Test that the coreboot toolchain version of IASL is being used by
looking for the string 'coreboot toolchain' instead of a specific
version number. While this may cause people to have to rebuild
their toolchains again now, it helps to prevent toolchain failures
when bisecting in the future.
Change-Id: I9913eeae8f29ddc3ec8c70077c05d898595eb283
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12847
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The what-jenkins-does build runs distclean when building the utilities.
It doesn't fail the build if distclean fails, but it generates a
scary warning.
Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of keeping track of all the combinations of entry points
depending on the stage and other options just use _start. That way,
there's no need to update the arch/header.ld for complicated cases
as _start is always the entry point for a stage.
Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13882
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
In order to align the entry points for the various stages
on x86 to _start one needs to rename the reset_vector symbol.
The section is the same; it's just a symbol change.
Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13881
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Until recently x86 romstage used to be linked at some default
address. The address itself is not meaningful because the code
was normally relocated at address calculated during insertion
in CBFS. Since some newer SoC run romstage at CAR it became
useful to link romstage code at some address in CAR and avoid
relocation during build/run time altogether.
Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13860
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to avoid collisions with other _start symbols while
grepping and future ones be explicit about which _start this
one is: the 16-bit one only used by the reset vector in the
bootblock.
Change-Id: I6d7580596c0e6602a87fb158633ce9d45910cec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13880
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
It's helpful to see the reset vector in objdump output. Without
it being marked executable it doesn't get displayed.
Change-Id: I85cb72ea0727d3f3c2186ae20b9c5cfe5d23aeed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13879
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Patrick at least indicated this jump after the reset
vector jump was a remnant from some construct used long
ago in the project. It's not longer used (nor could I find
where it was). Therefore, remove it.
Change-Id: I31512c66a9144267739b08d5f9659c4fcde1b794
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13878
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
This adds a set of utility functions that help load and identify
FSP blobs.
Change-Id: I1d23f60fd1dc8de7966142bcd793289220a1fa5e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13797
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This adds important header files that specify calling interface between
coreboot and FSP.
Change-Id: I393601c91e3c3f630e0fc899f1140ecefed8ecba
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In Kconfig files, the 'if' and 'endif' statements need to match up. A
file can't start an if statement that's completed in the next file.
Add a check as the files are being parsed to make sure that they match
up correctly.
Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Parse manufacturer id and ASCII serial.
Required for SMBIOS type 17 field.
Change-Id: I710de1a6822e4777c359d0bfecc6113cb2a5ed8e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13862
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
1. Change the function which integrated one firmware, to the function
which pushes the whole group. Use fw_table as a parameter instead
of using the global table name.
2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2
can exist without PSP1. For some APU, the PSP directory has to be
put in PSP2 field (ROMSIG 0x14).
3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It
is tested, and it is true.
These above changes are overlapping, hard to split them. Sorry.
Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In e820entry struct, the members are defined using
standard types. This can lead to different structure size
when compiling on 32 bit vs. 64 bit environment. This in turn
will affect the size of the struct linux_params.
Using the fixed width types resolves this issue and ensures
that the size of the structures will have the same length
on both 32 and 64 bit systems.
Change-Id: I1869ff2090365731e79b34950446f1791a083d0f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
When linux is used as payload, the parameters to the kernel are build
when cbfstool includes bzImage into the image. Since not all
parameters are used, the unused will stay uninitialized.
There is a chance, that the uninitialized parameters contain
random values. That in turn can lead to early kernel panic.
To avoid it, initialize all parameters with 0 at the beginning.
The ones that are used will be set up as needed and the rest
will contain 0 for sure. This way, kernel can deal with the
provided parameter list the right way.
Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13874
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Numerous changes have gone in since the last bump, let's increase
the version.
Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Instead of hardcoding the maximum supported DDR frequency to
800Mhz (DDR3-1600), read the fuse bits that encode this information.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13487
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The code can't handle cyclic zero runs. Make sure it will never
wrap around by setting the top-most bit to constant one.
Fixes "Mini channel test failed (2)".
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
Change-Id: I55e610d984d564bd4675f9318dead6d6c1e288a3
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13853
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This should allow the builder to download the packages securely.
Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When writing to a logfile, the color codes just make things confusing.
The --nocolor option will allow these to not be printed.
Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot's top level Makefile does the same, so let's stay consistent.
Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current default of 6 lines leaves us with no context
about the actual error:
*** ERROR: 3 warnings encountered, and warnings are errors.
coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed
make[1]: *** [oldconfig] Error 1
make[1]: Leaving directory 'coreboot-gerrit'
Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Our GDB doesn't support RISC-V yet, so let's disable it for now
to keep the build from breaking.
Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
With this change you can say
$ make DEST=/opt/cross-1.35
to get all of the cross toolchain built and installed to /opt/cross-1.35
Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
qemu-power8 wants to tell about itself with XML, and so
we need to build gdb with EXPAT so it can understand XML.
Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Intel Speed Shift Technology is a new mechanism that replaces
Legacy P-state. ISST allows OS hints about energy/performance
preference. H/W performs the actual P-state control (autonomous)
1. Optimization frequency seclection for low residency workloads,
no longer a static knee point.
2. Optimized frequency selection for best energy to performance
trade offs.
3. Kick down frequency (from idle) fpr best responsiveness while
taking energy consumption init account.
Coreboot's responsiblity is to configure MSR 0x1AA ISST_EN bits
which will reflect in CPUID.06h:EAX[Bit 7] that driver checkes
and enable HWP accordingly.
BUG=chrome-os-partner:47517
BRANCH=None
TEST=Booted kunimitsu and verify HWP getting enabled/disabled
using Intel P-state driver.
Change-Id: I91722aa1077f4ef6c8620b103be3e29cfcd974e5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: aa7d004cb2e19047e4434e3e2544cf69393ce28f
Original-Change-Id: Ie617da337babde7f196a7af712263e37f7eed56f
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313107
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: https://review.coreboot.org/13835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This dependency wasn't called out before, and when building with enough
threads, the build would fail due to a collision trying to build
build/util/kconfig/conf.
Fixes this failure:
make[1]: execvp: build/util/kconfig/conf: Permission denied
/home/martin/git/coreboot/util/kconfig/Makefile:40: recipe for target
'oldconfig' failed
make[1]: *** [oldconfig] Error 127
Makefile:167: recipe for target 'build/config.h' failed
Change-Id: Ib78d36bab0ba469796d89877bbe6a61e05196e87
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13859
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update the DPTF configuration for the chell mainboard:
1) Enable DPTF charger control, set max current to 1975mA
according to the battery specification.
2) Enable charger effect on charger temp sensor in TRT
3) Set PL2 to 15W which is the same value configured in the CPU.
BUG=chrome-os-partner:49859,chrome-os-partner:50306
BRANCH=glados
TEST=build and boot on chell
Change-Id: I644256b9596cc5295513c48f5e3a18e6ce8b0a6b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: c19740a227f932bf80e9243341ec81763779719c
Original-Change-Id: Icff5edc9d659bea6370ff8de1334ebf0983340da
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329187
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13842
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add new GPIOs for touchscreen enable and reset pins and define
the one missing unconnected pin for GPP_E10.
BUG=chrome-os-partner:50518
BRANCH=glados
TEST=build and boot on chell DVT1
Change-Id: I565a742ff266ee65a5d33f052606fe77c24b6ac8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 32a890af8c32aa30adac256d2c4ceaeefa30bd0d
Original-Change-Id: I16546d38cc4e926e169f61ae1843106d1e14936b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329297
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13841
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is used in coreboot-side vboot code now, to keep booting from
the same RW section after wakeup - necessary when romstage is in RW
and its use of the RAM init configuration cache may differ between
versions.
Change-Id: Ie531cf3ddc980154f48772b3ff87e23473010721
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/13844
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If a platform does verification of the memory init step, and it must
resume with the same slot that it booted from then it needs to set
the vboot context flag when resuming instead of booting. This will
affect the slot that is selected to verify and resume from.
BUG=chromium:577269
BRANCH=glados
TEST=manually tested on chell:
1) ensure that booting from slot A resumes from slot A.
2) ensure that booting from slot B resumes from slot B.
3) do RW update while booted from slot A (so the flags are set to try
slot B) and ensure that suspend/resume still functions properly using
current slot A.
4) do RW update while booted from slot B (so the flags are set to try
slot A) and ensure that suspend/resume still functions properly using
current slot B.
Change-Id: I77e6320e36b4d2cbc308cfb39f0d4999e3497be3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 4c84af7eae7b2a52a28cc3ef8a80649301215a68
Original-Change-Id: I395e5abaccd6f578111f242d1e85e28dced469ea
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328775
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The FBC hardware for skylake does not have access to the bios_reserved
range so it always assumes 8MB is used and so the kernel will
therefore need to avoid using the last 8MB of the stolen window.
With the default stolen size of 32MB(-8MB) there is not enough space
for FBC to work with a high resolution panel.
Kernel reference:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a9da512b3ed73045253afd778e40d4298f42905b
BUG=chrome-os-partner:50396
BRANCH=glados
TEST=build and boot on chell DVT
Change-Id: I3049d7d9e7c551aad5b8fd1630d5fbd88ccb2692
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: fff1f4b35e23e77cdc72c5bcc290f199494cdbbb
Original-Change-Id: If468cca5759a320f3cd2d7eb09f4bcc0117b24cb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328813
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of relying on power-on-reset values provide configuration
for all pads. PAD_CFG_NC() was used for all pads which had no nets
routed on the board. PAD_CFG_GPO(0) was used for pads which had nets
routed on the board in order to terminate them.
BUG=chrome-os-partner:50301
BRANCH=glados
TEST=Built and booted chell. Suspended and resumed on EVT.
Change-Id: I7960442d5c06f58a1b671cdefac71ef0bc3b0cd5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a167cd0a747402bfc3cc9b6fbaaceceda766ee9
Original-Change-Id: I519011b049235dc2a960939c0bed274252dbffa8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/327835
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13831
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enable the EHCI and OHCI controllers.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when at the UEFI shell prompt:
* After issuing:
* "connect -r"
* "map -r"
* The "dir" command displays the contents of the USB flash drive
* A USB keyboard can issue shell commands
* The "drivers" command shows an EHCI and OHCI connection
Change-Id: Iad9abced98d9b645e8b12fa0845c97260cf62a72
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13857
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Initialize the base addresses for:
* Power management control
* Power management status
* Reset
* Power management timer
* General-Purpose Event 0
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when:
* Register address are properly displayed by the payload
* "reset -c" performs a reset and reboots the system
* "reset -w" performs a reset and reboots the system
* "reset -s" performs a reset and turns off the power
Change-Id: I9d043f4906a067b2477650140210cfae4a7f8b79
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13764
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add more documentation on the features that the EDK-II
CorebootPayloadPkg is using. Add 8254 and 8259 documentation
links. Add EDK-II documentation links.
TEST=Boot CorebootPayloadPkg to shell prompt
Change-Id: I66df1be0ba908b51b5ddb44a8671b2d7bdb46493
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13851
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a link to the ACPI specification.
Update the FADT table to better describe the use and ACPI specification
reference for the various fields.
TEST=None
Change-Id: I77cd925800d71398be6d677de48874099ea26479
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13765
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Without this change it'll get a build error with crossgcc-x64
because $(AS) is "util/crossgcc/xgcc/bin/x86_64-elf-as --32",
and running $(LPAS) (i.e. AS=$(AS) lpas) will run "--32" instead of
"x86_64-elf-as".
Change-Id: I95e5630cb1d4f1ce81a8ca8a7bf338450b325f02
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/13845
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
I first found the missing of #include guards when I tried to include
both sandybridge/gma.h and sandybridge/sandybridge.h, but
sandybridge.h includes gma.h in it and gives a compile error.
Change-Id: I13fdb8014b82e6065be2064137b7ea10062deaca
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/13775
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This allows coreinfo to be added to CBFS as a 'secondary'
payload on x86 systems, to be loaded by the main payload
if desired.
Selecting this option, which defaults to no, builds the coreinfo
payload and adds it to CBFS as `img/coreinfo` which can then be
loaded by for example SeaBIOS or GRUB.
Change-Id: I52661d486823bc4bb215ce92dca118c9d2c2a309
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13728
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Users had to build nvramcui manually because payload.sh was only meant
for abuild. Now the user can build it with:
cd payloads/libpayload/ && make menuconfig && make && make install
cd ../nvramcui && make
Change-Id: I409a3c39a1e1738e8071febb1a3f169e1aee959a
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/13778
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet
v1.05.
Change-Id: I05c3c7877015d95eb8d512f7410604b9af043b26
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13807
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Improved version of
I1a115a45d5febf351d89721ece79eaf43f7ee8a0
The first version wasn't well tested due to the lack of hardware
and it was to aggressive.
With timC being direct function of timB's 6 LSBs it's critical to match
timC and timB.
Some tests increments the value of timB by a small value,
which might cause the 6bit value to overflow, if it's close
to 0x3F.
Increment the value by a small offset if it's likely
to overflow, to make sure it won't overflow while running
tests and bricks the system due to a non matching timC.
In comparission to the first attempt, only 4 out of 128 timB values
are considered bad.
Needs test on real hardware !
Fixes a "edge write discovery failed" on my test system.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Change-Id: If9abfc5f92e20a8f39c6f50cc709ca1cedf6827d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13714
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Martin Roth