coreboot-kgpe-d16/util/newconfig/config.g

2355 lines
67 KiB
Plaintext
Raw Normal View History

# -*- python -*-
import sys
import os
import re
import string
import types
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
import traceback
warnings = 0
errors = 0
target_dir = ''
target_name = ''
treetop = ''
full_mainboard_path = ''
mainboard_path = ''
global_options = {}
global_options_by_order = []
global_option_values = {}
global_uses_options = {}
global_exported_options = []
romimages = {}
buildroms = []
curimage = 0
alloptions = 0 # override uses at top level
local_path = re.compile(r'^\.')
include_pattern = re.compile(r'%%([^%]+)%%')
# the cpu type for this mainboard
cpu_type = 0
# -----------------------------------------------------------------------------
# Utility Classes
# -----------------------------------------------------------------------------
class stack:
"""Used to keep track of the current part or dir"""
class __stack_iter:
def __init__ (self, stack):
self.index = 0
self.len = len(stack)
self.stack = stack
def __iter__ (self):
return self
def next (self):
if (self.index < self.len):
s = self.stack[self.index]
self.index = self.index + 1
return s
raise StopIteration
def __init__ (self):
self.stack = []
def __len__ (self):
return len(self.stack)
def __getitem__ (self, i):
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
return self.stack[i]
def __iter__ (self):
return self.__stack_iter(self.stack)
def push(self, part):
self.stack.append(part)
def pop(self):
try:
return self.stack.pop()
except IndexError:
return 0
def tos(self):
try:
return self.stack[-1]
except IndexError:
return 0
def empty(self):
return (len(self.stack) == 0)
partstack = stack()
dirstack = stack()
class debug_info:
none = 0
gencode = 1
dumptree = 2
object = 3
dict = 4
statement = 5
dump = 6
def __init__(self, *level):
self.__level = level
def setdebug(self, *level):
self.__level = level
def level(self, level):
return level in self.__level
def info(self, level, str):
if level in self.__level:
print str
global debug
debug = debug_info(debug_info.none)
# -----------------------------------------------------------------------------
# Error Handling
# -----------------------------------------------------------------------------
class location:
"""Used to keep track of our current location while parsing
configuration files"""
class __place:
def __init__(self, file, line, command):
self.file = file
self.line = line
self.command = command
def next_line(self, command):
self.line = self.line + 1
self.command = command
def at(self):
return "%s:%d" % (self.file, self.line)
def __init__ (self):
self.stack = stack()
def __str__ (self):
s = ''
for p in self.stack:
if (s == ''):
s = p.at()
else:
s = s + '\n' + p.at()
return s
def file(self):
return self.stack.tos().file
def line(self):
return self.stack.tos().line
def command(self):
return self.stack.tos().command
def push(self, file):
self.stack.push(self.__place(os.path.normpath(file), 0, ""))
def pop(self):
self.stack.pop()
def next_line(self, command):
self.stack.tos().next_line(command)
def at(self):
return self.stack.tos().at()
loc = location()
def error(string):
"""Print error message"""
global errors, loc
errors = errors + 1
print "===> ERROR: %s" % string
print "%s" % loc
def fatal(string):
"""Print error message and exit"""
error(string)
exitiferrors()
def warning(string):
"""Print warning message"""
global warnings, loc
warnings = warnings + 1
print "===> WARNING: %s" % string
def notice(string):
"""Print notice message"""
#print "===> NOTE: %s" % string
def exitiferrors():
"""Exit parser if an error has been encountered"""
if (errors != 0):
sys.exit(1)
def safe_open(file, mode):
try:
return open(file, mode)
except IOError:
fatal("Could not open file \"%s\"" % file)
# -----------------------------------------------------------------------------
# Main classes
# -----------------------------------------------------------------------------
class romimage:
"""A rom image is the ultimate goal of linuxbios"""
def __init__ (self, name):
# name of this rom image
self.name = name
# set by 'arch' directive
self.arch = ''
# set by 'payload' directive
self.payload = ''
# set by 'init' directive
self.initfile = ''
# make rules added by 'makerule' directive
self.makebaserules = {}
# object files added by 'object' directive
self.objectrules = {}
# init object files added by 'initobject' directive
self.initobjectrules = {}
# driver files added by 'drive' directive
self.driverrules = {}
# loader scripts added by 'ldscript' directive
self.ldscripts = []
# user defines added by 'makedefine' directive
self.userdefines = []
# files to be included in crt0.S
self.initincludes = {}
# as above, but order is preserved
self.initincludesorder = []
# transitional flag to support old crtinclude format
self.useinitincludes = 0
# instance counter for parts
self.partinstance = 0
# chip config files included by the 'config' directive
self.configincludes = {}
# root of part tree
self.root = 0
# name of target directory specified by 'target' directive
self.target_dir = ''
# option values used in rom image
self.values = {}
# exported options
self.exported_options = []
# Last device built
self.last_device = 0
def getname(self):
return self.name
def getvalues(self):
return self.values
def setarch(self, arch):
self.arch = arch
def setpayload(self, payload):
self.payload = payload
def setinitfile(self, initfile):
self.initfile = initfile
def getinitfile(self):
return self.initfile
def addmakerule(self, id):
o = getdict(self.makebaserules, id)
if (o):
warning("rule %s previously defined" % id)
o = makerule(id)
setdict(self.makebaserules, id, o)
def getmakerules(self):
return self.makebaserules
def getmakerule(self, id):
o = getdict(self.makebaserules, id)
if (o):
return o
fatal("No such make rule \"%s\"" % id)
def addmakeaction(self, id, str):
o = getdict(self.makebaserules, id)
if (o):
a = dequote(str)
o.addaction(a)
return
fatal("No such rule \"%s\" for addmakeaction" % id)
def addmakedepend(self, id, str):
o = getdict(self.makebaserules, id)
if (o):
a = dequote(str)
o.adddependency(a)
return
fatal("No such rule \"%s\" for addmakedepend" % id)
# this is called with an an object name.
# the easiest thing to do is add this object to the current
# component.
# such kludgery. If the name starts with '.' then make the
# dependency be on ./thing.x gag me.
def addobjectdriver(self, dict, object_name):
global dirstack
suffix = object_name[-2:]
if (suffix == '.o'):
suffix = '.c'
base = object_name[:-2]
type = object_name[-1:]
if (object_name[0] == '.'):
source = base + suffix
else:
source = os.path.join(dirstack.tos(), base + suffix)
object = base + '.o'
debug.info(debug.object, "add object %s source %s" % (object_name, source))
l = getdict(dict, base)
if (l):
warning("object/driver %s previously defined" % base)
setdict(dict, base, [object, source, type, base])
def addinitobjectrule(self, name):
self.addobjectdriver(self.initobjectrules, name)
def addobjectrule(self, name):
self.addobjectdriver(self.objectrules, name)
def adddriverrule(self, name):
self.addobjectdriver(self.driverrules, name)
def getinitobjectrules(self):
return self.initobjectrules
def getinitobjectrule(self, name):
o = getdict(self.initobjectrules, name)
if (o):
return o
fatal("No such init object rule \"%s\"" % name)
def getobjectrules(self):
return self.objectrules
def getobjectrule(self, name):
o = getdict(self.objectrules, name)
if (o):
return o
fatal("No such object rule \"%s\"" % name)
def getdriverrules(self):
return self.driverrules
def getdriverrule(self, name):
o = getdict(self.driverrules, name)
if (o):
return o
fatal("No such driver rule \"%s\"" % name)
def addldscript(self, path):
self.ldscripts.append(path)
def getldscripts(self):
return self.ldscripts
def adduserdefine(self, str):
self.userdefines.append(str)
def getuserdefines(self):
return self.userdefines
def addinitinclude(self, str, path):
if (str != 0):
self.useinitincludes = 1
debug.info(debug.object, "ADDCRT0: %s -> %s" % (str, path))
o = getdict(self.initincludes, path)
if (o):
warning("init include for %s previously defined" % path)
o = initinclude(str, path)
setdict(self.initincludes, path, o)
self.initincludesorder.append(path)
def getinitincludes(self):
return self.initincludesorder
def getinitinclude(self, path):
o = getdict(self.initincludes, path)
if (o):
return o
fatal("No such init include \"%s\"" % path)
def addconfiginclude(self, part, path):
setdict(self.configincludes, part, path)
def getconfigincludes(self):
return self.configincludes
def getincludefilename(self):
if (self.useinitincludes):
return "crt0.S"
else:
return "crt0_includes.h"
def newformat(self):
return self.useinitincludes
def numparts(self):
return self.partinstance
def newpartinstance(self):
i = self.partinstance
self.partinstance = self.partinstance + 1
return i
def setroot(self, part):
self.root = part
def getroot(self):
return self.root
def settargetdir(self, path):
self.targetdir = path
def gettargetdir(self):
return self.targetdir
class buildrom:
"""A buildrom statement"""
def __init__ (self, filename, size, roms):
self.name = filename
self.size = size
self.roms = roms
def __len__ (self):
return len(self.roms)
def __getitem__(self,i):
return self.roms[i]
class initinclude:
"""include file for initialization code"""
def __init__ (self, str, path):
self.string = str
self.path = path
def getstring(self):
return self.string
def getpath(self):
return self.path
class makerule:
"""Rule to be included in Makefile"""
def __init__ (self, target):
self.target = target
self.dependency = []
self.actions = []
def addaction(self, action):
self.actions.append(action)
def adddependency(self, dependency):
self.dependency.append(dependency)
def gtarget(self):
return self.target
def gdependency(self):
return self.dependency
def gaction(self):
return self.actions
class option:
"""Configuration option"""
def __init__ (self, name):
self.name = name # name of option
self.loc = 0 # current location
self.used = 0 # option has been used
# it is undefined)
self.comment = '' # description of option
self.exportable = 0 # option is able to be exported
self.format = '%s' # option print format
self.write = [] # parts that can set this option
def where(self):
return self.loc
def setcomment(self, comment, loc):
if (self.comment != ''):
print "%s: " % self.name
print "Attempt to modify comment at %s" % loc
return
self.comment = comment
def setexportable(self):
self.exportable = 1
def setnoexport(self):
self.exportable = 0
def setformat(self, fmt):
self.format = fmt
def getformat(self):
return self.format
def setused(self):
if (self.exportable):
self.exported = 1
self.used = 1
def setwrite(self, part):
self.write.append(part)
def isexportable(self):
return self.exportable
def iswritable(self, part):
return (part in self.write)
class option_value:
"""Value of a configuration option. The option has a default
value which can be changed at any time. Once an option has been
set the default value is no longer used."""
def __init__(self, name, prev):
self.name = name
self.value = ''
self.set = 0
if (prev):
self.value = prev.value
self.set = prev.set
def setvalue(self, value):
if ((self.set & 2) == 2):
warning("Changing option %s" % self.name)
else:
self.set |= 2
self.value = value
def setdefault(self, value):
if ((self.set & 1) == 1):
notice("Changing default value of %s" % self.name)
if ((self.set & 2) == 0):
self.value = value
self.set |= 1
def contents(self):
return self.value
def isset(self):
return (self.set & 2) == 2
class partobj:
"""A configuration part"""
def __init__ (self, image, dir, parent, part, type_name, instance_name, chip_or_device):
debug.info(debug.object, "partobj dir %s parent %s part %s" \
% (dir, parent, part))
# romimage that is configuring this part
self.image = image
# links for static device tree
self.children = 0
self.prev_sibling = 0
self.next_sibling = 0
self.prev_device = 0
self.next_device = 0
self.chip_or_device = chip_or_device
# list of init code files
self.initcode = []
# initializers for static device tree
self.registercode = {}
# part name
self.part = part
# type name of this part
self.type_name = type_name
# object files needed to build this part
self.objects = []
# directory containg part files
self.dir = dir
# instance number, used to distinguish anonymous
# instances of this part
self.instance = image.newpartinstance()
debug.info(debug.object, "INSTANCE %d" % self.instance)
# Options used by this part
self.uses_options = {}
# Name of chip config file (0 if not needed)
self.chipconfig = 0
# Flag to indicate that we have generated type
# definitions for this part (only want to do it once)
self.done_types = 0
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
# Path to the device
self.path = ""
# Resources of the device
self.resoruce = ""
self.resources = 0
# Enabled state of the device
self.enabled = 1
# Flag if I am a dumplicate device
self.dup = 0
# If no instance name is supplied then generate
# a unique name
if (instance_name == 0):
self.instance_name = self.type_name + \
"_dev%d" % self.instance
self.chipinfo_name = "%s_info_%d" \
% (self.type_name, self.instance)
else:
self.instance_name = instance_name
self.chipinfo_name = "%s_info_%d" % (self.instance_name, self.instance)
# Link this part into the device list
if (self.chip_or_device == 'device'):
if (image.last_device):
image.last_device.next_device = self
self.prev_device = image.last_device
image.last_device = self
# Link this part into the tree
if (parent and (part != 'arch')):
debug.info(debug.gencode, "add to parent")
self.parent = parent
# add current child as my sibling,
# me as the child.
if (parent.children):
debug.info(debug.gencode, "add %s (%d) as sibling" % (parent.children.dir, parent.children.instance))
youngest = parent.children
while(youngest.next_sibling):
youngest = youngest.next_sibling
youngest.next_sibling = self
self.prev_sibling = youngest
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
else:
parent.children = self
else:
self.parent = self
def info(self):
return "%s: %s" % (self.part, self.type)
def type(self):
return self.chip_or_device
def readable_name(self):
name = ""
name = "%s_%d" % (self.type_name, self.instance)
if (self.chip_or_device == 'chip'):
name = "%s %s %s" % (name, self.part, self.dir)
else:
name = "%s %s" % (name, self.path)
return name
def dumpme(self, lvl):
"""Dump information about this part for debugging"""
print "%d: %s" % (lvl, self.readable_name())
print "%d: part %s" % (lvl, self.part)
print "%d: instance %d" % (lvl, self.instance)
print "%d: chip_or_device %s" % (lvl, self.chip_or_device)
print "%d: dir %s" % (lvl,self.dir)
print "%d: type_name %s" % (lvl,self.type_name)
print "%d: parent: %s" % (lvl, self.parent.readable_name())
if (self.children):
print "%d: child %s" % (lvl, self.children.readable_name())
if (self.next_sibling):
print "%d: siblings %s" % (lvl, self.next_sibling.readable_name())
print "%d: initcode " % lvl
for i in self.initcode:
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
print "\t%s" % i
print "%d: registercode " % lvl
for f, v in self.registercode.items():
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
print "\t%s = %s" % (f, v)
print "\n"
def firstchilddevice(self):
"""Find the first device in the children link."""
kid = self.children
while (kid):
if (kid.chip_or_device == 'device'):
return kid
else:
kid = kid.children
return 0
def firstparentdevice(self):
"""Find the first device in the parent link."""
parent = self.parent
while (parent and (parent.parent != parent) and (parent.chip_or_device != 'device')):
parent = parent.parent
if ((parent.parent != parent) and (parent.chip_or_device != 'device')):
parent = 0
while(parent and (parent.dup == 1)):
parent = parent.prev_sibling
if (not parent):
fatal("Device %s has no device parent; this is a config file error" % self.readable_name())
return parent
def firstparentdevicelink(self):
"""Find the first device in the parent link and record which link it is."""
link = 0
parent = self.parent
while (parent and (parent.parent != parent) and (parent.chip_or_device != 'device')):
parent = parent.parent
if ((parent.parent != parent) and (parent.chip_or_device != 'device')):
parent = 0
while(parent and (parent.dup == 1)):
parent = parent.prev_sibling
link = link + 1
if (not parent):
fatal("Device %s has no device parent; this is a config file error" % self.readable_name())
return link
def firstparentchip(self):
"""Find the first chip in the parent link."""
parent = self.parent
while (parent):
if ((parent.parent == parent) or (parent.chip_or_device == 'chip')):
return parent
else:
parent = parent.parent
fatal("Device %s has no chip parent; this is a config file error" % self.readable_name())
def firstsiblingdevice(self):
"""Find the first device in the sibling link."""
sibling = self.next_sibling
while(sibling and (sibling.path == self.path)):
sibling = sibling.next_sibling
if ((not sibling) and (self.parent.chip_or_device == 'chip')):
sibling = self.parent.next_sibling
while(sibling):
if (sibling.chip_or_device == 'device'):
return sibling
else:
sibling = sibling.children
return 0
def gencode(self, file, pass_num):
"""Generate static initalizer code for this part. Two passes
are used - the first generates type information, and the second
generates instance information"""
if (pass_num == 0):
if (self.chip_or_device == 'chip'):
return;
else:
if (self.instance):
file.write("struct device %s;\n" \
% self.instance_name)
else:
file.write("struct device dev_root;\n")
return
# This is pass the second, which is pass number 1
# this is really just a case statement ...
if (self.chip_or_device == 'chip'):
if (self.chipconfig):
debug.info(debug.gencode, "gencode: chipconfig(%d)" % \
self.instance)
file.write("struct %s_config %s" % (self.type_name ,\
self.chipinfo_name))
if (self.registercode):
file.write("\t= {\n")
for f, v in self.registercode.items():
file.write( "\t.%s = %s,\n" % (f, v))
file.write("};\n")
else:
file.write(";")
file.write("\n")
if (self.instance == 0):
self.instance_name = "dev_root"
file.write("struct device **last_dev_p = &%s.next;\n" % (self.image.last_device.instance_name))
file.write("struct device dev_root = {\n")
file.write("\t.ops = &default_dev_ops_root,\n")
file.write("\t.bus = &dev_root.link[0],\n")
file.write("\t.path = { .type = DEVICE_PATH_ROOT },\n")
file.write("\t.enabled = 1,\n\t.links = 1,\n")
file.write("\t.on_mainboard = 1,\n")
file.write("\t.link = {\n\t\t[0] = {\n")
file.write("\t\t\t.dev=&dev_root,\n\t\t\t.link = 0,\n")
file.write("\t\t\t.children = &%s,\n" % self.firstchilddevice().instance_name)
file.write("\t\t},\n")
file.write("\t},\n")
if (self.chipconfig):
file.write("\t.chip_ops = &%s_ops,\n" % self.type_name)
file.write("\t.chip_info = &%s_info_%s,\n" % (self.type_name, self.instance))
file.write("\t.next = &%s,\n" % self.firstchilddevice().instance_name)
file.write("};\n")
return
# Don't print duplicate devices, just print their children
if (self.dup):
return
file.write("struct device %s = {\n" % self.instance_name)
file.write("\t.ops = 0,\n")
file.write("\t.bus = &%s.link[%d],\n" % \
(self.firstparentdevice().instance_name, \
self.firstparentdevicelink()))
file.write("\t.path = {%s},\n" % self.path)
file.write("\t.enabled = %d,\n" % self.enabled)
file.write("\t.on_mainboard = 1,\n")
if (self.resources):
file.write("\t.resources = %d,\n" % self.resources)
file.write("\t.resource = {%s\n\t },\n" % self.resource)
file.write("\t.link = {\n");
links = 0
bus = self
while(bus and (bus.path == self.path)):
child = bus.firstchilddevice()
if (child or (bus != self) or (bus.next_sibling and (bus.next_sibling.path == self.path))):
file.write("\t\t[%d] = {\n" % links)
file.write("\t\t\t.link = %d,\n" % links)
file.write("\t\t\t.dev = &%s,\n" % self.instance_name)
if (child):
file.write("\t\t\t.children = &%s,\n" %child.instance_name)
file.write("\t\t},\n")
links = links + 1
if (1):
bus = bus.next_sibling
else:
bus = 0
file.write("\t},\n")
file.write("\t.links = %d,\n" % (links))
sibling = self.firstsiblingdevice();
if (sibling):
file.write("\t.sibling = &%s,\n" % sibling.instance_name)
chip = self.firstparentchip()
if (chip and chip.chipconfig):
file.write("\t.chip_ops = &%s_ops,\n" % chip.type_name)
file.write("\t.chip_info = &%s_info_%s,\n" % (chip.type_name, chip.instance))
if (self.next_device):
file.write("\t.next=&%s\n" % self.next_device.instance_name)
file.write("};\n")
return
def addinit(self, code):
"""Add init file to this part"""
self.initcode.append(code)
def addconfig(self, path):
"""Add chip config file to this part"""
self.chipconfig = os.path.join(self.dir, path)
self.image.addconfiginclude(self.type_name, self.chipconfig)
def addregister(self, field, value):
"""Register static initialization information"""
if (self.chip_or_device != 'chip'):
fatal("Only chips can have register values")
field = dequote(field)
value = dequote(value)
setdict(self.registercode, field, value)
def set_enabled(self, enabled):
self.enabled = enabled
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
def start_resources(self):
self.resource = ""
self.resources = 0
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
def end_resources(self):
self.resource = "%s" % (self.resource)
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
def add_resource(self, type, index, value):
""" Add a resource to a device """
self.resource = "%s\n\t\t{ .flags=%s, .index=0x%x, .base=0x%x}," % (self.resource, type, index, value)
self.resources = self.resources + 1
def set_path(self, path):
self.path = path
if (self.prev_sibling and (self.prev_sibling.path == self.path)):
self.dup = 1
if (self.prev_device):
self.prev_device.next_device = self.next_device
if (self.next_device):
self.next_device.prev_device = self.prev_device
if (self.image.last_device == self):
self.image.last_device = self.prev_device
self.prev_device = 0
self.next_device = 0
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
def addpcipath(self, slot, function):
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
""" Add a relative pci style path from our parent to this device """
if ((slot < 0) or (slot > 0x1f)):
fatal("Invalid device id")
if ((function < 0) or (function > 7)):
fatal("Invalid pci function %s" % function )
self.set_path(".type=DEVICE_PATH_PCI,.u={.pci={ .devfn = PCI_DEVFN(0x%x,%d)}}" % (slot, function))
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
def addpnppath(self, port, device):
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
""" Add a relative path to a pnp device hanging off our parent """
if ((port < 0) or (port > 65536)):
fatal("Invalid port")
if ((device < 0) or (device > 0xff)):
fatal("Invalid device")
self.set_path(".type=DEVICE_PATH_PNP,.u={.pnp={ .port = 0x%x, .device = 0x%x }}" % (port, device))
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
def addi2cpath(self, device):
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
""" Add a relative path to a i2c device hanging off our parent """
if ((device < 0) or (device > 0x7f)):
fatal("Invalid device")
self.set_path(".type=DEVICE_PATH_I2C,.u={.i2c={ .device = 0x%x }}" % (device))
def addapicpath(self, apic_id):
""" Add a relative path to a cpu device hanging off our parent """
if ((apic_id < 0) or (apic_id > 255)):
fatal("Invalid device")
self.set_path(".type=DEVICE_PATH_APIC,.u={.apic={ .apic_id = 0x%x }}" % (apic_id))
def addpci_domainpath(self, pci_domain):
""" Add a pci_domain number to a chip """
if ((pci_domain < 0) or (pci_domain > 0xffff)):
fatal("Invalid pci_domain: 0x%x is out of the range 0 to 0xffff" % pci_domain)
self.set_path(".type=DEVICE_PATH_PCI_DOMAIN,.u={.pci_domain={ .domain = 0x%x }}" % (pci_domain))
def addapic_clusterpath(self, cluster):
""" Add an apic cluster to a chip """
if ((cluster < 0) or (cluster > 15)):
fatal("Invalid apic cluster: %d is out of the range 0 to ff" % cluster)
self.set_path(".type=DEVICE_PATH_APIC_CLUSTER,.u={.apic_cluster={ .cluster = 0x%x }}" % (cluster))
def addcpupath(self, cpu_id):
""" Add a relative path to a cpu device hanging off our parent """
if ((cpu_id < 0) or (cpu_id > 255)):
fatal("Invalid device")
self.set_path(".type=DEVICE_PATH_CPU,.u={.cpu={ .id = 0x%x }}" % (cpu_id))
def addcpu_buspath(self, id):
""" Add a cpu_bus to a chip """
if ((id < 0) or (id > 255)):
fatal("Invalid device")
self.set_path(".type=DEVICE_PATH_CPU_BUS,.u={.cpu_bus={ .id = 0x%x }}" % (id))
def usesoption(self, name):
"""Declare option that can be used by this part"""
global global_options
o = getdict(global_options, name)
if (o == 0):
fatal("can't use undefined option %s" % name)
o1 = getdict(self.uses_options, name)
if (o1):
return
setdict(self.uses_options, name, o)
exportoption(o, self.image.exported_options)
# -----------------------------------------------------------------------------
# statements
# -----------------------------------------------------------------------------
def getdict(dict, name):
if name not in dict.keys():
debug.info(debug.dict, "Undefined: %s" % name)
return 0
v = dict.get(name, 0)
debug.info(debug.dict, "getdict %s returning %s" % (name, v))
return v
def setdict(dict, name, value):
debug.info(debug.dict, "setdict sets %s to %s" % (name, value))
dict[name] = value
# options.
# to create an option, it has to not exist.
# When an option value is fetched, the fact that it was used is
# remembered.
# Legal things to do:
# set a default value, then set a real value before the option is used.
# set a value, try to set a default, default silently fails.
# Illegal:
# use the value, then try to set the value
def newoption(name):
global global_options, global_options_by_order
o = getdict(global_options, name)
if (o):
fatal("option %s already defined" % name)
o = option(name)
setdict(global_options, name, o)
global_options_by_order.append(name)
def newoptionvalue(name, image):
g = getdict(global_option_values, name)
v = option_value(name, g)
if (image):
setdict(image.getvalues(), name, v)
else:
setdict(global_option_values, name, v)
return v
def getoptionvalue(name, op, image):
global global_option_values
#print "getoptionvalue name %s op %s image %s\n" % (name, op,image)
if (op == 0):
# we want to debug config files, not the config tool, so no:
# print_stack()
fatal("Option %s undefined (missing use command?)" % name)
if (image):
v = getdict(image.getvalues(), name)
else:
v = getdict(global_option_values, name)
return v
def getoption(name, image):
"""option must be declared before being used in a part
if we're not processing a part, then we must
be at the top level where all options are available"""
global global_uses_options, alloptions, curimage
#print "getoption: name %s image %s alloptions %s curimage %s\n\n" % (name, image, alloptions, curimage)
curpart = partstack.tos()
if (alloptions):
o = getdict(global_options, name)
elif (curpart):
o = getdict(curpart.uses_options, name)
if (o == 0):
print "curpart.uses_options is %s\n" % curpart.uses_options
else:
o = getdict(global_uses_options, name)
v = getoptionvalue(name, o, image)
if (v == 0):
v = getoptionvalue(name, o, 0)
if (v == 0):
fatal("No value for option %s" % name)
val = v.contents()
if (not (type(val) is types.StringType)):
return v.contents()
if (val == '' or val[0] != '{'):
return v.contents()
s = curimage
curimage = image
val = parse('delexpr', val)
curimage = s
exitiferrors()
return val
def setoption(name, value, imp):
"""Set an option from within a configuration file. Normally this
is only permitted in the target (top level) configuration file.
If 'imp' is true, then set an option implicitly (e.g. 'arch'
and 'mainboard' statements). Implicit options can be set anywhere
the statements are legal, but also performs an implicit 'uses'
for the option"""
global loc, global_options, global_option_values, curimage
curpart = partstack.tos()
if (not imp and curpart):
fatal("Options may only be set in target configuration file")
if (imp):
usesoption(name)
if (curpart):
o = getdict(curpart.uses_options, name)
else:
o = getdict(global_uses_options, name)
if (not o):
fatal("Attempt to set nonexistent option %s (missing USES?)" % name)
v = getoptionvalue(name, o, curimage)
if (v == 0):
v = newoptionvalue(name, curimage)
v.setvalue(value)
def exportoption(op, exported_options):
if (not op.isexportable()):
return
if (not op in exported_options):
exported_options.append(op)
def setdefault(name, value, isdef):
"""Set the default value of an option from within a configuration
file. This is permitted from any configuration file, but will
result in a warning if the default is set more than once.
If 'isdef' is set, we're defining the option in Options.lb so
there is no need for 'uses'."""
global loc, global_options, curimage
if (isdef):
o = getdict(global_options, name)
if (not o):
return
image = 0
else:
curpart = partstack.tos()
if (curpart):
o = getdict(curpart.uses_options, name)
else:
o = getdict(global_uses_options, name)
if (not o):
fatal("Attempt to set default for nonexistent option %s (missing USES?)" % name)
image = curimage
v = getoptionvalue(name, o, image)
if (v == 0):
v = newoptionvalue(name, image)
v.setdefault(value)
def setnodefault(name):
global loc, global_options
o = getdict(global_options, name)
if (not o):
return
v = getdict(global_option_values, name)
if (v != 0):
warning("removing default for %s" % name)
del global_option_values[name]
def setcomment(name, value):
global loc, global_options
o = getdict(global_options, name)
if (not o):
fatal("setcomment: %s not here" % name)
o.setcomment(value, loc)
def setexported(name):
global global_options
o = getdict(global_options, name)
if (not o):
fatal("setexported: %s not here" % name)
o.setexportable()
global_exported_options.append(o)
def setnoexport(name):
global global_options
o = getdict(global_options, name)
if (not o):
fatal("setnoexport: %s not here" % name)
o.setnoexport()
if (o in global_exported_options):
global_exported_options.remove(o)
def setexportable(name):
global global_options
o = getdict(global_options, name)
if (not o):
fatal("setexportable: %s not here" % name)
o.setexportable()
def setformat(name, fmt):
global global_options
o = getdict(global_options, name)
if (not o):
fatal("setformat: %s not here" % name)
o.setformat(fmt)
def getformated(name, image):
global global_options, global_option_values
o = getdict(global_options, name)
v = getoption(name, image)
f = o.getformat()
return (f % v)
def setwrite(name, part):
global global_options
o = getdict(global_options, name)
if (not o):
fatal("setwrite: %s not here" % name)
o.setwrite(part)
def hasvalue(name, image):
global global_options
o = getdict(global_options, name)
if (o == 0):
return 0
v = 0
if (image):
v = getdict(image.getvalues(), name)
if (v == 0):
v = getdict(global_option_values, name)
return (v != 0)
def isset(name, part):
global global_uses_options, global_option_values, curimage
if (part):
o = getdict(part.uses_options, name)
else:
o = getdict(global_uses_options, name)
if (o == 0):
return 0
v = 0
if (curimage):
v = getdict(curimage.getvalues(), name)
if (v == 0):
v = getdict(global_option_values, name)
return (v != 0 and v.isset())
def usesoption(name):
global global_options, global_uses_options
curpart = partstack.tos()
if (curpart):
curpart.usesoption(name)
return
o = getdict(global_options, name)
if (o == 0):
fatal("Can't use undefined option %s" % name)
o1 = getdict(global_uses_options, name)
if (o1):
return
setdict(global_uses_options, name, o)
exportoption(o, global_exported_options)
def validdef(name, defval):
global global_options
o = getdict(global_options, name)
if (not o):
fatal("validdef: %s not here" % name)
if ((defval & 1) != 1):
fatal("Must specify default value for option %s" % name)
if ((defval & 2) != 2):
fatal("Must specify export for option %s" % name)
if ((defval & 4) != 4):
fatal("Must specify comment for option %s" % name)
def loadoptions(path, file, rule):
file = os.path.join('src', path, file)
optionsfile = os.path.join(treetop, file)
fp = safe_open(optionsfile, 'r')
loc.push(file)
if (not parse(rule, fp.read())):
fatal("Could not parse file")
loc.pop()
def addinit(path):
global curimage, dirstack
if (path[0] == '/'):
curimage.setinitfile(treetop + '/src/' + path)
else:
curimage.setinitfile(dirstack.tos() + '/' + path)
print "Adding init file: %s" % path
def addconfig(path):
global partstack
curpart = partstack.tos()
curpart.addconfig(path)
def addregister(field, value):
global partstack
curpart = partstack.tos()
curpart.addregister(field, value)
def addcrt0include(path):
"""we do the crt0include as a dictionary, so that if needed we
can trace who added what when. Also it makes the keys
nice and unique."""
global curimage
curimage.addinitinclude(0, path)
def addinitinclude(str, path):
global curimage
curimage.addinitinclude(dequote(str), path)
def addldscript(path):
global curimage, dirstack
curdir = dirstack.tos()
if (path[0] == '/'):
fullpath = treetop + '/src/' + path
else:
fullpath = curdir + '/' + path
debug.info(debug.statement, "fullpath :%s: curdir :%s: path :%s:" % (fullpath, curdir, path))
curimage.addldscript(fullpath)
def payload(path):
global curimage
curimage.setpayload(path)
adduserdefine("PAYLOAD:=%s"%path)
def startromimage(name):
global romimages, curimage, target_dir, target_name
curpart = partstack.tos()
print "Configuring ROMIMAGE %s Curimage %s" % (name, curimage)
print "Curpart is %s\n" % curpart
o = getdict(romimages, name)
if (o):
fatal("romimage %s previously defined" % name)
curimage = romimage(name)
curimage.settargetdir(os.path.join(target_dir, name))
#o = partobj(curimage, target_dir, 0, 'board', target_name)
#curimage.setroot(o)
setdict(romimages, name, curimage)
dodir('/config', 'Config.lb')
def endromimage():
global curimage
mainboard()
print "End ROMIMAGE"
curimage = 0
#curpart = 0
def mainboardsetup(path):
global full_mainboard_path, mainboard_path
mainboard_path = os.path.join('mainboard', path)
loadoptions(mainboard_path, 'Options.lb', 'mainboardvariables')
full_mainboard_path = os.path.join(treetop, 'src', 'mainboard', path)
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
vendor = re.sub("/.*", "", path)
part_number = re.sub("[^/]*/", "", path)
setdefault('MAINBOARD', full_mainboard_path, 0)
setdefault('MAINBOARD_VENDOR', vendor, 0)
setdefault('MAINBOARD_PART_NUMBER', part_number, 0)
def mainboard():
global curimage, dirstack, partstack
file = 'Config.lb'
partdir = mainboard_path
srcdir = os.path.join(treetop, 'src')
fulldir = os.path.join(srcdir, partdir)
type_name = flatten_name(partdir)
newpart = partobj(curimage, fulldir, partstack.tos(), 'mainboard', \
type_name, 0, 'chip')
#print "Configuring PART %s" % (type)
partstack.push(newpart)
#print " new PART tos is now %s\n" %partstack.tos().info()
dirstack.push(fulldir)
loadoptions(mainboard_path, 'Options.lb', 'mainboardvariables')
# special case for 'cpu' parts.
# we could add a new function too, but this is rather trivial.
# if the part is a cpu, and we haven't seen it before,
# arrange to source the directory /cpu/'type'
doconfigfile(srcdir, partdir, file, 'cfgfile')
curimage.setroot(partstack.tos())
partpop()
def addbuildrom(filename, size, roms):
global buildroms
print "Build ROM size %d" % size
b = buildrom(filename, size, roms)
buildroms.append(b)
def addinitobject(object_name):
global curimage
curimage.addinitobjectrule(object_name)
def addobject(object_name):
global curimage
curimage.addobjectrule(object_name)
def adddriver(driver_name):
global curimage
curimage.adddriverrule(driver_name)
def target(name):
global target_dir, target_name
print "Configuring TARGET %s" % name
target_name = name
target_dir = os.path.join(os.path.dirname(loc.file()), name)
if not os.path.isdir(target_dir):
print "Creating directory %s" % target_dir
os.makedirs(target_dir)
print "Will place Makefile, crt0.S, etc. in %s" % target_dir
def cpudir(path):
global cpu_type
if (cpu_type and (cpu_type != path)):
fatal("Two different CPU types: %s and %s" % (cpu_type, path))
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
srcdir = "/cpu/%s" % path
dodir(srcdir, "Config.lb")
cpu_type = path
def devicepart(type):
global curimage, dirstack, partstack
newpart = partobj(curimage, 0, partstack.tos(), type, \
'', 0, 'device')
#print "Configuring PART %s" % (type)
partstack.push(newpart)
#print " new PART tos is now %s\n" %partstack.tos().info()
# just push TOS, so that we can pop later.
dirstack.push(dirstack.tos())
def part(type, path, file, name):
global curimage, dirstack, partstack
partdir = os.path.join(type, path)
srcdir = os.path.join(treetop, 'src')
fulldir = os.path.join(srcdir, partdir)
type_name = flatten_name(partdir)
newpart = partobj(curimage, fulldir, partstack.tos(), type, \
type_name, name, 'chip')
#print "Configuring PART %s, path %s" % (type, path)
partstack.push(newpart)
#print " new PART tos is now %s\n" %partstack.tos().info()
dirstack.push(fulldir)
# special case for 'cpu' parts.
# we could add a new function too, but this is rather trivial.
# if the part is a cpu, and we haven't seen it before,
# arrange to source the directory /cpu/'type'
if (type == 'cpu'):
cpudir(path)
else:
doconfigfile(srcdir, partdir, file, 'cfgfile')
def partpop():
global dirstack, partstack
curpart = partstack.tos()
if (curpart == 0):
fatal("Trying to pop non-existent part")
#print "End PART %s" % curpart.part
# Warn if options are used without being set in this part
for op in curpart.uses_options.keys():
if (not isset(op, curpart)):
notice("Option %s using default value %s" % (op, getformated(op, curpart.image)))
oldpart = partstack.pop()
dirstack.pop()
#print "partstack.pop, TOS is now %s\n" % oldpart.info()
def dodir(path, file):
"""dodir is like part but there is no new part"""
global dirstack
# if the first char is '/', it is relative to treetop,
# else relative to curdir
# os.path.join screws up if the name starts with '/', sigh.
print "Configuring DIR %s" % os.path.join(path, file)
if (path[0] == '/'):
fullpath = os.path.join(treetop, 'src')
path = re.sub('^/*', '', path)
else:
fullpath = dirstack.tos()
debug.info(debug.statement, "DODIR: path %s, fullpath %s" % (path, fullpath))
dirstack.push(os.path.join(fullpath, path))
doconfigfile(fullpath, path, file, 'cfgfile')
dirstack.pop()
def lookup(name):
global curimage
return getoption(name, curimage)
def addrule(id):
global curimage
curimage.addmakerule(id)
def adduserdefine(str):
global curimage
curimage.adduserdefine(str)
def addaction(id, str):
global curimage
curimage.addmakeaction(id, str)
def adddep(id, str):
global curimage
curimage.addmakedepend(id, str)
def setarch(my_arch):
"""arch is 'different' ... darn it."""
global curimage
print "SETTING ARCH %s\n" % my_arch
curimage.setarch(my_arch)
setdefault('ARCH', my_arch, 1)
part('arch', my_arch, 'Config.lb', 0)
def doconfigfile(path, confdir, file, rule):
rname = os.path.join(confdir, file)
loc.push(rname)
fullpath = os.path.join(path, rname)
fp = safe_open(fullpath, 'r')
if (not parse(rule, fp.read())):
fatal("Could not parse file")
exitiferrors()
loc.pop()
#=============================================================================
# MISC FUNCTIONS
#=============================================================================
def ternary(val, yes, no):
debug.info(debug.statement, "ternary %s" % expr)
debug.info(debug.statement, "expr %s a %d yes %d no %d"% (expr, a, yes, no))
if (val == 0):
debug.info(debug.statement, "Ternary returns %d" % yes)
return yes
else:
debug.info(debug.statement, "Ternary returns %d" % no)
return no
def tohex(name):
"""atoi is in the python library, but not strtol? Weird!"""
return eval('int(%s)' % name)
def IsInt(str):
""" Is the given string an integer?"""
try:
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
num = long(str)
return 1
except ValueError:
return 0
def dequote(str):
a = re.sub("^\"", "", str)
a = re.sub("\"$", "", a)
# highly un-intuitive, need four \!
a = re.sub("\\\\\"", "\"", a)
return a
def flatten_name(str):
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
a = re.sub("[/-]", "_", str)
return a
def topify(path):
"""If the first part of <path> matches treetop, replace
that part with $(TOP)"""
if path[0:len(treetop)] == treetop:
path = path[len(treetop):len(path)]
if (path[0:1] == "/"):
path = path[1:len(path)]
path = "$(TOP)/" + path
return path
%%
# to make if work without 2 passses, we use an old hack from SIMD, the
# context bit. If the bit is 1, then ops get done, otherwise
# ops don't get done. From the top level, context is always
# 1. In an if, context depends on eval of the if condition
parser Config:
ignore: r'\s+'
ignore: "#.*?\r?\n"
# less general tokens should come first, otherwise they get matched
# by the re's
token ACTION: 'action'
token ADDACTION: 'addaction'
token ALWAYS: 'always'
token ARCH: 'arch'
token BUILDROM: 'buildrom'
token COMMENT: 'comment'
token CONFIG: 'config'
token CPU: 'cpu'
token CPU_BUS: 'cpu_bus'
token CHIP: 'chip'
token DEFAULT: 'default'
token DEFINE: 'define'
token DEPENDS: 'depends'
token DEVICE: 'device'
token DIR: 'dir'
token DRIVER: 'driver'
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
token DRQ: 'drq'
token ELSE: 'else'
token END: 'end'
token EOF: '$'
token EQ: '='
token EXPORT: 'export'
token FORMAT: 'format'
token IF: 'if'
token INIT: 'init'
token INITOBJECT: 'initobject'
token INITINCLUDE: 'initinclude'
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
token IO: 'io'
token IRQ: 'irq'
token LDSCRIPT: 'ldscript'
token LOADOPTIONS: 'loadoptions'
token MAINBOARD: 'mainboard'
token MAINBOARDINIT: 'mainboardinit'
token MAKEDEFINE: 'makedefine'
token MAKERULE: 'makerule'
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
token MEM: 'mem'
token NEVER: 'never'
token NONE: 'none'
token NORTHBRIDGE: 'northbridge'
token OBJECT: 'object'
token OPTION: 'option'
token PAYLOAD: 'payload'
token PMC: 'pmc'
token PRINT: 'print'
token REGISTER: 'register'
token ROMIMAGE: 'romimage'
token SOUTHBRIDGE: 'southbridge'
token SUPERIO: 'superio'
token TARGET: 'target'
token USED: 'used'
token USES: 'uses'
token WRITE: 'write'
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
token NUM: '[0-9]+'
token HEX_NUM: '[0-9a-fA-F]+'
token HEX_PREFIX: '0x'
# Why is path separate? Because paths to resources have to at least
# have a slash, we thinks
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
token PATH: r'[-a-zA-Z0-9_.][-a-zA-Z0-9/_.]+[-a-zA-Z0-9_.]+'
# Dir's on the other hand are abitrary
# this may all be stupid.
token DIRPATH: r'[-a-zA-Z0-9_$()./]+'
token ID: r'[a-zA-Z_.]+[a-zA-Z0-9_.]*'
token DELEXPR: r'{([^}]+|\\.)*}'
token STR: r'"([^\\"]+|\\.)*"'
token RAWTEXT: r'.*'
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
token ON: 'on'
token OFF: 'off'
token PCI: 'pci'
token PNP: 'pnp'
token I2C: 'i2c'
token APIC: 'apic'
token APIC_CLUSTER: 'apic_cluster'
token CPU: 'cpu'
token CPU_BUS: 'cpu_bus'
token PCI_DOMAIN: 'pci_domain'
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
rule expr: logical {{ l = logical }}
( "&&" logical {{ l = l and logical }}
| "||" logical {{ l = l or logical }}
)* {{ return l }}
rule logical: factor {{ n = factor }}
( "[+]" factor {{ n = n+factor }}
| "-" factor {{ n = n-factor }}
)* {{ return n }}
rule factor: term {{ v = term }}
( "[*]" term {{ v = v*term }}
| "/" term {{ v = v/term }}
| "<<" term {{ v = v << term }}
| ">=" term {{ v = (v < term)}}
)* {{ return v }}
# A term is a number, variable, or an expression surrounded by parentheses
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
rule term: NUM {{ return long(NUM, 10) }}
| HEX_PREFIX HEX_NUM {{ return long(HEX_NUM, 16) }}
| ID {{ return lookup(ID) }}
| unop {{ return unop }}
| "\\(" expr "\\)" {{ return expr }}
rule unop: "!" expr {{ return not(expr) }}
rule partend<<C>>: (stmt<<C>>)* END {{ if (C): partpop()}}
# This is needed because the legacy cpu command could not distinguish
# between cpu vendors. It should just be PATH, but getting this change
# into the source tree will be tricky...
# DO NOT USE ID AS IT MAY GO AWAY IN THE FUTURE
rule partid: ID {{ return ID }}
| PATH {{ return PATH }}
# rule parttype: NORTHBRIDGE {{ return 'northbridge' }}
# | SUPERIO {{ return 'superio' }}
# | PMC {{ return 'pmc' }}
# | SOUTHBRIDGE {{ return 'southbridge' }}
# | CPU {{ return 'cpu' }}
# | CHIP {{ return '' }}
#
rule parttype: CHIP {{ return '' }}
rule partdef<<C>>: {{ name = 0 }}
parttype partid
[ STR {{ name = dequote(STR) }}
] {{ if (C): part(parttype, partid, 'Config.lb', name) }}
partend<<C>>
rule arch<<C>>: ARCH ID {{ if (C): setarch(ID) }}
partend<<C>>
rule mainboardinit<<C>>:
MAINBOARDINIT DIRPATH {{ if (C): addcrt0include(DIRPATH)}}
rule initinclude<<C>>:
INITINCLUDE
STR
DIRPATH {{ if (C): addinitinclude(STR, DIRPATH)}}
rule initobject<<C>>:
INITOBJECT DIRPATH {{ if (C): addinitobject(DIRPATH)}}
rule object<<C>>: OBJECT DIRPATH {{ if (C): addobject(DIRPATH)}}
rule driver<<C>>: DRIVER DIRPATH {{ if (C): adddriver(DIRPATH)}}
rule dir<<C>>: DIR DIRPATH {{ if (C): dodir(DIRPATH, 'Config.lb') }}
rule default<<C>>: DEFAULT ID EQ value {{ if (C): setdefault(ID, value, 0) }}
rule ldscript<<C>>: LDSCRIPT DIRPATH {{ if (C): addldscript(DIRPATH) }}
rule iif<<C>>: IF ID {{ c = lookup(ID) }}
(stmt<<C and c>>)*
[ ELSE (stmt<<C and not c>>)* ]
END
rule depsacts<<ID, C>>:
( DEPENDS STR {{ if (C): adddep(ID, STR) }}
| ACTION STR {{ if (C): addaction(ID, STR) }}
)*
rule makerule<<C>>: MAKERULE DIRPATH {{ if (C): addrule(DIRPATH) }}
depsacts<<DIRPATH, C>>
END
rule makedefine<<C>>:
MAKEDEFINE RAWTEXT {{ if (C): adduserdefine(RAWTEXT) }}
rule addaction<<C>>:
ADDACTION ID STR {{ if (C): addaction(ID, STR) }}
rule init<<C>>: INIT DIRPATH {{ if (C): addinit(DIRPATH) }}
rule field: STR {{ return STR }}
rule register<<C>>: REGISTER field '=' STR {{ if (C): addregister(field, STR) }}
rule enable<<C>>: {{ val = 1 }}
( ON {{ val = 1 }}
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
| OFF {{ val = 0 }}
) {{ if(C): partstack.tos().set_enabled(val) }}
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
rule resource<<C>>: {{ type = "" }}
( IO {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO" }}
| MEM {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_MEM" }}
| IRQ {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IRQ" }}
| DRQ {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_DRQ" }}
- Moved hlt() to it's own header. - Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11 16:01:31 +01:00
)
term '=' {{ index = term }}
term {{ value = term }}
{{ if (C): partstack.tos().add_resource(type, index, value) }}
rule resources<<C>>: {{ if (C): partstack.tos().start_resources() }}
( resource<<C>> )*
{{ if (C): partstack.tos().end_resources() }}
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
rule pci<<C>>: PCI {{ if (C): devicepart('pci') }}
HEX_NUM {{ slot = int(HEX_NUM,16) }}
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
'.' HEX_NUM {{ function = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addpcipath(slot, function) }}
rule pci_domain<<C>>:
PCI_DOMAIN {{ if (C): devicepart('pci_domain') }}
HEX_NUM {{ pci_domain = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addpci_domainpath(pci_domain) }}
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
rule pnp<<C>>: PNP {{ if (C): devicepart('pnp') }}
HEX_NUM {{ port = int(HEX_NUM,16) }}
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
'.' HEX_NUM {{ device = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addpnppath(port, device) }}
rule i2c<<C>>: I2C {{ if (C): devicepart('i2c') }}
HEX_NUM {{ device = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addi2cpath(device) }}
rule apic<<C>>: APIC {{ if (C): devicepart('apic') }}
HEX_NUM {{ apic_id = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addapicpath(apic_id) }}
rule apic_cluster<<C>>: APIC_CLUSTER {{ if (C): devicepart('apic_cluster') }}
HEX_NUM {{ cluster = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addapic_clusterpath(cluster) }}
rule cpu<<C>>: CPU {{ if (C): devicepart('cpu') }}
HEX_NUM {{ id = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addcpupath(id) }}
rule cpu_bus<<C>>: CPU_BUS {{ if (C): devicepart('cpu_bus') }}
HEX_NUM {{ id = int(HEX_NUM, 16) }}
{{ if (C): partstack.tos().addcpu_buspath(id) }}
rule dev_path<<C>>:
pci<<C>> {{ return pci }}
| pci_domain<<C>> {{ return pci_domain }}
| pnp<<C>> {{ return pnp }}
| i2c<<C>> {{ return i2c }}
| apic<<C>> {{ return apic }}
| apic_cluster<<C>> {{ return apic_cluster }}
| cpu<<C>> {{ return cpu }}
| cpu_bus<<C>> {{ return cpu_bus }}
rule prtval: expr {{ return str(expr) }}
| STR {{ return STR }}
rule prtlist: prtval {{ el = "%(" + prtval }}
( "," prtval {{ el = el + "," + prtval }}
)* {{ return el + ")" }}
rule prtstmt<<C>>: PRINT STR {{ val = STR }}
[ "," prtlist {{ val = val + prtlist }}
] {{ if (C): print eval(val) }}
rule config<<C>>: CONFIG PATH {{ if (C): addconfig(PATH) }}
rule device<<C>>: DEVICE dev_path<<C>>
enable<<C>>
resources<<C>>
partend<<C>>
rule stmt<<C>>: arch<<C>> {{ return arch}}
| addaction<<C>> {{ return addaction }}
| config<<C>> {{ return config}}
| default<<C>> {{ return default}}
| dir<<C>> {{ return dir}}
| driver<<C>> {{ return driver }}
| iif<<C>> {{ return iif }}
| init<<C>> {{ return init }}
| initinclude<<C>> {{ return initinclude }}
| initobject<<C>> {{ return initobject }}
| ldscript<<C>> {{ return ldscript}}
| mainboardinit<<C>> {{ return mainboardinit }}
| makedefine<<C>> {{ return makedefine }}
| makerule<<C>> {{ return makerule }}
| object<<C>> {{ return object }}
| option<<C>> {{ return option }}
| partdef<<C>> {{ return partdef }}
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
| prtstmt<<C>> {{ return prtstmt }}
| register<<C>> {{ return register }}
| device<<C>> {{ return device }}
# ENTRY for parsing Config.lb file
rule cfgfile: (uses<<1>>)*
(stmt<<1>>)*
EOF {{ return 1 }}
rule cfgfile: (uses<<1>>)*
(stmt<<1>>)*
EOF {{ return 1 }}
rule usesid<<C>>: ID {{ if (C): usesoption(ID) }}
rule uses<<C>>: USES (usesid<<C>>)+
rule mainboardvariables: (uses<<1>>)*
(default<<1>>)*
(option<<1>>)*
END {{ return 1}}
rule value: STR {{ return dequote(STR) }}
| expr {{ return expr }}
| DELEXPR {{ return DELEXPR }}
rule option<<C>>: OPTION ID EQ value {{ if (C): setoption(ID, value, 0) }}
rule opif<<C>>: IF ID {{ c = lookup(ID) }}
(opstmt<<C and c>>)*
[ ELSE (opstmt<<C and not c>>)* ]
END
rule opstmt<<C>>: option<<C>>
| opif<<C>>
| prtstmt<<C>>
rule payload<<C>>: PAYLOAD DIRPATH {{ if (C): payload(DIRPATH) }}
rule mainboard:
MAINBOARD PATH {{ mainboardsetup(PATH) }}
rule romif<<C>>: IF ID {{ c = lookup(ID) }}
(romstmt<<C and c>>)*
[ ELSE (romstmt<<C and not c>>)* ]
END
rule romstmt<<C>>: romif<<C>>
| option<<C>>
| payload<<C>>
rule romimage: ROMIMAGE STR {{ startromimage(dequote(STR)) }}
(romstmt<<1>>)*
END {{ endromimage() }}
rule roms: STR {{ s = '[' + STR }}
( STR {{ s = s + "," + STR }}
)* {{ return eval(s + ']') }}
rule buildrom: BUILDROM DIRPATH expr roms {{ addbuildrom(DIRPATH, expr, roms) }}
rule romstmts: romimage
| buildrom
| opstmt<<1>>
# ENTRY for parsing root part
rule board: {{ loadoptions("config", "Options.lb", "options") }}
TARGET DIRPATH {{ target(DIRPATH) }}
mainboard
(romstmts)*
EOF {{ return 1 }}
# ENTRY for parsing a delayed value
rule delexpr: "{" expr "}" EOF {{ return expr }}
rule wrstr<<ID>>: STR {{ setwrite(ID, dequote(STR)) }}
rule defstmts<<ID>>: {{ d = 0 }}
( DEFAULT
( value {{ setdefault(ID, value, 1) }}
| NONE {{ setnodefault(ID) }}
) {{ d = d | 1 }}
| FORMAT STR {{ setformat(ID, dequote(STR)) }}
| EXPORT
( ALWAYS {{ setexported(ID) }}
| USED {{ setexportable(ID) }}
| NEVER {{ setnoexport(ID) }}
) {{ d = d | 2 }}
| COMMENT STR {{ setcomment(ID, dequote(STR)); d = d | 4 }}
| WRITE (wrstr<<ID>>)+
)+ {{ return d }}
rule define: DEFINE ID {{ newoption(ID) }}
defstmts<<ID>> END {{ validdef(ID, defstmts) }}
# ENTRY for parsing Options.lb file
rule options: (define)* EOF {{ return 1 }}
%%
#=============================================================================
# FILE OUTPUT
#=============================================================================
def writemakefileheader(file, fname):
file.write("# File: %s is autogenerated\n" % fname)
def writemakefilefooter(file, fname):
file.write("\n\n%s: %s %s\n"
% (os.path.basename(fname), os.path.abspath(sys.argv[0]), top_config_file))
file.write("\t(cd %s ; %s %s %s)\n\n"
% (os.getcwd(), sys.argv[0], sys.argv[1], sys.argv[2]))
def writemakefilesettings(path):
""" Write Makefile.settings to seperate the settings
from the actual makefile creation."""
global treetop, target_dir
filename = os.path.join(path, "Makefile.settings")
print "Creating", filename
file = safe_open(filename, 'w+')
writemakefileheader(file, filename)
file.write("TOP:=%s\n" % (treetop))
file.write("TARGET_DIR:=%s\n" % target_dir)
writemakefilefooter(file, filename)
file.close()
def writeimagesettings(image):
"""Write Makefile.settings to seperate the settings
from the actual makefile creation."""
global treetop
global global_options_by_order
filename = os.path.join(image.gettargetdir(), "Makefile.settings")
print "Creating", filename
file = safe_open(filename, 'w+')
writemakefileheader(file, filename)
file.write("TOP:=%s\n" % (treetop))
file.write("TARGET_DIR:=%s\n" % (image.gettargetdir()))
file.write("\n")
exported = []
for o in global_exported_options:
exported.append(o)
for o in image.exported_options:
if (not o in exported):
exported.append(o)
for o in exported:
file.write("export %s:=" % o.name)
if (hasvalue(o.name, image)):
file.write("%s" % getformated(o.name, image))
file.write("\n")
file.write("\n")
file.write("export VARIABLES :=\n")
for o in exported:
file.write("export VARIABLES += %s\n" % o.name)
file.write("\n")
writemakefilefooter(file,filename)
file.close()
# write the romimage makefile
# let's try the Makefile
# first, dump all the -D stuff
def writeimagemakefile(image):
makefilepath = os.path.join(image.gettargetdir(), "Makefile")
print "Creating", makefilepath
file = safe_open(makefilepath, 'w+')
writemakefileheader(file, makefilepath)
# main rule
file.write("\nall: linuxbios.rom\n\n")
file.write(".PHONY: all\n\n")
#file.write("include cpuflags\n")
# Putting "include cpuflags" in the Makefile has the problem that the
# cpuflags file would be generated _after_ we want to include it.
# Instead, let make do the work of computing CPUFLAGS:
file.write("# Get the value of TOP, VARIABLES, and several other variables.\n")
file.write("include Makefile.settings\n\n")
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
file.write("# Function to create an item like -Di586 or -DCONFIG_MAX_CPUS='1' or -Ui686\n")
file.write("D_item = $(if $(subst undefined,,$(origin $1)),-D$1$(if $($1),='$($1)',),-U$1)\n\n")
file.write("# Compute the value of CPUFLAGS here during make's first pass.\n")
file.write("CPUFLAGS := $(foreach _var_,$(VARIABLES),$(call D_item,$(_var_)))\n\n")
for i in image.getuserdefines():
file.write("%s\n" %i)
file.write("\n")
# print out all the object dependencies
file.write("\n# object dependencies (objectrules:)\n")
file.write("INIT-OBJECTS :=\n")
file.write("OBJECTS :=\n")
file.write("DRIVER :=\n")
file.write("\nSOURCES :=\n")
for irule, init in image.getinitobjectrules().items():
i_name = init[0]
i_source = init[1]
file.write("INIT-OBJECTS += %s\n" % (i_name))
file.write("SOURCES += %s\n" % (i_source))
for objrule, obj in image.getobjectrules().items():
obj_name = obj[0]
obj_source = obj[1]
file.write("OBJECTS += %s\n" % (obj_name))
file.write("SOURCES += %s\n" % (obj_source))
# for chip_target.c
file.write("OBJECTS += static.o\n")
file.write("SOURCES += static.c\n")
for driverrule, driver in image.getdriverrules().items():
obj_name = driver[0]
obj_source = driver[1]
file.write("DRIVER += %s\n" % (obj_name))
file.write("SOURCES += %s\n" % (obj_source))
# Print out all ldscript.ld dependencies.
file.write("\n# ldscript.ld dependencies:\n")
file.write("LDSUBSCRIPTS-1 := \n" )
for script in image.getldscripts():
file.write("LDSUBSCRIPTS-1 += %s\n" % topify(script))
# Print out the dependencies for crt0_includes.h
file.write("\n# Dependencies for crt0_includes.h\n")
file.write("CRT0_INCLUDES:=\n")
for inc in image.getinitincludes():
if (local_path.match(inc)):
file.write("CRT0_INCLUDES += %s\n" % inc)
else:
file.write("CRT0_INCLUDES += $(TOP)/src/%s\n" % inc)
# Print out the user defines.
file.write("\n# userdefines:\n")
# Print out the base rules.
# Need to have a rule that counts on 'all'.
file.write("\n# mainrulelist:")
# Print out any user rules.
file.write("\n# From makerule or docipl commands:\n")
file.write("\n# initobjectrules:\n")
for irule, init in image.getinitobjectrules().items():
source = topify(init[1])
type = init[2]
if (type == 'S'):
# for .S, .o depends on .s
file.write("%s: %s.s\n" % (init[0], init[3]))
file.write("\t@echo $(CC) ... -o $@ $<\n")
file.write("\t$(CC) -c $(CPU_OPT) -o $@ $<\n")
# and .s depends on .S
file.write("%s.s: %s\n" % (init[3], source))
file.write("\t@echo $(CPP) ... $< > $@\n")
# Note: next 2 lines are ONE output line!
file.write("\t$(CPP) $(CPPFLAGS) $< ")
file.write(">$@.new && mv $@.new $@\n")
else:
file.write("%s: %s\n" % (init[0], source))
file.write("\t$(CC) -c $(CFLAGS) -o $@ $<\n")
file.write("\n# objectrules:\n")
for objrule, obj in image.getobjectrules().items():
source = topify(obj[1])
type = obj[2]
if (type == 'S'):
# for .S, .o depends on .s
file.write("%s: %s.s\n" % (obj[0], obj[3]))
file.write("\t@echo $(CC) ... -o $@ $<\n")
file.write("\t$(CC) -c $(CPU_OPT) -o $@ $<\n")
# and .s depends on .S
file.write("%s.s: %s\n" % (obj[3], source))
file.write("\t@echo $(CPP) ... $< > $@\n")
# Note: next 2 lines are ONE output line!
file.write("\t$(CPP) $(CPPFLAGS) $< ")
file.write(">$@.new && mv $@.new $@\n")
else:
file.write("%s: %s\n" % (obj[0], source))
file.write("\t$(CC) -c $(CFLAGS) -o $@ $<\n")
#file.write("%s\n" % objrule[2])
for driverrule, driver in image.getdriverrules().items():
source = topify(driver[1])
file.write("%s: %s\n" % (driver[0], source))
file.write("\t$(CC) -c $(CFLAGS) -o $@ $<\n")
#file.write("%s\n" % objrule[2])
# special rule for chip_target.c
file.write("static.o: static.c\n")
file.write("\t$(CC) -c $(CFLAGS) -o $@ $<\n")
# Print out the rules that will make cause the files
# generated by NLBConfig.py to be remade if any dependencies change.
file.write("\n# Remember the automatically generated files\n")
file.write("GENERATED:=\n")
for genfile in ['Makefile',
'nsuperio.c',
'static.c',
'LinuxBIOSDoc.config' ]:
file.write("GENERATED += %s\n" % genfile)
file.write("GENERATED += %s\n" % image.getincludefilename())
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
keys = global_options_by_order
keys.sort()
file.write("\necho:\n")
for key in keys:
file.write("\t@echo %s='$(%s)'\n"% (key,key))
for i, m in image.getmakerules().items():
file.write("%s: " %i)
for i in m.dependency:
file.write("%s " % i)
file.write("\n")
for i in m.actions:
file.write("\t%s\n" % i)
writemakefilefooter(file, makefilepath)
file.close()
#
def writemakefile(path):
makefilepath = os.path.join(path, "Makefile")
print "Creating", makefilepath
file = safe_open(makefilepath, 'w+')
writemakefileheader(file, makefilepath)
# main rule
file.write("\nall:")
for i in buildroms:
file.write(" %s" % i.name)
file.write("\n\n")
file.write("include Makefile.settings\n\n")
for i, o in romimages.items():
file.write("%s/linuxbios.rom:\n" % o.getname())
file.write("\tif (cd %s; \\\n" % o.getname())
file.write("\t\tmake linuxbios.rom)\\\n")
file.write("\tthen true; else exit 1; fi;\n\n")
file.write("clean: ")
for i in romimages.keys():
file.write(" %s-clean" % i)
file.write("\n\n")
for i, o in romimages.items():
file.write("%s-clean:\n" % o.getname())
file.write("\t(cd %s; make clean)\n\n" % o.getname())
for i in buildroms:
file.write("%s:" % i.name)
for j in i.roms:
file.write(" %s/linuxbios.rom " % j)
file.write("\n")
file.write("\t cat ")
for j in i.roms:
file.write(" %s/linuxbios.rom " % j)
file.write("> %s\n\n" %i.name)
file.write(".PHONY: all clean")
for i in romimages.keys():
file.write(" %s-clean" % i)
for i, o in romimages.items():
file.write(" %s/linuxbios.rom" % o.getname())
file.write("\n\n")
writemakefilefooter(file, makefilepath)
file.close()
def writeinitincludes(image):
global include_pattern
filepath = os.path.join(image.gettargetdir(), image.getincludefilename())
print "Creating", filepath
outfile = safe_open(filepath, 'w+')
if (image.newformat()):
infile = safe_open(image.getinitfile(), 'r')
line = infile.readline()
while (line):
p = include_pattern.match(line)
if (p):
for i in image.getinitincludes():
inc = image.getinitinclude(i)
if (inc.getstring() == p.group(1)):
outfile.write("#include \"%s\"\n" % inc.getpath())
else:
outfile.write(line)
line = infile.readline()
infile.close()
else:
for i in image.getinitincludes():
outfile.write("#include <%s>\n" % i)
outfile.close()
def writeldoptions(image):
"""Write ldoptions file."""
filename = os.path.join(image.gettargetdir(), "ldoptions")
print "Creating", filename
file = safe_open(filename, 'w+')
for o in global_exported_options:
if (hasvalue(o.name, image) and IsInt(getoption(o.name, image))):
file.write("%s = %s;\n" % (o.name, getformated(o.name, image)))
for o in image.exported_options:
if (not o in global_exported_options and hasvalue(o.name, image) and IsInt(getoption(o.name, image))):
file.write("%s = %s;\n" % (o.name, getformated(o.name, image)))
file.close()
def dumptree(part, lvl):
debug.info(debug.dumptree, "DUMPTREE ME is")
part.dumpme(lvl)
# dump the siblings -- actually are there any? not sure
# siblings are:
debug.info(debug.dumptree, "DUMPTREE SIBLINGS are")
kid = part.next_sibling
while (kid):
kid.dumpme(lvl)
kid = kid.next_sibling
# dump the kids
debug.info(debug.dumptree, "DUMPTREE KIDS are")
#for kid in part.children:
if (part.children):
dumptree(part.children, lvl+1)
kid = part.next_sibling
while (kid):
if (kid.children):
dumptree(kid.children, lvl + 1)
kid = kid.next_sibling
debug.info(debug.dumptree, "DONE DUMPTREE")
def writecode(image):
filename = os.path.join(img_dir, "static.c")
print "Creating", filename
file = safe_open(filename, 'w+')
file.write("#include <device/device.h>\n")
- Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02 01:17:58 +02:00
file.write("#include <device/pci.h>\n")
for path in image.getconfigincludes().values():
file.write("#include \"%s\"\n" % path)
gencode(image.getroot(), file, 0)
gencode(image.getroot(), file, 1)
file.close()
def gencode(part, file, pass_num):
debug.info(debug.gencode, "GENCODE ME is")
part.gencode(file, pass_num)
# dump the siblings -- actually are there any? not sure
debug.info(debug.gencode, "GENCODE SIBLINGS are")
kid = part.next_sibling
while (kid):
kid.gencode(file, pass_num)
kid = kid.next_sibling
# now dump the children
debug.info(debug.gencode, "GENCODE KIDS are")
if (part.children):
gencode(part.children, file, pass_num)
kid = part.next_sibling
while (kid):
if (kid.children):
gencode(kid.children, file, pass_num)
kid = kid.next_sibling
debug.info(debug.gencode, "DONE GENCODE")
def verifyparse():
"""Add any run-time checks to verify that parsing the configuration
was successful"""
for image in romimages.values():
print("Verifying ROMIMAGE %s" % image.name)
if (image.newformat() and image.getinitfile() == ''):
fatal("An init file must be specified")
for op in image.exported_options:
if (getoptionvalue(op.name, op, image) == 0 and getoptionvalue(op.name, op, 0) == 0):
warning("Exported option %s has no value (check Options.lb)" % op.name);
print("Verifing global options")
for op in global_exported_options:
if (getoptionvalue(op.name, op, 0) == 0):
notice("Exported option %s has no value (check Options.lb)" % op.name);
#=============================================================================
# MAIN PROGRAM
#=============================================================================
if __name__=='__main__':
from sys import argv
if (len(argv) < 3):
fatal("Args: <file> <path to linuxbios>")
top_config_file = os.path.abspath(sys.argv[1])
treetop = os.path.abspath(sys.argv[2])
# Now read in the customizing script...
loc.push(argv[1])
fp = safe_open(argv[1], 'r')
if (not parse('board', fp.read())):
fatal("Could not parse file")
loc.pop()
verifyparse()
# no longer need to check if an options has been used
alloptions = 1
for image_name, image in romimages.items():
if (debug.level(debug.dumptree)):
debug.info(debug.dumptree, "DEVICE TREE:")
dumptree(image.getroot(), 0)
img_dir = image.gettargetdir()
if not os.path.isdir(img_dir):
print "Creating directory %s" % img_dir
os.makedirs(img_dir)
if (debug.level(debug.dump)):
for i in image.getinitincludes():
debug.info(debug.dump, "crt0include file %s" % i)
for i in image.getdriverrules().keys():
debug.info(debug.dump, "driver file %s" % i)
for i in image.getldscripts():
debug.info(debug.dump, "ldscript file %s" % i)
for i, m in image.getmakerules().items():
debug.info(debug.dump, " makerule %s dep %s act %s" % (i, m.dependency, m.actions))
writecode(image)
writeimagesettings(image)
writeinitincludes(image)
writeimagemakefile(image)
writeldoptions(image)
writemakefilesettings(target_dir)
writemakefile(target_dir)
sys.exit(0)