This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change I9dd8e4027be21363015cd8df9918610e206afce2 replaces
colons with underscores in paths, to improve compatibility of paths.
This breaks any attempt to interpret the timestamp part of the tree
as a timestamp, so revert the change before doing so.
Change-Id: I0e82e4045120700e9b4fcc8c6e54d761068eaea3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/13766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The commit description is enough and this avoids hourly updates of the
timestamp by a cron job.
Change-Id: I30e9fcf28caf94edbb816c22bc8fbcb7ab09ae6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I952a694f645caf9d9726965e39afc09c6fdce0e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I1240c215f3d6c3934911c096e2ecbabff175d501
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13740
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If we only need to "combo" two PSP directories into one image,
we can put first address in romsig 0x10 and second one in
romsig 0x14.
If we really need to put three, the 0x14 is the combo directory
which points to multiple level-2 PSP directories.
I guess that two PSP can also use combo directory, with only
one level-2 directory. But nobody seems to do that.
Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This changes how we build and use cbfstool:
1. If build/cbfstool exists, use it.
2. Otherwise, try util/cbfstool/cbfstool.
3. As a last resort, build it and clean it when we're done.
Hopefully this will resolve issues people have had with permissions
and reduce overhead of building cbfstool when not necessary.
Change-Id: I5de6581ca765e5a8420b101a5865ddd633334b9c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12490
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is a pretty basic script that can be downloaded with wget to a
ubuntu-based live image, and will set it up so that the board_status
script can connect and run cbmem.
1) Verify that this is being run on a ubuntu-based live image by
checking for the installer.
2) Install and configure the ssh server.
3) Set a root password 'coreboot' so that root can log in.
4) download and build cbmem.
5) find and print the IP(s) that should be used to connect.
Change-Id: I068423c9f5501b156f25371d89559f4a206916b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13648
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Drop buggy duplicate implementation of intXX handlers
and provide enough glue to use all of YABEL.
Change-Id: I2db77a56a2a991cb84876456dcbb3a843a0d9754
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12117
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
In accordance to change I8bd981c4696c174152cf41caefa6c083650d283a
change autoport as well, as suggested by Vladimir.
Change-Id: I7cdaa779c11fd3f791a3ad213c24d927b5da76b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13731
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Power 8 was once again having build issues. Adding --with-system-zlib
fixes them. It seems the builtin one is only needed when you are going
to build programs, and it falls apart in other cases.
Searching --with-system-zlib reveals this to be a very popular topic.
This has not broken other toolchain builds (for me); it should not for
anyone else. Then again, this is gcc, about which I need say no more.
Change-Id: Ica9d057d88982543b5dda471cc949c31fe15932f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
oldconfig is regularly used to clean up templates that sometimes contain
duplicates or old symbols.
Since it cleans up the config, it doesn't need to fail on issues.
Change-Id: Ife0e9e3b9bfdde1eb6be0e2e38e81b9042cb7950
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13687
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Apparently acpica-unix is shipped under
"A non-open source license (the 'Intel license')" while acpica-unix2
comes under GPLv2/BSD dual license. (see https://acpica.org/Licensing)
So go with unix2.
Change-Id: I412812187bbf488eb4ad6d7fb8d2840f2f5e06d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13686
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool has a routine to deal with old images that may encourage it to
overwrite the master header. That routine is triggered for
"cbfstool add-master-header" prepared images even though these are not
at risk, and - worse - destroys the chain structure (through a negative
file length), so avoid touching such images.
Change-Id: I9d0bbe3e6300b9b9f3e50347737d1850f83ddad8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13672
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When updating an old .config file that has a symbol that has been
removed from the current Kconfig tree, kconfig will generate a warning
and fail to save the updated file. This is incredibly annoying, and
not the goal when trying to eliminate Kconfig warnings.
Instead of generating a warning, just print a message that it's being
ignored. This will remove the offending symbol, while allowing the
updated config file to be saved.
Split the change from 1 line to 3 lines to keep it at 80 characters.
Change-Id: I09d5775c9ed14bde80077b51b862a7f41bee098a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13674
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
off_t wants to be printed with %zd, not %d.
Change-Id: I3f6e1988bb306f4a7738f1f3ccb2093518e4ceb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13655
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Make sure that the statically defined CRC functions are
enabled by the same conditionals as the code using them.
Change-Id: Ic24e2ed1a80b8e5f6623881b08d86f7b608a206e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13654
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
dep has not been defined (and will hence break the build)
LDFLAGS is not used.
Change-Id: I4f91e1e7a176367aa4e1a1c63a2afc0b3186767e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13653
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add the doimage sources in util/marvell
- Add dependency in root makefile
- Add dependency in makefile for armada38x soc
BUG=chrome-os-partner:47462
TEST=emerge-cyclone coreboot
BRANCH=tot
Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab
Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9
Original-Signed-off-by: Kefei Yao <kfyao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/318046
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add lint-stable script with just error checking
- Enable warnings in addition to errors in non-stable test.
- Use git grep if the code is in a git repo now that exclusions are
working.
- Check for perl, and ask the user to install it if it isn't
available.
Change-Id: Ie60d21f4ef8a61d879f116eb2056eb805b0a55f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13542
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Make the gcc build system create multiple libgcc.a instances for
different ABIs.
Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13625
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the same time remove few native gfx options which were improperly set
and only added dead code to the binary.
Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13649
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
To be able to run this as a lint-stable test, demote these to warnings
for now. After the current CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
issues get fixed, these can be promoted again.
Change-Id: I1432980eb0c871fc61c12dcc351f8d46513a7965
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13541
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This looks at the coreboot codebase for the IS_ENABLED macro, and
gives an error if there is a symbol used without the CONFIG_ prefix.
This only works for symbols of type bool.
A future check will be added for all symbols, but that will take
a significant amount of time to run, because each symbol will need
to be searched for individually.
Change-Id: I92f2de2d231610d1a788da965f21966d89c2f25c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is needed for stout EC init.
Change-Id: I5c73499c17763229840152a473a2d820802ee2f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13535
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We prefer the default AT&T dialect on x86
Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13135
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This patch adds strings for the timestamp changes and additions in the
Chrome OS bootloader (depthcharge). See http://crosreview.com/323783
for details and justification.
BRANCH=none
BUG=None
TEST=Booted Oak, confirmed that cbmem output includes new timestamps.
Change-Id: I9ad68edca660f4e4286e680316b4e14f1259d1bc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1b1f6d669f62217ed701cd3561b9d14973d890a
Original-Change-Id: I7256ca62c69f2ab7279fd2656fbbfa610e04fc44
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323871
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13576
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I forgot to add that when I added support to buildgcc.
Change-Id: I586d64805e72f9512057a4e0698bdee19cc53146
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13568
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Idee4eb5d112e3f6bffced0681e9112101bed6763 has renamed
the architecture by accident. Rename it back.
Change-Id: I5509d2aa09df513789325bc24d9b696a09cb898f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
This makes the cross{gcc,tools}-* targets build iasl again, without
building it many times for cross{gcc,tools}
Change-Id: I7546c2af5f7cce3a4f1a08f593fb5cbc675d69ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13564
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Update the qconf.cc and qconf.h to upstream code, which added support
of QT5 and removed the support of QT3.
All code is ported from kernel.org, with only one line added to qconf.cc.
int kconfig_warnings = 0;
Change-Id: Ice77cddcc00e43375039379978e55f42acf867f7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13130
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of instructing users to edit xcompile when they want to build
a quark platform, give the build a way to set -march=586 so that
the quark code will build correctly. The Quark processor does not
support the instructions introduced with the Pentium 6 architecture.
Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13552
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
There is a lot of potential to completely get rid of Makefile
and keep everything in Makefile.inc, but for now this declutters
the main Makefile.inc.
Change-Id: I653313c74207f955514c036c81efcbfd988827c9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of passing a variable around and painstakingly making sure that
one target builds with it, and the others without, make IASL a
dependency of the "catch all" targets.
This also drops iasl as dependency from individual architecture targets,
but things are more orthogonal that way.
Note: instead of `make crossgcc-i386`, use `make crossgcc-i386 iasl`
Change-Id: I8cd2e89acdd0f795836571470bad28fbf8797f58
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13563
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some Chrome ECs are based on that architecture
Change-Id: Ib5d0c2f6f518fafc1ceb02c5f71c0935d16c66bb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13562
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ARM target can compile for much more than just v7a.
Change-Id: Ia4f67abcffdfe9c56c5d1848c75dfea83755e755
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13517
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If the GPLv2 or GPLv2+ license header is being used on a
coreboot file, make sure it has two paragraphs as specified by
the Common License Header section in the developer guidelines
in the coreboot wiki.
Change-Id: Ifffa0fa7272f5a4b129d4b7b8a515f8795bc2401
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the ability to release a given commit id, and normalize the tarballs
to use coreboot/1000 for owner and group, and the last commit date as
mtime for all files.
Change-Id: Ia349f429090fe9804f7f14c226812646e2f712be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13514
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Not much testing, update mostly so we can test with the
latest scan-build.
Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13516
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The compiler really supports a whole line of ARM CPUs, not just
ARMv7a:
arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a
armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m
armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m
armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native
So let's reflect this in the cross compiler name.
Change-Id: I717760d80954655b2de9ae019b813d81e9a75762
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The readme describes the operation and usage of kconfig_lint.
It also lists all the notes, warnings, and errors that kconfig_lint
looks for.
Change-Id: I873f394ff93fce42cd9638cbbad6134f1aef3a6a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13464
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't warn on Kconfig.orig and Kconfig~ files when trying to verify
that all the Kconfig files in the coreboot source tree are being loaded.
Change-Id: Ie7babe60b29735e5ccc5f93f4e42ad82dfb47044
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13462
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- The prompts were not getting incremented, so each prompt for a symbol
would overwrite the previous.
- Record the menu each prompt is in.
Change-Id: Ia282a30344d5e135f4f2027be9aff0e49a4e5edb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Although there's no reason we COULDN'T use tristate types, we haven't
up to this point. If there's a good reason to use them in the future,
this check can be removed.
Change-Id: I5f1903341f522bc957e394bc0fd288ba1adab431
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I7fed8b9fa827cb14f7373e7b774acc56e43cb6ff
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13459
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes at least one kconfig_lint warning.
Change-Id: I35edf57e90315a8372aaf3b41e923cd8dad7386a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13458
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The configuration that coreboot uses for setting selected symbols
typically involves a structure like this:
config BLEH_SPECIFIC_OPTIONS
def_bool y
select SYMBOL
This leads to an an extra kconfig symbol BLEH_SPECIFIC_OPTIONS
that is never referenced by anything else, generating a warning.
Since this is currently the construct that coreboot uses, filter it
out of the warnings for now.
Change-Id: I85a95e4c4e8469870c7f219f2a92955819845573
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13457
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I69a1e0b30fecca152e02a511c82248b6091b3d8b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13456
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Gnu make won't build in directories that have a colon in their name.
When the makefile expands a variable containing a dirctory name that
has colons in it, it seems to interpret that as a makefile target, and
fails the build.
Many other characters also confuse the makefiles, including spaces,
ampersand symbols, dollar signs, etc.
I've started including scripts into the board-status directories to
do the build of the rom that was tested, and this is preventing them
from working without renaming the directory before doing the build.
Change-Id: I9dd8e4027be21363015cd8df9918610e206afce2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13490
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While assembling CBFS images within the RW slots on Chrome OS
machines the current approach is to 'cbfstool copy' from the
RO CBFS to each RW CBFS. Additional fixups are required such
as removing unneeded files from the RW CBFS (e.g. verstage)
as well as removing and adding back files with the proper
arguments (FSP relocation as well as romstage XIP relocation).
This ends up leaving holes in the RW CBFS. To speed up RW
CBFS slot hashing it's beneficial to pack all non-empty files
together at the beginning of the CBFS. Therefore, provide
the 'compact' command which bubbles all the empty entries to
the end of the CBFS.
Change-Id: I8311172d71a2ccfccab384f8286cf9f21a17dec9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13479
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to more easily process the output of 'cbfstool print'
with other tools provide a -k option which spits out the
tab-separated header and fields:
Name Offset Type Metadata Size Data Size Total Size
ALIGN_UP(Offset + Total Size, 64) would be the start
of the next entry. Also, one can analzye the overhead
and offsets of each file more easily.
Example output (note: tabs aren't in here):
$ ./coreboot-builds/sharedutils/cbfstool/cbfstool test.serial.bin print
-r FW_MAIN_A -k
Performing operation on 'FW_MAIN_A' region...
Name Offset Type Metadata Size Data Size Total Size
cmos_layout.bin 0x0 cmos_layout 0x38 0x48c 0x4c4
dmic-2ch-48khz-16b.bin 0x500 raw 0x48 0xb68 0xbb0
dmic-2ch-48khz-32b.bin 0x10c0 raw 0x48 0xb68 0xbb0
nau88l25-2ch-48khz-24b.bin 0x1c80 raw 0x48 0x54 0x9c
ssm4567-render-2ch-48khz-24b.bin 0x1d40 raw 0x58 0x54 0xac
ssm4567-capture-4ch-48khz-32b.bin 0x1e00 raw 0x58 0x54 0xac
vbt.bin 0x1ec0 optionrom 0x38 0x1000 0x1038
spd.bin 0x2f00 spd 0x38 0x600 0x638
config 0x3540 raw 0x38 0x1ab7 0x1aef
revision 0x5040 raw 0x38 0x25e 0x296
font.bin 0x5300 raw 0x38 0x77f 0x7b7
vbgfx.bin 0x5ac0 raw 0x38 0x32f8 0x3330
locales 0x8e00 raw 0x28 0x2 0x2a
locale_en.bin 0x8e40 raw 0x38 0x29f6 0x2a2e
u-boot.dtb 0xb880 mrc_cache 0x38 0xff1 0x1029
(empty) 0xc8c0 null 0x64 0xadf4 0xae58
fallback/ramstage 0x17740 stage 0x38 0x15238 0x15270
(empty) 0x2c9c0 null 0x64 0xd2c4 0xd328
fallback/payload 0x39d00 payload 0x38 0x12245 0x1227d
cpu_microcode_blob.bin 0x4bf80 microcode 0x60 0x17000 0x17060
(empty) 0x63000 null 0x28 0x37cf98 0x37cfc0
Change-Id: I1c5f8c1b5f2f980033d6c954c9840299c6268431
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13475
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since NetBSD does not support uname -o, push check for CygWin
inside separate non-failing condition in Makefile.
Change-Id: Ibd264384f49b33412f0ef8554bd9c9fb8f60a892
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12831
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds three timestamps to coreboot and the cbmem utility that
track the time required to read in the Chrome OS Vital Product Data
(VPD) blocks (RO and RW). It's useful to account for these like all
other large flash accesses, since their size is variable.
BRANCH=None
BUG=None
TEST=Booted Oak, found my weird 100ms gap at the start of ramstage
properly accounted for.
Change-Id: I2024ed4f7d5e5ae81df9ab5293547cb5a10ff5e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b97288b5ac67ada56e2ee7b181b28341d54b7234
Original-Change-Id: Ie69c1a4ddb6bd3f1094b3880201d53f1b5373aef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322831
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
With the introduction of flashmap cbfs alignment of files gets
broken because flashmap is located at the beginning of the flash
and cbfstool didn't take care about that offset.
This commit fixes the alignment in cbfs.
Change-Id: Idebb86d4c691b49a351a402ef79c62d31622c773
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13417
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Id0316042f665ec9c095887cf6a37a7949ed8e861
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13421
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Not just *-linux-gnu.
Change-Id: Ib817c6d207d3b69ce7595505f2b45f3be35b7d2f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13420
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
What's the exact difference between TARCH, TSUPP and TBFDARCHS? Fear no
more, it's documented.
Change-Id: I18717eb1e20b1c0a82a485d391de2794a77c59ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13419
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Instead of people open coding the offset field access within a
struct buffer provide buffer_offset() so that the implementation
can change if needed without high touch in the code base.
Change-Id: I751c7145687a8529ab549d87e412b7f2d1fb90ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13468
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
It may still fail on non-Linux, and the compiler may do fancy things,
but it builds.
Change-Id: If3456f5fef8d01082a49978dc7cda5450f96f5cc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13416
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
gcc 4.4.7 fails to compile due to the missing initializers
for all struct members. Add initializers for all fields.
Change-Id: If1ad4fff0f965ccd7e821820c0703853c1e5c590
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13418
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add NetBSD-specific locations under pkg/ and missing linker flag
for libpciutils.
Change-Id: I812817a374aaba561b28d8a22f20d238c9dca32b
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GMP's configure tries to build for 64-bit with a 32-bit userspace on
NetBSD too. Help it by forcing ABI=32.
Change-Id: I290ea0ef1626fdd88dc3ff74fadb9578ef6a1c9c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13067
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Make the requirement of python2 explicit in scripts that are incompatible
with python3.
Change-Id: I77f150bdb3aab316fc3c3a21b911db397fa0106f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13286
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 89798bcb0c.
Disable building gnat again as it turned out that many distros don't
ship with a sufficient recent version of gnat. We'll have to find a
reliable way to check for the installed gnat version and query the
user or bootstrap gcc in that case.
Change-Id: Ife7cf7c9d1567aca898ce308b120a7b9e146e5f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13422
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
This way users are not constrained to have it installed as
/usr/bin/python.
Change-Id: I822b6c402004aad8f2353e71afbd8ee3f9d26d45
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13285
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There can be an error when a cbfs file is added aligned or as
xip-stage and hashing of this file is enabled. This commit
resolves this error. Though adding a file to a fixed position
while hashing is used can still lead to errors.
Change-Id: Icd98d970891410538909db2830666bf159553133
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13136
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mt8173 boot rom expects the bootblock to be in a certain format.
gen-bl-img wraps our bootblock appropriately.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I7486e548d356c5bd27261851f1f1bed620715e91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbcd7959e0fda595de91899ace7236037ac833d3
Original-Change-Id: Ib9df440bfa95cf06e8041491ecdb34c357047acd
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292664
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The script checks for a folder called documentation, while the folder
name is Documentation.
Without this change, I get this when running the script:
util/scripts/get_maintainer.pl: The current directory does not appear to be
a coreboot source tree.
Change-Id: Ied7ead7dfec33e9324f06d0ef60dcd6d7ba40104
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13062
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I thought we'd be using gnatmake but it's deprecated. Who needs it
anyway?
Change-Id: Ic08add72e771fa346c8a736ea901863ea5737d91
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add functionality to cbfstool to generate file attributes
for position and alignment constraints. This new feature
can be activated with the -g option and will generate,
once the option has been enabled, additional attributes
for the files where position, xip or alignment was specified.
Change-Id: I3db9bd2c20d26b168bc7f320362ed41be349ae3a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12967
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
cbfs_add calculated a base address out of the alignment specification
and stored it in param.baseaddress.
This worked when every cbfstool invocation only added a single file, but
with -r REGION1,REGION2,... multiple additions can happen.
In that case, the second (and later) additions would have both alignment
and baseaddress set, which isn't allowed, aborting the process.
Change-Id: I8c5a512dbe3c97e08c5bcd92b5541b58f65c63b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The CBFS flag in fmd files isn't stored in the fmap, so allow storing it
out of band using the -R option.
Change-Id: I342772878d7f8ce350de1a32dc7b2a5b07d6617d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Somehow I lost a $ on headerlist between when I tested the script
and when I submitted it, turning headerlist into plain text instead
of a variable name. This makes the test always pass.
- Fix variable bug.
- exclude this script from the check.
- update test for empty HEADER_DIRS variable.
Change-Id: I6080c520bc741e9d689f7c66ee97879afc8ba38c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13057
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On Apple OS X, the ntohl and htonl need including header,
#include <arpa/inet.h>
Please refer the manpage for these command on OS X,
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man3/htonl.3.html
Change-Id: Ia942c58f34637c18222fbf985b93c48abf63c5b8
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/11672
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool tries opening the input file for write access even if the
command does not require modifying the file.
Let's not request write access unless it is necessary, this way one
can examine write protected files without sudo.
BRANCH=none
BUG=none
TEST=running
cbfstool /build/<board>/firmware/image.bin print
in chroot does not require root access any more.
Change-Id: Ic4e4cc389b160da190e44a676808f5c4e6625567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ef6a8e25d9e257d7de4cc6b94e510234fe20a56d
Original-Change-Id: I871f32f0662221ffbdb13bf0482cb285ec184d07
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/317300
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12931
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Split the script up to make it easier to update and read.
- Check for multiple different license strings. Not all files are GPL
licensed.
- Don't validate 0 length files
- Update list of files to exclude from the license header check.
- Add command line option to set directories to check
- Add stable version to check a few directories that are fixed. This
just calls the non-stable version with the directories to check.
Change-Id: I90d4e93a20b4e1638ce4f43f8acbee72dc588625
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12909
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Check that selected symbols are type bool
- Check that selected symbols aren't created inside a choice
- Check that symbols created inside a choice aren't created
outside of a choice as well.
Change-Id: I08963d637f8bdfb2413cfe831eafdc974d7674ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12969
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I think these four methods should cover most operating systems,
with many supporting several of the methods.
If we don't find anything, we're not any worse off than we were before.
The big issue would be if we get an incorrect value.
Change-Id: I4a612d39e93173e9d6e0de892f5bebf716912b1a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12937
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Help prevent additional files coming in to the tree with the old
license header.
Change-Id: Idbafc2d8c05f87075083293d27900304c53e13dc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12920
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I tried to handle the checking for the config flag internal to xcompile,
but the config flags don't appear to have been loaded into the
environment by make at that point.
This does update the if to check if the flag is even set before putting
anything into .xcompile though. If the LDFLAG isn't set, there's no
point in appending anything.
Also removes the LP version of the erratum config flag, which was a
copy/paste mistake from $(CONFIG_LP_COMPILER_GCC).
Change-Id: I3d8b0328c85310393a120741a498bc18867a6f54
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of looking for an FMAP at every byte, only search down
to a granularity of 16 bytes, reducing the time for a cbfstool
call by 0.3s when no FMAP is found.
Signed-off-by: Stefan Reinauner <reinauer@chromium.org>
BUG=none
BRANCH=none
TEST=time ./cbfstool coreboot.rom add -f locale_de.bin -n locale_de.bin -t 0x50 -c lzma
is 0.3s faster than before.
Change-Id: Icb4937330e920ae09928ceda7c1af6a3c5130ac7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc92d838ba9db7733870ea6e8423fa4fa41bf8fe
Original-Change-Id: Idbaec58a199df93bdc10e883c56675b419ab5b8e
Original-Reviewed-on: https://chromium-review.googlesource.com/317321
Original-Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/12932
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In parse_elf_to_stage(), it uses 32-bit variable to handle address.
The correct address type is Elf64_Addr. Use uint64_t to prevent address
to be truncated.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I1abcd16899a69b18dd10e9678e767b0564b2846e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ebc1aae0ae4ca30802a80a4a4e2ae0c0dad4d88a
Original-Change-Id: I21f8057ddf13e442f1cf55da6702c3449ba0cc35
Original-Reviewed-on: https://chromium-review.googlesource.com/292553
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12927
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
hashcbfs was spliced in a line early, mixing up 'extract' and 'cbfshash'
help texts.
Change-Id: I86d4edb9eec0685a290b2dd4c2dc45d3611eba9a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12922
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The license text that we decided to remove was removed from the headers
of these files, but was still left in the help text. Remove it from
those locations as well.
Change-Id: I0e1b3b79f1afa35e632c4a4dd09a8bf2b02eaa6d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12913
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This continues what was done in commit a73b93157f
(tree: drop last paragraph of GPL copyright header)
Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12914
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove duplicate line which sets baseaddress parameter.
Change-Id: Idfbb0297e413344be892fa1ecc676a64d20352bf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12904
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The lint target in the makefile relies there being a script using
this particular naming format, so add a shell script front end to
run the kconfig linter.
Change-Id: I029c1cd3bbf3837c9f1d86c391ae5cabfa53685d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12903
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Checkpatch should be 007.
Change-Id: Ib71c50ad1a63a3a743391cd8fea9f79cd08ef6f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12901
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of printing out a single tool that needs to be installed
each time buildgcc is run, print out the entire list of tools
to be installed, then halt.
Change-Id: I7761760eef3c45ba371f882a4f987408945bb3e5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously, when we tested for g++ and two different versions of clang,
if the earlier versions were not found, buildgcc would still request
that they be installed. This obviously isn't needed, and isn't the
desired outcome.
Now, if one of the first tests fails, nothing gets printed. If all
the tests fail, it tells you to install either g++ or clang.
Change-Id: I71359f59c4c6bee3c3c55e4e6105f11e6ca51527
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12852
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Quoting variables prevents word splitting and glob expansion, and
prevents the script from breaking when input contains spaces, line
feeds, glob characters and such.
See shellcheck warning SC2086
Change-Id: Ib6ca46b64a621c4bea5c33ac312f2824b0386235
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12845
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using the local variables instead of positional parameters helps
readability.
- Add and use the local variables in testcc.
- Use the existing local variables in testld.
Change-Id: Ice13288b830a7aa043b360eaee8e36f060589a18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12844
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While the backtick syntax isn't actually deprecated, the $() syntax
is preferred. Since both styles were being used in this script, settle
on the new standard for all cases.
Change-Id: I33770d666781b4fa34c909411e0d220c2540dbb4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12843
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Clean up the output file a bit by only including the erratum
for arm64 into the that architecture section instead of
every architecture.
Change-Id: Ib6276f12aee5deb92a03e1c4fa2ad57db46bdc8f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12842
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to be able to check the compiler versions, we need to be
able to access the compiler variables. Move the original assignments
outside of the GCC check, and assign either the GCC or CLANG compiler
to the actual CC_ environment variable later. This ends up with the
same value set, while allowing the compiler versions to be checked.
Change-Id: Iffad02d526420ebbdfb15ed45eb51187caaa94fb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12841
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We already have a CFLAGS variable - Use it for all of the flags.
Change-Id: I22b4c5cf24b8743e85ffab29ddcccdc6c732ea3b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12840
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The XGCCPATH prefix is on all the other tools and compilers,
so add it to clang as well, so it can be found correctly.
Change-Id: Ibc250a81433f37bbb0555d32605aebe3a68aaf40
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12839
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add bar at the top of each architecture
- Make the architecture name and the TARCH_SEARCH to two lines
- Add a second line at the bottom of each architecture
- Add a comment about the two blank lines so they don't get
accidentally removed.
Change-Id: Ib4326bd94fe39b979244816ce54b752d083f6b16
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12838
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I96a5048050f8016c3c569f20318b4d421a4470a7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12837
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 68d0e4a5a1.
Special handling of MPFR is no longer needed with the latest
MPFR release.
Change-Id: I96d9ea92cfb74eed6af2ba62254f0678081e2b4f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12833
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The current MPFR version contains a stale config.guess file
that requires special handling on ppc64el systems. Bump
the MPFR version to the latest release.
Change-Id: I5e86c732c09f8a6a43f9812452124d64d337ea3f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12832
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested on C3/EPIA board and Linux x86
Change-Id: I8df551f4b385ee8702af78df00169bdc8e180925
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The cbfs master header's offset and romsize fields are absolute values
within the boot media proper. Therefore, when adding a master header
provide the offset of the CBFS region one is operating on as well as
the absolute end offset (romsize) to match expectations.
Built with and without CBFS_SIZE != ROM_SIZE on x86 and ARM device. Manually
inspected the master headers within the images to confirm proper caclulations.
Change-Id: Id0623fd713ee7a481ce3326f4770c81beda20f64
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12825
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
For the purposes of maintaining integrity of a CBFS allow one to
hash a CBFS over a given region. The hash consists of all file
metadata and non-empty file data. The resulting digest is saved
to the requested destination region.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Integrated with glados chrome os build. vboot verification
works using the same code to generate the hash in the tooling
as well as at runtime on the board in question.
Change-Id: Ib0d6bf668ffd6618f5f73e1217bdef404074dbfc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12790
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Adding new files overwrote the header with the empty file (ie 0xff),
so carve out some space.
BUG=chromium:445938
BRANCH=none
TEST=none
Change-Id: I91c292df381c2bac41c6cb9dda74dae99defd81d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12789
Tested-by: build bot (Jenkins)
These need to go together, so the commit became a bit larger than
typial.
- Add an option -R for the copy source fmap region.
Use: cbfstool copy -r target-region -R source-region.
- Don't generate a CBFS master header because for fmap regions, we
assume that the region starts with a file header.
Use cbfstool add-master-header to add it afterwards, if necessary.
- Don't copy files of type "cbfs master header" (which are what cbfstool
add-master-header creates)
- Leave room for the master header pointer
- Remove -D command line option as it's no longer used.
BUG=chromium:445938
BRANCH=none
TEST=Manual test on image and integration test w/ bundle_firmware
changes.
CQ-DEPEND=CL:313770,CL:313771
Change-Id: I2a11cda42caee96aa763f162b5f3bc11bb7992f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12788
Tested-by: build bot (Jenkins)
This allows adding support for FMAP based cbfstool copy more easily.
BUG=chromium:445938
Change-Id: I72e7bc4da7d27853e324400f76f86136e3d8726e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12787
Tested-by: build bot (Jenkins)
Let toolchain.inc error out when the architecture or tool is missing.
Change-Id: I39a51e5a2c778d6bbc50354807e5e2b717fa9e52
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The config.guess file included with MPFR is completely obsolete,
leading to build failures on ppc64el due to the system architecture
not being detected. Regenerate the files from the host system via
automake before attempting to build MPFR.
Change-Id: I00fc16003906e373d112c25978197ac907adccfd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The previous official GMP release (6.0.0) contains a bug that
prevents compilation on ppc64el systems. Increase version
to the latest version (6.1.0).
Bug details:
gcc build on ppc64el fails with:
(.text+0x4c): undefined reference to `BMOD_1_TO_MOD_1_THRESHOLD'
While I don't have an exact commit hash due to Hg use upstream,
a missing BMOD_1_TO_MOD_1_THRESHOLD define on ppc64el was quietly
fixed in Hg before the 6.1.0 release.
Change-Id: I1c05a1c194141db5f8522148c2e20e7558d34714
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12811
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When coreboot is pulled in as a submodule, the .git "folder" is a file,
not a folder. Use the '-e' test instead of '-d' to allow for that.
Change-Id: I0dd8866b0016f7ba099cdaf4d7db442ff22612b5
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12819
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using origin/master as the git revision breaks reproducibility, giving
different values depending on when the code was pulled from the
repo at coreboot.org. By using the current revision instead, we get
identical builds.
Change-Id: If4be6e048d6c8e417b8c074199745900ccd82b49
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12807
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
clang version now returns:
coreboot toolchain v1.33 November 25th, 2015 clang version 3.6.1
(tags/RELEASE_361/final) (based on LLVM 3.6.1)
Change-Id: I948d7f4d06c244987342cfc7d5c7e728cbed93bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12777
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Quoting variables prevents word splitting and glob expansion, and
prevents the script from breaking when input contains spaces, line
feeds, glob characters and such.
See shellcheck warning SC2086.
Change-Id: I7256d2fc2a22bce7723950a534fef6d57cbd097f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12761
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This allows users who build the rom from the board-status repo to
verify that their rom matches the original.
Change-Id: I4e8564e389495909219f92ccdafb8e9568f8f0d0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12760
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Print what the script is doing so when it asks for the ssh password
several times in a row, it's obvious that it's actually doing different
things, not that the password failed.
- Don't print the output from cbfstool - it's not useful.
Change-Id: I785283475e14f242117682800c26db6b4f9f1e2c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the payload_config and payload_version files are in coreboot.rom,
extract and save them.
Change-Id: I36b17ed189f94e2d4e873b0e219e5a9a2abe77a1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The old serial port read method lost characters from the boot log. This
method works better for me.
- Put get_serial_bootlog arguments into variable names for clarity.
- Fully configure the serial port with stty: disable parity and flow control.
- Change serial port read from reading with 'cat' to reading with 'read'.
- Update help to show current default speed from the variable.
tested under dash, bash, and zsh on several platfoms.
Change-Id: I91ae63a3c226e61019dbdf69c405c3f20ba7db54
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the coreboot toolchain version to iasl's version output.
% ./xgcc/bin/iasl -v
Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20150619-64
Copyright (c) 2000 - 2015 Intel Corporation
coreboot toolchain v1.33 November 25th, 2015
This won't actually be checked until the next version of
iasl so that we don't have to rebuild again for no reason.
The buildgcc version was intentionally not incremented for
this minor change.
Change-Id: I03a1a777fdb84e34bfceb7b1eb43fffbc1f3a2fc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12688
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The constant for ppc64 is 'hotstuff'. For many reasons.
Note that line 2894 of elf.h is not indented. This is because in the
original the line begins with a space. Checkpatch rejects that.
Checkpatch also rejects changing the space to a tab because that makes
it more than 80 chars. I rejected breaking the line because it makes it
even less readable. All the changes forced by checkpatch make the code
less readable.
Herman Hollerith would be proud.
Change-Id: I21f049fe8c655a30f17dff694b8f42789ad9efb7
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/12711
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
We still add a master header for compatibility purposes, and the default
layouts don't cover anything non-coreboot (eg. IFD regions) yet.
The default layouts can be overridden by specifying an fmd file, from
which the fmap is generated.
Future work:
- map IFD regions to fmap regions
- non-x86: build minimalistic trampolines that jump into the first cbfs
file, so the bootblock can be part of CBFS instead of reserving a
whole 64K for it.
- teach coreboot's cbfs code to work without the master header
- teach coreboot's cbfs code to work on different fmap regions
Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/11692
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The former interpretation sprung from the x86 way of doing things
(assuming top-alignment to 4GB). Extend the mechanism to work with CBFS
regions residing elsewhere.
It's compatible with x86 because the default region there resides at the
old location, so things fall in place. It also makes more complex
layouts and non-x86 layouts work with negative base addresses.
Change-Id: Ibcde973d85bad5d1195d657559f527695478f46c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12683
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
I didn't go back through the development guide for this.
But based on test, if the empty entry is filled as 0xFFFFFFFF,
instead of 0, the USB3 port can not be used.
Leave the entries of PSP and PSP2 as 0xFFFFFFFF to be compliant
with the case before the amdfwtool is used.
Change-Id: Icd5f9891e541279dbd551bbceaf091488d22bfef
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12665
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Until there's a reason to, don't print a warning about the missing
power8 compiler.
Change-Id: I47c60e0a16892f0fa228e1439e0424926bca00a4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12634
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The help text had gotten kind of sloppy. There was a missing newline
in the add-stage command, some of the lines were too long, etc.
Change-Id: If7bdc519ae062fb4ac6fc67e6b55af1e80eabe33
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
- Including the help targets in the list of NOCOMPILE targets means they
can run even if the toolchain is mucked up. Since they contain info on
building the toolchin, this is useful.
- Separate the three current parts of the help target into individual
components: help_coreboot, help_toolchain, and help_kconfig. This is
mostly for the help_toolchin target which will be printed out by
toolchain.inc.
Change-Id: I365d95fd63e22bddd122fb1fede6f04270e03d63
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12542
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Julius Werner