GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/src/lib/Makefile.inc

108 lines
3.1 KiB
PHP
Raw Normal View History

src/lib/Makefile.inc: Add license header Change-Id: If8bce4ebde9101ac9087fcbd43adc0e08c26352d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/1957 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30 21:19:59 +01:00
#
# This file is part of the coreboot project.
#
# Copyright (C) 2009 coresystems GmbH
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
armv7: Add 'bootblock' build class. For ARM platform, the bootblock may need more C source files to initialize UART / SPI for loading romstage. To preventing making complex and implicit dependency by using #include inside bootblock.c, we should add a new build class "bootblock". Also #ifdef __BOOT_BLOCK__ can be used to detect if the source is being compiled for boot block. For x86, the bootblock is limited to fewer assembly files so it's not using this class. (Some files shared by x86 and arm in top level or lib are also changed but nothing should be changed in x86 build process.) Change-Id: Ia81bccc366d2082397d133d9245f7ecb33b8bc8b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2252 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-31 18:09:24 +01:00
bootblock-y += cbfs.c
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
bootblock-y += memset.c
endif
bootblock-y += memchr.c
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
bootblock-y += memcpy.c
endif
bootblock-y += memcmp.c
Add native memset() function on x86 Change-Id: Ia118ebe0a4b59bdcefd78895141a365170f6aed2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/737 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-27 00:11:52 +02:00
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
romstage-y += memset.c
Add native memset() function on x86 Change-Id: Ia118ebe0a4b59bdcefd78895141a365170f6aed2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/737 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-27 00:11:52 +02:00
endif
Add an implementation for the memchr library function Change-Id: Icded479d246f7cce8a3d2154c69f75178fa513e1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/708 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2011-09-16 11:18:56 +02:00
romstage-y += memchr.c
Add faster, architecture dependent memcpy() Change-Id: I38d15f3f1ec65f0cb7974d2dd4ae6356433bddd8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-26 01:43:34 +02:00
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
romstage-y += memcpy.c
Add faster, architecture dependent memcpy() Change-Id: I38d15f3f1ec65f0cb7974d2dd4ae6356433bddd8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-26 01:43:34 +02:00
endif
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
romstage-y += memcmp.c
romstage-y += cbfs.c
romstage-y += lzma.c
#romstage-y += lzmadecode.c
romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c
romstage-$(CONFIG_HAVE_ACPI_RESUME) += cbmem.c
romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as an example. This newer version reflects the recent changes to further simplify the console code and partly gets rid of some hacks in the previous version. Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27 01:47:04 +02:00
romstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
CBMEM CONSOLE: Enable coreboot CBMEM console. The appropriate Makefiles are modified to include the required source code in compilation. Change-Id: I91842b1ba0f89d611d3249b63c020a2713a9124f Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/722 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 21:02:18 +02:00
romstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
romstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c
romstage-$(CONFIG_USBDEBUG) += usbdebug.c
Add timestamp collecting to coreboot. This patch adds code to initialize the time stamp collection facility in coreboot. It adds a table in the CBMEM section, which provides the base timer reading value (all other readings are offsets of this one) and an array of timestamp id/timestamp value pairs. Just two values are being added now, this will have to be used more extensively and also integrated into payloads to provide more comprehensive boot process time measurements. Also, since the CBMEM area could already contain a section (from the previous run, before reset), when processing a section addition request we should check if a section already exists and return its address, if so. Change-Id: I7ed9f5c400bc5432f228348b41fd19a67c36d533 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/713 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-09-22 01:12:39 +02:00
romstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
Use fast memset in SMM mode, too ... and always include IP checksumming in romstage. It's generally useful and our upcoming port needs it. Change-Id: I248402d96a23e58354744e053b9d5cca6b74ad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/827 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31 01:28:20 +02:00
romstage-y += compute_ip_checksum.c
romstage-y += memmove.c
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
Drop boot directory It only has two files, move them to src/lib Change-Id: I17943db4c455aa3a934db1cf56e56e89c009679f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1959 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-30 21:23:45 +01:00
ramstage-y += hardwaremain.c
ramstage-y += selfboot.c
Add native memset() function on x86 Change-Id: Ia118ebe0a4b59bdcefd78895141a365170f6aed2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/737 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-27 00:11:52 +02:00
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
ramstage-y += memset.c
Add native memset() function on x86 Change-Id: Ia118ebe0a4b59bdcefd78895141a365170f6aed2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/737 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-27 00:11:52 +02:00
endif
Add an implementation for the memchr library function Change-Id: Icded479d246f7cce8a3d2154c69f75178fa513e1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/708 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2011-09-16 11:18:56 +02:00
ramstage-y += memchr.c
Add faster, architecture dependent memcpy() Change-Id: I38d15f3f1ec65f0cb7974d2dd4ae6356433bddd8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-26 01:43:34 +02:00
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
ramstage-y += memcpy.c
Add faster, architecture dependent memcpy() Change-Id: I38d15f3f1ec65f0cb7974d2dd4ae6356433bddd8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-26 01:43:34 +02:00
endif
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
ramstage-y += memcmp.c
ramstage-y += memmove.c
ramstage-y += malloc.c
SMM: Add support for malloc in SMM if using TSEG This is used by the SPI driver and ELOG. It requires SMM TSEG and a _heap/_eheap region defined in the linker script. The first time malloc is called in SMM the start and end pointers to the heap region will be relocated for the TSEG region. Enable SPI flash and ELOG in SMM and successfully allocate memory. The allocated addresses are verified to be sure they are within the TSEG heap region: smm.elf:00014000 B _eheap smm.elf:00010000 B _heap TSEG base is 0xad000000 Memory allocated in ELOG: ELOG: MEM @0xad018030 Change-Id: I5cca38e4888d597cbbfcd9983cd6a7ae3600c2a3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1312 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-06-23 22:33:32 +02:00
smm-$(CONFIG_SMM_TSEG) += malloc.c
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
ramstage-y += delay.c
ramstage-y += fallback_boot.c
ramstage-y += compute_ip_checksum.c
ramstage-y += version.c
ramstage-y += cbfs.c
ramstage-y += lzma.c
#ramstage-y += lzmadecode.c
Implement stack overflow checking for the BSP Previous patches implemented stack overflow checking for the APs. This patch builds on the BSP stack poisoning patch to implement stack overflow checking for the BSP, and also prints out maximum stack usage. It reveals that our 32K stack is ridiculously oversized, especially now that the lzma decoder doesn't use a giant 16K on-stack array. Break the stack checking out into a separate function, which we will later use for the APs. CPU0: stack from 00180000 to 00188000:Lowest stack address 00187ad8 To test failure, change the DEADBEEF stack poison value in c_start.S to something else. Then we should get an error like this: Stack overrun on BSP.Increase stack from current 32768 bytes CPU0: stack from 00180000 to 00188000:Lowest stack address 00180000 Separate the act of loading from the act of starting the payload. This allows us better error management and reporting of stack use. Now we see: CPU0: stack from 00180000 to 00188000:Lowest stack address 00187ad8 Tested for both success and failure on Link. At the same time, feel free to carefully check my manipulation of _estack. Change-Id: Ibb09738b15ec6a5510ac81e45dd82756bfa5aac2 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1286 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-06-13 01:29:32 +02:00
ramstage-y += stack.c
Only include libgcc wrappers on x86 ARM does not need them, and they're causing trouble Change-Id: I6c70a52c68fdcdbf211217d30c96e1c2877c7f90 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2009 Tested-by: build bot (Jenkins)
2012-12-08 02:28:02 +01:00
ramstage-$(CONFIG_ARCH_X86) += gcc.c
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
ramstage-y += clog2.c
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
ramstage-y += cbmem.c
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as an example. This newer version reflects the recent changes to further simplify the console code and partly gets rid of some hacks in the previous version. Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27 01:47:04 +02:00
ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
CBMEM CONSOLE: Enable coreboot CBMEM console. The appropriate Makefiles are modified to include the required source code in compilation. Change-Id: I91842b1ba0f89d611d3249b63c020a2713a9124f Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/722 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-30 21:02:18 +02:00
ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
ramstage-$(CONFIG_USBDEBUG) += usbdebug.c
ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c
Add support for the tracing infastructure in coreboot. The compiler is forced to emmit special functions on every entry/exit of the function. Add a compile time option to support it. Function entries will be printed in the console. The CONFIG_TRACE has more documentation. Patch for userspace tools will follow. Change-Id: I2cbeb3f104892b034c8756f86ed05bf71187c3f3 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/178 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-02 23:23:41 +02:00
ramstage-$(CONFIG_TRACE) += trace.c
Add timestamp collecting to coreboot. This patch adds code to initialize the time stamp collection facility in coreboot. It adds a table in the CBMEM section, which provides the base timer reading value (all other readings are offsets of this one) and an array of timestamp id/timestamp value pairs. Just two values are being added now, this will have to be used more extensively and also integrated into payloads to provide more comprehensive boot process time measurements. Also, since the CBMEM area could already contain a section (from the previous run, before reset), when processing a section addition request we should check if a section already exists and return its address, if so. Change-Id: I7ed9f5c400bc5432f228348b41fd19a67c36d533 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/713 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-09-22 01:12:39 +02:00
ramstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c
Implement GCC code coverage analysis In order to provide some insight on what code is executed during coreboot's run time and how well our test scenarios work, this adds code coverage support to coreboot's ram stage. This should be easily adaptable for payloads, and maybe even romstage. See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for more information. To instrument coreboot, select CONFIG_COVERAGE ("Code coverage support") in Kconfig, and recompile coreboot. coreboot will then store its code coverage information into CBMEM, if possible. Then, run "cbmem -CV" as root on the target system running the instrumented coreboot binary. This will create a whole bunch of .gcda files that contain coverage information. Tar them up, copy them to your build system machine, and untar them. Then you can use your favorite coverage utility (gcov, lcov, ...) to visualize code coverage. For a sneak peak of what will expect you, please take a look at http://www.coreboot.org/~stepan/coreboot-coverage/ Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2052 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-19 01:23:28 +01:00
ramstage-$(CONFIG_COVERAGE) += libgcov.c
YABEL update - drop x86emu + old biosemu in favor of YABEL - Add YABEL_DIRECTHW to get the old biosemu behavior - add support for vesa console using YABEL - add coreboot table entry with console information - add bootsplash support (reads /bootsplash.jpg from CBFS) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Pattrick Hueper <phueper@hueper.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5135 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-22 05:33:13 +01:00
Get rid of drivers class The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16 14:50:32 +01:00
ramstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
Use fast memset in SMM mode, too ... and always include IP checksumming in romstage. It's generally useful and our upcoming port needs it. Change-Id: I248402d96a23e58354744e053b9d5cca6b74ad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/827 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31 01:28:20 +02:00
ifneq ($(CONFIG_HAVE_ARCH_MEMSET),y)
smm-y += memset.c
endif
Add faster, architecture dependent memcpy() Change-Id: I38d15f3f1ec65f0cb7974d2dd4ae6356433bddd8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2011-10-26 01:43:34 +02:00
ifneq ($(CONFIG_HAVE_ARCH_MEMCPY),y)
smm-y += memcpy.c
endif
Use fast memset in SMM mode, too ... and always include IP checksumming in romstage. It's generally useful and our upcoming port needs it. Change-Id: I248402d96a23e58354744e053b9d5cca6b74ad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/827 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31 01:28:20 +02:00
smm-y += cbfs.c memcmp.c
drop half an uart8250 implementation from smiutil and use the common code for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15 00:28:00 +02:00
smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as an example. This newer version reflects the recent changes to further simplify the console code and partly gets rid of some hacks in the previous version. Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27 01:47:04 +02:00
smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
Fix usb debug dongle support - move enable_usbdebug() declaration to usbdebug.h - reinitialize debug driver in ramstage, as copying the data structure from romstage doesn't work right now. This way of copying data from romstage to ramstage is really board/cpu specific, and is likely to break often. So don't do it. Change-Id: I394678ded6679c1803e29eb691b926182bdcab68 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30 09:57:35 +01:00
smm-$(CONFIG_USBDEBUG) += usbdebug.c
This patch fixes build.h dependencies in coreboot again. -include was dropped, the files in question do an #include <build.h> already. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5310 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29 15:04:13 +02:00
Rename build system variables to be more intuitive, and at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30 18:55:02 +02:00
$(obj)/lib/version.ramstage.o : $(obj)/build.h
Fix compilation with CONFIG_USE_OPTION_TABLE enabled Change-Id: I6c5d973442bc1770702180a8964f1bf6ed6062ed Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/696 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-07-30 00:34:14 +02:00
OPTION_TABLE_H:=
ifeq ($(CONFIG_HAVE_OPTION_TABLE),y)
OPTION_TABLE_H:=$(obj)/option_table.h
endif
$(obj)/lib/uart8250mem.smm.o : $(OPTION_TABLE_H)
Fix dependency problem for uart8250.c as well If you build in parallel, option_table.h will occasionally not be there yet and the build will fail. Change-Id: I828956ab2e05c48d20c2f7c55616cc8fa19e1227 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/698 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-11 23:51:31 +02:00
$(obj)/lib/uart8250.smm.o : $(OPTION_TABLE_H)
Fix compilation with CONFIG_USE_OPTION_TABLE enabled Change-Id: I6c5d973442bc1770702180a8964f1bf6ed6062ed Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/696 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-07-30 00:34:14 +02:00