I23C_PAD_CTRL_SLEW_N_SHIFT is 6 and not 7 which matches both with the
PPR #57243 revision 1.53 and with I23C_PAD_CTRL_SLEW_N_MASK which covers
both bits 6 and 7.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I622717bebaffe34b6df5e578b082dc10e2a98256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63216
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Turn off the NFC power which is controlled by GPP_D3 to save power in
S0ix states. For an USB device, the S0ix hook is needed for the on/off
operations to take place.
BUG=b:202737385
BRANCH=firmware-brya-14505.B
TEST=measure the voltage of GPP_D3 in S0ix states
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I69588c82dfde1744c45c7aff3ac05b80bb16a8f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
On x86 ramstage is always relocated at runtime in cbmem so there is no
need to have this configurable in Kconfig.
Change-Id: I01b2335d0b82bea8f885ee5ca9814351bbf2aa3c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63215
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times
are greater than 500ms, which is the spec for Chromebooks.
The actual kernel timing has been measured, and given the ACPI delay
after deasserting reset in addition to the delay until the kernel
driver accesses the device, delaying only 200ms in the ACPI method is
also sufficient to meet the 300ms requirement.
BUG=b:223936777
BRANCH=none
TEST=build and test touchscreen function on DUT.
TEST=suspend, wake DUT and check touchscreen function.
Change-Id: I6b04cf6392d924aed01ca36b720f889b88d92311
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
C0 has no redriver, so enable SBU muxing in the SoC.
C1 has a redriver which does SBU muxing, so disable SBU muxing in the
SoC. However, this also disables AUX biasing when the pins are
configured as NF6. So instead configure the C1 AUX bias pins as GPO.
BUG=b:227259673
TEST=Voltages are correct on the C0 and C1 AUX bias pins
Change-Id: Ic0af662ecc1c6cee15b4ae98cb02deeefc93a71e
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Add new board Clevo L14xMU (TGL).
GPIOs were configured based on schematics.
Tested and working:
- On-board RAM (M471A1G44AB0-CWE)
- DIMM slot (tested Crucial CT16G4SFD8266.16FJ1 / MTA16ATF2G64HZ-2G6J1)
- Graphics (GOP driver), including HDMI
- Keyboard
- I2C touchpad (including interrupt)
- TPM (with interrupt on Windows, only polling on Linux [1])
- microSD Card reader
- both NVME ports
- Speakers
- Microphone
- Camera
- WLAN/BT (CNVi)
- All USB2/3 ports including Type-C
- Thunderbolt detects my work laptop in TB Control Center
(I couldn't test anything more due to security policy.)
- TianoCore
- internal flashing with flashrom on vendor firmware
Note on TPM:
The vendor sets Intel PTT to default-on in newer CSME images, which
conflicts with the dTPM. Currently, there are two ways to make it work:
1) Boot vendor firmware once to let it disable PTT via CSME firmware
feature override.
2) Use Intel Flash Image Tool (FIT) to set "initial power-up state" to
disabled.
Boots fine:
- Debian testing, unstable (Linux 5.16.14, 5.17.0-rc6)
- Windows 10 21H2 (Build 19044.1586)
Untested:
- Thunderbolt (see above)
- Type-C DisplayPort
- S-ATA
Doesn't work:
- TPM interrupt on Linux [1]
- All EC related functions - EC driver is WIP
- WLAN/BT (PCIe) - gets detected but can't be enabled
- 3G/LTE (not powered without EC driver)
- Fn-Keys
- S0ix
- UCSI
- Fan control
- Battery info
[1] https://lkml.org/lkml/2021/5/1/103
Change-Id: I4c4bef3827da10241e9b01e12ecc4276e131a620
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
When rebuilding coreboot the empty fit table added to added to CBFS
stays the same so the build process sees no reason to update the file.
In the meantime ifittool did update that file for instance to add
microcode update entries. So each time coreboot is rebuilt the entries
are appended to the FIT table which runs out of space at some point.
One way to deal with this is to clear the fit table when setting the
pointer inside the bootblock.
TESTED: Now running 'make' again on prodrive/hermes does not report an
error with a filled FIT table.
Change-Id: Ia20a489dc90a4ae704e9ee6d532766899f83ffcc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63036
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When setting the FIT pointer, the FIT table is only known later in the
codeflow.
Change-Id: I658f4fffa997d1f7beaf6d6ae37d2885ae602e5c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63035
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
EE requested that we increase the drive strength for the SPI lines to
8mA.
BUG=b:198627043
BRANCH=None
TEST=EE help verify
Change-Id: Ic887a7eef74f1063f7284db042c5fbd2e1d5bd4c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Flame graphs are used to visualize hierarchical data, like call stacks.
Timestamps collected by coreboot can be processed to resemble
profiler-like output, and thus can be feed to flame graph generation
tools.
Generating flame graph using https://github.com/brendangregg/FlameGraph:
cbmem -S > trace.txt
FlameGraph/flamegraph.pl --flamechart trace.txt > output.svg
TEST=Run on coreboot-enabled device and extract timestamps using
-t/-T/-S options
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I3a4e20a267e9e0fbc6b3a4d6a2409b32ce8fca33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Some of these targets seem to come from a long time ago. Now just
rm -rf $(obj) is all that is needed for a clean.
Change-Id: Iccc62b3c54ee2a074c25674715403c1457f6aad3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Based on the latest schematic, agah will replace the Maxim 98390
speaker amps with Maxim max98360. This patch updates the
devicetree entries to reflect that.
BUG=b:210970640
BRANCH=brya
TEST=emerge-draco coreboot
Change-Id: I7ea36d276f7ffeae1510483027092e2bc59690fc
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Brask set GPP_D0 to GPO in commit b0769db4, but Kinox doesn't support
fingerprint. This patch sets GPP_D0 to NC for matching schematic.
BUG=b:214025396
BRANCH=firmware-brya-14505.B
TEST=emerge-brask coreboot
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I38b9eb2df83cfbdb58d95cb178c1d767299aa4da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The do_send_end_of_post function is implemented in the cse_eop.c file.
This change adds the Kconfig SOC_INTEL_CSE_SET_EOP in cse.c to avoid
build issue.
Change-Id: Ib52404d9ad4c01a460e4cfef331c529d2a53337a
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
The headers are now unused, drop them.
Change-Id: Ibfaa3029ddc614935481ce736c9d971bf4831b5d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On platforms using UDK2015 select UDK2017 instead.
This allows to drop UDK2015 headers.
Tested using timeless builds: The produced binaries are identical.
Change-Id: Ia6032c6520ec889cd63655db982d9bfa476dc24d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Replace LShiftU64 and RShiftU64 as the defined macro conflicts with
UDK2017 headers.
Tested using timeless builds: The produced binaries are identical.
Change-Id: I8f205f663be9c9c31cf384ca89370afa48ca1e15
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Fix return type of early_init_get_elapsed_time_us() to comply with the
data type of return value.
Also replace memset() with struct initializer.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Fixes: commit 41faa22 (soc/mediatek: Add early_init for passing data
across stages)
Change-Id: I7c361828362c2dfec91358ad8a420f5360243da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
RF team comfirmed that SAR sensor is not necessary for MP,
therefore remove the corresponding entries from the devicetree.
BUG=b:202978964
TEST=Build pass.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I31faf18563848f8d6787fe70bfb28006efea8427
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fill in the memory config based on the the schematic by bernadino 14 adl-p 20220112.pdf
BUG=b:219891328
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I981d2cd6feafee8c10ec9724a3dec9a23ba0ddd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The patch logs CSE RO's write protection information for Alder Lake
platform. As part of write protection information, coreboot logs status
on CSE RO write protection and range. Also, logs error message if EOM
is disabled, and write protection for CSE RO is not enabled.
TEST=Verify the write protection details on Gimble.
Excerpt from Gimble coreboot log:
[DEBUG] ME: WP for RO is enabled : YES
[DEBUG] ME: RO write protection scope - Start=0x1000, End=0x15AFFF
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I766d5358bb7dd495b4a9b22a2f1b41dc90f3d8d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Now that the amdfwtool support for Sabrina is in place, change the
SoC name parameter passed to amdfwtool from Cezanne to Sabrina.
The fw.cfg file still points to the Cezanne binaries, but since
commit 9cb0a05dfb (soc/amd/sabrina: Add
prompt for AMDFW_CONFIG_FILE) this can be overridden via the Kconfig
config file in the build. As soon as the Sabrina PSP binaries are
available in 3rparty/amd_blobs, the fw.cfg file will be updated to use
the correct ones for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53a8de222e39bd2b92c07661b6c52a02fb651609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63189
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PSP_S0I3_RESUME_VERSTAGE Kconfig symbol is only defined in the
Cezanne Kconfig, so drop this from the Sabrina makefile.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9571a302d427981cdf750a1cb3b7f4db9d61a87c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63188
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PSP in the Sabrina SoC uses the image slot header to find the second
level PSP directory table, so it needs the ISH to be generated.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9e6308854147c9f6f72d722215c833ee86ee4f94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63186
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add PLATFORM_SABRINA to the enum of supported platforms and integrate it
into the existing code.
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe52b44395619f697686bd900a522562abbe7646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In newer AMD SoCs, the image slot header is used in the AMD A/B recovery
scheme, so set recovery_ab to true when need_ish is true. Also move the
block of code before the process_config call, since that call will
already use the recovery_ab field of the cb_config struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I65903765514f215bf5cc9b949d0b95aff781eb34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63184
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are using the second SPI pads for eSPI.
BUG=b:226635441
TEST=Build skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I43713d7376a28ced2be635668836464ceec46392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63096
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The way to select the pads has changed from Cezanne.
BUG=b:226635441
TEST=Build skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I96baf6b9c169ed61d221352b29ac676bca40da21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63095
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the image slot header (ISH) is used, the addresses in the PSP and
BIOS directory tables need to be relative to the beginning of the table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia61f7c8313d5a1af95c68b9177a53a2f5443552a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
For platforms without EC_GOOGLE_CHROMEEC S3 resume path
always reported ACTIVE_ECFW_RO because acpi_fill_cnvs()
and mainboard_chromeos_acpi_generate() were not called.
Change-Id: Iea71a51aba7ab1b6966389c17a1e06ccc96ae0e9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add the specific SPD hex file for the Samsung memory part with
updating the part number into the SPD table. The ABL needs to
identify the part by checking SPD data to do the proper tuning.
BUG=b:224884904
TEST=Build, validate the SPD data has been applied.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ia54726ce8c1bae46dcd4fed3df509ef184914e94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Some solutions require readable form of timestamps, which does not
contain spaces. Current descriptive timestamp names do not meet this
criteria. Also, mapping enums to their text representation allows for
quick grepping (use of grep command) to find relevant timestamps in the
code.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ifd49f20d6b00a5bbd21804cea3a50b8cef074cd1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Move STRINGIFY() from coreboot string.h to commonlib/bsd/helpers.h
Remove redundant defines from libpayload.h and libpayloads' standard
headers.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I3263b2aa7657759207bf6ffda750d839e741f99c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
On FreeBSD, every build target would show warnings from its
builtin printf().
Change the regexp to be compatible with BSD sed.
This will avoid noise like "printf: 4.14-1278-g5d74ccf1c3: not
completely converted".
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Change-Id: I1c0c260fd8d42e23a612a353a288e472cc068c8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Update the GPP_D12 according to USB_C3_LSX_RX.
BUG=b:225081954
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
The device can be recognized when it is attached in port3.
localhost /sys/bus/thunderbolt/devices # ls
0-0 1-0 1-0:3.1 1-3 domain0 domain1
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I38caa76c855e683eb0587eb67ee9abc91af4545d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
We don't want to enable the speaker on init. It will be enabled while
using GPIO AMP codec in depthcharge.
BUG=b:223289882
TEST=boot guybrush and verify the devbeep and gpio value in kernel
Change-Id: Ic949cc95556913a2afef4a683a49eaa1e07e6147
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Move the verb table to variant directory to allow for different tables
for different variants.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4260188057d1c3b4e6ea7c82f085fad0cc244881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Support was created for the NPCE9m5x series, using version 1.1
of the datasheet. The specific model tested was the NPCE985P/G,
on the StarLite Mk IV with version 1.00 of the EC firmware.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib66baf1e88f5d548ce955dffa00c9b88255b2f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Rather than using `ite_`, use `ec_` so the same functions
can be called for different ECs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie61af233f731eb47772af1c82c6abdc515bc89cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Felix Held