
"400 series Ice Point",
"500 series Tiger Point/ 600 series Alder Point",
"C620 series Lewisburg",
NULL
};
static fdbar_t *find_fd(char *image, int size)
{
int i, found = 0;
/* Scan for FD signature */
for (i = 0; i < (size - 4); i += 4) {
if (*(uint32_t *) (image + i) == 0x0FF0A55A) {
found = 1;
break; // signature found.
}
}
if (!found) {
printf("No Flash Descriptor found in this image\n");
return NULL;
}
fdbar_t *fdb = (fdbar_t *) (image + i);
return PTR_IN_RANGE(fdb, image, size) ? fdb : NULL;
}
static char *find_flumap(char *image, int size)
{
/* The upper map is located in the word before the 256B-long OEM section
* at the end of the 4kB-long flash descriptor. In the official
* documentation this is defined as FDBAR + 0xEFC. However, starting
* with B-Step of Ibex Peak (5 series) the signature (and thus FDBAR)
* has moved 16 bytes back to offset 0x10 of the image. Although
* official documentation still maintains the offset relative to FDBAR
* this is wrong and a simple fixed offset from the start of the image
* works.
*/
char *flumap = image + 4096 - 256 - 4;
return PTR_IN_RANGE(flumap, image, size) ? flumap : NULL;
}
static fcba_t *find_fcba(char *image, int size)
{
fdbar_t *fdb = find_fd(image, size);
if (!fdb)
return NULL;
fcba_t *fcba = (fcba_t *) (image + ((fdb->flmap0 & 0xff) << 4));
return PTR_IN_RANGE(fcba, image, size) ? fcba : NULL;
}
static fmba_t *find_fmba(char *image, int size)
{
fdbar_t *fdb = find_fd(image, size);
if (!fdb)
return NULL;
fmba_t *fmba = (fmba_t *) (image + ((fdb->flmap1 & 0xff) << 4));
return PTR_IN_RANGE(fmba, image, size) ? fmba : NULL;
}
static frba_t *find_frba(char *image, int size)
{
fdbar_t *fdb = find_fd(image, size);
if (!fdb)
return NULL;
frba_t *frba =
(frba_t *) (image + (((fdb->flmap0 >> 16) & 0xff) << 4));
return PTR_IN_RANGE(frba, image, size) ? frba : NULL;
}
static fpsba_t *find_fpsba(char *image, int size)
{
fdbar_t *fdb = find_fd(image, size);
if (!fdb)
return NULL;
fpsba_t *fpsba =
(fpsba_t *) (image + (((fdb->flmap1 >> 16) & 0xff) << 4));
int SSL = ((fdb->flmap1 >> 24) & 0xff) * sizeof(uint32_t);
if ((((char *)fpsba) + SSL) >= (image + size))
return NULL;
return fpsba;
}
static fmsba_t *find_fmsba(char *image, int size)
{
fdbar_t *fdb = find_fd(image, size);
if (!fdb)
return NULL;
fmsba_t *fmsba = (fmsba_t *) (image + ((fdb->flmap2 & 0xff) << 4));
return PTR_IN_RANGE(fmsba, image, size) ? fmsba : NULL;
}
/* port from flashrom */
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
static enum ich_chipset ifd1_guess_chipset(char *image, int size)
{
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
const fdbar_t *fdb = find_fd(image, size);
if (!fdb)
exit(EXIT_FAILURE);
uint32_t iccriba = (fdb->flmap2 >> 16) & 0xff;
uint32_t msl = (fdb->flmap2 >> 8) & 0xff;
uint32_t isl = (fdb->flmap1 >> 24);
uint32_t nm = (fdb->flmap1 >> 8) & 0x7;
/* Rest for IFD1 chipset type */
if (iccriba == 0x00) {
if (msl == 0 && isl <= 2)
return CHIPSET_ICH8;
else if (isl <= 2)
return CHIPSET_ICH9;
else if (isl <= 10)
return CHIPSET_ICH10;
else if (isl <= 16)
return CHIPSET_5_SERIES_IBEX_PEAK;
else if (isl == 0x13)
return CHIPSET_N_J_SERIES_APOLLO_LAKE;
printf("Peculiar firmware descriptor, assuming Ibex Peak compatibility.\n");
return CHIPSET_5_SERIES_IBEX_PEAK;
} else if (iccriba < 0x31 && (fdb->flmap2 & 0xff) < 0x30) {
if (msl == 0 && isl <= 17)
return CHIPSET_BAYTRAIL;
else if (msl <= 1 && isl <= 18)
return CHIPSET_6_SERIES_COUGAR_POINT;
else if (msl <= 1 && isl <= 21)
return CHIPSET_8_SERIES_LYNX_POINT;
printf("Peculiar firmware descriptor, assuming Wildcat Point compatibility.\n");
return CHIPSET_9_SERIES_WILDCAT_POINT;
} else if (nm == 6) {
return CHIPSET_C620_SERIES_LEWISBURG;
} else {
return CHIPSET_100_200_SERIES_SUNRISE_POINT;
}
}
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
static enum ich_chipset ifd2_platform_to_chipset(const int pindex)
{
switch (pindex) {
case PLATFORM_GLK:
return CHIPSET_N_J_SERIES_GEMINI_LAKE;
case PLATFORM_JSL:
return CHIPSET_N_SERIES_JASPER_LAKE;
case PLATFORM_EHL:
return CHIPSET_x6000_SERIES_ELKHART_LAKE;
case PLATFORM_CNL:
return CHIPSET_300_SERIES_CANNON_POINT;
case PLATFORM_TGL:
case PLATFORM_ADL:
return CHIPSET_500_600_SERIES_TIGER_ALDER_POINT;
case PLATFORM_ICL:
return CHIPSET_400_SERIES_ICE_POINT;
default:
return CHIPSET_PCH_UNKNOWN;
}
}
/*
* Some newer platforms have re-defined the FCBA field that was used to
* distinguish IFD v1 v/s v2. Define a list of platforms that we know do not
* have the required FCBA field, but are IFD v2 and return true if current
* platform is one of them.
*/
static int is_platform_ifd_2(void)
{
static const int ifd_2_platforms[] = {
PLATFORM_GLK,
PLATFORM_CNL,
PLATFORM_ICL,
PLATFORM_TGL,
PLATFORM_JSL,
PLATFORM_EHL,
PLATFORM_ADL,
};
unsigned int i;
for (i = 0; i < ARRAY_SIZE(ifd_2_platforms); i++) {
if (platform == ifd_2_platforms[i])
return 1;
}
return 0;
}
static void check_ifd_version(char *image, int size)
{
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
if (is_platform_ifd_2()) {
ifd_version = IFD_VERSION_2;
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
chipset = ifd2_platform_to_chipset(platform);
max_regions = MAX_REGIONS;
util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10 19:32:29 +02:00
} else {
ifd_version = IFD_VERSION_1;
chipset = ifd1_guess_chipset(image, size);
max_regions = MAX_REGIONS_OLD;
}
}
static region_t get_region(const frba_t *frba, unsigned int region_type)
{
int base_mask;
int limit_mask;
uint32_t flreg;
region_t region;
if (ifd_version >= IFD_VERSION_2)
base_mask = 0x7fff;
else
base_mask = 0xfff;
limit_mask = base_mask << 16;
if (region_type >= max_regions) {
fprintf(stderr, "Invalid region type %d.\n", region_type);
exit (EXIT_FAILURE);
}
flreg = frba->flreg[region_type];
region.base = (flreg & base_mask) << 12;
region.limit = ((flreg & limit_mask) >> 4) | 0xfff;
region.size = region.limit - region.base + 1;
if (region.size < 0)
region.size = 0;
return region;
}
static void set_region(frba_t *frba, unsigned int region_type,
const region_t *region)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
{
if (region_type >= max_regions) {
fprintf(stderr, "Invalid region type %u.\n", region_type);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
exit (EXIT_FAILURE);
}
frba->flreg[region_type] =
(((region->limit >> 12) & 0x7fff) << 16) |
((region->base >> 12) & 0x7fff);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
}
static const char *region_name(unsigned int region_type)
{
if (region_type >= max_regions) {
fprintf(stderr, "Invalid region type.\n");
exit (EXIT_FAILURE);
}
return region_names[region_type].pretty;
}
static const char *region_name_short(unsigned int region_type)
{
if (region_type >= max_regions) {
fprintf(stderr, "Invalid region type.\n");
exit (EXIT_FAILURE);
}
return region_names[region_type].terse;
}
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
static int region_num(const char *name)
{
unsigned int i;
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
for (i = 0; i < max_regions; i++) {
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
if (strcasecmp(name, region_names[i].pretty) == 0)
return i;
if (strcasecmp(name, region_names[i].terse) == 0)
return i;
}
return -1;
}
static const char *region_filename(unsigned int region_type)
{
if (region_type >= max_regions) {
2015-06-22 20:14:48 +02:00
fprintf(stderr, "Invalid region type %d.\n", region_type);
exit (EXIT_FAILURE);
}
return region_names[region_type].filename;
}
static void dump_region(unsigned int num, const frba_t *frba)
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
{
region_t region = get_region(frba, num);
printf(" Flash Region %d (%s): %08x - %08x %s\n",
num, region_name(num), region.base, region.limit,
region.size < 1 ? "(unused)" : "");
}
static void dump_region_layout(char *buf, size_t bufsize, unsigned int num,
const frba_t *frba)
{
region_t region = get_region(frba, num);
snprintf(buf, bufsize, "%08x:%08x %s\n",
region.base, region.limit, region_name_short(num));
}
static void dump_frba(const frba_t *frba)
{
unsigned int i;
util/ifdtool: Skip unused and reserved Flash Region This patch ensures all unused and reserved flash region sections are not getting listed while using -d option to dump FD. BUG=b:153888802 TEST=List only used flash region section with below command > ifdtool -p tgl -d coreboot.rom Without this CL : Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x1fff0400 Flash Region 1 (BIOS): 00400000 - 01ffffff FLREG2: 0x03ff0001 Flash Region 2 (Intel ME): 00001000 - 003fffff FLREG3: 0x00007fff Flash Region 3 (GbE): 07fff000 - 00000fff (unused) FLREG4: 0x00007fff Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused) FLREG5: 0x00007fff Flash Region 5 (Reserved): 07fff000 - 00000fff (unused) FLREG6: 0x00007fff Flash Region 6 (Reserved): 07fff000 - 00000fff (unused) FLREG7: 0x00007fff Flash Region 7 (Reserved): 07fff000 - 00000fff (unused) FLREG8: 0x00007fff Flash Region 8 (EC): 07fff000 - 00000fff (unused) With this CL : Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x1fff0400 Flash Region 1 (BIOS): 00400000 - 01ffffff FLREG2: 0x03ff0001 Flash Region 2 (Intel ME): 00001000 - 003fffff FLREG3: 0x00007fff Flash Region 3 (GbE): 07fff000 - 00000fff (unused) FLREG4: 0x00007fff Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused) FLREG8: 0x00007fff Flash Region 8 (EC): 07fff000 - 00000fff (unused) Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I900a29d8968bd61d66c04012e60e1ba4baff786d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-26 10:32:01 +02:00
region_t region;
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
printf("Found Region Section\n");
for (i = 0; i < max_regions; i++) {
util/ifdtool: Skip unused and reserved Flash Region This patch ensures all unused and reserved flash region sections are not getting listed while using -d option to dump FD. BUG=b:153888802 TEST=List only used flash region section with below command > ifdtool -p tgl -d coreboot.rom Without this CL : Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x1fff0400 Flash Region 1 (BIOS): 00400000 - 01ffffff FLREG2: 0x03ff0001 Flash Region 2 (Intel ME): 00001000 - 003fffff FLREG3: 0x00007fff Flash Region 3 (GbE): 07fff000 - 00000fff (unused) FLREG4: 0x00007fff Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused) FLREG5: 0x00007fff Flash Region 5 (Reserved): 07fff000 - 00000fff (unused) FLREG6: 0x00007fff Flash Region 6 (Reserved): 07fff000 - 00000fff (unused) FLREG7: 0x00007fff Flash Region 7 (Reserved): 07fff000 - 00000fff (unused) FLREG8: 0x00007fff Flash Region 8 (EC): 07fff000 - 00000fff (unused) With this CL : Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x1fff0400 Flash Region 1 (BIOS): 00400000 - 01ffffff FLREG2: 0x03ff0001 Flash Region 2 (Intel ME): 00001000 - 003fffff FLREG3: 0x00007fff Flash Region 3 (GbE): 07fff000 - 00000fff (unused) FLREG4: 0x00007fff Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused) FLREG8: 0x00007fff Flash Region 8 (EC): 07fff000 - 00000fff (unused) Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I900a29d8968bd61d66c04012e60e1ba4baff786d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-26 10:32:01 +02:00
region = get_region(frba, i);
/* Skip unused & reserved Flash Region */
if (region.size < 1 && !strcmp(region_name(i), "Reserved"))
continue;
printf("FLREG%u: 0x%08x\n", i, frba->flreg[i]);
dump_region(i, frba);
2015-06-22 20:14:48 +02:00
}
}
static void dump_frba_layout(const frba_t *frba, const char *layout_fname)
{
char buf[LAYOUT_LINELEN];
size_t bufsize = LAYOUT_LINELEN;
unsigned int i;
int layout_fd = open(layout_fname, O_WRONLY | O_CREAT | O_TRUNC,
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
if (layout_fd == -1) {
perror("Could not open file");
exit(EXIT_FAILURE);
}
for (i = 0; i < max_regions; i++) {
region_t region = get_region(frba, i);
/* is region invalid? */
if (region.size < 1)
continue;
dump_region_layout(buf, bufsize, i, frba);
if (write(layout_fd, buf, strlen(buf)) < 0) {
perror("Could not write to file");
exit(EXIT_FAILURE);
}
}
close(layout_fd);
printf("Wrote layout to %s\n", layout_fname);
}
static void _decode_spi_frequency(unsigned int freq)
{
switch (freq) {
case SPI_FREQUENCY_20MHZ:
printf("20MHz");
break;
case SPI_FREQUENCY_33MHZ:
printf("33MHz");
break;
2015-06-22 20:14:48 +02:00
case SPI_FREQUENCY_48MHZ:
printf("48MHz");
break;
case SPI_FREQUENCY_50MHZ_30MHZ:
switch (ifd_version) {
case IFD_VERSION_1:
printf("50MHz");
break;
case IFD_VERSION_2:
printf("30MHz");
break;
}
break;
case SPI_FREQUENCY_17MHZ:
printf("17MHz");
break;
default:
printf("unknown<%x>MHz", freq);
}
}
static void _decode_spi_frequency_500_series(unsigned int freq)
{
switch (freq) {
case SPI_FREQUENCY_100MHZ:
printf("100MHz");
break;
case SPI_FREQUENCY_50MHZ:
printf("50MHz");
break;
case SPI_FREQUENCY_500SERIES_33MHZ:
printf("33MHz");
break;
case SPI_FREQUENCY_25MHZ:
printf("25MHz");
break;
case SPI_FREQUENCY_14MHZ:
printf("14MHz");
break;
default:
printf("unknown<%x>MHz", freq);
}
}
static void decode_spi_frequency(unsigned int freq)
{
if (chipset == CHIPSET_500_600_SERIES_TIGER_ALDER_POINT)
_decode_spi_frequency_500_series(freq);
else
_decode_spi_frequency(freq);
}
static void _decode_espi_frequency(unsigned int freq)
{
switch (freq) {
case ESPI_FREQUENCY_20MHZ:
printf("20MHz");
break;
case ESPI_FREQUENCY_24MHZ:
printf("24MHz");
break;
case ESPI_FREQUENCY_30MHZ:
printf("30MHz");
break;
case ESPI_FREQUENCY_48MHZ:
printf("48MHz");
break;
case ESPI_FREQUENCY_60MHZ:
printf("60MHz");
break;
case ESPI_FREQUENCY_17MHZ:
printf("17MHz");
break;
default:
printf("unknown<%x>MHz", freq);
}
}
static void _decode_espi_frequency_500_series(unsigned int freq)
{
switch (freq) {
case ESPI_FREQUENCY_500SERIES_20MHZ:
printf("20MHz");
break;
case ESPI_FREQUENCY_500SERIES_24MHZ:
printf("24MHz");
break;
case ESPI_FREQUENCY_500SERIES_25MHZ:
printf("25MHz");
break;
case ESPI_FREQUENCY_500SERIES_48MHZ:
printf("48MHz");
break;
case ESPI_FREQUENCY_500SERIES_60MHZ:
printf("60MHz");
break;
default:
printf("unknown<%x>MHz", freq);
}
}
static void decode_espi_frequency(unsigned int freq)
{
if (chipset == CHIPSET_500_600_SERIES_TIGER_ALDER_POINT)
_decode_espi_frequency_500_series(freq);
else
_decode_espi_frequency(freq);
}
static void decode_component_density(unsigned int density)
{
switch (density) {
case COMPONENT_DENSITY_512KB:
printf("512KB");
break;
case COMPONENT_DENSITY_1MB:
printf("1MB");
break;
case COMPONENT_DENSITY_2MB:
printf("2MB");
break;
case COMPONENT_DENSITY_4MB:
printf("4MB");
break;
case COMPONENT_DENSITY_8MB:
printf("8MB");
break;
case COMPONENT_DENSITY_16MB:
printf("16MB");
break;
2015-06-22 20:14:48 +02:00
case COMPONENT_DENSITY_32MB:
printf("32MB");
break;
case COMPONENT_DENSITY_64MB:
printf("64MB");
break;
case COMPONENT_DENSITY_UNUSED:
printf("UNUSED");
break;
default:
printf("unknown<%x>MB", density);
}
}
static int is_platform_with_pch(void)
{
if (chipset >= CHIPSET_5_SERIES_IBEX_PEAK)
return 1;
return 0;
}
/* FLMAP0 register bit 24 onwards are reserved from SPT PCH */
static int is_platform_with_100x_series_pch(void)
{
if (chipset >= CHIPSET_100_200_SERIES_SUNRISE_POINT &&
chipset <= CHIPSET_500_600_SERIES_TIGER_ALDER_POINT)
return 1;
return 0;
}
static void dump_fcba(const fcba_t *fcba, const fpsba_t *fpsba)
{
unsigned int freq;
printf("\nFound Component Section\n");
printf("FLCOMP 0x%08x\n", fcba->flcomp);
printf(" Dual Output Fast Read Support: %ssupported\n",
(fcba->flcomp & (1 << 30))?"":"not ");
printf(" Read ID/Read Status Clock Frequency: ");
decode_spi_frequency((fcba->flcomp >> 27) & 7);
printf("\n Write/Erase Clock Frequency: ");
decode_spi_frequency((fcba->flcomp >> 24) & 7);
printf("\n Fast Read Clock Frequency: ");
decode_spi_frequency((fcba->flcomp >> 21) & 7);
printf("\n Fast Read Support: %ssupported",
(fcba->flcomp & (1 << 20))?"":"not ");
if (is_platform_with_100x_series_pch() &&
chipset != CHIPSET_100_200_SERIES_SUNRISE_POINT) {
printf("\n Read eSPI/EC Bus Frequency: ");
if (chipset == CHIPSET_500_600_SERIES_TIGER_ALDER_POINT)
freq = (fpsba->pchstrp[22] & 0x38) >> 3;
else
freq = (fcba->flcomp >> 17) & 7;
decode_espi_frequency(freq);
} else {
printf("\n Read Clock Frequency: ");
decode_spi_frequency((fcba->flcomp >> 17) & 7);
}
2015-06-22 20:14:48 +02:00
switch (ifd_version) {
case IFD_VERSION_1:
printf("\n Component 2 Density: ");
decode_component_density((fcba->flcomp >> 3) & 7);
printf("\n Component 1 Density: ");
decode_component_density(fcba->flcomp & 7);
break;
case IFD_VERSION_2:
printf("\n Component 2 Density: ");
decode_component_density((fcba->flcomp >> 4) & 0xf);
printf("\n Component 1 Density: ");
decode_component_density(fcba->flcomp & 0xf);
break;
}
printf("\n");
printf("FLILL 0x%08x\n", fcba->flill);
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
printf(" Invalid Instruction 3: 0x%02x\n",
(fcba->flill >> 24) & 0xff);
printf(" Invalid Instruction 2: 0x%02x\n",
(fcba->flill >> 16) & 0xff);
printf(" Invalid Instruction 1: 0x%02x\n",
(fcba->flill >> 8) & 0xff);
printf(" Invalid Instruction 0: 0x%02x\n",
fcba->flill & 0xff);
if (is_platform_with_100x_series_pch()) {
printf("FLILL1 0x%08x\n", fcba->flpb);
printf(" Invalid Instruction 7: 0x%02x\n",
(fcba->flpb >> 24) & 0xff);
printf(" Invalid Instruction 6: 0x%02x\n",
(fcba->flpb >> 16) & 0xff);
printf(" Invalid Instruction 5: 0x%02x\n",
(fcba->flpb >> 8) & 0xff);
printf(" Invalid Instruction 4: 0x%02x\n",
fcba->flpb & 0xff);
} else {
printf("FLPB 0x%08x\n", fcba->flpb);
printf(" Flash Partition Boundary Address: 0x%06x\n\n",
(fcba->flpb & 0xfff) << 12);
}
}
static void dump_fpsba(const fdbar_t *fdb, const fpsba_t *fpsba)
{
unsigned int i;
/* SoC Strap Length, aka PSL, aka ISL */
unsigned int SSL = ((fdb->flmap1 >> 24) & 0xff) * sizeof(uint32_t);
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf("Found PCH Strap Section\n");
for (i = 0; i < SSL; i++)
printf("PCHSTRP%-3u: 0x%08x\n", i, fpsba->pchstrp[i]);
if (ifd_version >= IFD_VERSION_2) {
printf("HAP bit is %sset\n",
fpsba->pchstrp[0] & (1 << 16) ? "" : "not ");
} else if (chipset >= CHIPSET_ICH8
&& chipset <= CHIPSET_ICH10) {
printf("ICH_MeDisable bit is %sset\n",
fpsba->pchstrp[0] & 1 ? "" : "not ");
} else {
printf("AltMeDisable bit is %sset\n",
fpsba->pchstrp[10] & (1 << 7) ? "" : "not ");
}
printf("\n");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
}
static void decode_flmstr(uint32_t flmstr)
{
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
int wr_shift, rd_shift;
if (ifd_version >= IFD_VERSION_2) {
wr_shift = FLMSTR_WR_SHIFT_V2;
rd_shift = FLMSTR_RD_SHIFT_V2;
} else {
wr_shift = FLMSTR_WR_SHIFT_V1;
rd_shift = FLMSTR_RD_SHIFT_V1;
}
/* EC region access only available on v2+ */
2015-06-22 20:14:48 +02:00
if (ifd_version >= IFD_VERSION_2)
printf(" EC Region Write Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (wr_shift + 8))) ?
"enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Platform Data Region Write Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (wr_shift + 4))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" GbE Region Write Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (wr_shift + 3))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Intel ME Region Write Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (wr_shift + 2))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Host CPU/BIOS Region Write Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (wr_shift + 1))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Flash Descriptor Write Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << wr_shift)) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
2015-06-22 20:14:48 +02:00
if (ifd_version >= IFD_VERSION_2)
printf(" EC Region Read Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (rd_shift + 8))) ?
"enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Platform Data Region Read Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (rd_shift + 4))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" GbE Region Read Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (rd_shift + 3))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Intel ME Region Read Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (rd_shift + 2))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Host CPU/BIOS Region Read Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << (rd_shift + 1))) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf(" Flash Descriptor Read Access: %s\n",
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
(flmstr & (1 << rd_shift)) ? "enabled" : "disabled");
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
/* Requestor ID doesn't exist for ifd 2 */
if (ifd_version < IFD_VERSION_2)
printf(" Requester ID: 0x%04x\n\n",
flmstr & 0xffff);
}
static void dump_fmba(const fmba_t *fmba)
{
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf("Found Master Section\n");
printf("FLMSTR1: 0x%08x (Host CPU/BIOS)\n", fmba->flmstr1);
decode_flmstr(fmba->flmstr1);
printf("FLMSTR2: 0x%08x (Intel ME)\n", fmba->flmstr2);
decode_flmstr(fmba->flmstr2);
printf("FLMSTR3: 0x%08x (GbE)\n", fmba->flmstr3);
decode_flmstr(fmba->flmstr3);
2015-06-22 20:14:48 +02:00
if (ifd_version >= IFD_VERSION_2) {
printf("FLMSTR5: 0x%08x (EC)\n", fmba->flmstr5);
decode_flmstr(fmba->flmstr5);
}
}
static void dump_fmsba(const fmsba_t *fmsba)
{
unsigned int i;
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
printf("Found Processor Strap Section\n");
for (i = 0; i < ARRAY_SIZE(fmsba->data); i++)
printf("????: 0x%08x\n", fmsba->data[i]);
if (chipset >= CHIPSET_ICH8 && chipset <= CHIPSET_ICH10) {
printf("MCH_MeDisable bit is %sset\n",
fmsba->data[0] & 1 ? "" : "not ");
printf("MCH_AltMeDisable bit is %sset\n",
fmsba->data[0] & (1 << 7) ? "" : "not ");
}
}
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
static void dump_jid(uint32_t jid)
{
printf(" SPI Component Vendor ID: 0x%02x\n",
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
jid & 0xff);
printf(" SPI Component Device ID 0: 0x%02x\n",
(jid >> 8) & 0xff);
printf(" SPI Component Device ID 1: 0x%02x\n",
(jid >> 16) & 0xff);
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
}
static void dump_vscc(uint32_t vscc)
{
printf(" Lower Erase Opcode: 0x%02x\n",
vscc >> 24);
printf(" Lower Write Enable on Write Status: 0x%02x\n",
vscc & (1 << 20) ? 0x06 : 0x50);
printf(" Lower Write Status Required: %s\n",
vscc & (1 << 19) ? "Yes" : "No");
printf(" Lower Write Granularity: %d bytes\n",
vscc & (1 << 18) ? 64 : 1);
printf(" Lower Block / Sector Erase Size: ");
switch ((vscc >> 16) & 0x3) {
case 0:
printf("256 Byte\n");
break;
case 1:
printf("4KB\n");
break;
case 2:
printf("8KB\n");
break;
case 3:
printf("64KB\n");
break;
}
printf(" Upper Erase Opcode: 0x%02x\n",
(vscc >> 8) & 0xff);
printf(" Upper Write Enable on Write Status: 0x%02x\n",
vscc & (1 << 4) ? 0x06 : 0x50);
printf(" Upper Write Status Required: %s\n",
vscc & (1 << 3) ? "Yes" : "No");
printf(" Upper Write Granularity: %d bytes\n",
vscc & (1 << 2) ? 64 : 1);
printf(" Upper Block / Sector Erase Size: ");
switch (vscc & 0x3) {
case 0:
printf("256 Byte\n");
break;
case 1:
printf("4KB\n");
break;
case 2:
printf("8KB\n");
break;
case 3:
printf("64KB\n");
break;
}
}
static void dump_vtba(const vtba_t *vtba, int vtl)
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
{
int i;
int max_len = sizeof(vtba_t)/sizeof(vscc_t);
int num = (vtl >> 1) < max_len ? (vtl >> 1) : max_len;
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
printf("ME VSCC table:\n");
for (i = 0; i < num; i++) {
printf(" JID%d: 0x%08x\n", i, vtba->entry[i].jid);
dump_jid(vtba->entry[i].jid);
printf(" VSCC%d: 0x%08x\n", i, vtba->entry[i].vscc);
dump_vscc(vtba->entry[i].vscc);
}
printf("\n");
}
static void dump_oem(const uint8_t *oem)
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
{
int i, j;
printf("OEM Section:\n");
for (i = 0; i < 4; i++) {
printf("%02x:", i << 4);
for (j = 0; j < 16; j++)
printf(" %02x", oem[(i<<4)+j]);
printf ("\n");
}
printf ("\n");
}
static void dump_fd(char *image, int size)
{
const fdbar_t *fdb = find_fd(image, size);
if (!fdb)
exit(EXIT_FAILURE);
printf("%s", is_platform_with_pch() ? "PCH" : "ICH");
printf(" Revision: %s\n", ich_chipset_names[chipset]);
printf("FLMAP0: 0x%08x\n", fdb->flmap0);
if (!is_platform_with_100x_series_pch())
printf(" NR: %d\n", (fdb->flmap0 >> 24) & 7);
printf(" FRBA: 0x%x\n", ((fdb->flmap0 >> 16) & 0xff) << 4);
printf(" NC: %d\n", ((fdb->flmap0 >> 8) & 3) + 1);
printf(" FCBA: 0x%x\n", ((fdb->flmap0) & 0xff) << 4);
printf("FLMAP1: 0x%08x\n", fdb->flmap1);
printf(" %s: ", is_platform_with_100x_series_pch() ? "PSL" : "ISL");
printf("0x%02x\n", (fdb->flmap1 >> 24) & 0xff);
printf(" FPSBA: 0x%x\n", ((fdb->flmap1 >> 16) & 0xff) << 4);
printf(" NM: %d\n", (fdb->flmap1 >> 8) & 3);
printf(" FMBA: 0x%x\n", ((fdb->flmap1) & 0xff) << 4);
if (!is_platform_with_100x_series_pch()) {
printf("FLMAP2: 0x%08x\n", fdb->flmap2);
printf(" PSL: 0x%04x\n", (fdb->flmap2 >> 8) & 0xffff);
printf(" FMSBA: 0x%x\n", ((fdb->flmap2) & 0xff) << 4);
}
if (chipset == CHIPSET_500_600_SERIES_TIGER_ALDER_POINT) {
printf("FLMAP3: 0x%08x\n", fdb->flmap3);
printf(" Minor Revision ID: 0x%04x\n", (fdb->flmap3 >> 14) & 0x7f);
printf(" Major Revision ID: 0x%04x\n", (fdb->flmap3 >> 21) & 0x7ff);
}
char *flumap = find_flumap(image, size);
uint32_t flumap1 = *(uint32_t *)flumap;
printf("FLUMAP1: 0x%08x\n", flumap1);
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
printf(" Intel ME VSCC Table Length (VTL): %d\n",
(flumap1 >> 8) & 0xff);
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
printf(" Intel ME VSCC Table Base Address (VTBA): 0x%06x\n\n",
(flumap1 & 0xff) << 4);
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
dump_vtba((vtba_t *)
(image + ((flumap1 & 0xff) << 4)),
(flumap1 >> 8) & 0xff);
dump_oem((const uint8_t *)image + 0xf00);
const frba_t *frba = find_frba(image, size);
const fcba_t *fcba = find_fcba(image, size);
const fpsba_t *fpsba = find_fpsba(image, size);
const fmba_t *fmba = find_fmba(image, size);
const fmsba_t *fmsba = find_fmsba(image, size);
if (frba && fcba && fpsba && fmba && fmsba) {
dump_frba(frba);
dump_fcba(fcba, fpsba);
dump_fpsba(fdb, fpsba);
dump_fmba(fmba);
dump_fmsba(fmsba);
} else {
printf("FD is corrupted!\n");
}
}
static void dump_layout(char *image, int size, const char *layout_fname)
{
const frba_t *frba = find_frba(image, size);
if (!frba)
exit(EXIT_FAILURE);
dump_frba_layout(frba, layout_fname);
}
static void write_regions(char *image, int size)
{
unsigned int i;
const frba_t *frba = find_frba(image, size);
if (!frba)
exit(EXIT_FAILURE);
2015-06-22 20:14:48 +02:00
for (i = 0; i < max_regions; i++) {
region_t region = get_region(frba, i);
ifdtool: Dump more registers from FD Only thing not decoded now are the PCH straps ifdtool -d path/to/image.bin File path/to/image.bin is 4096 bytes Found Flash Descriptor signature at 0x00000010 FLMAP0: 0x02040003 NR: 2 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x12100206 ISL: 0x12 FPSBA: 0x100 NM: 2 FMBA: 0x60 FLMAP2: 0x00210120 PSL: 0x2101 FMSBA: 0x200 FLUMAP1: 0x000004df Intel ME VSCC Table Length (VTL): 4 Intel ME VSCC Table Base Address (VTBA): 0x000df0 ME VSCC table: JID0: 0x001740ef SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x40 SPI Componend Vendor ID: 0xef VSCC0: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB JID1: 0x001720c2 SPI Componend Device ID 1: 0x17 SPI Componend Device ID 0: 0x20 SPI Componend Vendor ID: 0xc2 VSCC1: 0x20052005 Lower Erase Opcode: 0x20 Lower Write Enable on Write Status: 0x50 Lower Write Status Required: No Lower Write Granularity: 64 bytes Lower Block / Sector Erase Size: 4KB Upper Erase Opcode: 0x20 Upper Write Enable on Write Status: 0x50 Upper Write Status Required: No Upper Write Granularity: 64 bytes Upper Block / Sector Erase Size: 4KB OEM Section: 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x07ff0180 Flash Region 1 (BIOS): 00180000 - 007fffff FLREG2: 0x017f0001 Flash Region 2 (Intel ME): 00001000 - 0017ffff FLREG3: 0x00001fff Flash Region 3 (GbE): 00fff000 - 00000fff (unused) FLREG4: 0x00001fff Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) Found Component Section FLCOMP 0x64900024 Dual Output Fast Read Support: supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Component 2 Density: 8MB Component 1 Density: 8MB FLILL 0x000060c7 Invalid Instruction 3: 0x00 Invalid Instruction 2: 0x00 Invalid Instruction 1: 0x60 Invalid Instruction 0: 0xc7 FLPB 0x00000000 Flash Partition Boundary Address: 0x000000 Found PCH Strap Section PCHSTRP0: 0x0820d602 PCHSTRP1: 0x0000010f PCHSTRP2: 0x00560000 PCHSTRP3: 0x00000000 PCHSTRP4: 0x00c8e000 PCHSTRP5: 0x00000000 PCHSTRP6: 0x00000000 PCHSTRP7: 0xc0001ae0 PCHSTRP8: 0x00000000 PCHSTRP9: 0x30000580 PCHSTRP10: 0x00410044 PCHSTRP11: 0x99000097 PCHSTRP12: 0x00000000 PCHSTRP13: 0x00000000 PCHSTRP14: 0x00000000 PCHSTRP15: 0x0000033e PCHSTRP16: 0x00000000 PCHSTRP17: 0x00000002 Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Found Processor Strap Section ????: 0x00000000 ????: 0xffffffff ????: 0xffffffff ????: 0xffffffff Change-Id: I68a613df2fd80e097cdea46fbad104d7c73ac9ad Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1756 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-27 21:42:15 +02:00
dump_region(i, frba);
if (region.size > 0) {
int region_fd;
region_fd = open(region_filename(i),
O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
if (region_fd < 0) {
perror("Error while trying to open file");
exit(EXIT_FAILURE);
}
if (write(region_fd, image + region.base, region.size) != region.size)
perror("Error while writing");
close(region_fd);
}
}
}
static void validate_layout(char *image, int size)
{
uint i, errors = 0;
struct fmap *fmap;
long int fmap_loc = fmap_find((uint8_t *)image, size);
const frba_t *frba = find_frba(image, size);
if (fmap_loc < 0 || !frba)
exit(EXIT_FAILURE);
fmap = (struct fmap *)(image + fmap_loc);
for (i = 0; i < max_regions; i++) {
if (region_names[i].fmapname == NULL)
continue;
region_t region = get_region(frba, i);
if (region.size == 0)
continue;
const struct fmap_area *area =
fmap_find_area(fmap, region_names[i].fmapname);
if (!area)
continue;
if ((uint)region.base != area->offset ||
(uint)region.size != area->size) {
printf("Region mismatch between %s and %s\n",
region_names[i].terse, area->name);
printf(" Descriptor region %s:\n", region_names[i].terse);
printf(" offset: 0x%08x\n", region.base);
printf(" length: 0x%08x\n", region.size);
printf(" FMAP area %s:\n", area->name);
printf(" offset: 0x%08x\n", area->offset);
printf(" length: 0x%08x\n", area->size);
errors++;
}
}
if (errors > 0)
exit(EXIT_FAILURE);
}
static void write_image(const char *filename, char *image, int size)
{
int new_fd;
printf("Writing new image to %s\n", filename);
// Now write out new image
new_fd = open(filename,
O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
if (new_fd < 0) {
perror("Error while trying to open file");
exit(EXIT_FAILURE);
}
if (write(new_fd, image, size) != size)
perror("Error while writing");
close(new_fd);
}
static void set_spi_frequency(const char *filename, char *image, int size,
enum spi_frequency freq)
{
fcba_t *fcba = find_fcba(image, size);
if (!fcba)
exit(EXIT_FAILURE);
/* clear bits 21-29 */
fcba->flcomp &= ~0x3fe00000;
/* Read ID and Read Status Clock Frequency */
fcba->flcomp |= freq << 27;
/* Write and Erase Clock Frequency */
fcba->flcomp |= freq << 24;
/* Fast Read Clock Frequency */
fcba->flcomp |= freq << 21;
write_image(filename, image, size);
}
static void set_em100_mode(const char *filename, char *image, int size)
{
fcba_t *fcba = find_fcba(image, size);
if (!fcba)
exit(EXIT_FAILURE);
2015-06-22 20:14:48 +02:00
int freq;
switch (ifd_version) {
case IFD_VERSION_1:
freq = SPI_FREQUENCY_20MHZ;
break;
case IFD_VERSION_2:
freq = SPI_FREQUENCY_17MHZ;
break;
default:
freq = SPI_FREQUENCY_17MHZ;
break;
2015-06-22 20:14:48 +02:00
}
fcba->flcomp &= ~(1 << 30);
2015-06-22 20:14:48 +02:00
set_spi_frequency(filename, image, size, freq);
}
static void set_chipdensity(const char *filename, char *image, int size,
unsigned int density)
{
fcba_t *fcba = find_fcba(image, size);
uint8_t mask, chip2_offset;
if (!fcba)
exit(EXIT_FAILURE);
printf("Setting chip density to ");
decode_component_density(density);
printf("\n");
switch (ifd_version) {
case IFD_VERSION_1:
/* fail if selected density is not supported by this version */
if ( (density == COMPONENT_DENSITY_32MB) ||
(density == COMPONENT_DENSITY_64MB) ||
(density == COMPONENT_DENSITY_UNUSED) ) {
printf("error: Selected density not supported in IFD version 1.\n");
exit(EXIT_FAILURE);
}
mask = 0x7;
chip2_offset = 3;
break;
case IFD_VERSION_2:
mask = 0xf;
chip2_offset = 4;
break;
default:
printf("error: Unknown IFD version\n");
exit(EXIT_FAILURE);
break;
}
/* clear chip density for corresponding chip */
switch (selected_chip) {
case 1:
fcba->flcomp &= ~mask;
break;
case 2:
fcba->flcomp &= ~(mask << chip2_offset);
break;
default: /*both chips*/
fcba->flcomp &= ~(mask | (mask << chip2_offset));
break;
}
/* set the new density */
if (selected_chip == 1 || selected_chip == 0)
fcba->flcomp |= (density); /* first chip */
if (selected_chip == 2 || selected_chip == 0)
fcba->flcomp |= (density << chip2_offset); /* second chip */
write_image(filename, image, size);
}
static int check_region(const frba_t *frba, unsigned int region_type)
{
region_t region;
if (!frba)
return 0;
region = get_region(frba, region_type);
return !!((region.base < region.limit) && (region.size > 0));
}
static void lock_descriptor(const char *filename, char *image, int size)
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
{
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
int wr_shift, rd_shift;
fmba_t *fmba = find_fmba(image, size);
const frba_t *frba = find_frba(image, size);
if (!fmba)
exit(EXIT_FAILURE);
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
if (ifd_version >= IFD_VERSION_2) {
wr_shift = FLMSTR_WR_SHIFT_V2;
rd_shift = FLMSTR_RD_SHIFT_V2;
/* Clear non-reserved bits */
fmba->flmstr1 &= 0xff;
fmba->flmstr2 &= 0xff;
fmba->flmstr3 &= 0xff;
fmba->flmstr5 &= 0xff;
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
} else {
wr_shift = FLMSTR_WR_SHIFT_V1;
rd_shift = FLMSTR_RD_SHIFT_V1;
fmba->flmstr1 = 0;
fmba->flmstr2 = 0;
/* Requestor ID */
fmba->flmstr3 = 0x118;
}
switch (platform) {
case PLATFORM_APL:
case PLATFORM_GLK:
/* CPU/BIOS can read descriptor and BIOS */
fmba->flmstr1 |= 0x3 << rd_shift;
/* CPU/BIOS can write BIOS */
fmba->flmstr1 |= 0x2 << wr_shift;
/* TXE can read descriptor, BIOS and Device Expansion */
fmba->flmstr2 |= 0x23 << rd_shift;
/* TXE can only write Device Expansion */
fmba->flmstr2 |= 0x20 << wr_shift;
break;
case PLATFORM_CNL:
case PLATFORM_ICL:
case PLATFORM_SKLKBL:
case PLATFORM_TGL:
case PLATFORM_JSL:
case PLATFORM_EHL:
case PLATFORM_ADL:
/* CPU/BIOS can read descriptor and BIOS. */
fmba->flmstr1 |= (1 << REGION_DESC) << rd_shift;
fmba->flmstr1 |= (1 << REGION_BIOS) << rd_shift;
/* CPU/BIOS can write BIOS. */
fmba->flmstr1 |= (1 << REGION_BIOS) << wr_shift;
/* ME can read descriptor and ME. */
fmba->flmstr2 |= (1 << REGION_DESC) << rd_shift;
fmba->flmstr2 |= (1 << REGION_ME) << rd_shift;
/* ME can write ME. */
fmba->flmstr2 |= (1 << REGION_ME) << wr_shift;
if (check_region(frba, REGION_GBE)) {
/* BIOS can read/write GbE. */
fmba->flmstr1 |= (1 << REGION_GBE) << rd_shift;
fmba->flmstr1 |= (1 << REGION_GBE) << wr_shift;
/* ME can read GbE. */
fmba->flmstr2 |= (1 << REGION_GBE) << rd_shift;
/* GbE can read descriptor and read/write GbE.. */
fmba->flmstr3 |= (1 << REGION_DESC) << rd_shift;
fmba->flmstr3 |= (1 << REGION_GBE) << rd_shift;
fmba->flmstr3 |= (1 << REGION_GBE) << wr_shift;
}
if (check_region(frba, REGION_PDR)) {
/* BIOS can read/write PDR. */
fmba->flmstr1 |= (1 << REGION_PDR) << rd_shift;
fmba->flmstr1 |= (1 << REGION_PDR) << wr_shift;
}
if (check_region(frba, REGION_EC)) {
/* BIOS can read EC. */
fmba->flmstr1 |= (1 << REGION_EC) << rd_shift;
/* EC can read descriptor and read/write EC. */
fmba->flmstr5 |= (1 << REGION_DESC) << rd_shift;
fmba->flmstr5 |= (1 << REGION_EC) << rd_shift;
fmba->flmstr5 |= (1 << REGION_EC) << wr_shift;
}
break;
default:
/* CPU/BIOS can read descriptor and BIOS. */
fmba->flmstr1 |= (1 << REGION_DESC) << rd_shift;
fmba->flmstr1 |= (1 << REGION_BIOS) << rd_shift;
/* CPU/BIOS can write BIOS. */
fmba->flmstr1 |= (1 << REGION_BIOS) << wr_shift;
/* ME can read descriptor and ME. */
fmba->flmstr2 |= (1 << REGION_DESC) << rd_shift;
fmba->flmstr2 |= (1 << REGION_ME) << rd_shift;
/* ME can write ME. */
fmba->flmstr2 |= (1 << REGION_ME) << wr_shift;
if (check_region(frba, REGION_GBE)) {
/* BIOS can read GbE. */
fmba->flmstr1 |= (1 << REGION_GBE) << rd_shift;
/* BIOS can write GbE. */
fmba->flmstr1 |= (1 << REGION_GBE) << wr_shift;
/* ME can read GbE. */
fmba->flmstr2 |= (1 << REGION_GBE) << rd_shift;
/* ME can write GbE. */
fmba->flmstr2 |= (1 << REGION_GBE) << wr_shift;
/* GbE can write GbE. */
fmba->flmstr3 |= (1 << REGION_GBE) << rd_shift;
/* GbE can read GbE. */
fmba->flmstr3 |= (1 << REGION_GBE) << wr_shift;
}
break;
}
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
write_image(filename, image, size);
}
static void enable_cpu_read_me(const char *filename, char *image, int size)
{
int rd_shift;
fmba_t *fmba = find_fmba(image, size);
if (!fmba)
exit(EXIT_FAILURE);
if (ifd_version >= IFD_VERSION_2)
rd_shift = FLMSTR_RD_SHIFT_V2;
else
rd_shift = FLMSTR_RD_SHIFT_V1;
/* CPU/BIOS can read ME. */
fmba->flmstr1 |= (1 << REGION_ME) << rd_shift;
write_image(filename, image, size);
}
static void unlock_descriptor(const char *filename, char *image, int size)
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
{
fmba_t *fmba = find_fmba(image, size);
if (!fmba)
exit(EXIT_FAILURE);
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
if (ifd_version >= IFD_VERSION_2) {
/* Access bits for each region are read: 19:8 write: 31:20 */
fmba->flmstr1 = 0xffffff00 | (fmba->flmstr1 & 0xff);
fmba->flmstr2 = 0xffffff00 | (fmba->flmstr2 & 0xff);
fmba->flmstr3 = 0xffffff00 | (fmba->flmstr3 & 0xff);
fmba->flmstr5 = 0xffffff00 | (fmba->flmstr5 & 0xff);
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
} else {
fmba->flmstr1 = 0xffff0000;
fmba->flmstr2 = 0xffff0000;
/* Keep chipset specific Requester ID */
fmba->flmstr3 = 0x08080000 | (fmba->flmstr3 & 0xffff);
ifdtool: Properly set + decode flmstr regs for IFD v2 flmstr register bits have slightly different meaning for IFD v2. BUG=chrome-os-partner:45091, chrome-os-partner:43461 TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image: Found Master Section FLMSTR1: 0x0a0b0000 (Host CPU/BIOS) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Then, run `ifdtool -l image.bin` and verify newly locked image is identical. Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked and unlocked regions are identical to above. Finally, burn glados image, run `flashrom -V`, and verify ME regions is locked and descriptor region is RO. BRANCH=None Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4 Original-Reviewed-on: https://chromium-review.googlesource.com/298968 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-11 04:07:13 +02:00
}
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
write_image(filename, image, size);
}
static void set_pchstrap(fpsba_t *fpsba, const fdbar_t *fdb, const int strap,
const unsigned int value)
{
if (!fpsba || !fdb) {
fprintf(stderr, "Internal error\n");
exit(EXIT_FAILURE);
}
/* SoC Strap Length, aka PSL, aka ISL */
int SSL = ((fdb->flmap1 >> 24) & 0xff) * sizeof(uint32_t);
if (strap >= SSL) {
fprintf(stderr, "Strap index %d out of range (max: %d)\n", strap, SSL);
exit(EXIT_FAILURE);
}
fpsba->pchstrp[strap] = value;
}
/* Set the AltMeDisable (or HAP for >= IFD_VERSION_2) */
static void fpsba_set_altmedisable(fpsba_t *fpsba, fmsba_t *fmsba, bool altmedisable)
{
if (ifd_version >= IFD_VERSION_2) {
printf("%sting the HAP bit to %s Intel ME...\n",
altmedisable?"Set":"Unset",
altmedisable?"disable":"enable");
if (altmedisable)
fpsba->pchstrp[0] |= (1 << 16);
else
fpsba->pchstrp[0] &= ~(1 << 16);
} else {
if (chipset >= CHIPSET_ICH8 && chipset <= CHIPSET_ICH10) {
printf("%sting the ICH_MeDisable, MCH_MeDisable, "
"and MCH_AltMeDisable to %s Intel ME...\n",
altmedisable?"Set":"Unset",
altmedisable?"disable":"enable");
if (altmedisable) {
/* MCH_MeDisable */
fmsba->data[0] |= 1;
/* MCH_AltMeDisable */
fmsba->data[0] |= (1 << 7);
/* ICH_MeDisable */
fpsba->pchstrp[0] |= 1;
} else {
fmsba->data[0] &= ~1;
fmsba->data[0] &= ~(1 << 7);
fpsba->pchstrp[0] &= ~1;
}
} else {
printf("%sting the AltMeDisable to %s Intel ME...\n",
altmedisable?"Set":"Unset",
altmedisable?"disable":"enable");
if (altmedisable)
fpsba->pchstrp[10] |= (1 << 7);
else
fpsba->pchstrp[10] &= ~(1 << 7);
}
}
}
static void inject_region(const char *filename, char *image, int size,
unsigned int region_type, const char *region_fname)
{
frba_t *frba = find_frba(image, size);
if (!frba)
exit(EXIT_FAILURE);
region_t region = get_region(frba, region_type);
if (region.size <= 0xfff) {
fprintf(stderr, "Region %s is disabled in target. Not injecting.\n",
region_name(region_type));
exit(EXIT_FAILURE);
}
int region_fd = open(region_fname, O_RDONLY | O_BINARY);
if (region_fd == -1) {
perror("Could not open file");
exit(EXIT_FAILURE);
}
struct stat buf;
if (fstat(region_fd, &buf) == -1) {
perror("Could not stat file");
exit(EXIT_FAILURE);
}
int region_size = buf.st_size;
printf("File %s is %d bytes\n", region_fname, region_size);
if ( (region_size > region.size) || ((region_type != 1) &&
(region_size > region.size))) {
fprintf(stderr, "Region %s is %d(0x%x) bytes. File is %d(0x%x)"
" bytes. Not injecting.\n",
region_name(region_type), region.size,
region.size, region_size, region_size);
exit(EXIT_FAILURE);
}
int offset = 0;
if ((region_type == 1) && (region_size < region.size)) {
fprintf(stderr, "Region %s is %d(0x%x) bytes. File is %d(0x%x)"
" bytes. Padding before injecting.\n",
region_name(region_type), region.size,
region.size, region_size, region_size);
offset = region.size - region_size;
memset(image + region.base, 0xff, offset);
}
if (size < region.base + offset + region_size) {
fprintf(stderr, "Output file is too small. (%d < %d)\n",
size, region.base + offset + region_size);
exit(EXIT_FAILURE);
}
if (read(region_fd, image + region.base + offset, region_size)
!= region_size) {
perror("Could not read file");
exit(EXIT_FAILURE);
}
close(region_fd);
printf("Adding %s as the %s section of %s\n",
region_fname, region_name(region_type), filename);
write_image(filename, image, size);
}
static unsigned int next_pow2(unsigned int x)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
{
unsigned int y = 1;
if (x == 0)
return 0;
while (y <= x)
y = y << 1;
return y;
}
/**
* Determine if two memory regions overlap.
*
* @param r1, r2 Memory regions to compare.
* @return 0 if the two regions are separate
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
* @return 1 if the two regions overlap
*/
static int regions_collide(const region_t *r1, const region_t *r2)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
{
if ((r1->size == 0) || (r2->size == 0))
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
return 0;
/* r1 should be either completely below or completely above r2 */
return !(r1->limit < r2->base || r1->base > r2->limit);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
}
static void new_layout(const char *filename, char *image, int size,
const char *layout_fname)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
{
FILE *romlayout;
char tempstr[256];
char layout_region_name[256];
unsigned int i, j;
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
int region_number;
2015-06-22 20:14:48 +02:00
region_t current_regions[MAX_REGIONS];
region_t new_regions[MAX_REGIONS];
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
int new_extent = 0;
char *new_image;
/* load current descriptor map and regions */
frba_t *frba = find_frba(image, size);
if (!frba)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
exit(EXIT_FAILURE);
for (i = 0; i < max_regions; i++) {
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
current_regions[i] = get_region(frba, i);
new_regions[i] = get_region(frba, i);
}
/* read new layout */
romlayout = fopen(layout_fname, "r");
if (!romlayout) {
perror("Could not read layout file.\n");
exit(EXIT_FAILURE);
}
while (!feof(romlayout)) {
char *tstr1, *tstr2;
if (2 != fscanf(romlayout, "%255s %255s\n", tempstr,
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
layout_region_name))
continue;
region_number = region_num(layout_region_name);
if (region_number < 0)
continue;
tstr1 = strtok(tempstr, ":");
tstr2 = strtok(NULL, ":");
if (!tstr1 || !tstr2) {
fprintf(stderr, "Could not parse layout file.\n");
exit(EXIT_FAILURE);
}
new_regions[region_number].base = strtol(tstr1,
(char **)NULL, 16);
new_regions[region_number].limit = strtol(tstr2,
(char **)NULL, 16);
new_regions[region_number].size =
new_regions[region_number].limit -
new_regions[region_number].base + 1;
if (new_regions[region_number].size < 0)
new_regions[region_number].size = 0;
}
fclose(romlayout);
/* check new layout */
for (i = 0; i < max_regions; i++) {
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
if (new_regions[i].size == 0)
continue;
if (new_regions[i].size < current_regions[i].size) {
printf("DANGER: Region %s is shrinking.\n",
region_name(i));
printf(" The region will be truncated to fit.\n");
printf(" This may result in an unusable image.\n");
}
for (j = i + 1; j < max_regions; j++) {
if (regions_collide(&new_regions[i], &new_regions[j])) {
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
fprintf(stderr, "Regions would overlap.\n");
exit(EXIT_FAILURE);
}
}
/* detect if the image size should grow */
if (new_extent < new_regions[i].limit)
new_extent = new_regions[i].limit;
}
/* check if the image is actually a Flash Descriptor region */
if (size == new_regions[0].size) {
printf("The image is a single Flash Descriptor:\n");
printf(" Only the descriptor will be modified\n");
new_extent = size;
} else {
new_extent = next_pow2(new_extent - 1);
if (new_extent != size) {
printf("The image has changed in size.\n");
printf("The old image is %d bytes.\n", size);
printf("The new image is %d bytes.\n", new_extent);
}
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
}
/* copy regions to a new image */
new_image = malloc(new_extent);
memset(new_image, 0xff, new_extent);
for (i = 0; i < max_regions; i++) {
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
int copy_size = new_regions[i].size;
int offset_current = 0, offset_new = 0;
const region_t *current = &current_regions[i];
const region_t *new = &new_regions[i];
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
if (new->size == 0)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
continue;
if (new->size > current->size) {
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
/* copy from the end of the current region */
copy_size = current->size;
if (i == REGION_BIOS)
offset_new = new->size - current->size;
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
}
if ((i == REGION_BIOS) && (new->size < current->size)) {
/* copy BIOS region to the end of the new region */
offset_current = current->size - new->size;
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
}
if (size < current->base + offset_current + copy_size) {
printf("Skip descriptor %d (%s) (region missing in the old image)\n", i,
region_name(i));
continue;
};
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
printf("Copy Descriptor %d (%s) (%d bytes)\n", i,
region_name(i), copy_size);
printf(" from %08x+%08x:%08x (%10d)\n", current->base,
offset_current, current->limit, current->size);
printf(" to %08x+%08x:%08x (%10d)\n", new->base,
offset_new, new->limit, new->size);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
memcpy(new_image + new->base + offset_new,
image + current->base + offset_current,
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
copy_size);
}
/* update new descriptor regions */
frba = find_frba(new_image, new_extent);
if (!frba)
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
exit(EXIT_FAILURE);
printf("Modify Flash Descriptor regions\n");
for (i = 1; i < max_regions; i++)
set_region(frba, i, &new_regions[i]);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
write_image(filename, new_image, new_extent);
free(new_image);
}
static void print_version(void)
{
printf("ifdtool v%s -- ", IFDTOOL_VERSION);
printf("Copyright (C) 2011 Google Inc.\n\n");
printf
("This program is free software: you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation, version 2 of the License.\n\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
"GNU General Public License for more details.\n\n");
}
static void print_usage(const char *name)
{
printf("usage: %s [-vhdix?] <filename>\n", name);
printf("\n"
" -d | --dump: dump intel firmware descriptor\n"
" -f | --layout <filename> dump regions into a flashrom layout file\n"
" -t | --validate Validate that the firmware descriptor layout matches the fmap layout\n"
" -x | --extract: extract intel fd modules\n"
" -i | --inject <region>:<module> inject file <module> into region <region>\n"
" -n | --newlayout <filename> update regions using a flashrom layout file\n"
" -O | --output <filename> output filename\n"
" -s | --spifreq <17|20|30|33|48|50> set the SPI frequency\n"
" -D | --density <512|1|2|4|8|16|32|64> set chip density (512 in KByte, others in MByte)\n"
" -C | --chip <0|1|2> select spi chip on which to operate\n"
" can only be used once per run:\n"
" 0 - both chips (default), 1 - first chip, 2 - second chip\n"
" -e | --em100 set SPI frequency to 20MHz and disable\n"
" Dual Output Fast Read Support\n"
" -l | --lock Lock firmware descriptor and ME region\n"
" -r | --read Enable CPU/BIOS read access for ME region\n"
" -u | --unlock Unlock firmware descriptor and ME region\n"
" -M | --altmedisable <0|1> Set the MeDisable and AltMeDisable (or HAP for skylake or newer platform)\n"
" bits to disable ME\n"
" -p | --platform Add platform-specific quirks\n"
" adl - Alder Lake\n"
" aplk - Apollo Lake\n"
" cnl - Cannon Lake\n"
" ehl - Elkhart Lake\n"
" glk - Gemini Lake\n"
" icl - Ice Lake\n"
" jsl - Jasper Lake\n"
" sklkbl - Sky Lake/Kaby Lake\n"
" tgl - Tiger Lake\n"
" -S | --setpchstrap Write a PCH strap\n"
" -V | --newvalue The new value to write into PCH strap specified by -S\n"
" -v | --version: print the version\n"
" -h | --help: print this help\n\n"
"<region> is one of Descriptor, BIOS, ME, GbE, Platform, res1, res2, res3\n"
"\n");
}
int main(int argc, char *argv[])
{
int opt, option_index = 0;
int mode_dump = 0, mode_extract = 0, mode_inject = 0, mode_spifreq = 0;
int mode_em100 = 0, mode_locked = 0, mode_unlocked = 0, mode_validate = 0;
int mode_layout = 0, mode_newlayout = 0, mode_density = 0, mode_setstrap = 0;
int mode_read = 0, mode_altmedisable = 0, altmedisable = 0;
char *region_type_string = NULL, *region_fname = NULL;
const char *layout_fname = NULL;
char *new_filename = NULL;
int region_type = -1, inputfreq = 0;
unsigned int value = 0;
unsigned int pchstrap = 0;
unsigned int new_density = 0;
enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ;
static const struct option long_options[] = {
{"dump", 0, NULL, 'd'},
{"layout", 1, NULL, 'f'},
{"extract", 0, NULL, 'x'},
{"inject", 1, NULL, 'i'},
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
{"newlayout", 1, NULL, 'n'},
{"output", 1, NULL, 'O'},
{"spifreq", 1, NULL, 's'},
{"density", 1, NULL, 'D'},
{"chip", 1, NULL, 'C'},
{"altmedisable", 1, NULL, 'M'},
{"em100", 0, NULL, 'e'},
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
{"lock", 0, NULL, 'l'},
{"read", 0, NULL, 'r'},
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
{"unlock", 0, NULL, 'u'},
{"version", 0, NULL, 'v'},
{"help", 0, NULL, 'h'},
{"platform", 0, NULL, 'p'},
{"validate", 0, NULL, 't'},
{"setpchstrap", 1, NULL, 'S'},
{"newvalue", 1, NULL, 'V'},
{0, 0, 0, 0}
};
while ((opt = getopt_long(argc, argv, "S:V:df:D:C:M:xi:n:O:s:p:elruvth?",
long_options, &option_index)) != EOF) {
switch (opt) {
case 'd':
mode_dump = 1;
break;
case 'S':
mode_setstrap = 1;
pchstrap = strtoul(optarg, NULL, 0);
break;
case 'V':
value = strtoul(optarg, NULL, 0);
break;
case 'f':
mode_layout = 1;
layout_fname = strdup(optarg);
if (!layout_fname) {
fprintf(stderr, "No layout file specified\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
break;
case 'x':
mode_extract = 1;
break;
case 'i':
// separate type and file name
region_type_string = strdup(optarg);
region_fname = strchr(region_type_string, ':');
if (!region_fname) {
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
region_fname[0] = '\0';
region_fname++;
// Descriptor, BIOS, ME, GbE, Platform
// valid type?
if (!strcasecmp("Descriptor", region_type_string))
region_type = 0;
else if (!strcasecmp("BIOS", region_type_string))
region_type = 1;
else if (!strcasecmp("ME", region_type_string))
region_type = 2;
else if (!strcasecmp("GbE", region_type_string))
region_type = 3;
else if (!strcasecmp("Platform", region_type_string))
region_type = 4;
else if (!strcasecmp("res1", region_type_string))
region_type = 5;
else if (!strcasecmp("res2", region_type_string))
region_type = 6;
else if (!strcasecmp("res3", region_type_string))
region_type = 7;
2015-06-22 20:14:48 +02:00
else if (!strcasecmp("EC", region_type_string))
region_type = 8;
if (region_type == -1) {
fprintf(stderr, "No such region type: '%s'\n\n",
region_type_string);
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
mode_inject = 1;
break;
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
case 'n':
mode_newlayout = 1;
layout_fname = strdup(optarg);
if (!layout_fname) {
fprintf(stderr, "No layout file specified\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
break;
case 'O':
new_filename = strdup(optarg);
if (!new_filename) {
fprintf(stderr, "No output filename specified\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
break;
case 'D':
mode_density = 1;
new_density = strtoul(optarg, NULL, 0);
switch (new_density) {
case 512:
new_density = COMPONENT_DENSITY_512KB;
break;
case 1:
new_density = COMPONENT_DENSITY_1MB;
break;
case 2:
new_density = COMPONENT_DENSITY_2MB;
break;
case 4:
new_density = COMPONENT_DENSITY_4MB;
break;
case 8:
new_density = COMPONENT_DENSITY_8MB;
break;
case 16:
new_density = COMPONENT_DENSITY_16MB;
break;
case 32:
new_density = COMPONENT_DENSITY_32MB;
break;
case 64:
new_density = COMPONENT_DENSITY_64MB;
break;
case 0:
new_density = COMPONENT_DENSITY_UNUSED;
break;
default:
printf("error: Unknown density\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
break;
case 'C':
selected_chip = strtol(optarg, NULL, 0);
if (selected_chip > 2) {
fprintf(stderr, "error: Invalid chip selection\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
break;
case 'M':
mode_altmedisable = 1;
altmedisable = strtol(optarg, NULL, 0);
if (altmedisable > 1) {
fprintf(stderr, "error: Illegal value\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
break;
case 's':
// Parse the requested SPI frequency
inputfreq = strtol(optarg, NULL, 0);
switch (inputfreq) {
2015-06-22 20:14:48 +02:00
case 17:
spifreq = SPI_FREQUENCY_17MHZ;
break;
case 20:
spifreq = SPI_FREQUENCY_20MHZ;
break;
2015-06-22 20:14:48 +02:00
case 30:
spifreq = SPI_FREQUENCY_50MHZ_30MHZ;
break;
case 33:
spifreq = SPI_FREQUENCY_33MHZ;
break;
2015-06-22 20:14:48 +02:00
case 48:
spifreq = SPI_FREQUENCY_48MHZ;
break;
case 50:
2015-06-22 20:14:48 +02:00
spifreq = SPI_FREQUENCY_50MHZ_30MHZ;
break;
default:
fprintf(stderr, "Invalid SPI Frequency: %d\n",
inputfreq);
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
mode_spifreq = 1;
break;
case 'e':
mode_em100 = 1;
break;
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
case 'l':
mode_locked = 1;
if (mode_unlocked == 1) {
fprintf(stderr, "Locking/Unlocking FD and ME are mutually exclusive\n");
exit(EXIT_FAILURE);
}
break;
case 'r':
mode_read = 1;
break;
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
case 'u':
mode_unlocked = 1;
if (mode_locked == 1) {
fprintf(stderr, "Locking/Unlocking FD and ME are mutually exclusive\n");
exit(EXIT_FAILURE);
}
break;
case 'p':
if (!strcmp(optarg, "aplk")) {
platform = PLATFORM_APL;
} else if (!strcmp(optarg, "cnl")) {
platform = PLATFORM_CNL;
} else if (!strcmp(optarg, "ehl")) {
platform = PLATFORM_EHL;
} else if (!strcmp(optarg, "glk")) {
platform = PLATFORM_GLK;
} else if (!strcmp(optarg, "icl")) {
platform = PLATFORM_ICL;
} else if (!strcmp(optarg, "jsl")) {
platform = PLATFORM_JSL;
} else if (!strcmp(optarg, "sklkbl")) {
platform = PLATFORM_SKLKBL;
} else if (!strcmp(optarg, "tgl")) {
platform = PLATFORM_TGL;
} else if (!strcmp(optarg, "adl")) {
platform = PLATFORM_ADL;
} else {
fprintf(stderr, "Unknown platform: %s\n", optarg);
exit(EXIT_FAILURE);
}
fprintf(stderr, "Platform is: %s\n", optarg);
break;
case 't':
mode_validate = 1;
break;
case 'v':
print_version();
exit(EXIT_SUCCESS);
break;
case 'h':
case '?':
default:
print_usage(argv[0]);
exit(EXIT_SUCCESS);
break;
}
}
if ((mode_dump + mode_layout + mode_extract + mode_inject + mode_setstrap +
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
mode_newlayout + (mode_spifreq | mode_em100 | mode_unlocked |
mode_locked) + mode_altmedisable + mode_validate) > 1) {
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
fprintf(stderr, "You may not specify more than one mode.\n\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
if ((mode_dump + mode_layout + mode_extract + mode_inject + mode_setstrap +
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
mode_newlayout + mode_spifreq + mode_em100 + mode_locked +
mode_unlocked + mode_density + mode_altmedisable + mode_validate) == 0) {
fprintf(stderr, "You need to specify a mode.\n\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
if (optind + 1 != argc) {
fprintf(stderr, "You need to specify a file.\n\n");
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
char *filename = argv[optind];
int bios_fd = open(filename, O_RDONLY | O_BINARY);
if (bios_fd == -1) {
perror("Could not open file");
exit(EXIT_FAILURE);
}
struct stat buf;
if (fstat(bios_fd, &buf) == -1) {
perror("Could not stat file");
exit(EXIT_FAILURE);
}
int size = buf.st_size;
printf("File %s is %d bytes\n", filename, size);
char *image = malloc(size);
if (!image) {
printf("Out of memory.\n");
exit(EXIT_FAILURE);
}
if (read(bios_fd, image, size) != size) {
perror("Could not read file");
exit(EXIT_FAILURE);
}
close(bios_fd);
// generate new filename
if (new_filename == NULL) {
new_filename = (char *) malloc((strlen(filename) + 5) * sizeof(char));
if (!new_filename) {
printf("Out of memory.\n");
exit(EXIT_FAILURE);
}
// - 5: leave room for ".new\0"
strcpy(new_filename, filename);
strcat(new_filename, ".new");
}
2015-06-22 20:14:48 +02:00
check_ifd_version(image, size);
if (mode_dump)
dump_fd(image, size);
if (mode_layout)
dump_layout(image, size, layout_fname);
if (mode_extract)
write_regions(image, size);
if (mode_validate)
validate_layout(image, size);
if (mode_inject)
inject_region(new_filename, image, size, region_type,
region_fname);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
if (mode_newlayout)
new_layout(new_filename, image, size, layout_fname);
util/ifdtool: add option to change flash layout The new option "--newlayout <file>" will read <file> in flashrom's layout format and copy flash regions from the current flash image file to a new flash image file. If a region grows, the padding is added at the beginning of the target region in the new file so that the data is "right-aligned" to the end of the region. If a region shrinks, a warning is given and the tail end of existing data is copied to the target region in the new file. Regions of zero or negative size are ignored. (In the example below 00fff000:00000fff regions are an artifact of the address encoding in the register fields.) Example Usage: Given a flash image for a board with a Sandy Bridge processor and Intel 6-Series chipset in the file vpx7654.bin ifdtool --layout layout.txt vpx7564.bin will yield the file layout.txt: 00000000:00000fff fd 00180000:003fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd Notice that the "bios" portion extends to the end of the 4MB flash. It may be edited to extend the bios portion to consume to the extent of an 8MB flash. like layout2.txt: 00000000:00000fff fd 00180000:007fffff bios 00001000:0017ffff me 00fff000:00000fff gbe 00fff000:00000fff pd ifdtool --newlayout layout.txt vpx7654.bin will create a file vpx7654.bin.new that is 8MB. Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5312 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27 15:25:19 +01:00
if (mode_spifreq)
set_spi_frequency(new_filename, image, size, spifreq);
if (mode_density)
set_chipdensity(new_filename, image, size, new_density);
if (mode_em100)
set_em100_mode(new_filename, image, size);
if (mode_locked)
lock_descriptor(new_filename, image, size);
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
if (mode_read)
enable_cpu_read_me(new_filename, image, size);
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
if (mode_unlocked)
unlock_descriptor(new_filename, image, size);
ifdtool: Add locking/unlocking and dumping of access permissions ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-09-27 02:33:39 +02:00
if (mode_setstrap) {
fpsba_t *fpsba = find_fpsba(image, size);
const fdbar_t *fdb = find_fd(image, size);
set_pchstrap(fpsba, fdb, pchstrap, value);
write_image(new_filename, image, size);
}
if (mode_altmedisable) {
fpsba_t *fpsba = find_fpsba(image, size);
fmsba_t *fmsba = find_fmsba(image, size);
fpsba_set_altmedisable(fpsba, fmsba, altmedisable);
write_image(new_filename, image, size);
}
free(new_filename);
free(image);
return 0;
}