`cbfstool locate` and the associated -T switch were removed a looong
time ago (2015 in CB:11671). However, getopt and the help text weren't
cleaned up correctly. Fix that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ib098278d68df65d348528fbfd2496b5737ca6246
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The whole point of moving do_cbfs_locate() later (CB:59877) was that it
could use the file size that is actually going to be inserted into CBFS,
rather than the on-disk file size. Unfortunately, after all that work I
forgot to actually make it do that. This patch fixes that.
Since there is no more use case for do_cbfs_locate() having to figure
out the file size on its own, and that generally seems to be a bad idea
(as the original issue shows), also remove that part of it completely
and make the data_size parameter mandatory.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1af35e8e388f78aae3593c029afcfb4e510d2b8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The second generation EFS (offset 0x24[0]=0) uses "binary relative"
offsets and not "x86 physical MMIO address" like gen1.
The field additional_info in table header can tell if the absolute or
relative address is used.
Chips like Cezanne can run in both cases, so no problem
comes up so far.
The related change in psp_verstage has been uploaded.
https://review.coreboot.org/c/coreboot/+/58316
The relative mode is the mode 1 of four address modes. The absolute
mode is the mode 0. Later we will implement mode 2. Not sure if mode 3
is needed.
It needs to be simple to work with psp_verstage change to make SOC
Cezanne work quickly. This patch is defacto a subset of
https://review.coreboot.org/c/coreboot/+/59308
which implements the framework of address mode and covers mode
0,1,2. Some hardcode value like 29 can be removed in 59308.
BUG=b:188754219
Test=Majolica (Cezanne)
Change-Id: I7701c7819f03586d4ecab3d744056c8c902b630f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
In cbfs_add_component(), the |offset| variable confusingly jumps back
and forth between host address space and flash address space in some
cases. This patch tries to clean that logic up a bit by converting it
to flash address space very early in the function, and then keeping it
that way afterwards. convert() implementations that need the host
address space value should store it in a different variable to reduce
the risk of confusion. This should also fix a tiny issue where
--gen-attribute might have previously encoded the base address as given
in CBFS -- it probably makes more sense to always have it store a
consistent format (i.e. always flash address).
Also revert the unnecessary check for --base-address in
add_topswap_bootblock() that was added in CB:59877. On closer
inspection, the function actually doesn't use the passed in *offset at
all and uses it purely as an out-parameter. So while our current
Makefile does pass --base-address when adding the bootblock, it actually
has no effect and is redundant for the topswap case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Idf4721c5b0700789ddb81c1618d740b3e7f486cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Currently, `checkpatch.pl`, imported from the Linux project, checks for
75 characters per line [2]:
> Suggest line wrapping at 75 columns so the default git commit log
> indentation of 4 plus the commit message text still fits on an 80
> column screen.
But Gerrit’s Web interface and its commit hooks use with 72 characters
per line [2]:
remote: commit 35bb56d: warning: too many message lines longer than 72 characters; manually wrap lines
remote:
remote: SUCCESS
remote:
remote: https://review.coreboot.org/c/coreboot/+/60004 [DO NOT SUBMIT] Gerrit commit msg line length test [NEW]
So, decrease the suggested length from 75 to 72 characters per line.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a076f40d8c9be95bee7bcf18436655e1140447f
[2]: https://review.coreboot.org/60004
Change-Id: Ic9c686cb1a902259b18377b76b5c999e94660fed
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
As part of the `what-jenkins-does` target, combine the code coverage
data from all unit tests (currently just coreboot and libpayload).
BUG=b:203800199
TEST=`make what-jenkins-does && ls -l coreboot-builds/coverage.info`
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Id99615ca8279f80a402d5371221b8fd36fb91d55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
The placement calculation logic in cbfs_add_component() has become quite
a mess, and this patch can only fix that to a limited degree. The
interaction between all the different pathways of how the `offset`
variable can be set and at what point exactly the final placement offset
is decided can get quite convoluted. In particular, one existing problem
is that the offset for a file added with the --align flag is decided
before the convert() function is called, which may change the form (and
thereby the size) of the file again after its location was found --
resulting in a location that ends up being too small, or being unable to
find a location for a file that should fit. This used to be okay under
the assumption that forced alignment should really only be necessary for
use cases like XIP where the file is directly "used" straight from its
location on flash in some way, and those cases can never be compressed
-- however, recent AMD platforms have started using the --align flag to
meet the requirements of their SPI DMA controller and broken this
assumption.
This patch fixes that particular problem and hopefully eliminates a bit
of the convolution by moving the offset decision point in the --align
case after the convert() step. This is safe when the steps in-between
(add_topswap_bootblock() and convert() itself) do not rely on the
location having already been decided by --align before that point. For
the topswap case this is easy, because in practice we always call it
with --base-address (and as far as I can tell that's the only way it was
ever meant to work?) -- so codify that assumption in the function. For
convert() this mostly means that the implementations that do touch the
offset variable (mkstage and FSP) need to ensure they take care of the
alignment themselves. The FSP case is particularly complex so I tried to
rewrite the code in a slightly more straight-forward way and clearly
document the supported cases, which should hopefully make it easier to
see that the offset variable is handled correctly in all of them. For
mkstage the best solution seems to be to only have it touch the offset
variable in the XIP case (where we know compression must be disabled, so
we can rely on it not changing the file size later), and have the extra
space for the stage header directly taken care of by do_cbfs_locate() so
that can happen after convert().
NOTE: This is changing the behavior of `cbfstool add -t fsp` when
neither --base-address nor --xip are passed (e.g. FSP-S). Previously,
cbfstool would implicitly force an alignment of 4K. As far as I can tell
from the comments, this is unnecessary because this binary is loaded
into RAM and CBFS placement does not matter, so I assume this is an
oversight caused by accidentally reusing code that was only meant for
the XIP case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia49a585988f7a74944a6630b77b3ebd79b3a9897
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update configs so that they work with NixOS 21.11. Drop `iasl` package
since it was replaced with `acpica-tools`.
Change-Id: Icb9a382b83b3b3e55126bb0bb508659d11497a05
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
endian.h wasn't included (although it probably came in as an indirect
include) but in some header sets _XOPEN_SOURCE overrides _DEFAULT_SOURCE
whereas the latter is a super set of the former:
We should get the same things as with _XOPEN_SOURCE (such as memccpy for
which it has been defined) but also extra features like htole32.
Change-Id: Iaee7495b2ae64fdc719ae0879ea95fe7df286212
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Libpayload requires cbmem_id.h file to support extracting values from
CBMEM IMD entries of coreboot tables. Libpayload use BSD-3-Clause
license, and all of its files used to compile a static library have to
use it too.
Change-Id: I97c080e34ebdbcdf14fe3a3c9515b1dea8ede179
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Commit 796aeeba96 (util/cse_fpt: Add a new tool for managing Intel CSE
FPT binaries) and commit d7fb6a90e1 (util/cse_serger: Add a new tool
for stitching CSE components) add two utilities, and building cbfstool
also generates executables for them. When building cbfstool standalone,
these executables are placed in `util/cbfstool/`, and Git should never
track them.
Specify these executables' file names in .gitignore in order to prevent
unintentional inclusion of these files in commits, which is very likely
to happen when using `git add` on directories.
Change-Id: I285a4d7aeee642822eaae2eb69e5d52efb4bc8c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59670
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of maintaining two complete Makefiles, reuse the coreboot
build system rules in the stand-alone Makefile.
Change-Id: I5d894a1f079799478bce0bd200ac735097f3806b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59669
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Ensure that the separate Makefile doesn't break.
Change-Id: I0fbe37dc01e46022c5e6de5629eb99f6b86b0b14
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Commit f1e401c6cb (util/cbfstool/flashmap/fmap.c: fix fmaptool
endianness bugs on BE) makes use of endianness conversion macros
in cbfstool's FMAP code, which is also used by ifdtool. At least
on Linux, the <endian.h> header provides these helpers, but only
when `__USE_MISC` is defined, which is defined in the <ctypes.h>
header when `_DEFAULT_SOURCE` is defined. This was accounted for
in `Makefile.inc`, but not in `Makefile`. As a result, trying to
build ifdtool as a standalone tool (i.e. not as part of building
a coreboot image) results in build errors because the endianness
conversion macros are not defined.
Define `_DEFAULT_SOURCE` in `Makefile` to fix the build errors.
Change-Id: I8c2bbc07ddd87d885e2d6f5c7f2bd501e5c4e3b0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59663
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without manual handling, when 3rdparty/intel-sec-tools isn't around,
`make what-jenkins-does` reports only
go: go.mod file not found in current directory or any parent directory; see 'go help modules'
which isn't meaningful or actionable. Instead check that the go.mod file
exists and bail out with a better error message before trying to run
`go mod vendor`.
Change-Id: I035747746ca5fd54841bd67352044dde12a28185
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This patch makes all accesses to the FMAP fields explicitly little endian.
It fixes issue where build on BE host produced different binary image than
on LE.
Signed-off-by: Marek Kasiewicz <marek.kasiewicz@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Change-Id: Ia88c0625cefa1e594ac1849271a71c3aacc8ce78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add events for Chrome OS diagnostics in eventlog tool:
* ELOG_TYPE_CROS_DIAGNOSTICS(0xb6): diagnostics-related events
* ELOG_CROS_LAUNCH_DIAGNOSTICS(0x01): sub-type for diagnostics boot
These events are not added anywhere currently. They will be added in
another separate commit.
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: I1b67fdb46f64db33f581cfb5635103c9f5bbb302
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Document 319973-003 (ICH10 datasheet) and document 324645-006 (6-series
PCH datasheet) indicate that the name of this register is `GP_LVL3`,
not `GPIO_LVL3`. Correct the name.
Change-Id: I44cc41843c9f7cd0796bd198fb89447d787f155a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Add the PCI device ID for the ICH10D southbridge. While we're at it,
also fix up whitespace in inteltool.h of an adjacent definition.
Change-Id: I98d88a9ce27d3ddaafd7123ee51b2111a8bef019
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Related to https://review.coreboot.org/c/coreboot/+/58555
commit-id: 35b7e0a2d82ac
In 58555, we added the SOC ID for Stoneyridge in amdfwtool
command line. But it raised building error because it then called
"set_efs_table" without setting SPI mode. So we skipped calling that.
But in set_efs_table, it has case for Stoneyridge. The boards also
need to have this setting. So we remove the skipping and give the
proper SPI mode in mainboard Kconfig.
Change-Id: I24499ff6daf7878b12b6044496f53379116c598f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Fix the CL:
https://review.coreboot.org/c/coreboot/+/58942
The type comboable was int but set as true.
Change-Id: Id2c43378735c089a27a5aa683b55a0f7ec3677de
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For combo layout, this is for combo header.
For non-combo layout, this is for PSP directory.
Change-Id: Ie7b5aec6b511ad61972908d1d22a13aeb7dd73a9
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Begin comments with # instead of ## to match the Makefile.inc generated
by spd_tools.
BUG=None
TEST=None
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: If2d716a7338fd5af8216b2bcd894fc88a9df137e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
For the stoneyridge, soc_name is not set in Makefile, so set_efs_table
is not called. Keep it unchanged.
Change-Id: I0e82188ce64733420a578446e22a077ef789be92
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Need to check the FWs number limit several times. So pack the
duplicated steps into a function. And do it before access the new
entry.
Change-Id: I71117d1c817c0b6ddaea4ea47aea91672cc6d55a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add documentation describing how to add support for a new memory
technology to spd_tools:
- Add a section to the README.
- Document the memTech interface in spd_gen.go.
BUG=b:191776301
TEST=None
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ie710c1c686ddf5288db35cf43e5f1ac9b1974305
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59005
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This error prevented the last line of the Kconfig tree from being
printed or added to the output file. This is a significant problem if
you try to use the generated file as the kconfig source, because it
changes CONFIG_HAVE_RAMSTAGE from defaulting to yes to defaulting to
NO. This causes the build to stop working.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I3ec11f1ac59533a078fd3bd4d0dbee9df825a97a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add COV=1 and the `coverage-report` target to unit test build rules
in `what-jenkins-does` so that we get code coverage data from the
coreboot and libpayload unit tests.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I96669c47d1a48e9ab678a4b9cb1d0c8032d727f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add LP5 support to spd_tools. Currently, only Intel Alder Lake (ADL) is
supported.
The SPDs are generated based on a combination of:
- The LPDDR5 spec JESD209-5B.
- The SPD spec SPD4.1.2.M-2 (the LPDDR3/4 spec is used since JEDEC has
not released an SPD spec for LPDDR5).
- Intel recommendations in advisory #616599.
BUG=b:201234943, b:198704251
TEST=Generate the SPD and manifests for a test part, and check that the
SPD matches Intel's expectation. More details in CB:58680.
Change-Id: Ic1e68d44f7c0ad64aa9904b7e1297d24bd5db56e
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Introduce the `smbios_dev_info` devicetree keyword to specify the
instance ID and RefDes (Reference Designation) of onboard devices.
Example syntax:
device pci 1c.0 on # PCIe Port #1
device pci 00.0 on
smbios_dev_info 6
end
end
device pci 1c.1 on # PCIe Port #2
device pci 00.0 on
smbios_dev_info 42 "PCIe-PCI Time Machine"
end
end
The `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` Kconfig option enables using
this syntax to control the generated Type 41 entries. When this option
is enabled, Type 41 entries are only autogenerated for devices with a
defined instance ID. This avoids having to keep track of which instance
IDs have been used for every device class.
Using `smbios_dev_info` when `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` is not
enabled will result in a build-time error, as the syntax is meaningless
in this case. This is done with preprocessor guards around the Type 41
members in `struct device` and the code which uses the guarded members.
Although the preprocessor usage isn't particularly elegant, adjusting
the devicetree syntax and/or grammar depending on a Kconfig option is
probably even worse.
Change-Id: Iecca9ada6ee1000674cb5dd7afd5c309d8e1a64b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Order functionally:
* first "all" and build-$tools
* followed by clean
* followed by the architecture targets
The order was chosen this way because the architecture targets are
the mostly likely to continue to grow.
While at it, also fix the build_nasm mention (it was build-nasm)
and add build_make.
Change-Id: Id58338a512d44111b41503d4c14c08be50d51cde
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58796
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream's changes only affect a script that we don't use.
Still, this keeps us in sync with the official version.
Change-Id: I39cbbfb8dc816b4f36f92e6bd53f40c733691242
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Upstream's changes have been minimal, to the perl script that we
don't use and a constness change, so I expect no harm. Still, this
keeps us in sync with the official version.
Change-Id: I5e5a2400bc3323938da4b946930e2ec119819672
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is what quilt writes on `quilt refresh` and what it can apply and
unapply cleanly.
Change-Id: I8c8586da384b65fd5c21c1c1a093642534f83283
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It was added for a specific defunct project by a specific defunct
company.
Change-Id: Ib56ae0fdc1a50d24ff44c7879c43f8e94a5bfa95
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Nobody calls the function until combo or A/B is added, so suppress the
warning for now.
Test=Majolica (Cezanne)
Change-Id: I3082b850fb3fd2d7ae83a1c4dfd89eb7e1bd0f97
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This CL adds a python test for elogtool.
It tests the basic functionality of elogtool: list, clear and add.
A future CL will include more complex tests.
BUG=b:172210863
TEST=pytest elogtool_test.py
Change-Id: If1241ad070d1c690c84f5ca61c0487ba27c2a287
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add cross-toolchain version file to the release tarball, which can be
used for pre-setting the variables used in buildgcc.
Change-Id: Iad1e0adaa95b71f161caf978276bfb0a63eac8f4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For reproducibility, a version string is appended to the version of the
tools used in the cross-toolchain. Currently, git is used to determine
that version string at runtime of this script. There are cases, where
it's not possible to determine that version string, e.g. when a release
tarball is used, and if so, the version string is just `v_`.
Thus, allow pre-setting the variable `CROSSGCC_VERSION`.
Change-Id: I888ccd877c93436b5e033528c43bd8667b8d2f10
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
In preperation to CB:58396, add the parameter `-W|--print-version`,
which allows printing the content of `CROSSGCC_VERSION`. In
combination with CB:58396, this can be used to pre-set the variable
in case of the git history is not accessible.
Change-Id: I9a205ca0ecb0ece47eb5d8fa73706478354512ff
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For reproducibility, the buildgcc script is copied to the destination
folder of the toolchain. `CROSSGCC_COMMIT` is used as a file name
extension for the script and was introduced when `CROSSGCC_VERSION`
didn't contain the commit yet. Since this is not the case anymore,
remove it.
Change-Id: Id0a0b657eb828b2728ff787228eaa38be83d9517
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58450
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When using `DECLARE_OPTIONAL_REGION`, it is assumed that
REGION_SIZE(name) == 0 if the region was not defined in the memlayout.
When using non-rmodule stages (i.e., bootblock, romstage, etc), this
assumption holds true, but breaks down in rmodule (i.e., ramstage)
stages.
The rmodule tool is not currently omitting undefined externals from the
relocation table. e.g.,
extern u8 _##name##_size[];
This means that when the rmodule loader runs, it will rewrite the symbol
from 0 (which is the default the linker assumed) to 0 + offset. This is
wrong since the symbol doesn't actually exist. Instead we need to omit
the relocation so it continues to keep the default value of 0.
BUG=b:179699789
TEST=Print out REGION_SIZE(cbfs_cache) in ramstage and verify it is set
to 0.
I also see the following printed by the rmodtool now:
DEBUG: Omitting relocation for undefined extern: _watchdog_tombstone_size
DEBUG: Omitting relocation for undefined extern: _watchdog_tombstone
DEBUG: Omitting relocation for undefined extern: _watchdog_tombstone
DEBUG: Omitting relocation for absolute symbol: _stack_size
DEBUG: Omitting relocation for absolute symbol: _program_size
DEBUG: Omitting relocation for absolute symbol: _cbmem_init_hooks_size
DEBUG: Omitting relocation for absolute symbol: _payload_preload_cache_size
DEBUG: Omitting relocation for absolute symbol: _payload_preload_cache
DEBUG: Omitting relocation for absolute symbol: _payload_preload_cache_size
DEBUG: Omitting relocation for absolute symbol: _payload_preload_cache
DEBUG: Omitting relocation for undefined extern: _cbfs_cache
DEBUG: Omitting relocation for undefined extern: _cbfs_cache_size
As you can see the _watchdog_tombstone will also be fixed by this CL.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib57e263fa9014da4f6854637000c1c8ad8eb351a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Instead of using two variables, one for the boolean value and one for
the path, use just one with the path. Since an empty string evalutes to
false, this simplification does not change behaviour.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I2f1171789af6815094446f107f3c634332a3427e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of substituting the delimiter later, put $inside_choice together
right in the first place.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia713510a683101c48c86a1c3722ebb1607a29288
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This change adds a new command `create-cse-region` to cse_serger tool
which takes as inputs offset:size and file for different CSE
partitions and generates the entire CSE region image.
BUG=b:189177186
Change-Id: Ib087f5516e5beb6390831ef4e34b0b067d3fbc8b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change replaces `struct cse_layout_regions` with an array of
`struct region` and introduces enums for DP and BP[1-4]. This makes it
easier to loop over the different regions in following changes.
BUG=b:189177186
Change-Id: If3cced4506d26dc534047cb9c385aaa9418d8522
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change moves `read_member` and `write_member` helper functions
out of cse_fpt.c and cse_serger.c into cse_helpers.c to avoid
duplication.
BUG=b:189177186,b:189167923
Change-Id: I7b646b29c9058d892bb0fc9824ef1b4340d2510c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds a new tool `cse_serger` which can be used to print,
dump and stitch together different components for the CSE region.
BUG=b:189177186
Change-Id: I90dd809b47fd16afdc80e66431312721082496aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds a new tool `cse_fpt` which can be used to print and
dump CSE partitions in Flash Partition Table (FPT) format.
BUG=b:189167923
Change-Id: I93c8d33e9baa327cbdab918a14f2f7a039953be6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The element at offset 0x14 in the embedded_firmware struct is the
pointer to the combo PSP directory header, so rename it from comboable
to combo_psp_directory to clarify that this is not a flag, but a pointer
to a data structure. Also rename psp_entry to psp_directory since it
points to the PSP directory table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic6149c17ae813f4dcea71c308054849a1a2e4394
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This change adds a helper function `buffer_from_file_aligned_size`
that loads a file into memory buffer by creating a memory buffer of
size rounded up to the provided `size_granularity` parameter.
BUG=b:189177186,b:189167923
Change-Id: Iad3430d476abcdad850505ac50e36cd5d5deecb4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This rule was creating trouble:
* A symbol may only be declared inside or outside a choice.
The linter treats every occurence of a `config` entry as a symbol
declaration, even when it's just setting a default or adding selects.
This is not easy to fix as the symbol objects are not created first
and then added to the $symbols array when we know what kind of decla-
ration we have, but are created incrementally inside this global
list.
Change-Id: I48a17f6403470251be6b6d44bb82a8bdcbefe9f6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56410
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit adds a unit-tests framework ported from coreboot, and test
for drivers/speaker. Usage of the unit-tests framework is same as for
the coreboot one.
Change-Id: Iaa94ee4dcdc3f74af830113813df0e8fb0b31e4f
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig
does not exist in the coreboot tree (including submodules), drop it.
These files should be stored in the `site-local` subdirectory and the
paths specified for each board in `site-local/Kconfig`. For example:
config VGA_BIOS_FILE
default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200
Note that this is just an example. There are better ways to structure
one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option
would be one of them, though variants may still need special handling.
Also, update autoport to not generate `VGA_BIOS_FILE` defaults.
Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Fix include of nvs.h to reflect commit 661ad4666c (ACPI: Select
ACPI_SOC_NVS only where suitable); and re-add <device/pci_ops.h>,
removed in commit 0aad0531dc (util/autoport/bd82x6x.go: Drop unused
includes), as the generated early_init.c uses pci_write_config16().
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: Ic1e97cfa7dce0e4d25f7a37c28d3635bdbf6c2a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
UEFI payload is supported on some ARM64 platforms, for example MT8195.
As a result, add MACHINE_TYPE_ARM64 to support ARM SystemReady.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I4c0c6e263bd2f518a62ff9db44d72dd31086756a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
nvme-cli is used to manage NVMe devices and it supports many vendors.
Also, it seems it's commonly used to do firmware updates.
Change-Id: I26a78867b01d3af0441827c5b25343a46d7ddea1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
This reverts commit d94f8bbe9d.
This is a reland of https://review.coreboot.org/57651. The original
change broke parallel abuild runs since the xcompile file was deleted by
every recursive call to abuild. This issue was fixed by rebasing on top
of a change which only regenerates the xcompile on non-recursive calls.
BUG=None
TEST=Parallel abuild run succeeds.
Change-Id: I086ba7b2ae1b8b14459838bd18ce962a84aa306d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
elogtool was setting the timestamp with the wrong value in the month.
This CL fixes that by incrementing the month by one. This is needed
since gmtime() returns the month value starting at 0.
TEST=pytest elogtool_test.py (see next CL in relation chain)
Change-Id: I00f89ed99b049caafba2e47feae3c068245f9021
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
If abuild called itself recursively, the file already exists and we can
spare us one evaluation of all the makefiles per recursive abuild run.
Change-Id: Id3e2239354ec251c24c03c971987586deeb026c5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Defining defaults for symbols used inside choices is not allowed. Add a
check for this, so we can drop the existent, overly restrictive checks
in the follow-up change.
Change-Id: I45bce2633dbd168fceb81ceae9b68621b28526e8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Various fixes to gnat and the improved nds32 backend have been merged
into gcc by now, so we don't need to carry those patches anymore.
Change-Id: Icdee2a8beedd109ee1f0eef6f32f7accbf66674b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The migration to the new unified version of spd_tools is complete, so
the old lp4x and ddr4 versions can be removed.
BUG=b:191776301
TEST=None
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I6b1fc297739efc8dc7d7eec64956bf3343984604
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Ensure that the order of entries in each platform manifest is consistent
every time spd_gen is run.
BUG=b:191776301
TEST=Run spd_gen for lp4x and ddr4, check that the manifests are
unchanged.
Change-Id: I7bfea65c8fc781df80a8725c0cf20c7547c857e8
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update the new variant templates to refer to the new unified version
of spd_tools:
- Update the comments in mem_parts_used.txt
- Change the placeholder SPD in Makefile.inc to 'placeholder'
BUG=b:191776301
TEST=None
Change-Id: I03265de0d1182da81dd25a2fe6f940a0b82e5fa4
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The value of level defined in table is the default one. We now give an
extra option in config file to change this value so some FWs can be
dropped in a more optimized way.
For the non A/B recovery mode, The value could be L1, L2, Lb or Lx,
which are level 1, leve 2, level both and using default value. If it
is empty or Lx, left the level in table unchanged.
Give a redundant field [12bxBX] in regular exprssion for A/B recovery
which will be done later.
Change-Id: I0847bc3793467a2299f14d1d2d2486f3f858d7f3
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Currently spd_tools treats PCO and PLK as separate platforms. This is
unnecessary since they have the same SPD requirements. Remove PLK, and
use PCO as the platform for all zork variants.
BUG=b:191776301
TEST=None
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I7eeeab53fb3e0d92c3675fb80b4747297d4257ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Combine the existing lp4x and ddr4 READMEs into a single file, and
update it to reflect the new unified version of the tools.
BUG=b:191776301
TEST=None
Change-Id: I866932a1d0b5b6b47b0daff893b37de7a302b4e6
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add a 'Generated by' string to the generated Makefile.inc and
dram_id.generated.txt, showing the command used to generate the files.
BUG=b:191776301
TEST=Run part_id_gen, check that the generated files contain the string
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ic9a7826212a732288f36f111b7bc20365a1f702d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently, one of the arguments to part_id_gen is the directory
containing the SPD files, e.g. spd/lp4x/set-0. This requires the user of
the tool to understand the spd/ directory structure, and manually look
up the set number corresponding to their platform.
Change part_id_gen to take the platform and memory technology as
arguments instead of the SPD directory, and automatically determine the
SPD directory by reading the platforms manifest file generated by
spd_gen.go.
BUG=b:191776301
TEST=Run part_id_gen and check that the generated Makefile.inc and
dram_id.generated.txt are the same as before. Example:
util/spd_tools/bin/part_id_gen \
ADL \
lp4x \
src/mainboard/google/brya/variants/kano/memory \
src/mainboard/google/brya/variants/kano/memory/mem_parts_used.txt
Change-Id: I7cd7243d76b5769e8a15daa56b8438274bdd8e96
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Currently, the maximum part ID of 15 is enforced only for manually
assigned IDs. Also enforce it for automatically assigned IDs.
BUG=b:191776301
TEST=part_id_gen fails when the number of part IDs which would be
assigned is greater than MaxMemoryId.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I802190a13b68439ccbcdb28300ccc5fd1b38a9c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This CL fixes a compilation error that happens in 32-bit platforms.
This error happens because printf() was using %ld instead of %zu to
print size_t variables.
This CL fixes it.
BUG=b:200608182
TEST=emerge-kevin (ARM 32-bit)
TEST=emerge-eve (Intel 64-bit)
Change-Id: I340e108361c052601f2b126db45caf2e35ee7ace
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Currently there are two versions of gen_part_id.go, one for LP4x and one
DDR4. This change implements a unified version of this tool.
The new part_id_gen.go is almost identical to the existing
ddr4/gen_part_id.go. The new version was based on the ddr4 version and
not the lp4x version, since the ddr4 version contains extra logic to
support fixed IDs in the mem_parts_used files.
The only non-trivial change from ddr4/gen_part_id.go is to include the
full paths of SPD files in the generated Makefile.inc. E.g. instead of
SPD_SOURCES += lp4x-spd-1.hex
the full path relative to the coreboot root directory is included:
SPD_SOURCES += spd/lp4x/set-0/spd-1.hex
BUG=b:191776301
TEST=For each variant of brya/volteer/dedede/guybrush/zork, run
part_id_gen and verify that the generated Makefile.inc and
dram_id.generated.txt are identical to those currently in the src tree,
except for the modified SPD file paths in Makefile.inc.
Example:
util/spd_tools/bin/part_id_gen \
spd/lp4x/set-0 \
src/mainboard/google/brya/variants/kano/memory \
src/mainboard/google/brya/variants/kano/memory/mem_parts_used.txt
Change-Id: Ib33d09076f340f688519dae7956a2b27af090c0b
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Currently, running abuild in a fresh checkout without having built the
toolchain results in the following confusing behaviour:
1. Run abuild. It fails due to the missing coreboot toolchain, and the
error message suggests running `make crossgcc`.
2. Run `make crossgcc`. It succeeds.
3. Re-run abuild. It still fails due to a missing coreboot toolchain.
This happens because the first abuild run generates an xcompile file
which uses the system toolchain. The second abuild run doesn't
regenerate the xcompile, so it still fails due to the non-coreboot
toolchain.
To avoid this confusing behaviour, regenerate the xcompile file every
time abuild is run.
BUG=None
TEST=Perform the steps above in a clean checkout. The second abuild run
now succeeds.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I78a7702c45cecbfe8460ec55df03741e5ced94b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change uses _dev_${ALIAS_NAME} as the name for `struct device` if
the device has an alias. In addition to that, it emits
_dev_${ALIAS_NAME}_ptr which points to the device structure. This
allows developers to directly reference a particular device in the tree
using alias name without having to walk the entire path. In later CLs,
mainboards are transitioned to use this newly emitted device structure
pointers.
Change-Id: I8306d9efba8e5ca5c0bda41baac9c90ad8b73ece
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Currently there are two versions of spd_tools: one for LP4x and one for
DDR4. This change is the first step in unifying these into a single
tool.
This change implements a unified version of the spd_gen tool, by
combining the functionality currently in lp4x/gen_spd.go and
ddr4/gen_spd.go. The unified version takes the memory technology as an
argument, and generates SPD files for all platforms supporting that
technology.
BUG=b:191776301
TEST=Compare the SPDs generated by the old and new versions of the tool
for all supported platforms. For reference, the test script used is
here: https://review.coreboot.org/c/coreboot/+/57511
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I7fc036996dbafbb54e075da0c3ac2ea0886a6db2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
To save the space for FW, some of the FWs are going to be defined as
LVL2 entries. To be compatible to "flattened" layout, we still drop
the LVL2 entry to level1 if there is only one level.
Change-Id: Ibe8cdd5c14225899352b02bb19aae6059d56d428
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Make neovim the default editor and create an alias for vim.
The NixOS module for neovim is currently broken. Thus, add a note to
`description.md` to switch to that later.
Change-Id: I9345a6e32f3035565e55e50579c97121b4987d83
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57393
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a Nix shell file which provides an environment for compilation of
the coreboot toolchain. The Nix shell can be used by running the
following command:
$ nix-shell --pure util/nixshell/toolchain.nix
The `--pure` parameter is optional, but it makes sure that the
environment is as minimal as possible and does not contain any unrelated
or unneeded software or configuration.
Once compiled, the coreboot toolchain can be used without loading the
shell environment.
If `--pure` is used, SSL connections won't work since the
`SSL_CERT_FILE` environment variable is not configured, which makes the
build tool unable to download the source files. Thus, let it point to
the system certificate store.
Change-Id: I341ee28c5451d2c6cb4ff22de67161d99f4ca77a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Adds "add" command to elogtool. This command allows adding elog events
manually. It supports event type and, optionally, event data.
If the free buffer space is < 1/4 of the total space, it shrinks the
buffer, making sure that ~1/4 of the free space is available.
BUG=b:172210863
TEST=./elogtool add 0x17 0101
./elogtool add 0x18
Repeated the same tests on buffers that needed to be shrunk.
Change-Id: Ia6fdf4f951565f842d1bff52173811b52f617f66
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This function is "extracted" from cmd_clear().
This new function will be called from cmd_add(), and new command that
will be added in a future CL (see CL chain).
Additional minor fixes:
- calls usage() if no valid commands are passed.
- Slightly improves usage() output. Needed for cmd_clear()
BUG=b:172210863
TEST=elogtool clear
Change-Id: I0d8ecc893675758d7f90845282a588d367b55567
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Install both versions of UEFITool, the one with the old engine and the
new one.
It's not possible to use both packages in the same environment, since
there is a collision between the names of the binary files. To make sure
a specific package is used, a new environment needs to be spawned with
the following command:
$ nix-shell -p <package_name>
The UEFITool binaries can be executed from the shell then.
Change-Id: Ia5d679c6e7cd01c2ab819bd6c085596a926c494d
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
It avoids the dependency on bison/flex, minimally speeds up the build
and also works around weird race conditions in some versions of bison
that need more investigation.
The issue this avoids manifests as a build error when creating
parser.tab.c:
input in flex scanner failed
make: *** [util/kconfig/Makefile.inc:66: build/util/kconfig/parser.tab.c] Error 2
Since the error happens within bison the alternative would be to make
bison part of our crossgcc environment to ensure that no broken OS
build is used.
BUG=b:197515860
TEST=things build with bison not installed
Change-Id: Ib35dfb7beafc0a09dc333e962b1e3f33df46a854
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With parser.tab.h depending on parser.tab.c it's possible for make
to initiate the creation of parser.tab.c, then try to compile it,
even though parser.tab.h is still missing.
This isn't normally an issue yet because bison creates them both at
a time but with pre-compiled files this will become a problem.
Pattern rules support (until recently as a special case that no other
type of rule could implement) multiple targets that are actually
treated as "one command creates multiple output files" so use that
to state the relationship properly.
Change-Id: I4aa7eca9d3123808e0665a15a99c04fac7384940
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Manually maintaining a list of fields just to avoid printing some
unnecessary CPP guards isn't worth the maintenance burden. Instead,
always generate these guards, even if they guard nothing.
Change-Id: I6c84180d83ac39a895e02d196acb7074eb052d7f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57459
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds "clear" command to cbfsutil/elogtool tool.
"clear" clears the RW_ELOG region by using either:
* flashrom if no file is provided
* or using file write if an input file is provided.
The region is filled with ELOG_TYPE_EOL. And a
ELOG_TYPE_LOG_CLEAR event is inserted.
Additionally, it does a minor cleanup to command "list", like:
* use buffer_end()
* add "list" to the cmds struct
* and make elog_read() very similar to elog_write()
Usage:
$ elogtool clear
BUG=b:172210863
TEST=elogtool clear && elogtool list
elogtool clear -f invalid.raw
elogtool clear -f valid.raw
Change-Id: Ia28a6eb34c82103ab078a0841b022e2e5e430585
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
On some platforms, runtime firmware crashes write logs to the CBMEM
console. For those, since a crash reboots the system, by the time we
have a chance to run `cbmem` again the boot where the crash happened
will be the one before the "last" (current) boot. So cbmem -1 doesn't
show the interesting part, and cbmem -c potentially shows a lot that is
cumbersome to dig through. This patch introduces a new option cbmem -2
to explicitly show only the boot cycle before the last one.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I6725698f4c9ae07011cbacf0928544cebb4ad6f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
The update_efs_spi_speed allows changing the SPI speed manually in a
binary that has already been built. This will allow binaries not built
for the EM100 SPI ROM emulator to be updated so that they will work.
There is a corresponding change that will check to see if the EFS value
has been modified from the original speed and will prevent coreboot from
updating the SPI speed and mode.
BUG=b:177233017
TEST=Update SPI speed in existing binary. See that SPI speed has
changed.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I905a9fd8bd93a28aab927dffecbbcf24934b9e03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56644
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Even though `device` entries are children of `chip` entries in the
devicetree source format, the chips in the translated C structures
are only hooked up to device nodes. Hence, any chip with all its
settings will be silently dropped by sconfig if there is no device
node below it.
Let's adapt the parser to ensure that there is at least one `device`
entry. The intermediate `chipchildren_dev` rule applies until the
first `device` entry is found, then everything continues as before
with the `chipchildren` rule.
Change-Id: I54830bc1fc7d00a0605f3fe4d36a83ef57ef3312
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51119
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Haswell has its Mini-HD device and is at card0, so we need to search
for the PCH HD Audio device instead of using card0.
Change-Id: I2bc420fdbe9731ae835f63add85db79f04201da4
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34357
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch also adds LynxPoint and WildcatPoint-LP IOBP registers,
which is used to get the USB and SATA configuration values for
autoport.
Change-Id: I1f11640fdff59a5317f19057476f7e48c2956ab9
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41473
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Like USE_AMD_BLOBS and USE_QC_BLOBS in the case of the AMD and Qualcomm
repos, FSP_USE_REPO controls if the Intel FSP repo will get checked out
and will be available during the Jenkins runs. ADD_FSP_BINARIES will get
selected in drivers/intel/fsp2_0/Kconfig when FSP_USE_REPO is selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I72faa6f9e5f2b06ab7cd43595ae0b49bf4d39630
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add NixOS configurations for bootable live systems containing a set of
tools which might be useful for firmware development in general and for
working on coreboot.
There are two configurations provided. One for console-only and a
graphical one, which is mostly the same as the console image but it
comes with Gnome Shell as window manager and some graphical tools in
addition.
An image can be built using `build-console.sh`, respectively
`build-graphical.sh`. The resulting iso image can be found in
`result/iso/`.
The console image results in ~700MB, while the graphical one results in
~2GB.
Change-Id: Iaf49d198e99781434bd89d2a8a125a4988b77e1c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The patch is to fix "Not a usable UEFI firmware volume" issue when
creating CBFS/flash image. This issue is caused by adding FvNameGuid
in UefiPayloadEntry.fdf in EDKII. There is an ext header between header
of Fv and header of PayloadEntry in Fv with FvNameGuid. The ext header
causes the UefiPayloadEntry to be found incorrectly when parsing Fv.
Commit in EDKII: 4bac086e8e007c7143e33f87bb96238326d1d6ba
Bugzila: https://bugzilla.tianocore.org/show_bug.cgi?id=3585
Signed-off-by: Dun Tan <dun.tan@intel.com>
Change-Id: Id063efb1c8e6c7a96ec2182e87b71c7e8b7b6423
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57296
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: King Sumo <kingsumos@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the override functionality looks for device match, check that
the probe list for both the devices matches exactly if probe list
exists for the base device. This ensures that if there are two devices
with same identity (e.g. I2C address or USB port #) but using
different properties (registers) controlled by different probe
statements, then the two devices are not incorrectly matched as the
same device.
The check for base device having a probe list is performed before
comparing the probe lists because a base device might not really have
any probe requirements at all. So, when overriding such a device,
there is no need to check for the probe list match.
BUG=b:187193527
TEST=Verified by adding two I2C devices in the override tree with the
same I2C address and chip but different probe statements and confirmed
that both the devices are present in generated static.c file.
Change-Id: Ib18868b336cf4ffc9aa38aee7c6f333a35d32fce
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add buffer_end() function to common.h. This function returns a
pointer to the end of the buffer (exclusive).
This is needed by elogtool util. (See the next CL in the chain).
BUG=b:172210863
Change-Id: I380eecbc89c13f5fe5ab4c31d7a4fef97690a791
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change can make the code be more flexible. And later we will use
amd_cb_config to transfer parameters.
Change-Id: Ic726aa9fc5f67803210af71d3e9cf2438b7e2a9b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The issue is reported by Coverity. Using strcpy or strcat copying
string without checking length may cause overflow.
BUG=b:188769921
Reported-by: Coverity (CID:1438964)
Change-Id: I609d9ce405d01c57b1847a6310630ea0341e13be
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54946
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds the ability to output MSRs dump for the specified range of CPU
cores. This makes it easier to reverse engineer server multicore
processors using the inteltool utility.
The range is set using --cpu-range <start>[-<end>] command line option:
$ sudo ./inteltool -M --cpu-range 0-7
$ sudo ./inteltool -M --cpu-range 7-15
$ sudo ./inteltool -M --cpu-range 32
$ sudo ./inteltool -M will print a register dump for all cores, just
as before.
Change-Id: I3a037cf7ac270d2b51d6e453334c358ff47b4105
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35919
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Versions of expat before 2.4.0 have been renamed to prevent their
use, due to some kind of vulnerability. without updating this
dependency it is currently not possible to build crossgcc with GDB.
Change-Id: Iec2cf560902dc556a41206d7dcd65c22cf3e1215
Signed-off-by: Mackenzie May <ky0ko@disroot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56868
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The lp4x spd_tools also support Alder Lake (ADL), so update the the
README to reflect this fact.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iedb1ea1c3558e5f179feac2c725667db5b327b2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56857
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the binary output of the new elogtool to the .gitignore, so that
running "make -C util/cbfstool" keeps the tree clean.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I806338a4b33abbc3d55e4edef2736c19d56fa005
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Even though pkg-config might be installed, it might or will not return
true in the checks whether 'PKG' or 'PKG2' is installed.
Extend the script to look in another location for ncurses.h
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I4344ba2116c0b8618357db4248d993509cbb666e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Add a new tool that that prints elog events.
The tool, as input, accepts either a file with the RW_ELOG contents, or
if the file is not provided it reads the contents of RW_ELOG by calling
the "flashrom" tool.
The tool is based on "mosys eventlog list"[1]. For the moment it only
supports "list", but future commits will add additional functionality.
This commit also adds missing ELOG defines needed for the tool. These
defines are added with the rest of the ELOG defines, in
include/commonlib/bsd/elog.h
The tool is placed inside util/cbfstool. The rationale behind the
decision, is that this tool shares a lot in common with the other tools
located in cbfstool: vboot dependency, shared files like common.o and
valstr.o, and in spirit is similar to some of the tools located in
cbfstool/.
As an example, you call the tool like the following:
$ elogtool list -f rw_elog_dump.bin
[1]: https://chromium.googlesource.com/chromiumos/platform/mosys/+/refs/heads/main/lib/eventlog/elog.c
BUG=b:172210863
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Change-Id: Ia1fe1c9ed3c4c6bda846055d4b10943b54463935
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Our documentation claims that the DEFCONFIG make variable, used for
targets such as savedefconfig, defaults to 'defconfig'.
With the update to kconfig 5.13 we lost this default, so bring it back.
Fixes: 53ea1d44f0 ("util/kconfig: Uprev to Linux 5.13's kconfig")
Resolves: https://ticket.coreboot.org/issues/317
Change-Id: Idb88b69ffa855fa97df8c821601308e717575550
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56718
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When looking for C compilers, xcompile uses the "" prefix to "gcc" and
"clang" as a last-resort option. This fails in environments where such
default names are blocked to prevent "unclean" builds - such as Chrome
OS.
Allow overriding this prefix using the GENERIC_COMPILER_PREFIX variable
that is hopefully both descriptive enough to suggest what it is for and
unusual enough to not trigger by chance.
Change-Id: I16239f66730f1dbcb7482f223cea4ee5957af10c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for ADL:
1. H54G46CYRBX267
2. H54G56CYRBX247
3. K4U6E3S4AB-MGCL
4. K4UBE3D4AB-MGCL
BUG=b:194686484 b:194765811
TEST=build.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If85088f843ab11cc531a3975b5cac3e36b573970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
It only leads to missing symbol errors.
Change-Id: Idbce93232ba2b54561abab5b2747c418d6efa92b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Initially APL was considered as IFDv2 platform irrespective being
added into ifd_2_platforms[], hence commit hash 621ed4c had migrated
APL into IFDv1 which break its FLMSTR1/FLMSTR2/FLMSTR3 Read/Write
access. This change adds APL into the list of IFDv2 platforms to fix
booting issue on the LeafHill board.
Change-Id: Ied59ddb2fe05b421266a6b119fd6eab17b8beedc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56300
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rick Lee <rick.lee@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ESPI & LPC keywords were added for the zork program, but it was
found that they weren't needed, so they were never used.
BUG=None
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I3a78afc55477d62eac8056e2ca4bcdd3ab12ea47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56197
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This was originally several commits that had to be squashed into one
because the intermediate states weren't able to build coreboot:
- one to remove everything that wasn't our own code, leaving only
regex.[ch], toada.c, description.md and Makefile.inc.
- one to copy in Linux 5.13's scripts/kconfig and adapt Makefile.inc
to make the original Makefile work again.
- adapt abuild to use olddefconfig, simplifying matters.
- apply patches in util/kconfig/patches.
- Some more adaptations to the libpayload build system.
The patches are now in util/kconfig/patches/, reverse applying them
should lead to a util/kconfig/ tree that contains exactly the Linux
version + our own 5 files.
Change-Id: Ia0e8fe4e9022b278f34ab113a433ef4d45e5c355
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
I a file in configs/* has no suffix, then the default configuration
will override the results of the build generated by the configfile
from configs/*. Fix this by adding a '_' to the buildname.
Change-Id: Ic47105fafca41f1905a6569943079623bec5405a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The second generation EFS (offset 0x24[0]=0) uses
"binary relative" offsets and not "x86 physical
MMIO address" like gen1.
Chips like Cezanne can run in both cases, so no problem
comes up so far.
BUG=b:188754219
Test=Majolica (Cezanne)
Change-Id: I3a54f8ce5004915a7fa407dcd7d59a64d88aad0d
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently ifdtool breaks the descriptor because it treats it as IFDv1.
This change adds it to the list of IFDv2 platforms.
Fixes boot for X11SSH-LN4F.
Fixes: 8c082e5fef ("util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset")
Change-Id: I3f92b090e929336b5c18b442d1504ee1000f5594
Signed-off-by: Jan Tatje <jan@jnt.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56070
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Redirect stdout and stderr from grep to check for unknown timestamps,
when no timestamps are stored, which is already logged earlier.
Failed to run "/root/coreboot/util/cbmem/cbmem -t", ignoring
Getting remote dmesg
grep: /tmp/coreboot_board_status.dXmbUIBP/emulation/qemu-i440fx/4.14-876-gdb28040ee1/2021-07-02T23_14_33Z/coreboot_timestamps.txt: No such file or directory
Change-Id: Ib5400d4bd17e957b4cc1bf75bbd332d60ad226f5
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The -a flag was already implemented, it just wasn't exposed for the
add-payload command.
Setting the alignment of the payload will enable using the SPI DMA
controller to read the payload on AMD devices.
BUG=b:179699789
TEST=cbfstool foo.bin add-payload -a 64 ...
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9f4aea5f0cbeaa8e761212041099b37f4718ac39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
There is no need to repeat "import" for each module in GoLang. Use
this keyword only once in each file for code cleanliness.
Change-Id: Ibb24fafd409b31b174946a39ca1f810d59b87e76
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55985
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The dereferced parameter is never updated so passing a copy would work
too.
Change-Id: Ie36f64f55d4fc7034780116c28aaed65aa304d5e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55792
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This updates the intel-sec-tools submodule pointer to include a fake
acm binary to be included for buildtesting.
Change-Id: Id4a9e177f71306b8c5538a578da229a53d19487a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Vboot's Makefile is controlled by a ${DEBUG} environment variable.
As the name is very generic, it may be set by accident without any
intention to change the build. Having it set would break reproduci-
bility at least but it also turns out that the hostlib build would
be incomplete so that linking cbfstool fails due to internal calls
to vb2api_fail() which is not built in.
Change-Id: I2a9eb9a645c70451a320c455b8f24bfed197117c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
After commit 8c082e5fe (util/ifdtool: Use -p platform name
to detect IFDv2 platform and chipset) w/o this xeon_sp/cpx would be
detected as IFDv1 and see build error.
Fixes: 8c082e5fe ("util/ifdtool: Use -p platform name to detect IFDv2 platform and chipset")
Change-Id: I444e7d35a85d9d42fc25d654e57386f38cf1ec85
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The null-termination of `filetypes` was added after the code was
written, obviously resulting in NULL dereferences. As some more
code has grown around the termination, it's hard to revert the
regression, so let's update the code that still used the array
length.
This fixes commit 7f5f9331d1 (util/cbfstool: fix buffer over-read)
which actually did fix something, but only one path while it broke
two others. We should be careful with fixes, they can always break
something else. Especially when a dumb tool triggered the patching
it seems likely that fewer people looked into related code.
Change-Id: If2ece1f5ad62952ed2e57769702e318ba5468f0c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
We moved from gitweb to cgit to gitiles and some of the URL schemes
were lost during the transitions. Update to the gitiles scheme so
board-status links work again.
Change-Id: Id2a840bf89fab172e0eab21e303ac0c4666b6751
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
ifdtool uses `chipset` information to determine how certain straps
are decoded. This has been used for IFDv1 platforms as well as IFDv2
platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT).
IFDv2 platforms are all expected to pass in `-p` argument to identify
the platform. This platform information can be used to identify the
appropriate chipset information. For IFDv1 since `-p` argument is not
provided, ifdtool needs to use certain fields in the descriptor
(e.g. strap length) for unique identification of IFDv1 chipset.
This change updates `check_ifd_version()` function to:
1. Determine if IFD version is v1 or v2 based on `-p` argument.
If `-p` is not provided, it assumes that the platform is using IFDv1.
2. Based on IFD version, it calls either `ifd2_platform_to_chipset()`
or `ifd1_guess_chipset()` to determine chipset information.
This fixes the issue reported with CB:44815, where ifdtool is unable
to identify Alder Lake chipsets.
BUG=b:153888802
TEST=Able to dump FD contains correctly with platform quirks on Brya Platform.
> ifdtool -d coreboot.rom -p adl
PCH Revision: 500 series Tiger Point/ 600 series Alder Point
Change-Id: I25f69ce775454409974056d8326c02e29038ec8a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add EHL under same family tree as TGL & JSL, also fix a
spacing inconsistency line.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ice09861c104c4e339fc83631c75089fa069b3931
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55357
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Avoid using deprecated macros, where possible.
"GpioResetPwrGood" represents multiple valid updated values, depending
on the GPIO community and will be more difficult to update.
While Kabylake supports both sets of macros, it will cause build errors
on Coffeelake. In the GPD group, replace with "GpioDswReset."
Replace with "GpioResumeReset" in any GPP group.
Change-Id: Iab0bb09adad997bef3a2133c443471d4c634f423
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
This fixes a hard to debug hang that could occur in any stage, but in
the end it follows simple rules and is easy to fix.
In long mode the 32bit displacement addressing used on 'mov' and 'lea'
instructions is sign-extended. Those instructions can be found using
readelf on the stage and searching for relocation type R_X86_64_32S.
The sign extension is no issue when either running in protected mode or
the code module and thus the address is below 2GiB. If the address is
greater than 2GiB, as usually the case for code in TSEG, the higher
address bits [64:32] are all set to 1 and the effective address is
pointing to memory not paged. Accessing this memory will cause a page
fault, which isn't handled either.
To prevent such problems
- disable R_AMD64_32S relocations in rmodtool
- add comment explaining why it's not allowed
- use the pseudo op movabs, which doesn't use 32bit displacement addressing
- Print a useful error message if such a reloc is present in the code
Fixes a crash in TSEG and when in long mode seen on Intel Sandybridge.
Change-Id: Ia5f5a9cde7c325f67b12e3a8e9a76283cc3870a3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Paul Menzel