GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/util/autoport/bd82x6x.go

441 lines
13 KiB
Go
Raw Normal View History

autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
package main
import (
"fmt"
"os"
)
type bd82x6x struct {
variant string
node *DevTreeNode
}
func (b bd82x6x) writeGPIOSet(ctx Context, sb *os.File,
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
val uint32, set uint, partno int, constraint uint32) {
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
max := uint(32)
if set == 3 {
max = 12
}
bits := [6][2]string{
{"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"},
{"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"},
{"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"},
{"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"},
{"GPIO_NO_INVERT", "GPIO_INVERT"},
{"GPIO_NO_BLINK", "GPIO_BLINK"},
}
for i := uint(0); i < max; i++ {
sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetree Set up generic decode ranges based on the devicetree settings. Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-16 23:29:23 +02:00
if (constraint>>i)&1 == 1 {
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
fmt.Fprintf(sb, " .gpio%d = %s,\n",
(set-1)*32+i,
bits[partno][(val>>i)&1])
}
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
}
}
func (b bd82x6x) GPIO(ctx Context, inteltool InteltoolData) {
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
var constraint uint32
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
gpio := Create(ctx, "gpio.c")
defer gpio.Close()
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
AddBootBlockFile("gpio.c", "")
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
AddROMStageFile("gpio.c", "")
autoport: Add GPL boilerplate header to not empty .c files The idea behind this not to enforce a license on autogenerated code but is simply out of convenience in the case one wants to make the result public (in which case it needs to have these license headers). Change-Id: I1d6b48762b1249bb0becb178a30e1396bf6978fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 10:33:56 +02:00
Add_gpl(gpio)
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
gpio.WriteString("#include <southbridge/intel/common/gpio.h>\n\n")
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
addresses := [3][6]int{
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
{0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18},
{0x30, 0x34, 0x38, 0x64, -1, -1},
{0x40, 0x44, 0x48, 0x68, -1, -1},
}
for set := 1; set <= 3; set++ {
for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} {
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
addr := addresses[set-1][partno]
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
if addr < 0 {
continue
}
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
fmt.Fprintf(gpio, "static const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n",
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
set, set, part)
autoport/bd82x6x.go: Improve gpio.c generation This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 09:40:43 +02:00
constraint = 0xffffffff
switch part {
case "direction":
/* Ignored on native mode */
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
case "level":
/* Level doesn't matter for input */
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])]
case "reset":
/* Only show reset */
constraint = inteltool.GPIO[uint16(addresses[set-1][3])]
case "invert":
/* Only on input and only show inverted GPIO */
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
constraint &= inteltool.GPIO[uint16(addresses[set-1][1])]
constraint &= inteltool.GPIO[uint16(addresses[set-1][4])]
case "blink":
/* Only on output and only show blinking GPIO */
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])]
constraint &= inteltool.GPIO[uint16(addresses[set-1][5])]
}
b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno, constraint)
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
gpio.WriteString("};\n\n")
}
}
gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = {
.set1 = {
.mode = &pch_gpio_set1_mode,
.direction = &pch_gpio_set1_direction,
.level = &pch_gpio_set1_level,
.blink = &pch_gpio_set1_blink,
.invert = &pch_gpio_set1_invert,
.reset = &pch_gpio_set1_reset,
},
.set2 = {
.mode = &pch_gpio_set2_mode,
.direction = &pch_gpio_set2_direction,
.level = &pch_gpio_set2_level,
.reset = &pch_gpio_set2_reset,
},
.set3 = {
.mode = &pch_gpio_set3_mode,
.direction = &pch_gpio_set3_direction,
.level = &pch_gpio_set3_level,
.reset = &pch_gpio_set3_reset,
},
};
`)
}
func (b bd82x6x) IsPCIeHotplug(ctx Context, port int) bool {
portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}]
if !ok {
return false
}
return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0
}
func ich9GetFlashSize(ctx Context) {
inteltool := ctx.InfoSource.GetInteltool()
switch (inteltool.RCBA[0x3410] >> 10) & 3 {
/* SPI. All boards I've seen with sandy/ivy use SPI. */
case 3:
ROMProtocol = "SPI"
highflkb := uint32(0)
for reg := uint16(0); reg < 5; reg++ {
fl := (inteltool.RCBA[0x3854+4*reg] >> 16) & 0x1fff
autoport/bd82x6x: Fix off-by-one error Change-Id: Ibd5c8a1364ab183f72e12cc9b450a36200fe3fde Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10371 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-29 21:43:42 +02:00
flkb := (fl + 1) << 2
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
if flkb > highflkb {
highflkb = flkb
}
}
ROMSizeKB = int(highflkb)
/* Shared with ME. Flashrom is unable to handle it. */
FlashROMSupport = "n"
}
}
func (b bd82x6x) GetGPIOHeader() string {
return "southbridge/intel/bd82x6x/pch.h"
}
func (b bd82x6x) EnableGPE(in int) {
b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2"
}
func (b bd82x6x) EncodeGPE(in int) int {
return in + 0x10
}
func (b bd82x6x) DecodeGPE(in int) int {
return in - 0x10
}
func (b bd82x6x) NeedRouteGPIOManually() {
b.node.Comment += ", FIXME: set gpiX_routing for EC support"
}
func (b bd82x6x) Scan(ctx Context, addr PCIDevData) {
SouthBridge = &b
inteltool := ctx.InfoSource.GetInteltool()
b.GPIO(ctx, inteltool)
KconfigBool["SOUTHBRIDGE_INTEL_"+b.variant] = true
KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true
KconfigInt["USBDEBUG_HCD_INDEX"] = 2
KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this"
dmi := ctx.InfoSource.GetDMI()
if dmi.Vendor == "LENOVO" {
KconfigInt["DRAM_RESET_GATE_GPIO"] = 10
} else {
KconfigInt["DRAM_RESET_GATE_GPIO"] = 60
}
KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this"
ich9GetFlashSize(ctx)
DSDTDefines = append(DSDTDefines,
DSDTDefine{
Key: "BRIGHTNESS_UP",
Value: "\\_SB.PCI0.GFX0.INCB",
},
DSDTDefine{
Key: "BRIGHTNESS_DOWN",
Value: "\\_SB.PCI0.GFX0.DECB",
})
/* SPI init */
MainboardIncludes = append(MainboardIncludes, "southbridge/intel/bd82x6x/pch.h")
FADT := ctx.InfoSource.GetACPI()["FACP"]
pcieHotplugMap := "{ "
for port := 0; port < 7; port++ {
if b.IsPCIeHotplug(ctx, port) {
pcieHotplugMap += "1, "
} else {
pcieHotplugMap += "0, "
}
}
if b.IsPCIeHotplug(ctx, 7) {
pcieHotplugMap += "1 }"
} else {
pcieHotplugMap += "0 }"
}
cur := DevTreeNode{
Chip: "southbridge/intel/bd82x6x",
Comment: "Intel Series 6 Cougar Point PCH",
Registers: map[string]string{
"sata_interface_speed_support": "0x3",
"gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]),
"gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]),
"gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]),
"gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]),
"pcie_port_coalesce": "1",
"pcie_hotplug_map": pcieHotplugMap,
"sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f),
"c2_latency": FormatHexLE16(FADT[96:98]),
"docking_supported": (FormatBool((FADT[113] & (1 << 1)) != 0)),
sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetree Set up generic decode ranges based on the devicetree settings. Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-16 23:29:23 +02:00
"spi_uvscc": fmt.Sprintf("0x%x", inteltool.RCBA[0x38c8]),
"spi_lvscc": fmt.Sprintf("0x%x", inteltool.RCBA[0x38c4]&^(1<<23)),
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
},
PCISlots: []PCISlot{
PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, additionalComment: "USB 3.0 Controller"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, additionalComment: "Management Engine Interface 1"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, additionalComment: "Management Engine Interface 2"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, additionalComment: "Management Engine IDE-R"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, additionalComment: "Management Engine KT"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, additionalComment: "Intel Gigabit Ethernet"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #2"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, additionalComment: "High Definition Audio"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, additionalComment: "PCIe Port #1"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, additionalComment: "PCIe Port #2"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, additionalComment: "PCIe Port #3"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, additionalComment: "PCIe Port #4"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, additionalComment: "PCIe Port #5"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, additionalComment: "PCIe Port #6"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #1"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, additionalComment: "PCI bridge"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, additionalComment: "LPC bridge"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, additionalComment: "SATA Controller 1"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, additionalComment: "SMBus"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, additionalComment: "SATA Controller 2"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, additionalComment: "Thermal"},
},
}
b.node = &cur
xhciDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}]
if ok {
cur.Registers["xhci_switchable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xd4:0xd8])
cur.Registers["superspeed_capable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xdc:0xe0])
cur.Registers["xhci_overcurrent_mapping"] = FormatHexLE32(xhciDev.ConfigDump[0xc0:0xc4])
}
PutPCIChip(addr, cur)
util/autoport: Remove redundant comment Nobody needs "LPC bridge PCI-LPC bridge". Change-Id: Iac833d4fa34b00d89bdfc9aeb06a96583840b900 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-05 00:32:02 +01:00
PutPCIDevParent(addr, "", "lpc")
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
DSDTIncludes = append(DSDTIncludes, DSDTInclude{
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
File: "southbridge/intel/common/acpi/platform.asl",
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
})
DSDTIncludes = append(DSDTIncludes, DSDTInclude{
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
File: "southbridge/intel/bd82x6x/acpi/globalnvs.asl",
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
})
DSDTIncludes = append(DSDTIncludes, DSDTInclude{
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
File: "southbridge/intel/common/acpi/sleepstates.asl",
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
})
DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{
File: "southbridge/intel/bd82x6x/acpi/pch.asl",
})
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
AddBootBlockFile("early_init.c", "")
AddROMStageFile("early_init.c", "")
sb := Create(ctx, "early_init.c")
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
defer sb.Close()
autoport: Add GPL boilerplate header to not empty .c files The idea behind this not to enforce a license on autogenerated code but is simply out of convenience in the case one wants to make the result public (in which case it needs to have these license headers). Change-Id: I1d6b48762b1249bb0becb178a30e1396bf6978fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 10:33:56 +02:00
Add_gpl(sb)
util/autoport/bd82x6x.go: Drop unused includes Change-Id: Ifc0bf18dedc112e346062e0e0e988ac102991bb8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40826 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29 07:26:25 +02:00
sb.WriteString(`
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
#include <bootblock_common.h>
util/autoport: Fix include style Change-Id: If0dfee38bd82b3c8e9b5173e520cb244787c0a9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30970 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16 21:24:59 +01:00
#include <northbridge/intel/sandybridge/raminit_native.h>
#include <southbridge/intel/bd82x6x/pch.h>
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
`)
sb.WriteString("const struct southbridge_usb_port mainboard_usb_ports[] = {\n")
currentMap := map[uint32]int{
0x20000153: 0,
0x20000f57: 1,
0x2000055b: 2,
0x20000f51: 3,
0x2000094a: 4,
}
for port := uint(0); port < 14; port++ {
var pinmask uint32
OCPin := -1
if port < 8 {
pinmask = inteltool.RCBA[0x35a0]
} else {
pinmask = inteltool.RCBA[0x35a4]
}
for pin := uint(0); pin < 4; pin++ {
if ((pinmask >> ((port % 8) + 8*pin)) & 1) != 0 {
OCPin = int(pin)
if port >= 8 {
OCPin += 4
}
}
}
fmt.Fprintf(sb, "\t{ %d, %d, %d },\n",
((inteltool.RCBA[0x359c]>>port)&1)^1,
currentMap[inteltool.RCBA[uint16(0x3500+4*port)]],
OCPin)
}
sb.WriteString("};\n")
guessedMap := GuessSPDMap(ctx)
sb.WriteString(`
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
void bootblock_mainboard_early_init(void)
ivy: Add a possiblity for mainboard early init. This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-31 14:00:54 +01:00
{
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
`)
RestorePCI16Simple(sb, addr, 0x82)
ivy: Add a possiblity for mainboard early init. This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-31 14:00:54 +01:00
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
RestorePCI16Simple(sb, addr, 0x80)
sb.WriteString(`}
Merge sandy/ivybridge romstage flow for MRC and non-MRC. Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10 01:36:25 +01:00
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
/* FIXME: Put proper SPD map here. */
autoport: Fix romstage generator Prototype changed here: e258b9a intel sandy/ivy: Improve DIMM replacement detection Change-Id: Id79238db2e497b9163f3bd1b1d5d4bc11fe4da9e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17711 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-04 10:17:07 +01:00
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
{
`)
for i, spd := range guessedMap {
autoport: Fix romstage generator Prototype changed here: e258b9a intel sandy/ivy: Improve DIMM replacement detection Change-Id: Id79238db2e497b9163f3bd1b1d5d4bc11fe4da9e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17711 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-04 10:17:07 +01:00
fmt.Fprintf(sb, "\tread_spd(&spd[%d], 0x%02x, id_only);\n", i, spd)
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
}
sb.WriteString("}\n")
autoport: move the generated gnvs.c to acpi_tables.c Change-Id: I8f6eea579f69060608639b1c50255acd8ab5a4a2 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/30889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-12 14:05:10 +01:00
gnvs := Create(ctx, "acpi_tables.c")
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
defer gnvs.Close()
autoport: Add GPL boilerplate header to not empty .c files The idea behind this not to enforce a license on autogenerated code but is simply out of convenience in the case one wants to make the result public (in which case it needs to have these license headers). Change-Id: I1d6b48762b1249bb0becb178a30e1396bf6978fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01 10:33:56 +02:00
Add_gpl(gnvs)
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
gnvs.WriteString(`#include <southbridge/intel/bd82x6x/nvs.h>
/* FIXME: check this function. */
void acpi_create_gnvs(global_nvs_t *gnvs)
{
/* Disable USB ports in S3 by default */
gnvs->s3u0 = 0;
gnvs->s3u1 = 0;
/* Disable USB ports in S5 by default */
gnvs->s5u0 = 0;
gnvs->s5u1 = 0;
util/autoport: correct build errors of produced files Change-Id: I8d1a6af6f1d70268f17692bee130c08502082c97 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-08 15:05:56 +01:00
/* The lid is open by default. */
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
gnvs->lids = 1;
gnvs->tcrt = 100;
gnvs->tpsv = 90;
}
`)
}
func init() {
/* BD82X6X LPC */
sb/intel/bd82x6x: Add missing PCIIDs for variants . Change-Id: I917b8167a028aa9412b0cc6dedf8f09a1d1fae7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/12820 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-01-02 01:47:26 +01:00
for id := 0x1c40; id <= 0x1c5f; id++ {
autoport: Add missing casts Change-Id: I04abdd48f5e2440756f9b03041d46c773f200368 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/12890 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-11 18:43:25 +01:00
RegisterPCI(0x8086, uint16(id), bd82x6x{variant: "BD82X6X"})
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
}
/* C216 LPC */
sb/intel/bd82x6x: Add missing PCIIDs for variants . Change-Id: I917b8167a028aa9412b0cc6dedf8f09a1d1fae7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/12820 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-01-02 01:47:26 +01:00
for id := 0x1e41; id <= 0x1e5f; id++ {
autoport: Add missing casts Change-Id: I04abdd48f5e2440756f9b03041d46c773f200368 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/12890 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-11 18:43:25 +01:00
RegisterPCI(0x8086, uint16(id), bd82x6x{variant: "C216"})
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
}
/* PCIe bridge */
for _, id := range []uint16{
util/autoport: Separate NB and SB PCIe port IDs The root port IDs on bd82x6x.go were for both the PCH and the CPU PCIe root ports. Put the latter on sandybridge.go instead, and add missing IDs. Change-Id: I04b5220c460f1930accd64b63c11f512581f2c6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30962 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-10 19:52:51 +01:00
0x1c10, 0x1c12, 0x1c14, 0x1c16,
0x1c18, 0x1c1a, 0x1c1c, 0x1c1e,
0x1e10, 0x1e12, 0x1e14, 0x1e16,
0x1e18, 0x1e1a, 0x1e1c, 0x1e1e,
0x1e25, 0x244e, 0x2448,
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
} {
RegisterPCI(0x8086, id, GenericPCI{})
}
/* SMBus controller */
RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"})
RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"})
/* SATA */
for _, id := range []uint16{
0x1c00, 0x1c01, 0x1c02, 0x1c03,
0x1e00, 0x1e01, 0x1e02, 0x1e03,
} {
RegisterPCI(0x8086, id, GenericPCI{})
}
/* EHCI */
for _, id := range []uint16{
0x1c26, 0x1c2d, 0x1e26, 0x1e2d,
} {
RegisterPCI(0x8086, id, GenericPCI{})
}
/* XHCI */
RegisterPCI(0x8086, 0x1e31, GenericPCI{})
/* ME and children */
for _, id := range []uint16{
0x1c3a, 0x1c3b, 0x1c3c, 0x1c3d,
0x1e3a, 0x1e3b, 0x1e3c, 0x1e3d,
} {
RegisterPCI(0x8086, id, GenericPCI{})
}
/* Ethernet */
RegisterPCI(0x8086, 0x1502, GenericPCI{})
autoport: add missing PCI IDs As seen on ASUS P8Z77-V Pro Change-Id: I9fce9a35174b5120f67c2345a0807db1b843eb48 Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com> Reviewed-on: https://review.coreboot.org/25661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-24 19:15:08 +01:00
RegisterPCI(0x8086, 0x1503, GenericPCI{})
autoport: Write autoport together with porting guide for sandy/ivybridge. This should be able to generate bootable ports for sandy/ivy, possible with minor fixes. Howto is in readme.md Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7131 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2014-10-15 21:51:47 +02:00
}