i810 chipset. Not all hardware has been tested, but my test PC boots Linux
(via FILO) without any problems.
Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).
In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:
Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c (Revision 4393)
+++ src/devices/pci_rom.c (Arbeitskopie)
@@ -87,7 +87,7 @@
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
rom_data->vendor, rom_data->device);
- return NULL;
+ // return NULL;
}
printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n",
The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...
Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb.
Importantly, this also sets
default CONFIG_AP_CODE_IN_CAR=0
in
src/mainboard/supermicro/h8dmr/Options.lb
which is required to make this box boot since the changes that went in in
r4315.
At Myles' suggestion, this patch also sets
default CONFIG_USE_FAILOVER_IMAGE=0
default CONFIG_USE_FALLBACK_IMAGE=0
default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
in src/mainboard/supermicro/h8dmr/Options.lb to simplify
targets/supermicro/h8dmr/Config.lb a bit further.
Build tested with abuild, boot tested on physical hardware.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.
Patch should work against r4381 (or later ?)
This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)
The coreboot_table issue seems to have been automagically resolved by
the latest core files.
It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's basically done with the following script and some manual fixup:
VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Note that this board is nowhere near usable, further patches will follow
and hopefully get this into buildable and usable shape.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4376 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots
Linux fine. Detailed status at:
http://www.coreboot.org/Soyo_SY-6BA_Plus_III
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range:
[0x00000000000f0000, 0x0000000000100000)
Ram areas
[0x0000000000000000, 0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000) RAM
[0x0000000000100000, 0x000000000fff0000) RAM
[0x000000000fff0000, 0x0000000010000000) Reserved
SELFBOOT RETURNED!
Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024);
+ ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ways superior to v3, while lacking its completeness. But, one nice
thing: no more included .S or .c files. It's all separate compilation.
That should allow our Makefiles to work much better.
Note that the current non-CAR implementation is the default and
continues to work (tested FILO boot to Linux on both CAR and non-CAR).
Index: src/mainboard/emulation/qemu-x86/Config.lb
Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that
depend on this variable are grouped in one if, and the other parts
(romcc etc.) are in the else. This change is a model of how we should be
able to do other motherboards.
Index: src/mainboard/emulation/qemu-x86/Options.lb
add needed options.
Index: src/mainboard/emulation/qemu-x86/failover.c
remove code inclusion from this not-yet-used file.
Index: src/mainboard/emulation/qemu-x86/rom.c
This is the entry point for the rom-based code. Called stage1.c in v3.
Index: src/lib/Config.lb
change initobject to a .o from a .c; this fixed a build problem.
Index: src/pc80/serial.c
make uart_init non-static.
Index: src/pc80/Config.lb
add initobject
Index: src/arch/i386/init/entry.S
Entry point. Unify a bunch of files that were fiddly lttle includes. From v3.
Index: src/arch/i386/init/ldscript.ld
new file. The goal is to hang all init changes for CAR here, to minimize other changes to any
other ldscript. Besides, putting this in init makes sense; entry and car are manage init.
Index: src/arch/i386/init/car.S
generic i386 car code from v3.
Index: src/arch/i386/init/ldscript_fallback_cbfs.lb
Fix what looks like a bug: this was not including the init.text section.
Index: targets/emulation/qemu-x86/Config.lb
push up the console loglevel. qemu is for debugging so we might as well
get all the debugging we can.
Index: targets/emulation/qemu-x86/Config-car.lb
For CAR bullds.
Signed-off-by: Ronald G. minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.
This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.
Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
as it's done everywhere else
- change the default config of abuild to not
provide ROM_IMAGE_SIZE values for the images
in a CBFS configuration
- change abuild's crosscompile autodetection to
not try to use "i386-elf-i386-elf-gcc" (which
is bogus)
Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS
The changes in util/abuild/abuild are trivial and
abuild tested.
As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4325 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
reduce the size of the bootblock (done for kontron/986lcd-m)
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Vincent Lim <vincent.lim@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4289 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
I would like to remind you that this firmware enables the hardware
virtualization on the AMD cpu's on the machine. That feature was
explicitly disabled by the factory BIOS.
Due to an error in the VGAROM no other rom loader (YABEL or X*^BIOS)
than SeaBIOS manages to load the VGA rom. The VGA ROM tries to read
config space of a device that is actually not present.
Because SeaBIOS does not support AHCI SATA it can not start the
bootable drive of the machine so i had to add filo to seabios to
manage booting:
./cbfstool coreboot.rom add-payload filo.elf img/FILO
Signed-off-by: Samuel Verstraete <samuel.verstraete@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
A manual build was yielding section overlaps, so increase
ROM_IMAGE_SIZE to the same size the Config-abuild.lb is using.
Build-tested by me using a manual build.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
because it was not working anyway (it was hardcoded) and because it allows me to
fix the XIP base to something sane (and use generic computation and approach)
This board is bit tricky because until now it required the VGA BIOS on the flash
start. XIP will work with 64KB aligned base, therefore the VGA ROM image must be
aligned too to 64KB.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4265 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4260 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
models 6ex and 6fx (core and core2 solo and duo). Also, use the names suggested
by Intel for the microcode files instead our short version of it. This allows to
create new microcode patches with a simple set of scripts.
* some minor cpu setup fixes for c and p states
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
trivial patch.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4214 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
tested, incl. optionrom-in-cbfs for kontron, and compressed payloads
for both.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4212 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the appropriate mainboard sources.
Signed-off-by: Mondrian nuessle <nuessle@uni-hd.de>
Acked-by: Samuel Verstraete <samuel.verstraete@gmail.com>
I updated some whitespace and the Config files. - Myles
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4184 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to the specified value.
Only change Config-abuild.lb, as the others are for manual buildtarget
use - adding __LOGLEVEL__ there would kill the build as it isn't
replaced by the actual content.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4153 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is a pretty standard "yet another 440BX" target, so the code
is pretty straight-forward. It's a dual-CPU machine, which might need
some fixing, I'm booting with 'maxcpus=0' for now. It does boot
successfully up to a Linux login prompt, though.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4126 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- don't make users pick the name. Names for option roms are in the v3-defined
format of pci%04x,%04x.rom with the vendor and device id filling in the
%04x.
- users pass in vendor and device id.
- users pass in a dest. If the dest is 0, the address of the ROM image in
FLASH is returned. If the address is non-zero, then the decmpressor is called,
and it will make sure the ROM image is copied to the destination (even
in the uncompressed case).
move qemu over to always using ROMFS
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4078 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
As I mentioned a few weeks ago, I am in the process of porting this board:
http://www.technexion.com/products/embedded_boards/tim-8690-mt.html
This board has a dual BIOS , choosable with a jumper - much like the BIOS
savier from before - so it is a pleasure to work with as a linuxbios developer.
It is still a work in progress, however , I already submit the patch.
All on board devices and slots work as expected, only need some more stress
testing with the RAM, acpi, etc..
Signed-off-by: Daniel Toussaint <daniel@dmhome.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4075 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The one issues is the SPD address switch for the second CPU. That means that
the memory must be an exact match on each CPU.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Use the (almost) same strict CFLAGS in v2 that we use on v3. And fix a few
include files and missing prototypes. Also, fix up the Config-abuild.lb files
to properly work for cross compiling.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The company is dead.
It causes builds to fail, and that is not a problem we need to have.
Removing it to remove the problems it causes.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
debug code to src/northbridge/amd/amdk8/incoherent_ht.c.
However, printk is not available for all boards at that stage.
I have changed the following boards:
agami/aruma
arima/hdama
asus/a8n_e
broadcom/blast
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms7135
newisys/khepri
sunw/ultra40
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882
abuild works fine for all of them.
agami/aruma needs a Config-abuild.lb which doesn't have fallback and
normal due to size problems.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3829 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Michael Gold