Time for the brown paper bag: OHCI controllers are not happy when
told to send data, but with obviously wrong addresses. It helps
to write the addresses into the data structures.
Change-Id: Ic0967dc8939e64af119cfb89400a045a2c077171
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/306
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This was mentioned several times already, how about we get it in?
It avoids cbfstool to fail because path/to/"file" doesn't work.
Change-Id: Ia01acbd78f81a5db890fd1573a2f3cbe1450562f
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/305
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
also clean out a local copy of ntohl in yabel.
Change-Id: Iffe85a53c9ea25abeb3ac663870eb7eb4874a704
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/288
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Those modules have basically the same Super I/O capabilities as
the Docking station. Unfortunately, the Super I/O in the module
shares the same I/O address as the Docking station, so we're not
allowed to connect the LPC Docking Bus if such a module is present.
To be able to detect this device and use it as early console for
coreboot, we have to initialize the GPIO Controller before, as
this device is detected via GPIO06.
Change-Id: If7c38bb6797f76cf28f09f3614ab9a33878571fb
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/282
Tested-by: build bot (Jenkins)
Patch is required to compile this with romcc.
Change-Id: I5c4c0f5b32e5edeb8c48d8455b3493ca79f8b452
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/291
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
This makes the power_on_after_fail NVRAM option work correctly.
Change-Id: I96f05f82d7f133b343cf8d4ef09db50a3db7a83d
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/292
Tested-by: build bot (Jenkins)
and add drivers/generic/generic back (empty), since it is used by many
devicetree.cb files.
Without this patch typos in component names in devicetree.cb cause
the component to be silently ignored.
Change-Id: I3cfca2725816f0cd7d72139ae53af815009e8ab4
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/270
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
That's what SeaBIOS does, too, and it works just fine.
Change-Id: I3e17c15848aca86f775fc86f4ad906c820625887
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/269
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
config.h defines also unset config options (as "0") so #ifdef
matches both settings, which isn't what we want.
Change-Id: I694e1b8a8ec4c20225d7af1a13a2a336f900e643
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/293
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A mainboard may require configuration of the superio pins to fully
support some features. Things like A20# gate, leds, fans, infra-red
and bootstrap jumpers may be configured and controlled through the
logical PME device.
Change-Id: I6e77ff0295806ba3dff339013f73d99c2961388f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/289
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As new microcode files were included, the table was not updated with
families 0f25 and 0f26.
Change-Id: I5bb8be9d7c37eb8406dcb48a4b933eab24639bda
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/290
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Our cmos checksum is inverted to what the Linux /dev/nvram device expects (and
BIOSes use). This makes it impossible to use /dev/nvram with coreboot. Fix it!
Change-Id: I239f7e3aca05d3691aee16490dd801df2ccaefd1
Signed-off-by: Vadim Bendebury <vbendeb@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/279
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Also add a meaningful define (Not hooked up in Kconfig, that might
or might not follow)
Change-Id: I9cc4bca0d23d75e6a1d767932ec62e8c68b39d71
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/278
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
If a file can't be added by cbfstool, print the type and name of the file
in the error message.
Change-Id: I369d6f5be09ec53ee5beea2cfea65a80407f0ba3
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/271
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
After a lot of experimentation this commit improves some hardware
features that were not recognized or incorrectly configured before.
The only thing not tested is SCSI-option board (I dont have one).
Misleading errors in comments have been corrected.
(Note BTW that the DL145 G1 mainboard is identical to AMD Serenade
which was supported in early versions of coreboot but was dropped
for some reason.)
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Change-Id: Ibbd97fafad22196b1e18d0b257731490339f113e
Reviewed-on: http://review.coreboot.org/237
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
First issue fixed:
For multi-socket CPU the current implementation emitted
Processor objects for cores in the first CPU only. This
commit fixes the bug by really emitting one Processor
object for each core. However, the unlikely case of mixed
CPU models is still not handled correctly.
Second issue fixed:
One loop was wrong in case a processor in the table declares
no P-states at all. The rewritten loop is safe. Some possibly
dangerous array lengths were also fixed.
Third issue: on MP-boards the recommended ramp-voltage (RVO) is 0mV
according to the BKDG. The current implementation always set it
to 25mV. This commit selects 0 or 25mV depending on CONFIG_MAX_PHYSICAL_CPUS.
Fourth issue: If a processor without PowerNow! support was inserted in a
system with coreboot configured with SET_FIDVID then the boot process hanged
mysteriously and very early. Apparently because init_fidvid_ap tampers with
non-existing registers. This commit fixes the bug by bailing out
from init_fidvid_ap if PowerNow! capability is missing.
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Change-Id: I61f6e2210b84ccba33a36c5efc866447b7134417
Reviewed-on: http://review.coreboot.org/239
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
According to Rudolf Marek putting a memory instruction between
the CR0 write and the jmp in protected mode switching might hang the
machine. Move it after the jmp.
There might be a better solution for this, such as enabling the cache, as
keeping it disabled does not prevent cache poisoning attacks, so there is no
real point.
However, Intel docs say that SMM code in ASEG is always running uncached, so
we might want to consider running SMM out of TSEG instead, as well.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Id396acf3c8a79a9f1abcc557af6e0cce099955ec
Reviewed-on: http://review.coreboot.org/283
Reviewed-by: Sven Schnelle <svens@stackframe.org>
Tested-by: build bot (Jenkins)
It's only used in cbfs_and_run.c
Change-Id: Ibcfcefbeb0c5722eb3888f0d60127229a2badcf6
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/273
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
If all console types are disabled, coreboot will fail to compile because
static code is unused. This patch fixes the issue.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ie9c8bf2a78e3aeba4c2908b06bc03f0f5af37db2
Reviewed-on: http://review.coreboot.org/260
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Load an IDT with NULL limit to prevent the 16bit IDT being used
in protected mode before c_start.S sets up a 32bit IDT when entering
ram stage.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I8d048c894c863ac4971fcef8f065be6b899e1d3e
Reviewed-on: http://review.coreboot.org/259
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
gcc 4.6 complains about unused but set variables in x86emu.
Particularly some variables are always set but only used in
debug mode, or when FPU support is enabled.
Change-Id: Ic53bd2303171ab717eb2d2c0ed72744d3eb6989e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/258
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
- Intel option roms want an initialized i8259 or they will
throw an exception 6. This should be done in the southbridge
code, but that is executed much later than the VGA init, so
initialize the i8259 in src/devices/oprom/x86.c.
In the long run this will allow getting rid of some of the
ugly hacks in some AMD boards' romstage.c
- Don't overwrite the mode when copying mode info information back
from 0x600.
Change-Id: Idb01f13dbcd736d8d830b222ffe1ea85799fcd9c
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/257
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
- adds possibility to set a vesa mode without showing a bootsplash
- make bootsplash / mode setting code available in real mode.
Change-Id: I0045c9d75757657f4ce531889593102ea1e39ce5
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/256
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
- move int15 handler out of the generic code into the mainboard directories
of those mainboards that actually use it.
- move vbe headers to vbe.h
- move function prototypes used in native oprom code to x86.h
Change-Id: Idfff5e804ea328f7b5feebac72497c97329320ee
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/255
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
1.6.3 has a lot of benefits over the previous version, the two
most important being:
- working AHCI support
- compiles with gcc 4.6.x
Change-Id: Ie3a4d8f2624e0aa85e48ca09da53474c085838db
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/253
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
newer gcc versions generate ".section .text" instead of just ".text"
in their assembler output. This patch makes sure that we don't end up
with a superfluous ".section" that makes the build fail.
Add -Wno-unused-but-set-variable to CFLAGS if the flag exists.
Change-Id: I7f24c987433cc5886dde2af27498d3331cbda303
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/252
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
That function broke SMP on Linux 2.4, now it works.
Change-Id: I4ddd25fef57bed64877959ca96cca68170042bca
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/243
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Each variable is essentially unused or incorrect.
Change-Id: I4d2a10c9b45306ac6e6026a31765d3b912fd855c
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/242
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Otherwise with a coreboot log on COM2 (which doesn't work) the boot
process takes eons.
Change-Id: I886f98b715c1f384c8693f2977671ff15897b5a5
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/241
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
The last couple of lines of every mptable function were mostly
identical. Refactor into common code, a new function mptable_finalize.
Coccinelle script:
@@
identifier mc;
@@
(
-mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
-mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
-printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
-return smp_next_mpe_entry(mc);
+return mptable_finalize(mc);
|
-mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
-mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
-return smp_next_mpe_entry(mc);
+return mptable_finalize(mc);
)
Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/246
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
We copied pretty much the same code for generating mptable entries for
local interrupts (with some notable exceptions).
This change moves these lines into a generic function "mptable_lintsrc"
and makes use of it in many places.
The remaining uses of smp_write_lintsrc should be reviewed and replaced
by mptable_lintsrc calls where possible, and smp_write_lintsrc made static.
This patch was generated using Coccinelle:
@@
expression mc;
expression isa_bus;
@@
-smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0);
-smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1);
+mptable_lintsrc(mc, isa_bus);
@@
expression mc;
expression isa_bus;
@@
-smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0);
-smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1);
+mptable_lintsrc(mc, isa_bus);
@m@
identifier mc;
expression BUS;
@@
-#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin));
...
-IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
-IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+mptable_lintsrc(mc, BUS);
Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/244
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Use the SSDT autogen infrastructure to support the automatic reserved resources,
automatic P-state generation and automatic _CRS PCI0 method.
Change-Id: Ic56a92eeb70a0a2a2d6de2507009ec3a832c83b3
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/251
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a ACPI Source Language snippet to superio/w83627hf which maps the
SuperIO and most of the logical devices to PnP devices, exposing
configuration options and chip power management to the OS.
Written using the Winbond W83627HF/F datasheet.
Change-Id: I1108d29b341ef78fe7f1e574f98b680aada39daf
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Reviewed-on: http://review.coreboot.org/223
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Add a ACPI Source Language snippet which if included as
shown in the comments in the file, exposes the 4 possible
temperature sensors in the CPU as ACPI thermal zones.
Change-Id: I94dd773108e348a0fdb9d2f8d6cfe415d5fa0339
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Reviewed-on: http://review.coreboot.org/222
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
SB800 RAID ROM require to put the misc ROM to specific position,
this patch enable user to put the RAID misc ROM to the right place
in the coreboot image.
Change-Id: I4fc64df8e091fb0cccd063826ab31a4f198942d1
Signed-off-by: Kerry She <kerry.she@amd.com>
Signed-off-by: Kerry She <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/249
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
In order to make sure AHCI/RAID ROM works correctly
For SB800_SATA_AHCI or SB800_SATA_RAID mode, SATA should
enable bus master and the ahci also should be enabled.
Change-Id: I9d9c557816d364d8373fe343860ad5fe45988200
Signed-off-by: Kerry She <kerry.she@amd.com>
Signed-off-by: Kerry She <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Patrick Georgi