There are two touch screen controllers on the Palkia device.
One is on the lid; another is on the base. To support
the different control path (for example: turning off the base's
touch event when we don't want to use it however still keeping
the lid's touch event), we use the different gpio pins to control
the second touch. As a result, we need to modify the devicetree
to adopt this change. With this change, we can control the
primary and secondary touch screen controller respectively.
BUG=b:149714955
TEST=lid/base touch screen works correctly
Change-Id: I1f896e334e51c78300af724cbef8d57641ae5612
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Here we consolidate some of the mainboard.c duplication between
Puff and it's variants.
Customizations can be done later via introducing a devicetree
parameterisation.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I75c2de7ae8efd544d800bc77e34e667c3afa4b01
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42672
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the changes added in
commit 80df052d3 "cbmem: Add IDs for TSEG and BERT table data"
No platform uses either ID. TSEG in cbmem is incompatible with stage
cache. BERT reserved data in cbmem is unusable in Linux.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I5501424bfeb38d5ff5432678df9e08b4c16258f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42532
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso's BERT region should not have been moved to cbmem in commit
901cb9c "soc/amd/picasso: Move BERT region to cbmem". This
causes an error of "APEI: Can not request [] for APEI BERT registers.
FSP has been modified to set aside a requested region size for BERT,
simiar to TSEG. Remove the cbmem reservation and locate the region
by searching for the HOB.
BUG=b:136987699
TEST=Check that BERT is allocated
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I20e99390141986913dd45c2074aa184e992c8ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42530
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For some reason, one printk statement begins with `HD Audio` instead of
the more common `Azalia`. Change the different prefix for consistency.
Change-Id: Ia79e340f331b9186cc09b04f925ff9d94204955e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The code is pretty much the same, only differing in a comment and a
printk statement.
Change-Id: Ic404ef466636fc05c2baa70aad8a39bb1b458d42
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reflow some comments and add spaces around an operator.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: I655d74ecbefa664d79b1af805f92cbcf877a43ac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Both i82801gx and i82801jx start with the LPC setup function. For some
reason this isn't reproducible, but it should not effect functionality.
Change-Id: I9d26a151757d60e56ed70181ff7aef48e229d322
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
For consistency with other Intel southbridges, we rename this function
to `i82801ix_lpc_setup`.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: Id8b3bcc9174277e085868866a1b5d90b5c51201a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
These southbridges are not i82801gx.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: I6b4c7bc11bcb668adb0aae463defea982cf9059c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Update to the latest auto-generated UPD files. Add the GUID for the
BERT HOB now being reported.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ia01f626bc85696483173b567bb4f06d308832a91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42529
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide CmdMirror option in chip.h so that it can control CmdMirror FSP
UPD via dev tree.
BUG=b:156435028
BRANCH=none
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Idae9fa439f077f8f3fb16fe74c2f263c008cd5f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42276
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The comment fits in 96 characters, so do it, also getting rid of the
unwanted multi-line comment style.
Add a dot/period to the end of the sentence.
Change-Id: I7b5c7ea5da00d649aa06361e0e0cf2431874a6ec
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Rename function from xeon_sp_get_cpu_count()
to xeon_sp_get_socket_count().
This function returns CPU socket count, by getting it from the field
named as numCpus in FSP HOB.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: Ic96bdf4ab042ac15d43f9b636185627c63fbf8a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42439
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Having speparate types for the status register with three and four block
protection bits respectively doesn't really make sense, it's the same
size either way just a different representation, so one union type will
do.
This allows us to de-duplicate the status register read in
winbond_get_write_protection as well as removing another layer of union
in 'struct status_regs'.
Change-Id: Ie99b98fb6762c8d84d685b110cfc2fd5458b702e
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42111
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SPI_WRITE_PROTECTION_REBOOT seems to be a Winbond thing, other vendors
such as Macronix only support permanent protection but conditional on
the WP# pin state.
Change-Id: Iba7c1229c82c86e1303d74c7bc8f89662b5bb58c
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41747
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove an unneccessary comment and group the variant_early_gpio_table
together based on GPIO group.
Changed static variable name gpio_table to override_gpio_table to be
more descriptive.
BUG=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer to kernel.
Change-Id: Iabe810df1e5a3df35e3543ab81b9fdb6f76c223a
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42577
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the following volteer-specific devices from baseboard's
devicetree.cb into volteer's overridetree.cb file:
- Goodix Touchscreen
- ELAN Touchscreen
- ELAN Touchpad
- SAR0 Proximity Sensor
Adjust the other variant's overridetree.cb files to correspond to
the changes made to the baseboard's devicetree.cb in this change.
BUG=b:159241303, b:154646959
TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot
volteer to kernel and verify that the trackpad works.
Change-Id: I30f8266ec87a7cde293c84d3e687d133207b8d59
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update fw_config definition in devicetree.cb to match current
definition for volteer.
BUG=b:159157584
TEST=none
Change-Id: I761893818231880d86fd13cfa61319157d06a7d5
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42331
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With the stub video_console_init() removed from depthcharge in
CL:2241493, depthcharge will fail to compile:
payloads/libpayload/gdb/stub.c:76: undefined reference to
`video_console_init'
Since video_console_init() is meant to be implemented in
libpayload, libpayload should be consistent with itself by not calling
this function when it's not implemented (i.e., when !LP_VIDEO_CONSOLE).
Therefore, initialize video console only if LP_VIDEO_CONSOLE is set.
BRANCH=none
BUG=none
TEST=USE="menu_ui" emerge-gale depthcharge
Change-Id: Ic45f9073330258cb77301003484ec525b2404180
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42505
Reviewed-by: Joel Kitching <kitching@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The pass through mode (SW CM) RTD3 is not supported until QS platform.
D3Cold is needed to be disabled along with upstream TBT firmware
signed_TGL_HR_4C_A0_rev6_pre4_SW_CM_PM_support_ENG_VER_perst_check_fix.
This temporary patch will need to be reverted once PM RTD3 support is
validated on QS platform.
BUG=b:159050315
TEST=Verfiy PM S0ix along with upstream TBT firmware.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I98ed991e4185abf1f3168e33b099e0e97c9075f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42504
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Divya Sasidharan <divya.s.sasidharan@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Using guidance from Intel, a new set of power limits (PL1, PL2 & PL4)
are available for TGL-U. They are dependent upon the SKU of the CPU
that the mainboard is running on. Volteer is updated here to use these
new limits.
To accomplish this, the SoC chip config's power_limits_config member
was expanded to an array, which can be indexed by POWER_LIMITS_*_CORE
macros. Just before power limits are applied, the correct set of them
is chosen from the array based on System Agent PCI ID. Therefore, a
TGL board should have two sets of power limits available in the
devicetree.
BUG=b:152639350
TEST=On a Volteer SKU4 (4-core), verified the following console output:
CPU PL1 = 15 Watts
CPU PL2 = 60 Watts
CPU PL4 = 105 Watts
Change-Id: I18a66fc3aacbb3ab594b2e3d6e2a4ad84c10d8f0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
This allows the kernel to runtime suspend these devices and properly
shut them down. If a tty is not used, the kernel will disable the
device.
I omitted UART0 because the PSP will not power the controller before
accessing it. This causes PSP boot failures. See b/158772504. We also
can't enable UART0 D3 until we stop using the mmio kernel command line
`console=uart,mmio32,0xfedc9000`. The kernel will suspend the UART
controller before it notices that the mmio address matches ttyS0. This
causes the kernel to fail writing to the UART. So we need to move over
to `console=ttyS0`.
BUG=b:153001807, b:157617092, b:157858890, b:158772504
TEST=Boot trembyle and see I2C devices entering and exiting D3.
* See the UART devices entering D3
* Made sure the i2c peripherals were still functional.
* Ran suspend stress test for 40+ iterations.
[ 0.349094] power-0362 __acpi_power_on : Power resource [FUR1] turned on
[ 0.350627] power-0362 __acpi_power_on : Power resource [FUR2] turned on
[ 0.352094] power-0362 __acpi_power_on : Power resource [FUR3] turned on
[ 0.353626] power-0362 __acpi_power_on : Power resource [I2C2] turned on
[ 0.376980] power-0362 __acpi_power_on : Power resource [PRIC] turned on
[ 0.399997] power-0362 __acpi_power_on : Power resource [PRIC] turned on
[ 0.401953] power-0362 __acpi_power_on : Power resource [I2C3] turned on
[ 0.403460] power-0362 __acpi_power_on : Power resource [I2C4] turned on
[ 0.483646] power-0418 __acpi_power_off : Power resource [I2C4] turned off
[ 1.028404] power-0418 __acpi_power_off : Power resource [I2C3] turned off
[ 1.448426] power-0418 __acpi_power_off : Power resource [I2C2] turned off
[ 5.308094] power-0418 __acpi_power_off : Power resource [FUR1] turned off
[ 5.340833] power-0418 __acpi_power_off : Power resource [FUR2] turned off
[ 5.382041] power-0418 __acpi_power_off : Power resource [FUR3] turned off
[ 5.423861] power-0362 __acpi_power_on : Power resource [I2C3] turned on
[ 6.698225] power-0362 __acpi_power_on : Power resource [I2C2] turned on
[ 6.856573] power-0418 __acpi_power_off : Power resource [I2C3] turned off
[ 8.246970] power-0418 __acpi_power_off : Power resource [I2C2] turned off
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I04c4a729d4cb9772ab78586fdbb695b450cc1600
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add RW_MRC_CACHE flash region to hold MRC cache data.
With memory training skipped for subsequent reboots, the boot
time is reduced by 8 minutes on OCP Delta Lake server, when
FSP verbose logging is turned on.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I27ed00100e1ea9e29b0e71ea5a8397cd550e193a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42025
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
OCP Delta Lake server is a one socket server platform powered by
Intel Cooper Lake Scalable Processor.
The Delta Lake server is a blade of OCP Yosemite V3 multi-host
sled.
TESTED=Successfully booted on both YV3 config A Delta Lake server
and config C Delta Lake server. The coreboot payload is Linux kernel
plus u-root as initramfs. Below are the logs of ssh'ing into a
config C deltalake server:
jonzhang@devvm2573:~$ ssh yv3-cth
root@ip's password:
Last login: Mon Apr 20 21:56:51 2020 from
[root@dhcp-100-96-192-156 ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 52
On-line CPU(s) list: 0-51
...
[root@dhcp-100-96-192-156 ~]# cbmem
34 entries total:
0:1st timestamp 28,621,996
40:device configuration 178,835,602 (150,213,605)
...
Total Time: 135,276,123,874,479,544
[root@dhcp-100-96-192-156 ~]# cat /proc/cmdline
root=UUID=f0fc52f2-e8b8-40f8-ac42-84c9f838394c ro crashkernel=auto selinux=0 console=ttyS1,57600n1 LANG=en_US.UTF-8 earlyprintk=serial,ttyS0,57600 earlyprintk=uart8250,io,0x2f8,57600n1 console=ttyS0,57600n1 loglevel=7 systemd.log_level=debug
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I0a5234d483e4ddea1cd37643b41f6aba65729c8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Each IIO stack has a personality. Only when personality of a stack is
TYPE_UBOX_IIO, the stack has PCIe devices.
For example, for CPX-SP, the stack 3 has personality of TYPE_UBOX, it
does not have PCIe devices.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I2f6bfdac4d1110dd95f1b3a72e2e51f70c79212b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42333
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's a useless check with both branches doing the same: enabling RC6
and disabling RC6p. In past, this condition would enable RC6p in IVB but
not on SNB. Then, at some point, RC6p was considered unstable and was
disabled, but the condition remained.
It's not needed so let's remove it.
Change-Id: I926bb682d1b9d21185048224490b966c33204b6a
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add processor power limits control support to configure values for
jasperlake soc based platforms.
BRANCH=None
BUG=None
TEST=Built for dedede system
Change-Id: Ib5502b225c1158c1f0729ce799ed0b8101f0233f
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PCI device is used for debugging only and as Windows 10 has no
default driver for it, disable it to not scare end users about "missing"
drivers.
Change-Id: I0b42a9b55f00826c5920c1c259b38382bdcdde72
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42509
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Program PCU (Power Control Unit) during chip_final(). This
is needed to allow ACPI power control related feature to work
in target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I1f5b18d66b351acecdc7b3f515a552c36f08eb61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
TGL RVP and Volteer use ov8856 camera module from different vendors.
TGL RVP from Foxlink and Volteer from Sunny. ov8856 sensor is identical
for the two modules but VCM and EEPROM are different. Originally,
Volteer ACPI was set to align with Sunny module, GT9679. But it turned
out GT9679 is compatible with Foxlink's DW9768. So Volteer camera ACPI
configuration doesn't need to keep GT9679.
BUG=b:158188369
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check user-facing camera functionalities.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I792608f86a59b16545dfa4edf6508de7a444bb26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
This change updates platform.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for volteer.
Change-Id: I248f5e9a1e3ba4f6426167f0406073252cc6513a
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42506
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change selects IDT_IN_EVERY_STAGE so that the interrupt handlers
are provided for all stages.
Change-Id: I25ced7758264fb14998ab5f31ff778c1af11eb05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In waddledee and waddledoo, discrete & integrated BT signals are routed to
different USB ports. In all the other variant boards, discrete &
integrated BT signals are routed to the same USB port (port 8 - index 7).
Re-configure the USB devices accordingly.
Also device configuration in override tree are applied only if there is a
matching device in base devicetree. So configure all the USB devices in
base devicetree and turn them off.
BUG=b:154064148
TEST=Ensure that the SSDT contains the ACPI objects for enabled USB
devices.
Change-Id: I1b8bf7f4db1d2661f310bf4874428a6d1de222c6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42554
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Most LAPIC registers are 32bit, and thus the use of long is valid on
x86_32, however it doesn't work on x86_64.
* Don't use long as it is 64bit on x86_64, which breaks interrupts
in QEMU and thus SeaBIOS wouldn't time out the boot menu
* Get rid of unused defines
* Get rid of unused atomic xchg code
Tested on QEMU Q35 with x86_64 enabled: Interrupts work again.
Tested on QEMU Q35 with x86_32 enabled: Interrupts are still working.
Tested on Lenovo T410 with x86_64 enabled.
Change-Id: Iaed1ad956d090625c7bb5cd9cf55cbae16dd82bd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36777
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Edward O'Callaghan