The GPIO pins for UART 0 on Fizz are routed to the add-in card slot
and should not be used as a UART device. coreboot is setting the
pins to GPIO Mode but FSP is re-configuring them for Native Mode
and the behavior is unexpected when the kernel tries to initialize
the UART device.
The UART 0 device is PCI function 0 so it needs to be enabled for
other functions to be visible to the OS so it can't just be disabled.
Instead, set the device to PchSerialIoSkipInit so that FSP will not
change the pin state.
BUG=b:73006317
TEST=Tested with add-in card on fizz hardware to ensure the pin state
does not change when FSP runs or the kernel boots.
Change-Id: Id97c1e482ef0d5642fcf9018d802e1d0e073263d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/24973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This reverts commit 2e81f394cf, as it will
have side effect that will make system shutdown failure. System will not
enter S5 sleep state, instead a global reset will be generated.
Once camera driver ACPI framework ready, isclk programing will be moved
into APCI method, in _PS3, isclk will be turned off to save power.
BUG=b.72532565
BRANH=master
TEST=Apply the changes and flash coreboot, on meowth devices, issue
"halt" in OS stage, system can shutdown successfully.
Change-Id: If35697911f97c524d9b52bdf4dae5c9ef1cc8618
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25006
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support for variants to use secondary SPD if
required. This enables a variant to have different types of memory
supported using the same image.
BUG=b:73514687
Change-Id: I3add65ead99c510f2d6ec899fbf2cb9a06c79b0c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/24972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Similar to Soraka, this change sets the pch_trip_temp value to
75C. This is important so that PMC can shutdown the thermal sensor
when CPU is in C-state and DTS temp <= pch_trip_temp.
BUG=b:74089135
Change-Id: Ic46fa0681796b821dfb014ab91734c960df7846a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/24968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Commit d2d2aef6a3 (sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a
common location) makes some platforms use the wrong OIC register defi-
nition. It was extended to 16-bit in the corporate version of ICH10.
So let's give the new size and location a new name: EOIC (extended OIC).
This only touches the systems affected by the mentioned change. Other
platforms still need to be adapted before they can use the common RCBA
definitions.
Change-Id: If9e554c072f01412164dc35e0b09272142e3796f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/24924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Bill XIE <persmule@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Turn on pcie ports 9,10. Enable Root Port 9 and set up clkreq 3.
BUG=b:72120814
TEST: Boot to OS via NVMe
Change-Id: I272b63b11e6b00ae5bdbef5a37ee517cc0636f6d
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/23208
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2760p: enable PCIe
8470p: enable mSATA
8460p: enable PCIe, also add comments according to circuit diagram
2570p: comment for some USB ports
Change-Id: Ib5209f2dfb249fca5bae89bc6da3b704c8e903dd
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/23357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bill XIE <persmule@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Intel DCI (direct connect interface) allows debug Intel target using
USB3.0 ports. It will support debug via USB stack (DCI Dbc) using USB3.0
only.
BUG=None
TEST=Turn on DCI trace hub in descriptor.bin and flash the coreboot
image. Using DAL to halt/run CPU.
Change-Id: I39e68dabfcb9e659733019334299e562eee3681d
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/23446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
If switch to VT2 on nautilus, screen flicker appears. We found if we
rollback the change of slew rate setting, then the flicker issue will
be gone: https://review.coreboot.org/c/coreboot/+/22588
But nautilus board needs slew rate tuning to reduce EE noise, so we
decided to change only SlowSlewRateForSa to 2 (Fast/8) instead of
rollback the whole change of the CL:22588. It can remove the flicker on
VT2.
BUG=b:71397040
BRANCH=master
TEST=emerge-nautilus coreboot
Change-Id: Id1d4bd8b1316c02c783de708ec4658e030193a26
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/23877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Due to there are some chances USB devices can not be detected.
USB2 port#1 and #4 PHY register need to be overridden for variants
Santa/Lava/Blue/Bruce/Astronaut.
port#1:
PERPORTPETXISET = 4
PERPORTTXISET = 4
IUSBTXEMPHASISEN= 1
PERPORTTXPEHALF= 0
port#4:
PERPORTPETXISET = 7
PERPORTTXISET = 7
IUSBTXEMPHASISEN= 1
PERPORTTXPEHALF= 0
BUG=b:72623892
BRANCH=master
TEST=emerge-coral coreboot chromeos-bootimage
Change-Id: I401905685cc3078df657919b162272c3de320296
Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com>
Reviewed-on: https://review.coreboot.org/23881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The GPIOs for PCIe reset and power enable for WLAN must be set up before
amdinitearly for wlan to function.
BUG=b:73898539
TEST=Boot, see WLAN controller in lspci
Change-Id: I568a3240a54817ab6dcf15fe39f7f1336943852b
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/24916
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- consolidate commonality in meowth and zoombini's SPD makefiles into
a common zoombini/spd/Makefile.inc
- move all SPD hex files into zoombini/spd directory
- move SPD_SOURCES definitions to variants/$(VARIANT_DIR)/Makefile.inc
BUG=b:69011806,b:71776625
BRANCH=master
TEST=Verify 'emerge-meowth coreboot' and 'emerge-zoombini coreboot'
compile and boot successfully.
Change-Id: I2291ebaf0ef5da1b22eb0e8fa7af8dbb50848c29
Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Reviewed-on: https://review.coreboot.org/23874
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Many generations of Intel hardware have identical code concerning the
RCBA.
Change-Id: I33ec6801b115c0d64de1d2a0dc5d439186f3580a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Coverity scan has found an error where a NULL pointer is dereferenced.
The bug would happen if the devicetree does not contain a valid entry
for PCA9538. In this case the code
* if (dev->path.i2c.device == PCA9538_SLAVE_ADR)
would dereference to a NULL pointer.
This patch fixes this issue. Thanks coverity!
Found-by: Coverity (CID 1386126: Null pointer dereferences (REVERSE_INULL))
Change-Id: I75e271d86c16fa3938420c43575ebba910f6a2fd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/23808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Our CFM daughter card would like to use individual PCIe lanes for two
different devices on the card.
dlaurie@ has reconfigured PCIe port 9-12 from 1x4 to 1x2 + 2x1 on b2b
connector on fizz to meet the requirement:
https://chrome-internal-review.googlesource.com/571936
We also need to enable the ports on device tree.
BUG=b:72523836
TEST=none
BRANCH=fizz
Change-Id: Icded9850d833752680e0174b6c476e657817b319
Reviewed-on: https://chromium-review.googlesource.com/923867
Commit-Ready: Zhongze Hu <frankhu@google.com>
Tested-by: Zhongze Hu <frankhu@google.com>
Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/924860
Commit-Queue: Shelley Chen <shchen@chromium.org>
Tested-by: Shelley Chen <shchen@chromium.org>
Signed-off-by: Zhongze Hu <frankhu@chromium.org>
Reviewed-on: https://review.coreboot.org/23845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
While programming interrupts, a message "perhaps this device was defined
wrong?" shows up twice. This is caused because some devices have
interrupt programmed for APIC mode, but not for non-APIC mode. Fix
mainboard_picr_data table by identifying devices programmed with value
0x1F while programmed differently on mainboard_intr_data table. Do so
only for devices that are used by kahlee or interrupt required by old OS.
BUG=b:70788755
TEST=Build and run kahlee, Verify that message disappears from serial
output.
Change-Id: Ic285036290519ed3ee617dffa616bd26c61575c5
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This commit uses newly defined macros to make it easier to read which
iomux function pads are being configured to use.
TEST=Booted grunt, confirmed display backlight came on.
BUG=b:72875858
Change-Id: I24e5091fc7ef696f8e9c932ce04664e6cc3ccb90
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/23830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There's no need to set the output enable here; this is already handled
by the native function. I'm making this correction in this change to
prevent the GPIO pin descriptions from getting confusing.
BUG=b:72875858
TEST=Booted, confirmed S5_MUX_CTRL high with and without this change.
Change-Id: I9e047be7169586c59892ef2bdab915683feeebda
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/23829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Turn on PCH iSCLK for meowth platform.
BUG=None
TEST=Boot up into OS and check register programming with iotools, the
command is iotools mmio_read32 0xfdad8000, returned value is 0x03.
Change-Id: I1e44e3748c9b37c8f60adcc47a866d445d77cfaa
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/23368
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EC builds for nyan_big, peach_pit, and smaug (ryu) have been removed
from the latest EC codebase, so don't try to build them by default
anymore.
Change-Id: I53901b32753c5b9b050f517bbf3f10b9071913d4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/23826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For variants that have a cr50 tpm, this enables faster polling when
interacting with the tpm.
BUG=b:72838769
BRANCH=none
TEST=verified on grunt that irq is used and not timeouts for tpm
Change-Id: I5786d334b6c1cc70f4c7107c75b07a7e27ac4428
Signed-off-by: Chris Ching <chingcodes@chromium.org>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/23626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds the Pmax setting in device tree. The Pmax is from
MAX(PL4_sku1, PL4_sku2, ..) + ROPmax. Given ROPmax is 30W and
the maximum PL4 is from U42, hence the Pmax = 71W + 30W = 101W.
BUG=b:72138778
BRANCH=None
TEST=USE=fw_debug emerge-nami chromeos-mrc coreboot chromeos-bootimage
& ensure the Pmax value is passed to FSP-S.
Change-Id: Ief6a134dc5b6bd2b8e07b4a44450e99ff26402d9
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/23640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
AmdInitPost returns AGESA_WARNING. This is because AGESA by default
enables bank interleaving, while the HW does not meet the requirements
for it. Disable bank interleaving, thus clearing AGESA_WARNING.
BUG=b:73118857
TEST= Build and run kahlee. Search for "agesawrapper_amdinitpost()
returned AGESA_SUCCESS".
Change-Id: Ice9270f9b10051dbb622344919223cf5439f5d7b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Based on the pictures at http://www.fit-pc.com/web/products/intense-pc/,
the Intense PC does not look like a laptop. In its documentation it is
described as "mini-PC" or "Single Board Computer".
This patches moves the Intense-PC into the correct category on the
Supported Motherboards page.
Due to thermal considerations, I have not removed the "select
SYSTEM_TYPE_LAPTOP" in Kconfig.
Fixes: de7f8d3a19 ("mainboard/compulab: add support for CompuLab Intense-PC")
Change-Id: I4343306a2f82eed8211981cbd3b084f5d112d30b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
... and fix them in the process.
The Kconfig help text seems to be a slightly better place for such
documentation than a comment in Kconfig.
Change-Id: I4114e17ad9c486a9de059040b0e2821540c31aad
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Fizz fails to show pictures on a type-c monitor because VBIOS runs
before DisplayPort link is ready.
With this patch, when firmware needs to display something, Fizz calls
google_chromeec_wait_for_display to make sure display is ready.
The penalty is up to 2 sec per boot in dev and rec boot. Normal boot
won't affected unless there is EC update.
BUG=b:72387533
BRANCH=none
TEST=Verify screens are displayed on Fizz as follows:
1. Put DUT in normal mode
2. Flash EC image to trigger EC sync (critical update)
3. Trigger manual recovery (insert)
4. Hit ctrl+d to switch to dev mode (to-dev)
5. Confirm to reboot (dev warning)
6. Warm reboot (dev warning)
7. Cold reboot (dev warning)
8. Flash EC image to trigger EC sync (critical update)
9. Trigger manual recovery (insert)
Change-Id: I90befe94f93e13904987acda50b2598d034b0031
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This makes the flow for GPIO initialization more closely follow that
what is performed for other boards so that it's easier to read the flow
(and stops relying on BS_WRITE_TABLES).
BUG=b:72875858
TEST=Built and booted grunt, built gardenia.
Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/23679
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Soraka, Poppy & Nautilus are designed to operate at max power of
45 Watt. Hence set psys_max to 45W.
BUG=b:66066340
BRANCH=None
TEST=Build and boot soraka.
Change-Id: If6f624733830b462329b5f539c20e2aea664143e
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/23757
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
The board does no support eMMC so no need to configure it.
Change-Id: If29009a09f39484b1da16fb650b4f9cbee2a6d19
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/23739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The board does not have memory down, only 2 DDR4 Slots.
Change-Id: I70eda83fbce7a707da170c7e555ed1a6dc6b1f4a
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/23738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Enable the micro-controller interrupt line as a real IRQ.
BUG=b:71986991
BRANCH=none
TEST=on Meowth, run 'ectool --name=cros_fp fpmode capture' and see the
number of interrupts incrementing and the MKBP event happening.
Change-Id: Ic0cf03d2a3508148b6482a5a595eaa213eff52c7
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://review.coreboot.org/23769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Turns out the write-protect GPIO polarity for Scarlet is different than
for Kevin/Gru, and nobody ever told us. Also, it must not be configured
with an internal pull-up or we'll not read the correct value. This patch
fixes both issues.
BRANCH=scarlet
BUG=b:73356326
TEST=Booted Scarlet, confirmed that crossystem wpsw_boot returns the
right value in all cases.
Change-Id: Idd348ecdf9da8fff7201b83e869ba097b8570f32
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change enables DPTF and configures the policy. DPTF parameters were
provided by internal power team.
BUG=b:67877437
BRANCH=master
TEST=emerge-nautilus coreboot
Change-Id: I31b31d5282ab38278bc68045ce75fdc6192f1144
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/23731
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Read cse file was not getting cached and taking about 500ms on every boot.
Change-Id: I8c92eefc64fe146c628d9c104d7dfb016204004c
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/23743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Show mainboard version in the console log so that one can easily see it.
Change-Id: I33bae8b340fce13c0cbe525521828929038b069a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/23750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The I/O expander on the mc_bdx1 is used to get the hardware version of
the mainboard. This patch enables the chip driver for the I/O expander.
Change-Id: I98c667fe4dccf0698ab4cb5ede6082f020c70ec6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/23749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
