LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition.
Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0.
BUG=b:155955302
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] are set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
This is used for 'KHz' (line #19)
Change-Id: I4d610607b50d2fac1150deaaf94f3cb331540fbc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
C-State latency table was exposed by both intel-idle driver and
BIOS/coreboot. And table in Kernel was used before.
After kernel patch (https://patchwork.kernel.org/patch/11290319/),
only BIOS/coreboot exposes C-State latency table through _CST.
As current C-State latency table info is not correct for Tigerlake,
update proper info according to BWG and reference code.
- Update latency: CpuPowerMgmt.h
Use BIOS reference code as values in BWG is not up-to-dated
- Remove MSR program for latency: BWG 4.6.4.3.4
Reference:
- TGL BWG #611569 Rev 0.7.6
- https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/
ClientOneSiliconPkg/Cpu/Include/CpuPowerMgmt.h
BUG=b:155223704
BRANCH=None
TEST=Boot to OS and check C-State latency
expected result
>cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency}
POLL
C1_ACPI
C2_ACPI
C3_ACPI
0
1
253
1048
For detail, refer Bug info.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8bf2976ad35b4cf6f637a99c26b4f98f9f6ee563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
SMI handler was not present in jasperlake rvp to handle wake events
when platform goes to sleep or shutdown or s0ix.
Adding this support for board which supports chromeec.
BUG=None
BRANCH=None
TEST=Check wake event on board and platform wakes up due to events
lid wake event or power button press.
Change-Id: I8e35955b06d6efaf9275ec03f519c9bcaa9ba345
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
anx7625 enables MIPI receiver to check EOTP packet as default.
If MIPI_DSI_MODE_EOT_PACKET is not set in flags, soc dsi will not
send out EOTP packet and some panel models will display abnormal
such as scrolling all the time.
BUG=b:144824303
BRANCH=kukui
TEST=boot damu board, edp panel with anx7625 as bridge boots up
without scrolling.
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Change-Id: Iad651202bde2a40024af8c12153143ada2ce2439
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41161
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ia48f20ca8c21d3c645c5566c189dddf2f8bc0308
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40966
Reviewed-by: Anjaneya "Reddy" Chagam <anjaneya.chagam@intel.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Bryant Ou <bryant.ou.q@gmail.com>
Reviewed-by: Johnny Lin
Reviewed-by: Morgan Jang
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CB:41106 revealed that mb/intel/cedarisland already sets FSP-S UPD (see
CB:40735) while the required includes are still missing in CPX. Buildbot
did not fail because `ramstage.c` never was (implicitly) included.
Fix this problem by making SKX/CPX share a common ramstage header for
now by moving the one from SKX.
Test: Build cedarisland_crb
Change-Id: I9cd25edd167ec71ee98c7ffa4fa6f95ca73a75e9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
This enables adding ACPI objects at run-time for SD Card and EMMC
devices.
BUG=b:150872580
TEST=Build and boot the mainboard. Observe ACPI objects like card detect
gpio are added to the SSDT.
Change-Id: I754aee3b0fd343994bd06d9c28e038f651009d6d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
On Apollo Lake/Gemini Lake platforms, FSP requires more than a
simple RW_MRC_CACHE; without the RECOVERY and VAR cache regions,
FSP-m will fail on s3 resume and trigger a full reset instead.
This fixes the default.fmd for octopus to match that used for reef.
Test: build/boot google/ampton, verify sleep/resume works under Linux
with 5.x kernel.
Change-Id: I8565aa93256df7d6e0b359d70e9305f34e5ccb60
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Send end of post message to CSME in FSP, by selecting EndOfPost
message in PEI phase. In API mode which coreboot currently uses,
sending EndOfPost message in DXE phase is not applicable.
Change-Id: Ie21dcfc84d331f036090d01ea3e3925b81eea902
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
gpio70 is assigned to use as WLAN rst in new schematic to fulfill
RTK RTL8822CE power sequence:
WLAN rst will need to be active at least 50ms after WLAN power on.
Also in order to keep the rst low in consistency, override default
gpio70 to low.
BUG=b:154357210,b:154848243
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I98c8afe42b7f92016f83483acbb3b9ae64b159f7
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40805
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
touchpad & touchscreen power enable gets reset during resume causing
unintended wake interrupts, causing dark resume failures. This
prevents the board from being shut down after it's been suspended
for a long period of time and can end up draining the battery.
BUG=b:153173717
TEST=Build only - Needs to be tested by ODMs.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: If403da8853e59eaaf589062c9bd6f10deb626998
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
We have the git history which is a more reliable librarian.
Change-Id: Idbcc5ceeb33804204e56d62491cb58146f7c9f37
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
vboot_recovery_mode_enabled() was recently changed to assert() when it
is called before vboot logic has run, because we cannot determine
whether we're going to be in recovery mode at that point and we wanted
to flush out existing uses that pretended that we could. Turns out there
are a bunch of uses like that, and there is some code that is shared
across configurations that can and those that can't.
This patch cleans them up to either remove checks that cannot return
true, or add explicit Kconfig guards to clarify that the code is shared.
This means that using a separate recovery MRC cache is no longer
supported on boards that use VBOOT_STARTS_IN_ROMSTAGE (this has already
been broken with CB:38780, but with this patch those boards will boot
again using their normal MRC caches rather than just die). Skipping the
MRC cache and always regenerating from scratch in recovery mode is
likewise no longer supported for VBOOT_STARTS_IN_ROMSTAGE.
For FSP1.1 boards, none of them support VBOOT_STARTS_IN_BOOTBLOCK and
that is unlikely to change in the future so we will just hardcode that
fact in Kconfig (otherwise, fsp1.1 raminit would also have to be fixed
to work around this issue).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I31bfc7663724fdacab9955224dcaf650d1ec1c3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add inline function to check if two regions overlap.
Change-Id: I6f3dfaa9f0805893bd691ba64f112944d89a8e71
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The backslash on the very last line is not needed and causes an iasl
warning.
Change-Id: I27e78bc34b9386dd014db5880a104693b4f0db5a
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41094
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch improves the response buffer handling for TPM 2.0. Previously
we would allow any command to return no payload, but if there was a
payload we would always try to unmarshal it according to the normal
success response. This was sort of relying on the fact that the TPM
usually returns no additional data after the header for error responses,
but in practice that is not always true. It also means that commands
without a response payload accidentally work by default even though we
did not explicitly add unmarshallig support for them, which seems
undesirable. Adding explicit unmarshalling support for TPM2_SelfTest
which was only supported through this loophole before.
This patch changes the behavior to always accept any amount of payload
data for error responses but not unmarshal any of it. None of our use
cases actually care about payload data for errors, so it seems safer to
not even try to interpret it. For success responses, on the other hand,
we always require support for the command to be explicitly added.
This fixes a problem with the Cr50 GET_BOOT_MODE command where an error
response would only return the subcommand code but no data after that.
Also add support for a second, slightly different NO_SUCH_COMMAND error
code that was added in Cr50 recently.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ib85032d85482d5484180be6fd105f2467f393cd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41100
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates memranges_find_entry() to break and return early
if the end address of the hole within the current range entry crosses
the requested limit. This is because all range entries and maintained
in increasing order and so none of the following range entries can
satisfy the given request.
Change-Id: I14e03946ddbbb5d254b23e9a9917da42960313a6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change updates the comment for memranges_next_entry() to indicate
that the limit provided by the caller is inclusive.
Change-Id: Id40263efcb9417ed31c130996e56c30dbbc82e02
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We use a temporary BAR value to program the thermal settings. To make
this more obvious, factor it out.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: Icda6e4100d954fe28d2624270b5d7ab7ed155e32
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Make the code follow the coding style, and reflow things that fit in 96
characters.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: I6e0acdc9c21d4b416597dc776bd9abab12bff4a0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Looks like someone couldn't decide between `enter` and `entry`.
According to ME documentation, it should be the latter, so fix it.
Change-Id: I971fb667264be97cdffa2b2b0e155f5dcacdaab7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Similar to bootblock, provide declaration for
verstage_mainboard_early_init() to support early mainboard
initialization if verstage is run before bootblock.
BUG=b:155824234
TEST=Verified that trembyle still builds
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I106213ecc1c44100f1f74071189518563ac08121
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Literally nobody else uses it and it does nothing.
Change-Id: I7e6466137b5069a7f785972205bd43f3cb25d378
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41112
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kenneth Chan