GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/payloads/libpayload/drivers/usb/xhci.c

981 lines
28 KiB
C
Raw Normal View History

Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
/*
*
* Copyright (C) 2010 Patrick Georgi
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
* Copyright (C) 2013 secunet Security Networks AG
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
//#define XHCI_SPEW_DEBUG
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
#include <inttypes.h>
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
#include <arch/virtual.h>
#include "xhci_private.h"
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
#include "xhci.h"
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
static void xhci_start (hci_t *controller);
static void xhci_stop (hci_t *controller);
static void xhci_reset (hci_t *controller);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
static void xhci_reinit (hci_t *controller);
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
static void xhci_shutdown (hci_t *controller);
static int xhci_bulk (endpoint_t *ep, int size, u8 *data, int finalize);
static int xhci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq,
int dalen, u8 *data);
static void* xhci_create_intr_queue (endpoint_t *ep, int reqsize, int reqcount, int reqtiming);
static void xhci_destroy_intr_queue (endpoint_t *ep, void *queue);
static u8* xhci_poll_intr_queue (void *queue);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/*
* Some structures must not cross page boundaries. To get this,
* we align them by their size (or the next greater power of 2).
*/
void *
xhci_align(const size_t min_align, const size_t size)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
size_t align;
if (!(size & (size - 1)))
align = size; /* It's a power of 2 */
else
align = 1 << ((sizeof(unsigned) << 3) - __builtin_clz(size));
if (align < min_align)
align = min_align;
xhci_spew("Aligning %zu to %zu\n", size, align);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
return dma_memalign(align, size);
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
void
xhci_clear_trb(trb_t *const trb, const int pcs)
{
trb->ptr_low = 0;
trb->ptr_high = 0;
trb->status = 0;
trb->control = !pcs;
}
void
xhci_init_cycle_ring(transfer_ring_t *const tr, const size_t ring_size)
{
memset((void *)tr->ring, 0, ring_size * sizeof(*tr->ring));
TRB_SET(TT, &tr->ring[ring_size - 1], TRB_LINK);
TRB_SET(TC, &tr->ring[ring_size - 1], 1);
/* only one segment that points to itself */
tr->ring[ring_size - 1].ptr_low = virt_to_phys(tr->ring);
tr->pcs = 1;
tr->cur = tr->ring;
}
/* On Panther Point: switch ports shared with EHCI to xHCI */
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
#if CONFIG(LP_USB_PCI)
libpayload: Add init() function to hci_t and rework uhci_reset() uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12 16:20:32 +01:00
static void
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_switch_ppt_ports(pcidev_t addr)
{
if (pci_read_config32(addr, 0x00) == 0x1e318086) {
u32 reg32 = pci_read_config32(addr, 0xdc) & 0xf;
xhci_debug("Ports capable of SuperSpeed: 0x%"PRIx32"\n", reg32);
/* For now, do not enable SuperSpeed on any ports */
//pci_write_config32(addr, 0xd8, reg32);
pci_write_config32(addr, 0xd8, 0x00000000);
reg32 = pci_read_config32(addr, 0xd8) & 0xf;
xhci_debug("Configured for SuperSpeed: 0x%"PRIx32"\n", reg32);
reg32 = pci_read_config32(addr, 0xd4) & 0xf;
xhci_debug("Trying to switch over: 0x%"PRIx32"\n", reg32);
pci_write_config32(addr, 0xd0, reg32);
reg32 = pci_read_config32(addr, 0xd0) & 0xf;
xhci_debug("Actually switched over: 0x%"PRIx32"\n", reg32);
}
}
libpayload: Clean up USB build warnings There were a few build warnings in the USB driver to clean up before -Werror may be enabled. Change-Id: I220cfcf0ee926912a184a91d3ced3ba61259130e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7921 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30 06:07:04 +01:00
#endif
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
#if CONFIG(LP_USB_PCI)
libpayload: Switch xHCI shared ports back to EHCI on shutdown On Intel's Panther Point the xHCI ports are shared with an EHCI controller. Our xHCI driver switches them to xHCI, naturally. But we forgot to switch them back on shutdown, which left them unusable by a non-xHCI aware operating system. Change-Id: I70ef08655a603b42ee939935d50cf77ea97878a3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3791 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-19 14:03:47 +02:00
/* On Panther Point: switch all ports back to EHCI */
static void
xhci_switchback_ppt_ports(pcidev_t addr)
{
if (pci_read_config32(addr, 0x00) == 0x1e318086) {
u32 reg32 = pci_read_config32(addr, 0xd0) & 0xf;
xhci_debug("Switching ports back: 0x%"PRIx32"\n", reg32);
pci_write_config32(addr, 0xd0, 0x00000000);
reg32 = pci_read_config32(addr, 0xd0) & 0xf;
xhci_debug("Still switched to xHCI: 0x%"PRIx32"\n", reg32);
}
}
libpayload: Guard PCI using code appropriately in XHCI driver Make the XHCI driver compile on ARM again. The Panther Point specific shutdown handler is certainly _not_ necessary there. Change-Id: I470afd4d82d101902b119b3ead4381e2b36a94b0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10091 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-05-04 19:05:41 +02:00
#endif
libpayload: Switch xHCI shared ports back to EHCI on shutdown On Intel's Panther Point the xHCI ports are shared with an EHCI controller. Our xHCI driver switches them to xHCI, naturally. But we forgot to switch them back on shutdown, which left them unusable by a non-xHCI aware operating system. Change-Id: I70ef08655a603b42ee939935d50cf77ea97878a3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3791 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-19 14:03:47 +02:00
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
static long
xhci_handshake(volatile u32 *const reg, u32 mask, u32 wait_for, long timeout_us)
{
while ((*reg & mask) != wait_for && timeout_us--) udelay(1);
return timeout_us;
}
static int
xhci_wait_ready(xhci_t *const xhci)
libpayload: Add init() function to hci_t and rework uhci_reset() uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12 16:20:32 +01:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Waiting for controller to be ready... ");
if (!xhci_handshake(&xhci->opreg->usbsts, USBSTS_CNR, 0, 100000L)) {
usb_debug("timeout!\n");
return -1;
}
usb_debug("ok.\n");
return 0;
libpayload: Add init() function to hci_t and rework uhci_reset() uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12 16:20:32 +01:00
}
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
hci_t *
libpayload: Use unsigned long for BARs in *hci_init() Using void* for physical addresses leads to much casting and confuses developers when to convert from physical to virtual addresses or the other way around. When using plain integers for physical addresses and pointers for virtual addresses things become much cleaner and we won't ever end up dereferencing a physical address. Change-Id: I24cd53b81c7863b6d14f0cbb4ce8937728b37c1c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6244 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-07 16:33:59 +02:00
xhci_init (unsigned long physical_bar)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
int i;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* First, allocate and initialize static controller structures */
hci_t *const controller = new_controller();
controller->type = XHCI;
controller->start = xhci_start;
controller->stop = xhci_stop;
controller->reset = xhci_reset;
controller->init = xhci_reinit;
controller->shutdown = xhci_shutdown;
controller->bulk = xhci_bulk;
controller->control = xhci_control;
controller->set_address = xhci_set_address;
controller->finish_device_config= xhci_finish_device_config;
controller->destroy_device = xhci_destroy_dev;
controller->create_intr_queue = xhci_create_intr_queue;
controller->destroy_intr_queue = xhci_destroy_intr_queue;
controller->poll_intr_queue = xhci_poll_intr_queue;
libpayload: xHCI: Always initialize controller->pcidev As the controller structure is never fully cleared, this one wasn't initialized for non-pci controllers (but checked for non-null later). Change-Id: I852671c5f55650bdb6cd97f4ec74b1f95ee894c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6246 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-07 17:20:53 +02:00
controller->pcidev = 0;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
libpayload: Fix pointer related casts Fix pointer related casts since this can create a problem for 64-bit systems. BUG=None BRANCH=None TEST=Compiled successfully for link, nyan using emerge-* libpayload Original-Change-Id: I4cbd2d9f1efaaac87c3eba69204337fd6893ed66 Original-Reviewed-on: https://chromium-review.googlesource.com/199564 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 914b118a64b0691aeca463dff24252db9c24109e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I11f070ed5d3eddd8b9be30c428cb24c8439e617b Reviewed-on: http://review.coreboot.org/7905 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-05-13 22:47:32 +02:00
controller->reg_base = (uintptr_t)physical_bar;
libpayload: usb: Fix up usb_shutdown() code paths This patch combines a few minor fixes and refactoring to the various host controller and root hub drivers to ensure they all do the right thing on a call to usb_exit(). It puts a usb_detach_device(0) call into detach_controller() so that the HCD doesn't need to remember to tear down the root hub itself, and makes sure all root hubs properly detach the subtree of devices connected to their ports first (as generic_hub and by extension XHCI had already been doing). It also fixes up some missing free() calls and replaces most 'ptr = malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc(). BUG=chromium:343415 TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the changes are really tame. Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193731 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d Reviewed-on: http://review.coreboot.org/7222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-08 21:54:25 +02:00
controller->instance = xzalloc(sizeof(xhci_t));
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = (xhci_t *)controller->instance;
init_device_entry(controller, 0);
xhci->roothub = controller->devices[0];
xhci->cr.ring = xhci_align(64, COMMAND_RING_SIZE * sizeof(trb_t));
xhci->er.ring = xhci_align(64, EVENT_RING_SIZE * sizeof(trb_t));
xhci->ev_ring_table = xhci_align(64, sizeof(erst_entry_t));
if (!xhci->roothub || !xhci->cr.ring ||
!xhci->er.ring || !xhci->ev_ring_table) {
xhci_debug("Out of memory\n");
goto _free_xhci;
}
libpayload: xhci: Fix CAPREG address calculation I rushed CB:40895 in to fix a bug only to introduce another. xhci_init() no longer crashes, but it doesn't correctly initialize the XHCI controller either, and unfortunately the error messages are all hidden behind USB_DEBUG. This patch fixes the incorrect address calculation to what it was before CB:39838. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I14293e2135108db30ba6fd2efea0573fe266fa37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01 23:56:49 +02:00
xhci->capreg = phys_to_virt(physical_bar);
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
xhci->opreg = phys_to_virt(physical_bar) + CAP_GET(CAPLEN, xhci->capreg);
libpayload: xhci: Do not memcpy registers memcpy() is meant to be used on normal memory and often implemented with architecture-specific optimizations to make that as performant as possible. MMIO registers often have special access restrictions that may be incompatible with whatever memcpy() does. For example, on arm64 it uses the LDP (load pair) to load 16 bytes at a time, which makes 4-byte MMIO registers unhappy. This patch removes the caching of the XHCI capreg registers and changes it back to a pointer. The CAP_GET() macro is still accessing a full (non-bitfield) uint32_t at the end so this should still generate a 4-byte access (which was the goal of the original change in CB:39838). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id058c8813087a8e8cb85f570399e07fb8a597108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30 02:36:12 +02:00
xhci->hcrreg = phys_to_virt(physical_bar) + xhci->capreg->rtsoff;
xhci->dbreg = phys_to_virt(physical_bar) + xhci->capreg->dboff;
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
libpayload: Drop obsolete setting of reg_base in [oex]hci Setting of `controller->reg_base` is of no use here, as it is never read (in another function) later. Looks like this pattern originated from uhci.c where it makes sense. By removing the indirection through `reg_base` we also fix a possible truncation to u32. Change-Id: I5c99c5bf1f5b1d6c04bd84d87fd3e275fd7d0411 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6251 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-10 12:56:34 +02:00
xhci_debug("regbase: 0x%"PRIx32"\n", physical_bar);
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
xhci_debug("caplen: 0x%"PRIx32"\n", CAP_GET(CAPLEN, xhci->capreg));
libpayload: xhci: Do not memcpy registers memcpy() is meant to be used on normal memory and often implemented with architecture-specific optimizations to make that as performant as possible. MMIO registers often have special access restrictions that may be incompatible with whatever memcpy() does. For example, on arm64 it uses the LDP (load pair) to load 16 bytes at a time, which makes 4-byte MMIO registers unhappy. This patch removes the caching of the XHCI capreg registers and changes it back to a pointer. The CAP_GET() macro is still accessing a full (non-bitfield) uint32_t at the end so this should still generate a 4-byte access (which was the goal of the original change in CB:39838). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id058c8813087a8e8cb85f570399e07fb8a597108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30 02:36:12 +02:00
xhci_debug("rtsoff: 0x%"PRIx32"\n", xhci->capreg->rtsoff);
xhci_debug("dboff: 0x%"PRIx32"\n", xhci->capreg->dboff);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("hciversion: %"PRIx8".%"PRIx8"\n",
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
CAP_GET(CAPVER_HI, xhci->capreg), CAP_GET(CAPVER_LO, xhci->capreg));
if ((CAP_GET(CAPVER, xhci->capreg) < 0x96) ||
libpayload/drivers/usb/xhci: Allow xHCI v1.2 in libpayload The latest Intel FSP advertises xHCI v1.2 chipset support, so update libpayload to include that version. No critical changes were identified in review of the xHCI v1.2 spec, and booting from USB works with the included change as expected. BUG=b:155315876 TEST=booting from multiple USB sticks/hubs with the latest Intel FSP that advertises xHCI v1.2 Change-Id: I236fed9beef86ff5e1bf7962d882fdae5817a1ff Signed-off-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41039 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04 21:45:06 +02:00
(CAP_GET(CAPVER, xhci->capreg) > 0x120)) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Unsupported xHCI version\n");
goto _free_xhci;
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci_debug("context size: %dB\n", CTXSIZE(xhci));
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
xhci_debug("maxslots: 0x%02lx\n", CAP_GET(MAXSLOTS, xhci->capreg));
xhci_debug("maxports: 0x%02lx\n", CAP_GET(MAXPORTS, xhci->capreg));
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const unsigned pagesize = xhci->opreg->pagesize << 12;
xhci_debug("pagesize: 0x%04x\n", pagesize);
/*
* We haven't touched the hardware yet. So we allocate all dynamic
* structures at first and can still chicken out easily if we run out
* of memory.
*/
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
xhci->max_slots_en = CAP_GET(MAXSLOTS, xhci->capreg) &
CONFIG_LP_MASK_MaxSlotsEn;
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci->dcbaa = xhci_align(64, (xhci->max_slots_en + 1) * sizeof(u64));
xhci->dev = malloc((xhci->max_slots_en + 1) * sizeof(*xhci->dev));
if (!xhci->dcbaa || !xhci->dev) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Out of memory\n");
goto _free_xhci;
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
memset(xhci->dcbaa, 0x00, (xhci->max_slots_en + 1) * sizeof(u64));
memset(xhci->dev, 0x00, (xhci->max_slots_en + 1) * sizeof(*xhci->dev));
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/*
* Let dcbaa[0] point to another array of pointers, sp_ptrs.
* The pointers therein point to scratchpad buffers (pages).
*/
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
const size_t max_sp_bufs =
CAP_GET(MAX_SCRATCH_BUFS_HI, xhci->capreg) << 5 |
CAP_GET(MAX_SCRATCH_BUFS_LO, xhci->capreg);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("max scratchpad bufs: 0x%zx\n", max_sp_bufs);
if (max_sp_bufs) {
const size_t sp_ptrs_size = max_sp_bufs * sizeof(u64);
xhci->sp_ptrs = xhci_align(64, sp_ptrs_size);
if (!xhci->sp_ptrs) {
xhci_debug("Out of memory\n");
goto _free_xhci_structs;
}
memset(xhci->sp_ptrs, 0x00, sp_ptrs_size);
for (i = 0; i < max_sp_bufs; ++i) {
/* Could use mmap() here if we had it.
Maybe there is another way. */
void *const page = memalign(pagesize, pagesize);
if (!page) {
xhci_debug("Out of memory\n");
goto _free_xhci_structs;
}
xhci->sp_ptrs[i] = virt_to_phys(page);
}
xhci->dcbaa[0] = virt_to_phys(xhci->sp_ptrs);
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (dma_initialized()) {
xhci->dma_buffer = dma_memalign(64 * 1024, DMA_SIZE);
if (!xhci->dma_buffer) {
xhci_debug("Not enough memory for DMA bounce buffer\n");
goto _free_xhci_structs;
}
}
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Now start working on the hardware */
if (xhci_wait_ready(xhci))
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
goto _free_xhci_structs;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* TODO: Check if BIOS claims ownership (and hand over) */
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_reset(controller);
xhci_reinit(controller);
xhci->roothub->controller = controller;
xhci->roothub->init = xhci_rh_init;
xhci->roothub->init(xhci->roothub);
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
return controller;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
_free_xhci_structs:
libpayload: usb: Fix up usb_shutdown() code paths This patch combines a few minor fixes and refactoring to the various host controller and root hub drivers to ensure they all do the right thing on a call to usb_exit(). It puts a usb_detach_device(0) call into detach_controller() so that the HCD doesn't need to remember to tear down the root hub itself, and makes sure all root hubs properly detach the subtree of devices connected to their ports first (as generic_hub and by extension XHCI had already been doing). It also fixes up some missing free() calls and replaces most 'ptr = malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc(). BUG=chromium:343415 TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the changes are really tame. Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193731 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d Reviewed-on: http://review.coreboot.org/7222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-08 21:54:25 +02:00
free(xhci->dma_buffer);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (xhci->sp_ptrs) {
for (i = 0; i < max_sp_bufs; ++i) {
if (xhci->sp_ptrs[i])
free(phys_to_virt(xhci->sp_ptrs[i]));
}
}
free(xhci->sp_ptrs);
free(xhci->dcbaa);
_free_xhci:
free((void *)xhci->ev_ring_table);
free((void *)xhci->er.ring);
free((void *)xhci->cr.ring);
free(xhci->roothub);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
free(xhci->dev);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
free(xhci);
libpayload: Clean up USB build warnings There were a few build warnings in the USB driver to clean up before -Werror may be enabled. Change-Id: I220cfcf0ee926912a184a91d3ced3ba61259130e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7921 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30 06:07:04 +01:00
/* _free_controller: */
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
detach_controller(controller);
free(controller);
return NULL;
}
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
#if CONFIG(LP_USB_PCI)
libpayload: Add USB support for non-PCI controllers Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03 01:16:41 +02:00
hci_t *
xhci_pci_init (pcidev_t addr)
{
u32 reg_addr;
libpayload: reintroduce optional PCI in XHCI driver being a good citizen on the box, libpayload tries to return to EHCI mode on shutdown, so a non-XHCI capable USB driver after it (eg. in the OS) finds something to work with. Change-Id: Id227d646e08a258b841c644263112f0815dd486c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4547 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21 11:41:22 +01:00
hci_t *controller;
libpayload: Add USB support for non-PCI controllers Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03 01:16:41 +02:00
libpayload/drivers/usb/xhci: Replace raw values with constants BUG=none TEST=compiled on grunt and made sure USB still works in depthcharge Change-Id: I972f4604bb5ff3838cb15f323c5a579ad890ecf5 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-07 00:12:37 +02:00
reg_addr = pci_read_config32(addr, PCI_BASE_ADDRESS_0) &
PCI_BASE_ADDRESS_MEM_MASK;
if (pci_read_config32(addr, PCI_BASE_ADDRESS_1) > 0)
libpayload: Add USB support for non-PCI controllers Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03 01:16:41 +02:00
fatal("We don't do 64bit addressing.\n");
libpayload: Use unsigned long for BARs in *hci_init() Using void* for physical addresses leads to much casting and confuses developers when to convert from physical to virtual addresses or the other way around. When using plain integers for physical addresses and pointers for virtual addresses things become much cleaner and we won't ever end up dereferencing a physical address. Change-Id: I24cd53b81c7863b6d14f0cbb4ce8937728b37c1c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6244 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-07 16:33:59 +02:00
controller = xhci_init((unsigned long)reg_addr);
libpayload: Catch null-pointer dereference in xHCI Fix a possible null-pointer dereference (hopefully) before anyone runs into this. Also don't switch ports to xHCI if initialization failed. Change-Id: I5dbaeb435a98ead0b50d27fde13c9f1433ea3e81 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6245 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-07 17:11:53 +02:00
if (controller) {
lp/drivers/usb: Add quirk for QEMU XHCI root hub The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18 20:19:14 +01:00
xhci_t *xhci = controller->instance;
libpayload: Catch null-pointer dereference in xHCI Fix a possible null-pointer dereference (hopefully) before anyone runs into this. Also don't switch ports to xHCI if initialization failed. Change-Id: I5dbaeb435a98ead0b50d27fde13c9f1433ea3e81 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6245 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-07 17:11:53 +02:00
controller->pcidev = addr;
libpayload: Add USB support for non-PCI controllers Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03 01:16:41 +02:00
libpayload: Catch null-pointer dereference in xHCI Fix a possible null-pointer dereference (hopefully) before anyone runs into this. Also don't switch ports to xHCI if initialization failed. Change-Id: I5dbaeb435a98ead0b50d27fde13c9f1433ea3e81 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6245 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-07 17:11:53 +02:00
xhci_switch_ppt_ports(addr);
lp/drivers/usb: Add quirk for QEMU XHCI root hub The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18 20:19:14 +01:00
/* Set up any quirks for controller root hub */
xhci->roothub->quirks = pci_quirk_check(addr);
libpayload: Catch null-pointer dereference in xHCI Fix a possible null-pointer dereference (hopefully) before anyone runs into this. Also don't switch ports to xHCI if initialization failed. Change-Id: I5dbaeb435a98ead0b50d27fde13c9f1433ea3e81 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6245 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-07 17:11:53 +02:00
}
libpayload: Add USB support for non-PCI controllers Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03 01:16:41 +02:00
return controller;
}
#endif
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
static void
xhci_reset(hci_t *const controller)
{
xhci_t *const xhci = XHCI_INST(controller);
xhci_stop(controller);
xhci->opreg->usbcmd |= USBCMD_HCRST;
libpayload: xhci: Add delay to get reset working more reliably Existing Intel xHCI controllers require a delay of 1 ms, after setting the CMD_RESET bit in command register, before accessing any HC registers. This allows the HC to complete the reset operation and be ready for HC register access. Without this delay, the subsequent HC register access, may result in a system hang, very rarely. Verified CherryView / Braswell platforms go through over 1000 warm reboot cycles (which was not possible without this patch), without any xHCI reset hang in depthcharge. BRANCH=None BUG=None TEST=Verified CherryView / Braswell platforms go through over 1000 warm reboot cycles, without any xHCI reset hang in depthcharge. Change-Id: I8eff5115ca52738bdcf8bc65fbfb2a5f60a0abe1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3e7ea70df36e3bf35a6ee1297640900ee76bfdac Original-Change-Id: Id681a19d0eedb0e2c29e259c5467bcde577e3460 Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310022 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12325 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-31 01:00:24 +01:00
/* Existing Intel xHCI controllers require a delay of 1 ms,
* after setting the CMD_RESET bit, and before accessing any
* HC registers. This allows the HC to complete the
* reset operation and be ready for HC register access.
* Without this delay, the subsequent HC register access,
* may result in a system hang very rarely.
*/
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
if (CONFIG(LP_ARCH_X86))
libpayload: xhci: Add delay to get reset working more reliably Existing Intel xHCI controllers require a delay of 1 ms, after setting the CMD_RESET bit in command register, before accessing any HC registers. This allows the HC to complete the reset operation and be ready for HC register access. Without this delay, the subsequent HC register access, may result in a system hang, very rarely. Verified CherryView / Braswell platforms go through over 1000 warm reboot cycles (which was not possible without this patch), without any xHCI reset hang in depthcharge. BRANCH=None BUG=None TEST=Verified CherryView / Braswell platforms go through over 1000 warm reboot cycles, without any xHCI reset hang in depthcharge. Change-Id: I8eff5115ca52738bdcf8bc65fbfb2a5f60a0abe1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3e7ea70df36e3bf35a6ee1297640900ee76bfdac Original-Change-Id: Id681a19d0eedb0e2c29e259c5467bcde577e3460 Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310022 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12325 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-31 01:00:24 +01:00
mdelay(1);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Resetting controller... ");
if (!xhci_handshake(&xhci->opreg->usbcmd, USBCMD_HCRST, 0, 1000000L))
usb_debug("timeout!\n");
else
usb_debug("ok.\n");
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
static void
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_reinit (hci_t *controller)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = XHCI_INST(controller);
if (xhci_wait_ready(xhci))
return;
/* Enable all available slots */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci->opreg->config = xhci->max_slots_en;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Set DCBAA */
xhci->opreg->dcbaap_lo = virt_to_phys(xhci->dcbaa);
xhci->opreg->dcbaap_hi = 0;
/* Initialize command ring */
xhci_init_cycle_ring(&xhci->cr, COMMAND_RING_SIZE);
xhci_debug("command ring @%p (0x%08x)\n",
xhci->cr.ring, virt_to_phys(xhci->cr.ring));
xhci->opreg->crcr_lo = virt_to_phys(xhci->cr.ring) | CRCR_RCS;
xhci->opreg->crcr_hi = 0;
/* Make sure interrupts are disabled */
xhci->opreg->usbcmd &= ~USBCMD_INTE;
/* Initialize event ring */
xhci_reset_event_ring(&xhci->er);
xhci_debug("event ring @%p (0x%08x)\n",
xhci->er.ring, virt_to_phys(xhci->er.ring));
xhci_debug("ERST Max: 0x%lx -> 0x%lx entries\n",
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
CAP_GET(ERST_MAX, xhci->capreg),
1 << CAP_GET(ERST_MAX, xhci->capreg));
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
memset((void*)xhci->ev_ring_table, 0x00, sizeof(erst_entry_t));
xhci->ev_ring_table[0].seg_base_lo = virt_to_phys(xhci->er.ring);
xhci->ev_ring_table[0].seg_base_hi = 0;
xhci->ev_ring_table[0].seg_size = EVENT_RING_SIZE;
libpayload: usb: Support MTK xHCI host controller 1. There is a mis-understanding to calculate the value of TD Size in Normal TRB. For MTK's xHCI controller it defines a number of packets that remain to be transferred for a TD after processing all Max packets in all previous TRBs, that means don't include the current TRB's. 2. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK architecture defines some extra SW scheduling parameters for HW. According to these parameters provided by SW, the xHC can easily decide whether a synchronous endpoint should be scheduled in a specific uFrame. The extra SW scheduling parameters are put into reserved DWs in Slot and Endpoint Context. But in coreboot synchronous transfer can be ignored, so only two fields are set to a default value 1 to support bulk and interrupt transfers, and others are set to zero. 3. For control transfer, it is better to read back doorbell register or add a memory barrier after ringing the doorbell to flush posted write. Otherwise the first command will be aborted on MTK's xHCI controller. 4. Before send commands to a port, the Port Power in PORTSC register should be set to 1 on MTK's xHCI so a hook function of enable_port in generic_hub_ops_t struct is provided. Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41 Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/265362 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-07 09:36:04 +02:00
/* pass event ring table to hardware */
wmb();
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Initialize primary interrupter */
xhci->hcrreg->intrrs[0].erstsz = 1;
xhci_update_event_dq(xhci);
/* erstba has to be written at last */
xhci->hcrreg->intrrs[0].erstba_lo = virt_to_phys(xhci->ev_ring_table);
xhci->hcrreg->intrrs[0].erstba_hi = 0;
xhci_start(controller);
#ifdef USB_DEBUG
int i;
for (i = 0; i < 32; ++i) {
xhci_debug("NOOP run #%d\n", i);
trb_t *const cmd = xhci_next_command_trb(xhci);
TRB_SET(TT, cmd, TRB_CMD_NOOP);
xhci_post_command(xhci);
/* Wait for result in event ring */
libpayload/xhci: Check noop return code when debugging Make it obvious that the command has failed. BUG=b:76831439 TEST=Verified on grunt Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-16 17:21:11 +02:00
int cc = xhci_wait_for_command_done(xhci, cmd, 1);
xhci_debug("Command ring is %srunning: cc: %d\n",
(xhci->opreg->crcr_lo & CRCR_CRR) ? "" : "not ", cc);
if (cc != CC_SUCCESS)
xhci_debug("noop command failed.\n");
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
#endif
}
static void
xhci_shutdown(hci_t *const controller)
{
int i;
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
if (controller == 0)
return;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
detach_controller(controller);
libpayload: usb: Fix up usb_shutdown() code paths This patch combines a few minor fixes and refactoring to the various host controller and root hub drivers to ensure they all do the right thing on a call to usb_exit(). It puts a usb_detach_device(0) call into detach_controller() so that the HCD doesn't need to remember to tear down the root hub itself, and makes sure all root hubs properly detach the subtree of devices connected to their ports first (as generic_hub and by extension XHCI had already been doing). It also fixes up some missing free() calls and replaces most 'ptr = malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc(). BUG=chromium:343415 TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the changes are really tame. Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193731 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d Reviewed-on: http://review.coreboot.org/7222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-08 21:54:25 +02:00
xhci_t *const xhci = XHCI_INST(controller);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_stop(controller);
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
#if CONFIG(LP_USB_PCI)
libpayload: reintroduce optional PCI in XHCI driver being a good citizen on the box, libpayload tries to return to EHCI mode on shutdown, so a non-XHCI capable USB driver after it (eg. in the OS) finds something to work with. Change-Id: Id227d646e08a258b841c644263112f0815dd486c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4547 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21 11:41:22 +01:00
if (controller->pcidev)
xhci_switchback_ppt_ports(controller->pcidev);
libpayload: Guard PCI using code appropriately in XHCI driver Make the XHCI driver compile on ARM again. The Panther Point specific shutdown handler is certainly _not_ necessary there. Change-Id: I470afd4d82d101902b119b3ead4381e2b36a94b0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10091 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-05-04 19:05:41 +02:00
#endif
libpayload: Switch xHCI shared ports back to EHCI on shutdown On Intel's Panther Point the xHCI ports are shared with an EHCI controller. Our xHCI driver switches them to xHCI, naturally. But we forgot to switch them back on shutdown, which left them unusable by a non-xHCI aware operating system. Change-Id: I70ef08655a603b42ee939935d50cf77ea97878a3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3791 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-19 14:03:47 +02:00
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (xhci->sp_ptrs) {
lp/drivers/usb: Work around QEMU XHCI register issue The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18 03:32:14 +01:00
const size_t max_sp_bufs =
CAP_GET(MAX_SCRATCH_BUFS_HI, xhci->capreg) << 5 |
CAP_GET(MAX_SCRATCH_BUFS_LO, xhci->capreg);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
for (i = 0; i < max_sp_bufs; ++i) {
if (xhci->sp_ptrs[i])
free(phys_to_virt(xhci->sp_ptrs[i]));
}
}
free(xhci->sp_ptrs);
libpayload: usb: Fix up usb_shutdown() code paths This patch combines a few minor fixes and refactoring to the various host controller and root hub drivers to ensure they all do the right thing on a call to usb_exit(). It puts a usb_detach_device(0) call into detach_controller() so that the HCD doesn't need to remember to tear down the root hub itself, and makes sure all root hubs properly detach the subtree of devices connected to their ports first (as generic_hub and by extension XHCI had already been doing). It also fixes up some missing free() calls and replaces most 'ptr = malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc(). BUG=chromium:343415 TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the changes are really tame. Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193731 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d Reviewed-on: http://review.coreboot.org/7222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-08 21:54:25 +02:00
free(xhci->dma_buffer);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
free(xhci->dcbaa);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
free(xhci->dev);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
free((void *)xhci->ev_ring_table);
free((void *)xhci->er.ring);
free((void *)xhci->cr.ring);
free(xhci);
free(controller);
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
static void
xhci_start (hci_t *controller)
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = XHCI_INST(controller);
xhci->opreg->usbcmd |= USBCMD_RS;
if (!xhci_handshake(&xhci->opreg->usbsts, USBSTS_HCH, 0, 1000000L))
xhci_debug("Controller didn't start within 1s\n");
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
static void
xhci_stop (hci_t *controller)
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = XHCI_INST(controller);
xhci->opreg->usbcmd &= ~USBCMD_RS;
if (!xhci_handshake(&xhci->opreg->usbsts,
USBSTS_HCH, USBSTS_HCH, 1000000L))
xhci_debug("Controller didn't halt within 1s\n");
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
static int
libpayload: usb: xhci: Fix STALL endpoint handling - Remove the call to clear_stall in xhci_reset_endpoint because we will call clear_stall from the mass-storage driver. - Remove the xhci_reset_endpoint call from xhci_bulk on STALL since we will reset on the next transfer anyway. - Remove the clear_halt parameter from xhci_bulk since it's now unused. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I852b87621861109e596ec24b78a8f036d796ff14 Reviewed-on: https://chromium-review.googlesource.com/192866 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit e67e4f0545cbdc074328c83c7edccf9e712cd7be) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7011 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-04-02 18:14:32 +02:00
xhci_reset_endpoint(usbdev_t *const dev, endpoint_t *const ep)
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
{
xhci_t *const xhci = XHCI_INST(dev->controller);
const int slot_id = dev->address;
const int ep_id = ep ? xhci_ep_id(ep) : 1;
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
epctx_t *const epctx = xhci->dev[slot_id].ctx.ep[ep_id];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Resetting ID %d EP %d (ep state: %d)\n",
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
slot_id, ep_id, EC_GET(STATE, epctx));
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Run Reset Endpoint Command if the EP is in Halted state */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (EC_GET(STATE, epctx) == 2) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int cc = xhci_cmd_reset_endpoint(xhci, slot_id, ep_id);
if (cc != CC_SUCCESS) {
xhci_debug("Reset Endpoint Command failed: %d\n", cc);
return 1;
}
}
/* Clear TT buffer for bulk and control endpoints behind a TT */
const int hub = dev->hub;
if (hub && dev->speed < HIGH_SPEED &&
dev->controller->devices[hub]->speed == HIGH_SPEED)
/* TODO */;
/* Reset transfer ring if the endpoint is in the right state */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const unsigned ep_state = EC_GET(STATE, epctx);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (ep_state == 3 || ep_state == 4) {
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr =
xhci->dev[slot_id].transfer_rings[ep_id];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int cc = xhci_cmd_set_tr_dq(xhci, slot_id, ep_id,
tr->ring, 1);
if (cc != CC_SUCCESS) {
xhci_debug("Set TR Dequeue Command failed: %d\n", cc);
return 1;
}
xhci_init_cycle_ring(tr, TRANSFER_RING_SIZE);
}
xhci_debug("Finished resetting ID %d EP %d (ep state: %d)\n",
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
slot_id, ep_id, EC_GET(STATE, epctx));
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
return 0;
}
static void
xhci_enqueue_trb(transfer_ring_t *const tr)
{
const int chain = TRB_GET(CH, tr->cur);
TRB_SET(C, tr->cur, tr->pcs);
++tr->cur;
while (TRB_GET(TT, tr->cur) == TRB_LINK) {
xhci_spew("Handling LINK pointer\n");
const int tc = TRB_GET(TC, tr->cur);
TRB_SET(CH, tr->cur, chain);
libpayload: usb: Support MTK xHCI host controller 1. There is a mis-understanding to calculate the value of TD Size in Normal TRB. For MTK's xHCI controller it defines a number of packets that remain to be transferred for a TD after processing all Max packets in all previous TRBs, that means don't include the current TRB's. 2. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK architecture defines some extra SW scheduling parameters for HW. According to these parameters provided by SW, the xHC can easily decide whether a synchronous endpoint should be scheduled in a specific uFrame. The extra SW scheduling parameters are put into reserved DWs in Slot and Endpoint Context. But in coreboot synchronous transfer can be ignored, so only two fields are set to a default value 1 to support bulk and interrupt transfers, and others are set to zero. 3. For control transfer, it is better to read back doorbell register or add a memory barrier after ringing the doorbell to flush posted write. Otherwise the first command will be aborted on MTK's xHCI controller. 4. Before send commands to a port, the Port Power in PORTSC register should be set to 1 on MTK's xHCI so a hook function of enable_port in generic_hub_ops_t struct is provided. Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41 Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/265362 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-07 09:36:04 +02:00
wmb();
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
TRB_SET(C, tr->cur, tr->pcs);
tr->cur = phys_to_virt(tr->cur->ptr_low);
if (tc)
tr->pcs ^= 1;
}
}
libpayload: usb: xhci: Support rockchip xHCI controller 1. Make the xHCI driver to support xHCI controller v1.1 2. And a new function xhci_ring_doorbell(), it aims to add a memory barrier before ringing the doorbell, to ensure all TRB changes are written to memory. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB on Kevin rk3399 platform Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c21e92 Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/346831 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15111 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-05-24 13:40:46 +02:00
static void
xhci_ring_doorbell(endpoint_t *const ep)
{
/* Ensure all TRB changes are written to memory. */
wmb();
XHCI_INST(ep->dev->controller)->dbreg[ep->dev->address] =
xhci_ep_id(ep);
}
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
static void
xhci_enqueue_td(transfer_ring_t *const tr, const int ep, const size_t mps,
const int dalen, void *const data, const int dir)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
trb_t *trb = NULL; /* cur TRB */
u8 *cur_start = data; /* cur data pointer */
size_t length = dalen; /* remaining bytes */
size_t packets = (length + mps - 1) / mps; /* remaining packets */
size_t residue = 0; /* residue from last TRB */
size_t trb_count = 0; /* TRBs added so far */
while (length || !trb_count /* enqueue at least one */) {
const size_t cur_end = ((size_t)cur_start + 0x10000) & ~0xffff;
size_t cur_length = cur_end - (size_t)cur_start;
if (length < cur_length) {
cur_length = length;
packets = 0;
length = 0;
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
} else if (!CONFIG(LP_USB_XHCI_MTK_QUIRK)) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
packets -= (residue + cur_length) / mps;
residue = (residue + cur_length) % mps;
length -= cur_length;
}
trb = tr->cur;
xhci_clear_trb(trb, tr->pcs);
trb->ptr_low = virt_to_phys(cur_start);
TRB_SET(TL, trb, cur_length);
libpayload: usb: xhci: Fix TD size if it overflows 5 bits xHCI Spec says TD Size (5 bits) field shall be forced to 31, if the number of packets to be scheduled is greater than 31. BUG=chrome-os-partner:27837 BRANCH=rambi,nyan TEST=Manual: Ensure recovery boot with USB 2.0 media on Squawks works fine without any babble errors. Original-Change-Id: Iff14000e2a0ca1b28c49d0da921dbb2a350a1bbd Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Original-Originally-Reviewed-on: https://chromium-review.googlesource.com/202297 Original-Reviewed-on: https://chromium-review.googlesource.com/202330 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Tested-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit ae58b99370df3a86bf15d84b97db858a968b1dbd) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9668b947f676c109fad9297e5efde91bf7f796fd Reviewed-on: http://review.coreboot.org/7913 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-05-30 22:06:01 +02:00
TRB_SET(TDS, trb, MIN(TRB_MAX_TD_SIZE, packets));
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
TRB_SET(CH, trb, 1);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06 01:55:15 +01:00
if (length && CONFIG(LP_USB_XHCI_MTK_QUIRK)) {
libpayload: usb: Support MTK xHCI host controller 1. There is a mis-understanding to calculate the value of TD Size in Normal TRB. For MTK's xHCI controller it defines a number of packets that remain to be transferred for a TD after processing all Max packets in all previous TRBs, that means don't include the current TRB's. 2. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK architecture defines some extra SW scheduling parameters for HW. According to these parameters provided by SW, the xHC can easily decide whether a synchronous endpoint should be scheduled in a specific uFrame. The extra SW scheduling parameters are put into reserved DWs in Slot and Endpoint Context. But in coreboot synchronous transfer can be ignored, so only two fields are set to a default value 1 to support bulk and interrupt transfers, and others are set to zero. 3. For control transfer, it is better to read back doorbell register or add a memory barrier after ringing the doorbell to flush posted write. Otherwise the first command will be aborted on MTK's xHCI controller. 4. Before send commands to a port, the Port Power in PORTSC register should be set to 1 on MTK's xHCI so a hook function of enable_port in generic_hub_ops_t struct is provided. Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41 Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/265362 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-07 09:36:04 +02:00
/*
* For MTK's xHCI controller, TDS defines a number of
* packets that remain to be transferred for a TD after
* processing all Max packets in all previous TRBs, that
* means don't include the current TRB's.
*/
packets -= (residue + cur_length) / mps;
residue = (residue + cur_length) % mps;
length -= cur_length;
}
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Check for first, data stage TRB */
if (!trb_count && ep == 1) {
TRB_SET(DIR, trb, dir);
TRB_SET(TT, trb, TRB_DATA_STAGE);
} else {
TRB_SET(TT, trb, TRB_NORMAL);
}
libpayload: usb: xhci: set ENT flag in last Normal TRB If a TD is comprised of one or more Normal TRBs and terminated with an Event Data TRB, then the transition to the Idle state (and associated Stream state save) could occur after all the data for the TD has been moved (e.g. after Transfer Event TRBs have been executed), but before the Event Data TRB is executed. Under these conditions, the execution of the Event Data TRB is necessary to complete the TD, otherwise it does not occur until the next time the Stream is scheduled. This could lead to the lock up. The Evaluate Next TRB(ENT) flag provides a means of forcing the execution of a terminating Event Data TRB. Setting ENT flag in last Normal TRB makes the xHC to evaluate the Even Data TRB. BUG=chrome-os-partner:29375 TEST=Verified kernel boot-up on storm from previously failing USB stick. USB stick model: Sandisk Ultra USB 3.0 Pen Drive 32 GB Strontium Jet USB 3.0 Pen Drive 32 GB Change-Id: I092e2109c55c2274239c493cb67b47d730304ed2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7eefb3b2858c841165ae839d349d2a0be50fbcc8 Original-Change-Id: I4e123577ec5a5996d87d2fc52cb6cf5c571c9fae Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220123 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/8736 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-09-24 12:44:45 +02:00
/*
* This is a workaround for Synopsys DWC3. If the ENT flag is
* not set for the Normal and Data Stage TRBs. We get Event TRB
* with length 0x20d from the controller when we enqueue a TRB
* for the IN endpoint with length 0x200.
*/
if (!length)
TRB_SET(ENT, trb, 1);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_enqueue_trb(tr);
cur_start += cur_length;
++trb_count;
}
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
trb = tr->cur;
xhci_clear_trb(trb, tr->pcs);
trb->ptr_low = virt_to_phys(trb); /* for easier debugging only */
TRB_SET(TT, trb, TRB_EVENT_DATA);
TRB_SET(IOC, trb, 1);
xhci_enqueue_trb(tr);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
static int
xhci_control(usbdev_t *const dev, const direction_t dir,
const int drlen, void *const devreq,
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const int dalen, unsigned char *const src)
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
{
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
unsigned char *data = src;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = XHCI_INST(dev->controller);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
epctx_t *const epctx = xhci->dev[dev->address].ctx.ep0;
transfer_ring_t *const tr = xhci->dev[dev->address].transfer_rings[1];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const size_t off = (size_t)data & 0xffff;
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
if ((off + dalen) > ((TRANSFER_RING_SIZE - 4) << 16)) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Unsupported transfer size\n");
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
libpayload: xhci: Ensure to reset dequeue pointer on stopped endpoints This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD times out before the last TRB is processed. The driver will correctly issue a Stop Endpoint command in that case, but the xHC will still preserve the transfer state and just pick up right after that on the next doorbell ring. It will then process the leftover TRBs from the old TD the next time a transfer is issued. (cf. XHCI 4.6.9) We fix this by changing the existing xhci_reset_endpoint() calls in transfer functions to not only trigger on Halted (2) and Error (4), but also on Stopped (3). That function will not actually issue a Reset Endpoint command in this case, but it will nuke the whole transfer ring and issue a Set TR Dequeue Pointer command, which is sufficient (though slightly overkill) to solve our problem. Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170833 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6787 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-09-27 00:13:44 +02:00
/* Reset endpoint if it's not running */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const unsigned ep_state = EC_GET(STATE, epctx);
libpayload: xhci: Ensure to reset dequeue pointer on stopped endpoints This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD times out before the last TRB is processed. The driver will correctly issue a Stop Endpoint command in that case, but the xHC will still preserve the transfer state and just pick up right after that on the next doorbell ring. It will then process the leftover TRBs from the old TD the next time a transfer is issued. (cf. XHCI 4.6.9) We fix this by changing the existing xhci_reset_endpoint() calls in transfer functions to not only trigger on Halted (2) and Error (4), but also on Stopped (3). That function will not actually issue a Reset Endpoint command in this case, but it will nuke the whole transfer ring and issue a Set TR Dequeue Pointer command, which is sufficient (though slightly overkill) to solve our problem. Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170833 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6787 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-09-27 00:13:44 +02:00
if (ep_state > 1) {
libpayload: usb: xhci: Fix STALL endpoint handling - Remove the call to clear_stall in xhci_reset_endpoint because we will call clear_stall from the mass-storage driver. - Remove the xhci_reset_endpoint call from xhci_bulk on STALL since we will reset on the next transfer anyway. - Remove the clear_halt parameter from xhci_bulk since it's now unused. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I852b87621861109e596ec24b78a8f036d796ff14 Reviewed-on: https://chromium-review.googlesource.com/192866 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit e67e4f0545cbdc074328c83c7edccf9e712cd7be) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7011 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-04-02 18:14:32 +02:00
if (xhci_reset_endpoint(dev, NULL))
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (dalen && !dma_coherent(src)) {
data = xhci->dma_buffer;
if (dalen > DMA_SIZE) {
xhci_debug("Control transfer too large: %d\n", dalen);
return -1;
}
if (dir == OUT)
memcpy(data, src, dalen);
}
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Fill and enqueue setup TRB */
trb_t *const setup = tr->cur;
xhci_clear_trb(setup, tr->pcs);
setup->ptr_low = ((u32 *)devreq)[0];
setup->ptr_high = ((u32 *)devreq)[1];
TRB_SET(TL, setup, 8);
TRB_SET(TRT, setup, (dalen)
? ((dir == OUT) ? TRB_TRT_OUT_DATA : TRB_TRT_IN_DATA)
: TRB_TRT_NO_DATA);
TRB_SET(TT, setup, TRB_SETUP_STAGE);
TRB_SET(IDT, setup, 1);
TRB_SET(IOC, setup, 1);
xhci_enqueue_trb(tr);
/* Fill and enqueue data TRBs (if any) */
if (dalen) {
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const unsigned mps = EC_GET(MPS, epctx);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const unsigned dt_dir = (dir == OUT) ? TRB_DIR_OUT : TRB_DIR_IN;
xhci_enqueue_td(tr, 1, mps, dalen, data, dt_dir);
}
/* Fill status TRB */
trb_t *const status = tr->cur;
xhci_clear_trb(status, tr->pcs);
TRB_SET(DIR, status, (dir == OUT) ? TRB_DIR_IN : TRB_DIR_OUT);
TRB_SET(TT, status, TRB_STATUS_STAGE);
TRB_SET(IOC, status, 1);
xhci_enqueue_trb(tr);
/* Ring doorbell for EP0 */
libpayload: usb: xhci: Support rockchip xHCI controller 1. Make the xHCI driver to support xHCI controller v1.1 2. And a new function xhci_ring_doorbell(), it aims to add a memory barrier before ringing the doorbell, to ensure all TRB changes are written to memory. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB on Kevin rk3399 platform Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c21e92 Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/346831 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15111 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-05-24 13:40:46 +02:00
xhci_ring_doorbell(&dev->endpoints[0]);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Wait for transfer events */
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
int i, transferred = 0;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int n_stages = 2 + !!dalen;
for (i = 0; i < n_stages; ++i) {
const int ret = xhci_wait_for_transfer(xhci, dev->address, 1);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
transferred += ret;
if (ret < 0) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (ret == TIMEOUT) {
xhci_debug("Stopping ID %d EP 1\n",
dev->address);
xhci_cmd_stop_endpoint(xhci, dev->address, 1);
}
xhci_debug("Stage %d/%d failed: %d\n"
" trb ring: @%p\n"
" setup trb: @%p\n"
" status trb: @%p\n"
" ep state: %d -> %d\n"
" usbsts: 0x%08"PRIx32"\n",
i, n_stages, ret,
tr->ring, setup, status,
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
ep_state, EC_GET(STATE, epctx),
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci->opreg->usbsts);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return ret;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (dir == IN && data != src)
memcpy(src, data, transferred);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return transferred;
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
/* finalize == 1: if data is of packet aligned size, add a zero length packet */
static int
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci_bulk(endpoint_t *const ep, const int size, u8 *const src,
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int finalize)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* finalize: Hopefully the xHCI controller always does this.
We have no control over the packets. */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
u8 *data = src;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const int slot_id = ep->dev->address;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int ep_id = xhci_ep_id(ep);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
epctx_t *const epctx = xhci->dev[slot_id].ctx.ep[ep_id];
transfer_ring_t *const tr = xhci->dev[slot_id].transfer_rings[ep_id];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const size_t off = (size_t)data & 0xffff;
libpayload: xhci: Use Event Data TRBs for transfer event generation The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-27 21:45:11 +02:00
if ((off + size) > ((TRANSFER_RING_SIZE - 2) << 16)) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Unsupported transfer size\n");
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (!dma_coherent(src)) {
data = xhci->dma_buffer;
if (size > DMA_SIZE) {
xhci_debug("Bulk transfer too large: %d\n", size);
return -1;
}
if (ep->direction == OUT)
memcpy(data, src, size);
}
libpayload: xhci: Ensure to reset dequeue pointer on stopped endpoints This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD times out before the last TRB is processed. The driver will correctly issue a Stop Endpoint command in that case, but the xHC will still preserve the transfer state and just pick up right after that on the next doorbell ring. It will then process the leftover TRBs from the old TD the next time a transfer is issued. (cf. XHCI 4.6.9) We fix this by changing the existing xhci_reset_endpoint() calls in transfer functions to not only trigger on Halted (2) and Error (4), but also on Stopped (3). That function will not actually issue a Reset Endpoint command in this case, but it will nuke the whole transfer ring and issue a Set TR Dequeue Pointer command, which is sufficient (though slightly overkill) to solve our problem. Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170833 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6787 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-09-27 00:13:44 +02:00
/* Reset endpoint if it's not running */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const unsigned ep_state = EC_GET(STATE, epctx);
libpayload: xhci: Ensure to reset dequeue pointer on stopped endpoints This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD times out before the last TRB is processed. The driver will correctly issue a Stop Endpoint command in that case, but the xHC will still preserve the transfer state and just pick up right after that on the next doorbell ring. It will then process the leftover TRBs from the old TD the next time a transfer is issued. (cf. XHCI 4.6.9) We fix this by changing the existing xhci_reset_endpoint() calls in transfer functions to not only trigger on Halted (2) and Error (4), but also on Stopped (3). That function will not actually issue a Reset Endpoint command in this case, but it will nuke the whole transfer ring and issue a Set TR Dequeue Pointer command, which is sufficient (though slightly overkill) to solve our problem. Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170833 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6787 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-09-27 00:13:44 +02:00
if (ep_state > 1) {
libpayload: usb: xhci: Fix STALL endpoint handling - Remove the call to clear_stall in xhci_reset_endpoint because we will call clear_stall from the mass-storage driver. - Remove the xhci_reset_endpoint call from xhci_bulk on STALL since we will reset on the next transfer anyway. - Remove the clear_halt parameter from xhci_bulk since it's now unused. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I852b87621861109e596ec24b78a8f036d796ff14 Reviewed-on: https://chromium-review.googlesource.com/192866 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit e67e4f0545cbdc074328c83c7edccf9e712cd7be) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7011 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-04-02 18:14:32 +02:00
if (xhci_reset_endpoint(ep->dev, ep))
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return -1;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
/* Enqueue transfer and ring doorbell */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const unsigned mps = EC_GET(MPS, epctx);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const unsigned dir = (ep->direction == OUT) ? TRB_DIR_OUT : TRB_DIR_IN;
xhci_enqueue_td(tr, ep_id, mps, size, data, dir);
libpayload: usb: xhci: Support rockchip xHCI controller 1. Make the xHCI driver to support xHCI controller v1.1 2. And a new function xhci_ring_doorbell(), it aims to add a memory barrier before ringing the doorbell, to ensure all TRB changes are written to memory. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB on Kevin rk3399 platform Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c21e92 Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/346831 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15111 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-05-24 13:40:46 +02:00
xhci_ring_doorbell(ep);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Wait for transfer event */
const int ret = xhci_wait_for_transfer(xhci, ep->dev->address, ep_id);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
if (ret < 0) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (ret == TIMEOUT) {
xhci_debug("Stopping ID %d EP %d\n",
ep->dev->address, ep_id);
xhci_cmd_stop_endpoint(xhci, ep->dev->address, ep_id);
}
xhci_debug("Bulk transfer failed: %d\n"
" ep state: %d -> %d\n"
" usbsts: 0x%08"PRIx32"\n",
ret, ep_state,
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
EC_GET(STATE, epctx),
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci->opreg->usbsts);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return ret;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (ep->direction == IN && data != src)
memcpy(src, data, ret);
libpayload: Make USB transfer functions return amount of bytes The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-21 22:41:40 +01:00
return ret;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
}
static trb_t *
xhci_next_trb(trb_t *cur, int *const pcs)
{
++cur;
while (TRB_GET(TT, cur) == TRB_LINK) {
if (pcs && TRB_GET(TC, cur))
*pcs ^= 1;
cur = phys_to_virt(cur->ptr_low);
}
return cur;
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
/* create and hook-up an intr queue into device schedule */
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
static void *
xhci_create_intr_queue(endpoint_t *const ep,
const int reqsize, const int reqcount,
const int reqtiming)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* reqtiming: We ignore it and use the interval from the
endpoint descriptor configured earlier. */
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const int slot_id = ep->dev->address;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int ep_id = xhci_ep_id(ep);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr = xhci->dev[slot_id].transfer_rings[ep_id];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (reqcount > (TRANSFER_RING_SIZE - 2)) {
xhci_debug("reqcount is too high, at most %d supported\n",
TRANSFER_RING_SIZE - 2);
return NULL;
}
if (reqsize > 0x10000) {
xhci_debug("reqsize is too large, at most 64KiB supported\n");
return NULL;
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (xhci->dev[slot_id].interrupt_queues[ep_id]) {
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_debug("Only one interrupt queue per endpoint supported\n");
return NULL;
}
/* Allocate intrq structure and reqdata chunks */
intrq_t *const intrq = malloc(sizeof(*intrq));
if (!intrq) {
xhci_debug("Out of memory\n");
return NULL;
}
int i;
int pcs = tr->pcs;
trb_t *cur = tr->cur;
for (i = 0; i < reqcount; ++i) {
if (TRB_GET(C, cur) == pcs) {
xhci_debug("Not enough empty TRBs\n");
goto _free_return;
}
void *const reqdata = xhci_align(1, reqsize);
if (!reqdata) {
xhci_debug("Out of memory\n");
goto _free_return;
}
xhci_clear_trb(cur, pcs);
cur->ptr_low = virt_to_phys(reqdata);
cur->ptr_high = 0;
TRB_SET(TL, cur, reqsize);
TRB_SET(TT, cur, TRB_NORMAL);
TRB_SET(ISP, cur, 1);
TRB_SET(IOC, cur, 1);
cur = xhci_next_trb(cur, &pcs);
}
intrq->size = reqsize;
intrq->count = reqcount;
intrq->next = tr->cur;
intrq->ready = NULL;
intrq->ep = ep;
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci->dev[slot_id].interrupt_queues[ep_id] = intrq;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Now enqueue all the prepared TRBs but the last
and ring the doorbell. */
for (i = 0; i < (reqcount - 1); ++i)
xhci_enqueue_trb(tr);
libpayload: usb: xhci: Support rockchip xHCI controller 1. Make the xHCI driver to support xHCI controller v1.1 2. And a new function xhci_ring_doorbell(), it aims to add a memory barrier before ringing the doorbell, to ensure all TRB changes are written to memory. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB on Kevin rk3399 platform Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c21e92 Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/346831 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15111 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-05-24 13:40:46 +02:00
xhci_ring_doorbell(ep);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
return intrq;
_free_return:
cur = tr->cur;
for (--i; i >= 0; --i) {
free(phys_to_virt(cur->ptr_low));
cur = xhci_next_trb(cur, NULL);
}
free(intrq);
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
return NULL;
}
/* remove queue from device schedule, dropping all data that came in */
static void
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_destroy_intr_queue(endpoint_t *const ep, void *const q)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
const int slot_id = ep->dev->address;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
const int ep_id = xhci_ep_id(ep);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr = xhci->dev[slot_id].transfer_rings[ep_id];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
intrq_t *const intrq = (intrq_t *)q;
/* Make sure the endpoint is stopped */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
if (EC_GET(STATE, xhci->dev[slot_id].ctx.ep[ep_id]) == 1) {
const int cc = xhci_cmd_stop_endpoint(xhci, slot_id, ep_id);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (cc != CC_SUCCESS)
xhci_debug("Warning: Failed to stop endpoint\n");
}
/* Process all remaining transfer events */
xhci_handle_events(xhci);
/* Free all pending transfers and the interrupt queue structure */
int i;
for (i = 0; i < intrq->count; ++i) {
free(phys_to_virt(intrq->next->ptr_low));
intrq->next = xhci_next_trb(intrq->next, NULL);
}
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci->dev[slot_id].interrupt_queues[ep_id] = NULL;
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
free((void *)intrq);
/* Reset the controller's dequeue pointer and reinitialize the ring */
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
xhci_cmd_set_tr_dq(xhci, slot_id, ep_id, tr->ring, 1);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
xhci_init_cycle_ring(tr, TRANSFER_RING_SIZE);
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}
/* read one intr-packet from queue, if available. extend the queue for new input.
return NULL if nothing new available.
Recommended use: while (data=poll_intr_queue(q)) process(data);
*/
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
static u8 *
xhci_poll_intr_queue(void *const q)
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
{
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
if (!q)
return NULL;
intrq_t *const intrq = (intrq_t *)q;
endpoint_t *const ep = intrq->ep;
xhci_t *const xhci = XHCI_INST(ep->dev->controller);
/* TODO: Reset interrupt queue if it gets halted? */
xhci_handle_events(xhci);
u8 *reqdata = NULL;
while (!reqdata && intrq->ready) {
const int ep_id = xhci_ep_id(ep);
libpayload: xhci: Make XHCI stack usable on ARM This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-04 02:15:31 +02:00
transfer_ring_t *const tr =
xhci->dev[ep->dev->address].transfer_rings[ep_id];
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Fetch the request's buffer */
reqdata = phys_to_virt(intrq->next->ptr_low);
/* Enqueue the last (spare) TRB and ring doorbell */
xhci_enqueue_trb(tr);
libpayload: usb: xhci: Support rockchip xHCI controller 1. Make the xHCI driver to support xHCI controller v1.1 2. And a new function xhci_ring_doorbell(), it aims to add a memory barrier before ringing the doorbell, to ensure all TRB changes are written to memory. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB on Kevin rk3399 platform Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c21e92 Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/346831 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15111 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-05-24 13:40:46 +02:00
xhci_ring_doorbell(ep);
libpayload: Fill gaps in the xHCI driver Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 14:37:15 +02:00
/* Reuse the current buffer for the next spare TRB */
xhci_clear_trb(tr->cur, tr->pcs);
tr->cur->ptr_low = virt_to_phys(reqdata);
tr->cur->ptr_high = 0;
TRB_SET(TL, tr->cur, intrq->size);
TRB_SET(TT, tr->cur, TRB_NORMAL);
TRB_SET(ISP, tr->cur, 1);
TRB_SET(IOC, tr->cur, 1);
/* Check if anything was transferred */
const size_t read = TRB_GET(TL, intrq->next);
if (!read)
reqdata = NULL;
else if (read < intrq->size)
/* At least zero it, poll interface is rather limited */
memset(reqdata + read, 0x00, intrq->size - read);
/* Advance the interrupt queue */
if (intrq->ready == intrq->next)
/* This was last TRB being ready */
intrq->ready = NULL;
intrq->next = xhci_next_trb(intrq->next, NULL);
}
return reqdata;
Add support for OHCI controllers and prelimiary support for xHCI (USB3) controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13 11:18:58 +02:00
}