Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
Not strictly required for binaryPI boards, but do this for
consistency.
Change-Id: Id0bbbfb6f695c4bb920bc57a1e9362a23884efb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
For x86 we define .id linking explicitly elsewhere.
Change-Id: I43f849465e985068cd0b8a1944213b7c26245b8d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Setting the default values for GPIO community power management, causes
issues in detecting TPM interrupts. So to avoid that GPIO PM has to be
disabled in devicetree. But for S0ix it is needed. This patch implements
a workaround in ASL code to enable GPIO PM on S0ix entry and disable it
on S0ix exit.
This patch adds the following three platform specific methods.
1. MS0X to enable power management features for GPIO communities on
low power mode entry and disables it on exit.
2. MPTS to enable power management features for GPIO communities when
preparing to sleep.
3. MWAK to disable power management features for GPIO communities on
waking up.
BUG=b:153847814
TEST=Verify S0ix is working. GPIO PM configuration is upadated on low
power mode entry and exit.
Change-Id: I7225b78ab2ac5bf17f93230cd85cd21e836d807d
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41502
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SPD sources for Dedede and Volteer are being auto-generated by SPD
tools now, and so we can remove SPD_SOURCES from Makefile.inc for
those templates. That makes Makefile.inc empty for those reference
boards, so remove Makefile.inc from the templates.
BUG=b:158492307
BRANCH=None
TEST=Create new variant of volteer, waddledee, and waddledoo, and
verify that we can still build the coreboot image.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Iba5264384302300cc8d2256a6b43f3353770154a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42204
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds Hot-Plug and power management event handers(_L61 &
_L69) respectively for Thunderbolt in the GPE scope. The _L61 method
invokes sub-method HPEV to support Hot-Plug wake event from Thunderbolt
PCIe root ports. This method intercepts Presence Detect Changed
interrupt and make sure the L0s is disabled on empty slots. The _L69
method checks and clears root port's PME SCI status.
BUG=b:156435065
TEST=Verified multiple hot plug successfully with Lenovo dock.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I022cf4aa3f2ee459b9dc87849494e10755d995c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The ACP device sits behind a bridge. Despite the logs indicating
the bridge is likely hooked up, there's some unusual behavior of
writes not sticking. Aside from the speculation of what's causing
the issues the initialization of the device should occur at init()
because of these potential dependencies.
BUG=b:155882600
Change-Id: I8fa83d7d1d4f356c56971d4175a2ae6497a92fb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42231
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Board devicetrees requests for drivers/pc80/tpm but that
was not included for the build. Note that there is actually
no on-board TPM, just an LPC header connector on these boards.
Change-Id: Ia959ae9072e3fc709b779b1fc778eb82e10c2ee3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The GCC 10 GNAT toolchain uses a new exception handler ABI, so older
GNAT cannot be built with GCC 10. This patch backports the new
exception handler in libgnat to make GNAT able to be built.
The libgnat patch doesn't remove the old exception handler, so it can
still be built with older compilers.
The cross toolchain can now be built with GCC 10.1.0 in Arch Linux
(with the latest IASL in CB:38907 that can be built in Arch), and the
toolchain can build a working coreboot image with libgfxinit for HP
EliteBook 2560p.
The original and patched crossgcc built with Debian 10.4 GCC 8.3.0,
and the patched crossgcc built with Arch GCC 10.1.0 generate identical
coreboot images with `make BUILD_TIMELESS=1`.
Change-Id: I757158056bf4698d3c68715e026c226615bc70a1
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42158
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the comments of
https://review.coreboot.org/c/coreboot/+/41719
, which is about Microcode patch for amd/picasso.
Change the code with the same way.
The changes include:
1. combine the microcode_xxx.c and update_microcode.c
into one source.
2. Redefine the microcode updating function to eliminate
the parameter. Get the revision ID in the black box.
Reduce the depth of function calls.
3. Get the revision ID by bitwise calculation instead of
lookup table.
4. Reduce the confusing type casts.
5. Squash some lines.
We do not change the way it used to be. The code assume
only one microcode is integrated in CBFS. If needed in future,
41719 is the example of integrating multiple binaries.
And, 41719 depends on the definition in this patch.
Change-Id: I8b0da99db0d3189058f75e199f05492c4e6c5881
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This MSR is used for detecting if the micro code is applied
successfully.
Change-Id: I060eb1a31f3358341ac0d5b9105e710c351f2ce8
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42212
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Setting preferred_pm_profile under sb/ or soc/ overrides the
default determined from SYSTEM_TYPE_xx (or possibly
SMBIOS_ENCLOSURE_TYPE with followup work). This is not desireable.
With the overrides removed, AMD platforms will switch from
PM_UNSPECIFIED to PM_DESKTOP as their preferred profile.
Boards need to either select a pre-defined SYSTEM_TYPE_xx or provide
board-specific mainboard_fill_fadt() should they need to change this.
As they already select SYSTEM_TYPE_LAPTOP, following boards
will change to PM_MOBILE:
google/kahlee
hp/pavilion_m6_1035dx
lenovo/g505s
Change-Id: I45c4a495a4bf3422adae9e22a6e436adef252e77
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The platform_cfg.h files under mainboard/ are a legacy configuration
mechanism used with AGESA family14 boards.
With this change following boards will have FADT preferred_pm_profile
changed from PM_UNSPECIFIED to PM_DESKTOP:
amd/inaqua
amd/south_station
amd/union_station
asrock/e350m1
Change-Id: Ic28761eb238dbbaf3e8f820a29ec64b89f12bf53
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Setting preferred_pm_profile under sb/ overrides the
default determined from SYSTEM_TYPE_xx (or possibly
SMBIOS_ENCLOSURE_TYPE with followup work). This is not desireable.
Boards need to either select a pre-defined SYSTEM_TYPE_xx or provide
board-specific mainboard_fill_fadt() should they need to change this.
As they already select SYSTEM_TYPE_LAPTOP, following boards
will maintain PM_MOBILE:
lenovo/t400
lenovo/x200
roda/rk9
Following will change to PM_DESKTOP:
aopen/dxplplusu
asus/p2b
emulation/qemu-i440fx
emulation/qemu-q35
Change-Id: I2986eb0a8abc94507e9797cc8b64611ae4bd888a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Use a local variable for the ResourceTemplate in the _CRS methods
instead of the RBUF object. When using RBUF, iasl complained that the
_CRS methods need to be serialized, since objects were created in there.
Since those are only used as local variables, just use local variables
for this.
TEST=iasl stops complaining about those methods not being serialized and
Linux still boots and there aren't any related ACPI errors or warnings.
Change-Id: Ic43fcaed5a8b19dbd5634c17f34a159803ba8577
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
- Move the GPIOs that are likely to be volteer-specific (mostly
peripherals) to reside in variants/volteer/gpio.c so that
variants don't have to override too many GPIO settings.
- Modify malefor's gpio.c to adjust for the changes to baseboard's
gpio.c.
- Remove unused GPP_C3 (USB4_SMB_SCL) and GPP_C4 (USB4_SMB_SCA)
settings.
- Remove unused GPP_D9, GPP_D10, GPP_D11, and GPP_D12 settings.
- Remove unused GPP_E8 (SLP_S0IX), COEX, WWAN, and SNDW related
settings for malefor.
- Remove unused GPP_R4 (HDA_RST_L) setting.
BUG=b:157597158
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer SKU4 to kernel.
Change-Id: Ib2f384f539d55a3a8d4a7608336ef22aca3d8c4f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The Connect Topology Command(CNTP) is sent with default timeout value
(0x1388) along with FW CM. The CNTP is supposed to be skipped while
using SW CM. While transition from FW CM to SW CM, the default timeout
value could cause boot time delay up to ~10 seconds. Set this FSPS UPD
ITbtConnectTopologyTimeoutInMs to be 0 in order to avoid the 10 seconds
delay. Future FSP release will evaluate this ITbtConnectTopologyTimeoutInMs
value. While FSP finds this UPD value being 0, FSP will skip sending CNTP.
BUG=b:155893566
TEST=Built image with SW CM Thunderbolt firmware and verified no
outstanding delay time while using FSP v3197 during boot to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I47e3519fd818cb56e6abd16464d8370ffddabc5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42056
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update FSP headers for Tiger Lake platform generated based FSP
version 3197 to include below additional UPD:
FSPS:
ITbtConnectTopologyTimeoutInMs
Signed-off-by: John Zhao <john.zhao@intel.com>
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I06d605b156c1e6f90921c20e0b8fbbe4d64916ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42046
Reviewed-by: Divya Sasidharan <divya.s.sasidharan@intel.corp-partner.google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With SoundWire and USB4 enabled some boards are running out of
memory with all of the ACPI devices and properties. Increase
the heap size to accommodate.
BUG=b:147462631
TEST=Successfully boot on volteer SKU5 board with SoundWire enabled,
before boot was failing with "Error! memalign: Out of memory"
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I0245bdfad93b381871514578e66640e7fe6fa5c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: If7de614d58366158a566563990ee1ecc8c0110bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This reverts commit 04506e2987.
Turned out that `dev->command` is only a `u8` and the way it's used
here is wrong: It is not supposed to reflect the state of the register
but only gathers (lower) bits to be enabled during allocation.
Change-Id: Iacd2b753939e8adcf5aedd4b9cf101638a324aa6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42163
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Taken from Chrome OS update information. Looks like nami encompasses
many different devices, which would not fit in one line, so skip it.
Change-Id: I53405cba269cbfc25bd4618777b946500f173e7e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
I've got hardware to test things on these northbridges, and I am quite
familiar with their code.
Change-Id: Ied5adbb8bad94291a1843531be8a0923464d6212
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: If16d8c4aef3dfd1dbeaf48d6855dd4c0ef328168
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: If7f3f06cd3524790b0ec96121ed0353c89eac595
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Commit 5ac723e (nb/intel: Fix 16-bit read/write PCI_COMMAND register)
uses `pci_read_config8` to read the PCI command register, which does not
correspond with what has been stated in the commit message. Moreover, it
potentially breaks things, as the upper byte of the PCI command register
is now being cleared.
So, restore the original behaviour of the code, using 16-bit accesses.
Fixes: 5ac723e (nb/intel: Fix 16-bit read/write PCI_COMMAND register)
Change-Id: Id2c42ea8551a2fa2fa5c64e8fff8940d8304fbe0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For the sake of completeness, we should provide these operations.
Change-Id: Ia28af94ec86319c7380d8377f7e24e5cdf55dd9c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42145
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The max98357a_platform_driver will turn on/off the speaker enable gpio
based on use, so configure it low to save power.
BUG=None
TEST=Built dedede and tested speaker playback working.
We are seeing a power saving of ~10mW.
Change-Id: I070679457b06cb82633c1197b893a5d89c8b2cf0
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Use x86_setup_mtrrs_with_detect_no_above_4gb() to only
solve the MTRR solution for memory up to 4GiB. This assumes
4GiB to TOM2 is marked as writeback in sys_cfg MSR.
BUG=b:155426691
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ib8358b614682f6a97278f3a60b5ada5e607965af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41898
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AGESA FSP-M implementation is now not updating MTRRs out from
under the caller. As such, remove the save/restore of MTRRs
from the FSP-M call.
BUG=b:155426691
Change-Id: I14f3b18dd373ce17957ef3857920e1c4e2901bbe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The PSP does the memory training and setting up of MSRs for
TOP_MEM and TOM2. Set caching up for all the DRAM areas:
Enable WB caching for 1MiB->TOP_MEM, 4GiB->TOM2.
Enable WC caching fro 0->1MiB except 0xa0000->0xc0000.
BUG=b:155426691
Change-Id: I83916a220ea4016d4438dd4fb5be82dec5506f80
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This tells the PSP where in main memory to copy the vboot workbuf.
BUG=b:152576063
TEST=Build sharedmem destination into AMDFW, verify shared memory
gets placed at that location.
Signed-off-by: Martin Roth <martin@coreboot.org>
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Change-Id: Ie1e955e22632ca5cf146ac6eec0407091e81f519
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2148830
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Change-Id: Id324403afa6d5a5a65ce4709be31e7f16e038da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42044
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For the verstage-on-PSP implementation, we need 2 additional copies
of the AMD firmware tables at non-standard locations. These are
for RW-A & RW-B fmap regions. This change allows us to build the
AMD firmware tables into those regions.
BUG=b:148767300
TEST=boot with psp_verstage, verify boot location
Signed-off-by: Martin Roth <martin@coreboot.org>
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Change-Id: I2b591b50e9b179fdfaead46ff93722fa2a155e9c
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2144534
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Change-Id: I7f841db8617b953dc671a9c12576145f85263581
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Kyösti Mälkki