The data fabric also controls which PCI bus numbers get decoded to the
PCI root. In order for the resource allocator to know how the hardware
is configured, read the corresponding data fabric registers to get the
information that then gets passed to the allocator.
Picasso, Cezanne, Mendocino and Rembrandt only support one PCI segment
with 256 buses while the Phoenix and Glinda data fabric hardware has
support for more PCI segments. Due to this change, the register layout
is different and incompatible between those two, so introduce the
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT Kconfig option for a
SoC to specify which implementation is needed. At the moment, coreboot
doesn't have support for multiple PCI segments and the code doesn't
support PCI segments other than segment 0.
On Picasso the PCI bus number limit read back from the data fabric
register is 255 even though CONFIG_ECAM_MMCONF_BUS_NUMBER is set to 64,
so also make sure that the bus and limit returned by
data_fabric_get_pci_bus_numbers is within the expected limits.
TEST=PCI bus allocation still works on Mandolin (Picasso) and Birman
(Phoenix). Picasso has 64 PCI buses. coreboot puts this info into the
resource producer in _SB\PCI0\_CRS which the Linux kernel reads:
* coreboot: PCI0 _CRS: adding busses [0-3f]
* Linux: pci_bus 0000:00: root bus resource [bus 00-3f]
This matches the information in the ACPI MCFG table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide5fa9b3e95cfd59232048910cc8feacb6dbdb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77080
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SOC_AMD_REMBRANDT_BASE comment at the end of Glinda's Kconfig is
probably a leftover from the Mendocino/Rembrandt SoC this file was
copied from. Change it to SOC_AMD_GLINDA to match the corresponding
'if SOC_AMD_GLINDA' in the file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85132e4840c1bc713cfc2f3493f800d66edd10ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Neither Windows nor mainline Linux make use of IOSF on the Braswell
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/edgar
Change-Id: Ic51624ffd816d48c007c13d510601cf8cbf1edc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Neither Windows nor mainline Linux make use of IOSF on the Baytrail
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/swanky
Change-Id: I249028c57cc704955cf5a11e2088780ef58e16cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77141
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the maximum subordinate bus number of the domain to the last PCI bus
number that is decoded to this PCI root. This makes sure that the
resource allocator knows the maximum number of PCI buses on this PCI
root to not assign bus numbers to buses below this PCI root that aren't
routed to that PCI root.
Now that we have this info in the link list structure or the domain
device, we can pass the max_subordinate field to the
acpigen_resource_producer_bus_number call and can leave the subordinate
number after pci_domain_scan_bus is done unchanged instead of setting it
to the limit.
TEST=On Mandolin both the bus resource producer in _SB\PCI0\_CRS and the
PCI bus number allocation remain unchanged.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2ee75b2a7054a306b0c7d98c5357391c029187bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77112
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the ability to show a pre-boot splash screen on
Meteor Lake systems using FSP-S.
The patch calls into `fsp_convert_bmp_to_gop_blt()` when the
`BMP_LOGO` config is enabled. This function converts a BMP
file to a BLT buffer, which is then used by FSP-S to render the splash
screen.
Additionally, increase the heap size (malloc'able size) upto 512KB
(when BMP_LOGO config is enabled) to accommodate high
resolution logo file.
BUG=b:284799726
TEST=Able to see pre-boot splash screen while booting google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3608bfacc21574e12cde0e2012a16e6388ce54df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Intel requires that all enabled PCIe PCH ports have a CLK_REQ signal
connected. The CLK_REQ is used to wake the silicon when link entered
L1 link-state. L1 link-state is also entered on PCI-PM D3, even with
ASPM L1 disabled. When no CLK_REQ signal is used, for example when
it's using a free running clock the silicon will never wake from L1
link state. This will trigger a MCE.
Starting with FSP MR4 the UPD 'PchPcieClockGating' allows to work
around this issue by disabling ClockGating. Disabling ClockGating
should be avoided as the silicon draws more power when it is idle.
TEST: Verified on two boards, one with missing CLK_REQ on a PCH
root port, that the code does the right decision to disable
UPD PchPcieClockGating and PchPciePowerGating when necessary.
Change-Id: I673bbdbadc9afbed6a7bd5ce9f35dc70716d875b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Rembrandt has different data fabric component IDs compared to Mendocino.
PPR #56558 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c840a3e071a289d9e02143ee790c26faeda029d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
With reference to the Picasso PPR 55570 Rev 3.18, LegacyIoEn bit is 0 on
reset and setting it will enable the decoding of the following legacy IO
ports:
0x20, 0x21, 0xA0, 0xA1 (PIC);
0x40, 0x41, 0x42, 0x43, 0x61 (8254 timer);
0x70, 0x71, 0x72, 0x73 (RTC);
0x92.
Verstage does not use those legacy IO ports. Also newer SoCs like
Phoenix do not support Legacy I/O registers to access Power Management
registers and accessing them from PSP verstage causes a hang. Hence
enable legacy IO only on platforms that support it.
BUG=b::284984667
TEST=Build Myst BIOS image with PSP Verstage. Boot to OS successfully
with PSP verstage.
Change-Id: I5e74b4cd1fa7e942770976e5e2197ded47503660
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76692
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add configs for USB 3.1 Gen2 electrical validation (EV) settings
so that people can set the EV settings per board in device tree.
BUG=b:285811345
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to taranza and checked the log.
All usb configs were set correctly.
Change-Id: Iecd12d3db76b63ad99887dee5991d94d47f138fd
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76246
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie54fd6c5a82f368018d0b5fb811a6c9220c2c70b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77079
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0fe478a710ecc1f2c8b36347aaf2d1634ebba9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77078
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PPRs #57243 Rev 3.02 and #56558 Rev 3.04 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibabe8faa79e3dcd02f4c885d29b9634645947b98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77077
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfac7d996c6de9ea7c6adf2760de0ad97ffb9ec0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
PPR #55570 Rev 3.18 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide492f4479b85cd885044bbf74d8bf18c12e552b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
device/device.h provides struct device.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie03f6d15d94f2858e293b9f57505034263c03bbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77074
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Prior to commit d1c0f958d1 ("acpi: Call acpi_fill_ssdt() only for
enabled devices"), uart_inject_ssdt() was used to set the ACPI status
(_STA) for both enabled and disabled devices. The aforementioned commit
limited it to being called only on enabled devices, which left disabled
devices without any _STA method at all -- which the OS assumes means
that the device is present and enabled.
To fix this, create the _STA method in the UART asl code for each port,
and set the return value to a name variable (STAT) which defaults to
0 (not present/disabled). Then, have uart_inject_ssdt() set STAT to
present and enabled (0xF) for UARTs actually present on the board.
TEST=build/boot google/skyrim (frostflow), dump ACPI tables, and verify
that _STA returns 0xF only for UARTs enabled in devicetree.
Change-Id: Id89e74c3ea7f53280935898ee35311b7cf3b152a
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the UARTs as MMIO devices in the chipset devicetrees. Drop ACPI
_STA in asl since now handled by common SSDT generator. Implement
wait_for_aoac_enabled() since required by SoC common code, and ensure
compiled during all stages necessary.
TEST=build/boot google/liara, verify console UART still functional.
Change-Id: Ibecafdfa189d9c63a29b63759c5b965d03719009
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 5dfec71829.
Reason for revert: This change made it impossible to disable ASPM by
FSP parameter. ASPM_DISABLE would result in the FSP parameter not
being programmed, causing it to be the FSP default value instead.
This additionally fixes MTL to match ADL.
Change-Id: I60c0ea08513fcb0035449ea3fef1681de528c545
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75280
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To deduplicate mainboard mainboard_config_iio since there are a few
SPR-SP mainboards now.
The flow would be soc function initialize_iio_upd initializes the table
with the default values which are mostly zero, then mainboard can
overwrite it by soc_config_iio.
Change-Id: I72d74241fcad4c85a95f6d14587418f544caadd9
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76185
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
TEST=APU2 still boots and doesn't show any new errors in dmesg.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia9f0eb3df8fd2dfe395f616da981cc3a0cd3b29d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Before add_io_regions only reported one fixed IO range to the resource
allocator that covered the whole IO range from 0x0000 to 0xffff. Instead
read the data fabric IO space decode base and limit address register
pairs to get the actual IO port decoding from the data fabric registers.
This will also help with adding support for multiple PCI root domains to
the common data fabric domain code so that Genoa can use it. In that
case each PCI root domain will only decode a part of the whole IO port
range.
Beware that the data fabric IO base and limit fields can contain values
that correspond to IO port addresses far outside of the addressable IO
port range. In case of Picasso, the IO limit read from the only enabled
DF IO range register would be 0x1ffffff after converting the raw data to
an IO port address. To not give the resource allocator wrong constraints
make sure that the IO limit we report will be at maximum 0xffff.
TEST=On Mandolin (Picasso) and Birman (Phoenix) the full range of IO
port addresses still gets reported as a domain IO resource producer like
before the patch:
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I087d96f7bdaae0d7b53089f6abaf0500a4b064e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia58e26caa1ba910b41911991b176a1ac8c4e0065
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I769dc317115981391cf0f4e0b743c600407a6eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76958
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PPRs #57243 Rev 3.02 and #56558 Rev 3.04 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic68e73e28362abc5d812839b40282114c7ba25ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPR #56569 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifcae9c9ad664d50100cd40692fd9631845f76671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
PPR #55570 Rev 3.18 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I61d4fca48d71010bbc4bd94a2fb8889bad08f1cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Rename add_io_regions to add_data_fabric_io_regions to be consistent
with add_data_fabric_mmio_regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia990cc14dd6dc162ad614a6e9e0b36426cb04670
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
As a preparation to read the IO decode ranges from the data fabric
registers instead of having it hard-coded, factor out the
report_data_fabric_io function to report one IO producer region from
add_io_regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c3f8cd6749623f1a4bad14873d53b8a52be737
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76933
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename the fabric_id struct field in the df_mmio_control union to
dst_fabric_id to both better match the register definitions and also be
a bit clearer about what this is doing. Also use tabs for indentation in
the struct inside the df_mmio_control union.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0a17d82a5d7b66a8f84854f21fbbb319da81ac43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Order the data fabric register definitions by function number and
register offset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia3066ad0f564520cb322a3e41a413eb3bf51260d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a26402b8078d288a7e32c1668591d001fa3ede9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76889
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the data fabric PCI device functions are included in the
register definitions, the remaining data fabric device function numbers
can be dropped from the define names.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia0355838ac1d513ba562fd6fb4672342dd383498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76888
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Instead of open coding the broadcast data fabric PCI register access in
the functions for indirect non-broadcast data fabric register access,
just use the existing data_fabric_broadcast_[read,write]32 functions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I174c1e6ee4856d97c5ec6d07bb8c217d6df9425f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
To have both the PCI function number and the register offset into the
config space of that function of the data fabric device in the data
fabric register definitions, introduce and use the DF_REG_ID, DF_REG_FN
and DF_REG_REG macros. The DF_REG_ID macro is used for register
definitions where both the function number and the register offset are
specified, and the DF_REG_FN and DF_REG_REG macros are used to extract
the function number and the register offset from the register defines.
This will allow having one define for accessing an indexed group of
registers that are on different functions of the data fabric device.
TEST=MMIO resources read from the data fabric's MMIO decode registers
don't change on Mandolin and the ACPI CRAT table is also identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63a284b26081c170a217b082b100c482f6158e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76886
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Once platform code has filled in the (legacy) ACPI PM register
map, added function will fill in the extended entries in FADT.
TEST=samsung/lumpy and amd/mandolin FADT stays unchanged.
Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Use ARM architectual timer by initializing frequency to 13 MHz. Since
system timer is the source of the architectual timer, we also call
`timer_prepare` in `init_timer`.
BUG=b:229800119
TEST=run `suite:faft_bios` to verify the firmware stability.
check timestamps by cbmem.
Cq-Depend: chromium:4747539
Change-Id: I8b1348044e4c92984510604b7f61611e13284d86
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76919
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the device and soc directories that don't already have an
SPDX license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I89c05c7c1c39424de2e3547c10661c7e3f58b8f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Inspect all type-C USB ports, check if there is a USB device attached,
and if so, send the connection request to the PMC. This allows for any
attached USB2/USB3 devices to be used for booting by the payload.
Since this functionality is only needed by ChromeOS devices with TCSS
running upstream coreboot, introduce a new Kconfig to guard its use.
Boards needing it will select it in subsequent commits.
TEST=tested with rest of patch train
Change-Id: I69522dbcc8cae6bbf41659ae653107d0e031c812
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72909
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Variable 'i' is unsigned, so use %zu vs %zd.
Change-Id: I5f5b28796b30285e81a94c37e686a9e763cab204
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76943
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Include multiple hash tables into relevant CBFS.
BUG=b:277292697
TEST=Ensure that all multiple hash tables are part of Myst BIOS image
with PSP verstage enabled.
Change-Id: I1601f4a01db5b2bbf8b5636ef9e69e41c1d9a980
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76589
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On mainboards using Phoenix SoC with PSP verstage enabled, to
accommodate growing number of PSP binaries, multiple smaller hash tables
are introduced. Also some hash tables are in V2 format identifying the
concerned PSP binaries using UUID. Add SVC calls to support multiple
hash tables with different versions.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Ensure that
all the hash tables are injected successfully. Ensure that PSP validated
all the signed PSP binaries using the injected hash tables successfully.
Change-Id: I64e1b1af55cb95067403e89da4fb31bec704cd4f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76588
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently PSP verstage updates PSP bootloader with one unified hash
table containing hashes for all the signed PSP binaries to be validated.
With growing number of PSP binaries to validate and memory constraints
in PSP, there is a requirement to split and update the hash table into
multiple smaller chunks. Hence change the update_psp_fw_hash_table()
signature such that the hash tables are updated in a chipset specific
way.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP verstage enabled. Build the
Skyrim BIOS image and confirm that the hash table is identical before
and after this change.
Change-Id: I75aac5bc5e7f61069be25d801d0838fdf565d3d1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76587
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
