Current design reset pin is connected to PLTRST.
GPP_E7 is stop pin for touch. Reserve reset pin for
next stage implement.
BUG=b:143733039
BRANCH=N/A
TEST=check touch screen can work properly
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3ebd56ab49b87da425583da04f082e69293a023e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Set GPP_E16 reset to DEEP.
BUG=b:143057255
BRANCH=N/A
TEST=Measure GPP_E16 from S0 to S5 has no glitch
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I63932c6f5c8b7e6e9ab8aa55e69c629d29e7d1fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36511
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Multiple git checkouts cause GRUB2 to constantly rebuild even if there
were no changes to code or config. This is due to changing timestamps.
Fix this by not creating or switching branches but instead rely on
`git checkout -f` which does not touch existing unchanged files.
To be sure to not break anyones workflow checkout is skipped and a
warning gets printed if the tree/index is unclean.
Change-Id: I7cf66f63268de973a654146a0a47c3d5ca516d4d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36343
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a name to the SMBIOS enclosure type enum and use it as the return
type for smbios_mainboard_enclosure_type.
BUG=b:143701965
TEST=compiles
Change-Id: I816e17f0de2b0c119ddab638e57b0652f53f5b61
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36516
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Only use the custom hash routine when we need little endian.
Rename the function as well as it is little endian only now.
BUG=N/A
TEST=tested on fbg1701 board.
Change-Id: I037fa38c5961dab7a81e752c1685da2dc6b33d12
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Allow the user to enable and disable the logo from
make menuconfig. The file can be selected as well.
BUG=N/A
TEST=build
Change-Id: I630a9d14308131c180adaaa9e1fa5e6e11c3c61c
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The vendorcode/eltan and vendorcode/eltan/security directories
were both adding the mboot and verified_boot Kconfigs.
BUG=N/A
TEST=build
Change-Id: I6b5f19b4660d60345391b7320ce42466fd2cc769
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36479
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch makes use of "all-y" in order to replace all common stage (bootblock, verstage,
romstage, postcar, ramstage) files inclusion in Makefile.inc
Change-Id: I11001d0d381ec9c1df41bc331da845f51e666a44
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36546
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures to not set SMRR if TSEG base is not align with TSEG size
Change-Id: I77d1cb2fd287f45859cde37a564ea7c147d5633f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36542
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Icelake default selects PLATFORM_USES_FSP2_1 which means stack will be shared
between FSP and coreboot (CONFIG_FSP_USES_CB_STACK) hence no need to have any
other default value than 129KiB (128KiB for FSP and 1KiB for coreboot)
Change-Id: I856f7e48a4a1e86eb082b9e772e0776664edca51
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36538
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch replaces BIOS OpRpm execution checks from CONFIG_INTEL_GMA_ADD_VBT
to CONFIG_RUN_FSP_GOP as adding VBT files doesn't mean GFX PEIM is going
to execute to initialize IGD.
Change-Id: Ic76529ba11f621f644d4472be6cbbc34682f00bf
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch makes below clean up for report_cpu_info() function
1. Replace cpu_string with cpu_not_found
2. Assign default string "Platform info not available" to cpu_not_found string
3. Add array out of bound check while skiping leading white space in cpu brand
string name
Change-Id: I41c76eb93f0c5229c4a49aa041339b8ad51ad34a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36531
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are likely not properly set up and L1 is not even supported on
the desktop variant of the southbridge.
This fixes observed instability on some PCIe GPUs.
Change-Id: I70d3536984342614a6ef04a45bc6591e358e3abe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36576
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This solution is very generic and can in principle be implemented on
all arch/soc. Currently the old infrastructure to pass on information
from romstage to ramstage is left in place and will be removed in a
follow-up commit.
Nvidia Tegra will be handled in a separate patch because it has a
custom ramstage entry.
Instead trying to figure out which files can be removed from stages
and which cbmem_top implementations need with preprocessor, rename all
cbmem_top implementation to cbmem_top_romstage.
Mechanisms set in place to pass on information from rom- to ram-stage
will be replaced in a followup commit.
Change-Id: I86cdc5c2fac76797732a3a3398f50c4d1ff6647a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This solution is very generic and can in principle be implemented on
all arch/soc.
Instead trying to figure out which files can be removed from stages
and which cbmem_top implementations need with preprocessor, rename all
cbmem_top implementation to cbmem_top_romstage.
Mechanisms set in place to pass on information from rom- to ram-stage
will be placed in a followup commit.
Change-Id: If31f0f1de17ffc92c9397f32b26db25aff4b7cab
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Currently all stages that need cbmem need an implementation of a
cbmem_top function. On FSP and AGESA platforms this proves to be
painful and a pointer to the top of lower memory if often passed via
lower memory (e.g. EBDA) or via a PCI scratchpad register.
The problem with writing to lower memory is that also need to be
written on S3 as one cannot assume it to be still there. Writing
things on S3 is always a fragile thing to do.
A very generic solution is to pass cbmem_top via the program argument.
It should be possible to implement this solution on every
architecture.
Instead trying to figure out which files can be removed from stages
and which cbmem_top implementations need with preprocessor, rename all
cbmem_top implementation to cbmem_top_romstage.
TESTED on qemu-x86.
Change-Id: I6d5a366d6f1bc76f26d459628237e6b2c8ae03ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
When diffing boot logs, lines reporting times spent in each
boot_state always get highlighed due the little fluctuation
in microsecond-scale. Reduce the logged precision to
milliseconds to avoid that.
Change-Id: I7a27d6c250d8432131f30e9a4869cb45ad75d9fd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The x86 timers are a bit of a mess. Cases where different stages use
different counters and timestamps use different counters from udelays.
The original intention was to only flip TSC_CONSTANT_RATE Kconfig
to NOT_CONSTANT_TSC_RATE. The name would be incorrect though, those
counters do run with a constant rate but we just lack tsc_freq_mhz()
implementation for three platforms.
Note that for boards with UNKNOWN_TSC_RATE=y, each stage will have a
slow run of calibrate_tsc_with_pit(). This is easy enough to fix with
followup implementation of tsc_freq_mhz() for the platforms.
Implementations with LAPIC_MONOTONIC_TIMER typically will not have
tsc_freq_mhz() implemented and default to UNKNOWN_TSC_RATE. However,
as they don't use TSC for udelay() the slow calibrate_tsc_with_pit()
is avoided.
Because x86/tsc_delay.tsc was using two different guards and nb/via/vx900
claimed UDELAY_TSC, but pulled UDELAY_IO implementation, we also switch
that romstage to use UDELAY_TSC.
Change-Id: I1690cb80295d6b006b75ed69edea28899b674b68
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some platforms lack a non-eviction mode and therefore caching the
whole ROM to speed up XIP stages can be dangerous as it could result
in eviction if too much of the ROM is being accessed. The solution is
to only cache a region, about the size of the stage that the bootblock
is about to load: verstage and/or romstage.
TODO: now a limit of 256KiB is set for the total amount of cache that
can be used. This should fit most use cases for the time being.
Change-Id: I94d5771a57ffd74d53db3e35fe169d77d7fbb8cd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I5731003c8a094c4d108efbea14d31d335758bbb7
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36350
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is a user-visible option and enabled by default for ARCH_X86,
some consider it as debugging aid only. Therefore platform design
should not depend on it.
It must remain selected with CHROMEOS and boards are allowed
to explicitly select it as well.
For siemens/mc_bdx1,mc_aplX boot time will be increased due
the use of get_us_since_boot() with COLLECT_TIMESTAMPS=n.
When unable to determine if N seconds has elapsed from boot,
this turns into a delay of N seconds.
Change-Id: I6ee4195d266440143344781d39db9578cd8bdcb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
EBDA is not PCH related, thus move the Kconfig to the appropriate socs.
Change-Id: I216871ad1a8dd5bc294062a4e9b54eb51f71b781
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use the new common function to set LT_LOCK_MEMORY at end of POST to
protect SMM in accordance to Intel BWG.
Tested successfully on X11SSH-M by disabling SGX and running chipsec.
Change-Id: I623e20a34667e4df313aeab49bb57907ec75f8a8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Remove the now orphaned memory locking API that was replaced by a
Kconfig-based approach.
Change-Id: Iebc45f514c576d77f90f558151d25c21f0554779
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use the new common function to set LT_LOCK_MEMORY prior to SGX
activation based on Kconfig.
Change-Id: Iefec0e61c7482a70af60dabc0bec3bf712d8b48a
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We only need this defined with udelay() implementation
on top of LAPIC_MONOTONIC_TIMER.
Change-Id: I490245fa0d57de3a6e8609e735f668626cf1201e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36526
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is expected that cbmem is initialized in romstage. The qemu-riscv
target did not perform that correctly. Fix this omission.
Change-Id: I00f8e3b315e57a5c042889f48450f79d263f24b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36446
Reviewed-by: Philipp Hug <philipp@hug.cx>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The public key was not verified during the verified boot operation.
This is now added. The items in the manifest are now fixed at 12 as
we always have the postcar stage.
BUG=N/A
TEST=tested on facebook fbg1701
Change-Id: I85fd391294db0ea796001720c2509f797be5aedf
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36504
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This has nothing to do with console options.
This also improves the help text to reflect what it actually does.
Change-Id: I039f4f6bbe144769d6a362192b225838ed3d9d43
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Also, the loglevel is never set to value of > 8.
Change-Id: Ief29e07be6ac075956bf0f9aee85b14eb89af44c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
The Kconfig contained some items that were only intended to
set a default and that now were displayed in two locations
in the menuconfig.
BUG=N/A
TEST=build
Change-Id: If5d9c993c03a0e901fd6c2a2107a6be6b94d063b
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36481
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add second source touch pad with i2c address 0x15.
BUG=b:142629138
BRANCH=N/A
TEST=check new touch pad can work properly
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icc58dbcf307f11c368a1a5408f32111ed5841d39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
use coreboot MP init for saddlebrook by default.
BUG=None
TEST=Boot till yocto linux 2.7 on saddlebrook and verified the AP's
proper initialization using 'cat /proc/cpuinfo' command.
Change-Id: I2db2fe92c8ba0e649dccf95ce804a97ae4a05603
Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
The document isn't included in any toc-tree due to a typo.
Change-Id: Ic1491dde2d48b5d004fc28c743bbee6de12f433c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36540
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These changes are in accordance with the documentation:
[1] page 106, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I5232a7a670b97d51ff3b3b71a08f25f961ac1d6f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36058
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Eric Lai