The PIC and APIC IRQ routing tables are pre-populated with PIRQ_NC in
init_tables(), so the fch_pirq table entries where both IRQ numbers are
set to fch_pirq are redundant and can be removed.
Change-Id: I0d9b4f25e12a66cf86d1ad541955c3d2fe336c5a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Files are both identical and common for both SoCs.
Change-Id: I54b78108d342a0fd03bf70ffe6a09695c5678eb4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42545
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support for SW CM. Add Operating System Capabilities
(_OSC) method to enable USB/DisplayPort/Inter-domain USB4 Internet
Protocol tunneling and enable PCIe tunneling as well. Remove Connect
Topology(CNTP) command because kernel driver directly works with SW CM
Thunderbolt firmware. Update _DSD method for USB4 support across XHCI
and PCIe root ports.
BUG=b:140645231
TEST=Check Type C device all ports connection/enumeration with SW CM.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I859c5075882e40d7be30d4ba88cc825886712b74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We don't use these on zork, so lets save the power.
BUG=b:153001807
TEST=Boot OS and make sure UART 1, 2 and 3 are not probed and remain
powered off.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2fadeba779b66ec2fb13951b9487118ef0737a94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Rename dptf.asl to dptf_common.asl under soc/intel/common/acpi path
to avoid any kind of confusion with another dptf.asl file under
soc/intel/common/acpi/dptf path. Sometime it's confusing to have
two dptf.asl files just one directory apart.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I23d93719e23c0b7659ccb23e5d0868f879bc162c
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms
and update volteer speficic dsdt.asl file accordingly. The Linux kernel
driver expects these new acpi device ids for dptf functionalities.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move uart_platform_base and uart_platform_refclk to their own
compilation unit to avoid preprocessor usage. The newly created
compilation unit is only added to the build when PICASSO_CONSOLE_UART
is selected.
Change-Id: I56911addc8c000a0772156e5166720867cdd26fe
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42517
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCIe platform descriptors passed to Picasso FSP should use fixed width fields.
BUG=b:153681134
TEST=Boot system and suspend/resume. All PCIe devices train succesfully.
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Change-Id: If2a34be895db2c19c8830f5888cb99e43ad21b73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42519
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kconfig 4.17 started using the $(..) syntax for environment variable
expansion while we want to keep expansion to the build system.
Older Kconfig versions (like ours) simply drop the escapes, not
changing the behavior.
While we could let Kconfig expand some of the variables, that only
splits the handling in two places, making debugging harder and
potentially messing with reproducible builds (e.g. when paths end up
in configs), so escape them all.
Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
The APU2 was using the soc/amd/common functions to do GPIO reads and
writes. The functions that were being used are getting eliminated in
the SOC directory, but since the APU isn't using the rest of that code
(as it's not using the rest of the SOC codebase), it proved to be
problematic to use the updated functions.
The solution I've put in place here is to pull everything needed for the
GPIO reads & writes into the gpio_ftns.c & h files.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ied39c114bdf3637977d21f56fd7db428c52e4706
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
This decouples the linear framebuffer type from the symbols needing it.
Change-Id: I733e630e0aa2fb2947d079caef26253ce443fe91
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If we are not using the UARTs or they don't have the correct GPIOs
configured we should let the mainboard disable them.
BUG=b:153001807
TEST=Dump SSDT and see UART device is disabled
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifc04e36e0ebe5cce4b6cc228c7174dc76f2ffa4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The option to have amdfw outside of CBFS used dd to write amdfw at a
given location overwriting anything that was there before, which may
cause the build to fail due to the FMAP header being overwritten
resulting in a not too obvious error that the image is a legacy image
without FMAP header.
Mandolin was the only board using this functionality, but I fixed the
placement of components in the flash image there, so that amdfw can just
be placed in CBFS avoiding those problems.
Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With RELOCATABLE_RAMSTAGE the backing up of low memory
on S3 resume path was dropped. We forgot some things
behind.
Change-Id: I674f23dade0095e64619af0ae81e23368b1ee471
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
For baytrail and braswell, explicitly initialise
it to ACTIVE_ECFW_RO without ChromeEC.
For broadwell and skylake, fix it to report actual
google_ec_running_ro() status.
Change-Id: I30236c41c9261fd9f8565e1c5fdbfe6f46114e28
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42389
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings (~36 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~25 ms for an extra overhead of ~1KiB.
LZ4 Compression:
fsps.bin 0xe6fc0 fsp 254262 LZ4 (290816 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 712,361 (1,072)
18:finished LZ4 decompress (ignore for x86) 750,695 (38,334)
LZMA Compression:
fsps.bin 0xe6fc0 fsp 253415 LZMA (290816 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 707,696 (1,150)
16:finished LZMA decompress (ignore for x86) 767,763 (60,067)
BUG=b:158034451
TEST=Build and boot volteer mainboard.
Change-Id: I91e33eb7b688b5383f3a0075a28ac21250314973
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42444
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings(~60 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~50 ms for an extra overhead of ~1.5 KiB.
LZ4 Compression:
fsps.bin 0xa9fc0 fsp 203423 LZ4 (262144 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 433,550 (1,154)
18:finished LZ4 decompress (ignore for x86) 461,620 (28,069)
LZMA Compression:
fsps.bin 0xa9fc0 fsp 202132 LZMA (262144 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 478,448 (1,174)
16:finished LZMA decompress (ignore for x86) 557,725 (79,277)
BUG=b:158034451
TEST=Build and boot waddledoo mainboard.
Change-Id: I416b1d91d7f4836b1e9c641b0fe07b39876364ba
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use LZMA compression technique to compress FSP-S. This provides some
SPI ROM space savings(~27 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZMA is chosen over LZ4 since it provides extra space
savings of ~1 KiB for the decompression overhead of ~7 ms.
LZMA Compression:
fsps.bin 0xd1fc0 fsp 190132 LZMA (217088 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 343,289 (417)
16:finished LZMA decompress (ignore for x86) 373,922 (30,632)
LZ4 Compression:
fsps.bin 0xd1fc0 fsp 191310 LZ4 (217088 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 345,676 (581)
18:finished LZ4 decompress (ignore for x86) 369,101 (23,424)
BUG=b:158034451
TEST=Build and boot helios mainboard.
Change-Id: Ic0d0d81c81eaa365f3dbfdd2e00ac76cea287387
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42446
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasper Lake has been using the incorrect MemInfoHob header. Updating
the header to align it with Jasper Lake MRC code.
BUG=b:158722318
TEST=Verify memory info is populated for channnel 0 and 1 on wadddledoo.
Change-Id: Icca3e3b4cda9ca257f3b725823facf52ceec37b7
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Upcoming variant boards will use 16 MiB SPI ROM. So add support for 16
MiB flash map descriptor.
BUG=b:155107866,b:152981693
TEST=Build different variant boards. Ensure that waddledoo which is using
32 MiB SPI ROM boots.
Cq-Depend: chrome-internal:3107306
Change-Id: I8a6868da3280a662ff3a30623804ff135e6cbfbc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove unused cannonlake dptf.asl file and cleanup defines from apollolake
dptf.asl file as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on the system
Change-Id: I4c8bf2bd5da9d5881e7690bff34816b19dd96072
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove cannonlake dptf.asl include file from all the dsdt files
as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on the system
Change-Id: I961a3ecb27e7bb7bb0b98c8630900bada0531639
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make dptf acpi device ids configurable for thermal functionality
as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I5161d19dc663cdb9a7b004bb681059c9af2aaf4f
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It is the reference board of TGL-Y platform, we want to disable EC SW
sync for Proto stage, it would be re-enabled before EVT stage.
BUG=b:156435028
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ie7999e24e9c173d4870b35ce1728f3dcc8dcac29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42090
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Group entries by categories, and sort the groups alphabetically. Also,
separate different mainboard vendors with two extra spaces for clarity.
Change-Id: I43df8c24a40433357760827777497cbac4b6a919
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix last legacy ASL syntax match in acpi/pcr.asl
BUG=none
TEST=Deltan coreboot binary remains the same after the changes are
applied
Signed-off-by: Alexey Buyanov <alexey.buyanov@intel.com>
Change-Id: Ia1021851b42b8fad52b3197d9003056d3dd2db04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42437
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the name of these variables to 'allowlist'.
Change-Id: I9d5553988a1c9972b8f1ebaeee20878b23a8aa9b
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42316
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
Change-Id: I599995b3ed5c4dfd578c87067fe8bfc8c75b9d43
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit d5f1e0f973.
Reason for revert: FSP-S is now fixed to not touch the SPI
configuration registers. Thus, coreboot does not need to reconfigure
SPI after FSP-S has run.
BUG=b:153506142
TEST=Verified that SPI configuration registers look the same before
and after FSP-S has run. em100 works fine without any additional
changes in coreboot to reconfigure SPI.
Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If a UCSI event comes in when the EC is in S0ix mode then the kernel
driver attempts a transaction but fails and this can leave the system
in an unexpected state where the only wake source is the power button.
This change will not notify the UCSI driver if the EC is in S0ix mode
and instead keep track of the event and send it on resume.
BUG=b:157923800
TEST=tested on drallion system:
1. Put drallion system into suspend
2. Attach power supply
3. Ensure the system can wake with keypress
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I43acb089385d9b41ac955f053e409daad67423f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Temporary workaround for S0ix issues related to FSP's handling of 0 value.
When IomTypeCPortPadCfg is 0 FSP completely skips any flow related to this
value which seems to be causing issues with s0ix.
This is still being debugged and a final solution will be made when available
BUG=b:159151238
TEST=flash image with workaround to volteer and verify that s0ix
cycles correctly.
Change-Id: Id79dd1c49958389cdb666b3760abd821bc1973a8
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42268
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PICASSO_UART Kconfig option is about using the internal MMIO UART
controllers in Picasso for console, so rename it to PICASSO_CONSOLE_UART
Change-Id: I38ac9ee96af826fe49307b4d0e055a43fcbd4334
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change includes uart.c in bootblock, romstage, ramstage and
verstage unconditionally because this file is handling more than just
the UART console configuration. This allows boards to take advantage
of picasso_uart_mmio_ops even if PICASSO_UART is not selected.
uart_platform_base and uart_platform_refclk mustn't be provided if
PICASSO_UART is unset, so add an #if around those functions.
BUG=b:158346697
TEST=Mandolin builds again.
Change-Id: If1173034b0d2ed32f77241768e1e8abb208aac3a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42339
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In its current state, it draws more dependencies in than it solves
which makes it useless.
Change-Id: I08f592731c3da2ac19e1f93682256f559a067fc4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch adds support for enabling/disabling PCIe hot-plug via
a chip config option PcieRpHotPlug, which is copied to the corresponding
FSP-S UPD.
BUG=b:156879564
BRANCH=none
TEST=Boot Volteer/RVP with FSP log and check hotplug enabled/disabled
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4c0187644b6ca9735f1b159e110e3466af14ff71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41794
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the introduced functions and verify pointers in the SMMSTORE.
Make sure to not overwrite or leak data from SMM and update the
documentation as well.
Change-Id: I70df08657c3fa0f98917742d8e1a6cb1077e3758
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41085
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Felix Held