GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/include/device/pnp.h

114 lines
3.4 KiB
C
Raw Normal View History

- Major cleanup of the bootpath - Changes to allow more code to be compiled both ways - Working SMP support git-svn-id: svn://svn.coreboot.org/coreboot/trunk@987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-07-19 06:28:22 +02:00
#ifndef DEVICE_PNP_H
#define DEVICE_PNP_H
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
#include <stdint.h>
build rules: Identify build stage with simple variables Provide simple environment variables telling which stage of boot is being built. Also move this to arch-agnostic location. Change-Id: I8cbb5cf91f53e01c06e7d672b5be3f5c235f911d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5410 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-02-26 14:19:04 +01:00
#include <rules.h>
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
#include <device/device.h>
#include <device/pnp_def.h>
superio: Replace the indexed I/O functions Replace the multiple indexed I/O read and write functions with common functions. Change-Id: Idfe7a8784c28d51b3fbcb2f4e26beaa0b91741a8 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/10145 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-12 14:53:11 +02:00
#include <arch/io.h>
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
Add directive __SIMPLE_DEVICE__ The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-25 22:17:43 +02:00
#ifndef __SIMPLE_DEVICE__
Cosmetics and coding style fixes in devices/*. - Whitespace and indentation fixes in various places. - Fix various typos. - Use u8, u16 etc. everywhere. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18 02:00:57 +02:00
/* Primitive PNP resource manipulation */
include/device/pnp.h: Don't use device_t Use of device_t is deprecated. Change-Id: I9364c9681dd89f09480368a997f6d1f04cde1488 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-19 14:42:02 +02:00
void pnp_write_config(struct device *dev, u8 reg, u8 value);
u8 pnp_read_config(struct device *dev, u8 reg);
void pnp_set_logical_device(struct device *dev);
void pnp_set_enable(struct device *dev, int enable);
int pnp_read_enable(struct device *dev);
void pnp_set_iobase(struct device *dev, u8 index, u16 iobase);
void pnp_set_irq(struct device *dev, u8 index, u8 irq);
void pnp_set_drq(struct device *dev, u8 index, u8 drq);
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
/* PNP device operations */
include/device/pnp.h: Don't use device_t Use of device_t is deprecated. Change-Id: I9364c9681dd89f09480368a997f6d1f04cde1488 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-19 14:42:02 +02:00
void pnp_read_resources(struct device *dev);
void pnp_set_resources(struct device *dev);
void pnp_enable_resources(struct device *dev);
void pnp_enable(struct device *dev);
void pnp_alt_enable(struct device *dev);
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
This, ladies and gentlement, is commit #4000. Use the (almost) same strict CFLAGS in v2 that we use on v3. And fix a few include files and missing prototypes. Also, fix up the Config-abuild.lb files to properly work for cross compiling. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-13 16:42:27 +01:00
extern struct device_operations pnp_ops;
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
/* PNP helper operations */
struct pnp_info {
pnp_device: improve readability Add comments on the ops handling in pnp_enable_devices function and the pnp_info struct. Also remove the negation in the check if an LDN-specific override is used. This patch doesn't change the logic though. Change-Id: I3e80dbce1f29ee3e95e3b1d71c9b8479561d5c1a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-06 19:38:24 +02:00
struct device_operations *ops; /* LDN-specific ops override */
W83627DHG/W83627EHG fixups for virtual LDNs. W83627DHG: - Add proper "virtual LDN" handling for the LDNs that need it (i.e., those that don't have their "enable" bit in bit 0 of the 0x30 register). - Fix various I/O masks in the pnp_dev_info[] array as per datasheet. Add missing PNP_IRQ0 to the W83627DHG_ACPI LDN. W83627EHG: - Similar to W83627DHG, improve the "virtual LDN" setup a bit (it was mostly implemented already, though). - Add missing PNP_IRQ0 to the W83627EHG_ACPI LDN. Also: Fix up devicetree.cb of all boards using W83627DHG/W83627EHG to adapt for the virtual LDNs. include/device/pnp.h: Add comment that 'function' (which refers to the LDN and should probably be renamed later) has to be at least 16 bits wide. In theory LDNs could use u8, but due to the virtual LDN info being encoded in the "high byte" of 'function' it must be at least u16. asrock/939a785gmh/romstage.c: Drop unused GPIO6_DEV. ibase/mb899/romstage.c: Use DUMMY_DEV instead of a specific LDN (serial port 1 in this case) to avoid confusion. The global registers manipulated there are accessible from any LDN. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6140 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-05 23:36:14 +01:00
unsigned int function; /* Must be at least 16 bits (virtual LDNs)! */
Cosmetics and coding style fixes in devices/*. - Whitespace and indentation fixes in various places. - Fix various typos. - Use u8, u16 etc. everywhere. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18 02:00:57 +02:00
unsigned int flags;
device/pnp: Ability to set vendor specific logical device config According to the PNP ISA v1.0a spec, config registers in the range of 0xf0 up to 0xfe are vendor defined and may be used for any purpose. Config register 0xff is reserved and is defined as such. Currently, only vendor specific registers 0xf0, 0xf1, 0xf4, and 0xfa are able to be set using the PNP_MSCx bit flag masks. This patch adds support for all 15 vendor specific config registers, and updates the existing superio pnp_info to use them where appropriate. Change-Id: Id43b85f74e3192b17dbd7e54c4c6136a2e59ad55 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12808 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-28 13:04:47 +01:00
#define PNP_IO0 0x000001
#define PNP_IO1 0x000002
#define PNP_IO2 0x000004
#define PNP_IO3 0x000008
#define PNP_IRQ0 0x000010
#define PNP_IRQ1 0x000020
#define PNP_DRQ0 0x000040
#define PNP_DRQ1 0x000080
#define PNP_EN 0x000100
#define PNP_MSC0 0x000200
#define PNP_MSC1 0x000400
#define PNP_MSC2 0x000800
#define PNP_MSC3 0x001000
#define PNP_MSC4 0x002000
#define PNP_MSC5 0x004000
#define PNP_MSC6 0x008000
#define PNP_MSC7 0x010000
#define PNP_MSC8 0x020000
#define PNP_MSC9 0x040000
#define PNP_MSCA 0x080000
#define PNP_MSCB 0x100000
#define PNP_MSCC 0x200000
#define PNP_MSCD 0x400000
#define PNP_MSCE 0x800000
device/pnp: remove struct io_info The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-07 05:55:01 +02:00
u16 io0, io1, io2, io3;
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
};
include/device/pnp.h: Don't use device_t Use of device_t is deprecated. Change-Id: I9364c9681dd89f09480368a997f6d1f04cde1488 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-19 14:42:02 +02:00
struct resource *pnp_get_resource(struct device *dev, unsigned int index);
- First stab at running linuxbios without the old static device tree. Things are close but not quite there yet. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-16 08:20:29 +02:00
void pnp_enable_devices(struct device *dev, struct device_operations *ops,
Cosmetics and coding style fixes in devices/*. - Whitespace and indentation fixes in various places. - Fix various typos. - Use u8, u16 etc. everywhere. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18 02:00:57 +02:00
unsigned int functions, struct pnp_info *info);
- Major cleanup of the bootpath - Changes to allow more code to be compiled both ways - Working SMP support git-svn-id: svn://svn.coreboot.org/coreboot/trunk@987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-07-19 06:28:22 +02:00
pnp: Implement common handling for PnP config modes Many super i/o chips only answer to PnP requests if they are in a configuration state (sometimes also called ext func mode). To cope with that, the code of many chips implements its own version of our default PnP functions like pnp_set_resource(), pnp_enable_resource() etc. To avoid this code duplication, this patch extends our PnP device interface with optional functions to enter and exit configuration mode. Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-10 22:08:35 +02:00
struct pnp_mode_ops {
include/device/pnp.h: Don't use device_t Use of device_t is deprecated. Change-Id: I9364c9681dd89f09480368a997f6d1f04cde1488 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-19 14:42:02 +02:00
void (*enter_conf_mode)(struct device *dev);
void (*exit_conf_mode)(struct device *dev);
pnp: Implement common handling for PnP config modes Many super i/o chips only answer to PnP requests if they are in a configuration state (sometimes also called ext func mode). To cope with that, the code of many chips implements its own version of our default PnP functions like pnp_set_resource(), pnp_enable_resource() etc. To avoid this code duplication, this patch extends our PnP device interface with optional functions to enter and exit configuration mode. Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-10 22:08:35 +02:00
};
include/device/pnp.h: Don't use device_t Use of device_t is deprecated. Change-Id: I9364c9681dd89f09480368a997f6d1f04cde1488 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-19 14:42:02 +02:00
void pnp_enter_conf_mode(struct device *dev);
void pnp_exit_conf_mode(struct device *dev);
pnp: Implement common handling for PnP config modes Many super i/o chips only answer to PnP requests if they are in a configuration state (sometimes also called ext func mode). To cope with that, the code of many chips implements its own version of our default PnP functions like pnp_set_resource(), pnp_enable_resource() etc. To avoid this code duplication, this patch extends our PnP device interface with optional functions to enter and exit configuration mode. Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-10 22:08:35 +02:00
superio: Replace the indexed I/O functions Replace the multiple indexed I/O read and write functions with common functions. Change-Id: Idfe7a8784c28d51b3fbcb2f4e26beaa0b91741a8 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/10145 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-12 14:53:11 +02:00
/* PNP indexed I/O operations */
/*
* u8 pnp_read_index(u16 port, u8 reg)
* Description:
* This routine reads indexed I/O registers. The reg byte is written
* to the index register at I/O address = port. The result is then
* read from the data register at I/O address = port + 1.
*
* Parameters:
* @param[in] u16 port = The I/O address of the port index register.
* @param[in] u8 reg = The offset within the indexed space.
* @param[out] u8 result = The value read back from the data register.
*/
static inline u8 pnp_read_index(u16 port, u8 reg)
{
outb(reg, port);
return inb(port + 1);
}
/*
* void pnp_write_index(u16 port, u8 reg, u8 value)
* Description:
* This routine writes indexed I/O registers. The reg byte is written
* to the index register at I/O address = port. The value byte is then
* written to the data register at I/O address = port + 1.
*
* Parameters:
* @param[in] u16 port = The address of the port index register.
* @param[in] u8 reg = The offset within the indexed space.
* @param[in] u8 value = The value to be written to the data register.
*/
static inline void pnp_write_index(u16 port, u8 reg, u8 value)
{
outb(reg, port);
outb(value, port + 1);
}
Add directive __SIMPLE_DEVICE__ The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-25 22:17:43 +02:00
#endif /* ! __SIMPLE_DEVICE__ */
- Major cleanup of the bootpath - Changes to allow more code to be compiled both ways - Working SMP support git-svn-id: svn://svn.coreboot.org/coreboot/trunk@987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-07-19 06:28:22 +02:00
#endif /* DEVICE_PNP_H */
Reference in a new issue Copy permalink