This menu may become a bit more complicated with addition of
new USB hardware so move it out of console/.
Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5307
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Existing code compiled serial communication and printk() for SMM
even when DEBUG_SMI was not selected.
Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5142
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
NOTE: UART base for SMM continues to be broken, as it does not use
the address resource allocator has assigned.
Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5235
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Do not pull in console hw-specific prototypes everywhere
with console.h as those are not needed for higher levels.
Move prototypes for UARTs next to other consoles.
Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5232
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently this is only a minimal stub to get console on qemu-armv7.
Change-Id: I3f20b7f944bc7d0e5ace9d22198d4c16a3839d2c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5162
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
UART input clock is platform dependent. Also account for possible
use of get_option() where baudrate is not compile-time constant.
The hardware reference on BeagleBone is from a 48 MHz oscillator input.
With pre-divisor of 16 we get same register values as in table 19-25.
Change-Id: I89aee27c958f8618ce79a968ae7520a867e7e8a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5290
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
UART input clock is platform dependent. Also account for possible
use of get_option() where baudrate is not compile-time constant.
Change-Id: Ie1c8789ef72430e43fc33bfa9ffb9f5346762439
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5289
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Account for possible use of get_option() when baudrate is no longer
compile-time constant.
Change-Id: Ib45acd98e55c5892dbce9903830665aefeda5be0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5288
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We should not have pc80/ includes in console/.
Change-Id: Id7da732b1ea094be01f45f9dbb49142f4e78f095
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5157
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Divisor is a function of requested baudrate, platform-specific
reference clock and amount of oversampling done on the UART reference.
Calculate this parameter with divisor rounded to nearest integer.
When building without option_table or when there is no entry for
baud_rate, CONFIG_TTYS0_BAUD is used for default baudrate.
For OxPCIe use of 4 MHz for reference was arbitrary giving correct
divisor for 115200 but somewhat inaccurate for lower baudrates.
Actual hardware is 62500000 with 16 times oversampling.
FIXME: Field for baudrate in lb_tables is still incorrect.
Change-Id: I68539738469af780fadd3392263dd9b3d5964d2d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5229
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This option is used to make uart8250mem option visible in menuconfig.
Showing it for these ARMs is incorrect.
Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Do not guard the file by CONFIG_CONSOLE_SERIAL8250 or
CONFIG_CONSOLE_SERIAL8250MEM or CONFIG_CONSOLE_SERIAL.
Don't do indirect includes for <uart8250.h>.
The config-specific options are already properly guarded, and there
is no need to guard the register and bit definitions.
Change-Id: I7528b18cdc62bc5c22486f037e14002838a2176e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4585
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The miniPCIe ports hanging off 15.0 are infact x1, as are the two
onboard NIC's on 6.0 and 15.0.
Change-Id: I6247838f6b5823369543e338975a4c5c6fd00d7c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5328
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Provide ACPI table node so that the PS/2 keyboard/mouse port works
in GNU/Linux.
Change-Id: If73b8d37a81bb9066cbcc650b518d25e243b84e7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5327
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Old video init just replayed the sequence.
This one actually computes the values.
Change-Id: Ic1fe7a2e90dc2cc36ac0d8bcea5cfabc583f09a3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5270
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
SPI registers didnt change since ICH8. No need to have separate
files for them. Unify.
Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5254
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Without this memory decoding isn't activated which, in turn,
makes SeaBIOS crash.
Change-Id: I3dcc721b500ab7468e1082157eeeed38044462d0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5326
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
No one is interrogating the write_tables() return value. Therefore,
drop it.
Change-Id: I97e707f071942239c9a0fa0914af3679ee7a9c3c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5301
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Not really used and conflicts with SSKPD from i915_regs.h
Change-Id: I1462457f656310df99e78aee8cbfe0206f6e2a1e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5268
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Usefull to select between text mode which offers best compatibility with
payloads and gfx mode which makes the best-looking screen.
Also right now we have an unfortunate situation when qemu is in gfx mode
while most real systems use text mode.
Change-Id: Ifad7ba197875edfdd06eb932afeb5800229ef055
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5282
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
s_srcaddr is uninitialized in the BSS section, leading to a
garbage valued operand on the LHS of a '<' on line 383.
Change-Id: Ie4fec91b09c70fb1d91ad3918ac3f60653fa1d83
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5314
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The get_lb_mem() is no longer used. Therefore, remove it.
Change-Id: I2d8427c460cfbb2b7a9870dfd54f4a75738cfb88
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5304
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Instead of packing and unpacking entries in lb_mem use
the bootmem infrastructure for performing sanity checks
during payload loading.
Change-Id: Ica2bee7ebb0f6bf9ded31deac8cb700aa387bc7a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5303
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The write_coreboot_table() in coreboot_table.c was already using
struct memrange for managing and building up the entries that
eventually go into the lb_memory table. Abstract that concept
out to a bootmem memory map. The bootmem concept can then be
used as a basis for loading payloads, for example.
Change-Id: I7edbbca6bbd0568f658fde39ca93b126cab88367
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5302
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Clock generator is mobo-specific. Don't touch it in raminit.
Change-Id: Ie114696b7fb13b8daee8dd1393d43bc609e149b3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5265
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The selfboot() function relied on global variables
within the selfboot.c compilation unit. Now that the
bounce buffer is a part of struct payload use a new
architecture-specific arch_payload_run() function
for jumping to the payload. selfboot() can then be
removed.
Change-Id: Icec74942e94599542148561b3311ce5096ac5ea5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5300
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In order to break the dependency on selfboot for jumping to
payload the bounce buffer location needs to be communicated.
Therefore, add the bounce buffer to struct payload.
Change-Id: I9d9396e5c5bfba7a63940227ee0bdce6cba39578
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5299
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In order to encapsulate more data for self loading use struct
payload as the type. That way modifications to what is needed
for payload loading does not introduce more global variables.
Change-Id: I5b8facd7881e397ca7de1c04cec747fc1dce2d5f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5298
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The selfboot() routine was perfoming most of the common teardown
and stack checking infrastructure. Move that code into
payload_run() to prepare removal of the selfboot() function.
Change-Id: I29f2a5cfcc692f7a0fe2656cb1cda18158c49c6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5297
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
A payload can be loaded either from a vboot region or from cbfs.
Provide a common place for choosing where the payload is loaded
from. Additionally, place the logic in the 'loaders' directory
similarly to the ramstage loader infrastructure.
Change-Id: I6b0034ea5ebd04a3d058151819ac77a126a6bfe2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5296
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
A comparison with a two's complement in gcccar.inc has dubious
GAS/AT&T notation. Clang miss-parses 0x-1 as an invalid hexadecimal
number.
Change-Id: I88baa5c2513f062ff309df05916a3832b9bd9bb1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5277
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Remove a bunch of dead code which depends either on commented out
#defines, or compiler definitions. Use this opportunity to remove the
need for "-D_7ZIP_ST" in the compiler flags.
Change-Id: Ib6629002be7bf4cee6d95d7baa724893b5e8ba32
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5083
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The PCI ids are taken from:
Intel® 6 Series Chipset and
Intel® C200 Series Chipset
Specification Update – NDA
October 2013
CDI / IBP#: 440377
Change-Id: Ib8418173fd36fd4109b3c4ec0d5543ca8e39ffa6
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5226
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Rather than having it inside mainboard_enable.
Change-Id: Ie8bd25eb49b919b4e25c4628e3557fc66b2ba4d9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4840
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
There are five firmware regions that are (currently) defined. This
was assumed throughout the ifdtool code with many literal 4s and
5s. This patch changes them to refer to a new #define NUM_REGIONS.
Change-Id: I523d3763942f875025ebc4b9ba8b2ccf1db5b2f5
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5313
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The new option "--newlayout <file>" will read <file> in flashrom's
layout format and copy flash regions from the current flash image
file to a new flash image file.
If a region grows, the padding is added at the beginning of the target
region in the new file so that the data is "right-aligned" to the
end of the region.
If a region shrinks, a warning is given and the tail end of existing
data is copied to the target region in the new file.
Regions of zero or negative size are ignored. (In the example below
00fff000:00000fff regions are an artifact of the address encoding
in the register fields.)
Example Usage:
Given a flash image for a board with a Sandy Bridge processor and
Intel 6-Series chipset in the file vpx7654.bin
ifdtool --layout layout.txt vpx7564.bin
will yield the file layout.txt:
00000000:00000fff fd
00180000:003fffff bios
00001000:0017ffff me
00fff000:00000fff gbe
00fff000:00000fff pd
Notice that the "bios" portion extends to the end of the 4MB flash.
It may be edited to extend the bios portion to consume to the extent
of an 8MB flash. like layout2.txt:
00000000:00000fff fd
00180000:007fffff bios
00001000:0017ffff me
00fff000:00000fff gbe
00fff000:00000fff pd
ifdtool --newlayout layout.txt vpx7654.bin
will create a file vpx7654.bin.new that is 8MB.
Change-Id: I0e0925a725c40fa44d8c4b6e86552028779d0523
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5312
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Dump the Intel Flash Descriptor map in the format expected
by flashrom's "layout" option.
Example usage:
Given a 4MB flash image vpx7654.bin that was generated by Intel's
FITC tool for a 6-Series chipset...
./ifdtool --layout l.txt vpx7654.bin
cat l.txt
00000000:00000fff fd
00180000:003fffff bios
00001000:0017ffff me
00fff000:00000fff gbe
00fff000:00000fff pd
Change-Id: Ib740178ed6935b5f6e1dba1be674303f9f980429
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5306
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The same sequence is used regardless of the port
being read or written. Therefore, use the same
implementation for reading or writing to a port.
BUG=None
BRANCH=None
TEST=Built and booted through depthcharge. Dev and recovery
screens still work. Nothing bizarre in console output.
Change-Id: I1a64b54b50472fa7d601e199653eb4a76accf910
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175441
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4922
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Kyösti Mälkki