In order to integrate fsp 1.1 relocation with cbfstool one
needs to be able to supply the address to relocate the FSP
image. Therefore, allow this by returning offset for return
values. Note that exposed API has not changed.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Confirmed relocation values matched.
Change-Id: I650a08ffb9caf7e0438a988cae9bec56dd31753c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 53870b0df809418e9a09e7d380ad2399a09fb4fb
Original-Change-Id: Ic2ec63681ed4e652e2624b40e132f95d1e5a0887
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298831
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11663
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If the device has already been disconnected then we shouldn't enable
host channel to start any transfer, otherwise this channel goes into
an odd state the channel is enabled but can not be disabled by set
hcchar.chdis=1. So we need check the device connect status before
enable channel.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=None
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae3e690b2cd4a9ea8b5766ac873b0e00bf3a23de
Original-Change-Id: Ib3ecf486649ca11b302144f9c00a5e88424e90fa
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298402
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit ea96f947b5304fdde2e0991d23febaeba209dde1)
Original-Reviewed-on: https://chromium-review.googlesource.com/299398
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Idf48ffbc4c2794900e09dec6b2e34e33b21f87b4
Reviewed-on: http://review.coreboot.org/11662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When disconnect is detected in dwc2_split_transfer() the split
configuration registers should be cleared before return.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=On Jerry, usb hot plug works with devices behind hubs
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37594d8b4490b6d393d19d17d8e497db7de8817d
Original-Change-Id: Ie1eecec067305874513c6ceb95df4240dc393cd6
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295625
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d543e14cdc73bd549dd553c8d1d07672a1307981)
Original-Reviewed-on: https://chromium-review.googlesource.com/299700
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4604097743f2f9d763b29ee27f3bc1788a85a62
Reviewed-on: http://review.coreboot.org/11661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Patch b2a62622b (linking: move romstage and bootblock to use program.ld)
unified the linker scripts between different stages. Unfortunately it
omitted several special cases from the old bootblock.ld script that are
required for non-x86 environments.
This patch expands program.ld to once again merge the .BSS into the
program image for bootblocks (ensuring correct initialization by the
external loader). It also revives the .id section (which adds a
human-readable blurb of information to the top of an image) and fixes a
problem with unintended automated section alignment.
BRANCH=None
BUG=None
TEST=Jerry and Oak boot again.
Change-Id: I54271b8b59a9c773d858d676cde0218cb7f20e74
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6fddbc00963e363039634fa31a9b66254b6cf18f
Original-Change-Id: I4d748056f1ab29a8e730f861879982bdf4c33eab
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/299413
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
flmstr register bits have slightly different meaning for IFD v2.
BUG=chrome-os-partner:45091, chrome-os-partner:43461
TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image:
Found Master Section
FLMSTR1: 0x0a0b0000 (Host CPU/BIOS)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR2: 0x0c0d0000 (Intel ME)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR3: 0x08080118 (GbE)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: disabled
Requester ID: 0x0118
Then, run `ifdtool -l image.bin` and verify newly locked image is identical.
Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked
and unlocked regions are identical to above.
Finally, burn glados image, run `flashrom -V`, and verify ME regions is
locked and descriptor region is RO.
BRANCH=None
Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4
Original-Reviewed-on: https://chromium-review.googlesource.com/298968
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In LP0 resume, a couple of SDMMCx pad settings need to be set to 0 to
reduce power leakage.
BUG=None
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume >100 times
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9f35a90a8af2180443db2c4be75d4566d0990de5
Original-Change-Id: Ifc946b0cea437ef0807cea0c11609d8e09387e8e
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298195
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Joseph Lo <josephl@nvidia.com>
Original-(cherry picked from commit be3ac49a6bc4c9088d3799555d69c87c8ce1693c)
Original-Reviewed-on: https://chromium-review.googlesource.com/298154
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: If5d5cebc89b8220480b3c72293a410e782eb437e
Reviewed-on: http://review.coreboot.org/11656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
FSP should not lock CMOS unconditionally. coreboot sends Silicon
UPD parameter "RtcLock" to FSP to take action on CMOS
region locking/un-locking. This patch has CB generic code for
creating the Silicon UPD paramater.
BUG=chrome-os-partner:44484
BRANCH=none
TEST=Build and booted in kunimitsu, tested using below command-
When DIsabled RtcLock from devicetree in coreboot, booted to kernel
and run following commands -
>> crossystem fw_result=success
>> crossystem | grep fw_result
It should reflect the value that is set. Here, success.
If ENabled RtcLock from Coreboot devicetree, The same commands will
fail to update the fw_result status from crossystem utility.
CQ-DEPEND=CL:*229144
Change-Id: I7f63332097cdaf6eedefbc84bec69ce4e9cc59d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7b8293a2c55117d7ca2001ac9ec0de24d35b80b
Original-Change-Id: If708e2c782644dcf7f03785d1bfa235ef5385d80
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297980
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11655
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently, erase operation only works if the region is sector-aligned.
These asserts ensure we can erase the region when it's all used up.
Erase operation can be updated to handle unaligned erases by read,
update, write-back cycle. However, these asserts will still remain useful
in case the adjacent region contains critical data and mis-updating it
can cause a critical failure.
Additionaly we should write a FAFT test but it's more reliable to catch
it here since FAFT can fail in many ways.
BUG=none
BRANCH=master
TEST=tested on samus using misaligned nvram region
Change-Id: I3add4671ed354d9763e21bf96616c8aeca0cb777
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fc001a4d3446cf96b76367dde492c3453aa948c6
Original-Change-Id: Ib4df8f620bf7531b345364fa4c3e274aba09f677
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297801
Reviewed-on: http://review.coreboot.org/11654
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The EC doesn't support these commands so sending them is
not working. We have had a default policy of wake on USB
for a long time now and this runtime config isn't really
needed any longer.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I547d92b4e852664567792060bf1f7b60976bb9a6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4a929eb9ec422e145006505ea4d5fbd1ef3950be
Original-Change-Id: I01e80de65e6e1cdcabb24edb43bc671f5a8aa437
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298234
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The EC doesn't support these commands so sending them is
not working. We have had a default policy of wake on USB
for a long time now and this runtime config isn't really
needed any longer.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Ib789ae3a7ba56a11dfb5918cb40bfa2f044d1dc3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ed7391942afed94bfc7ad04880d4c2b865e5655
Original-Change-Id: I6fe10952f32673a447001b832ac6c6b04b22aef0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298233
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add common code for filling out the NVS fields that are used by
the ACPI _SWS methods. The SOC must provide a function to fill
out the wake source data since the specific data inputs vary by
platform.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I4f3511adcc89a9be5d97a7442055c227a38c5f42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cee5fa176c16ca44712bce8f3c8045daa5f07339
Original-Change-Id: I16f446ef67777acb57223a84d38062be9f43fcb9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298167
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11646
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There's no need to maintain two lists of dependencies that need to be
changed every. single. time.
Change-Id: I26bb8c884e98afe74fd9df11464bcf88e130cd92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11674
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It was added to an unused variable.
Change-Id: I869ffdda7e04b5c615931473c760d66b803fb98b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11673
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If we use a linux payload/any payload that wants to manage virtual
memory, and the payload is a supervisor (thus requiring virtual
addressing before being started), we need to make sure that the page
table is mapped into the virtual address space. Move the start address
of the tables so the payload can manage virtual memory.
Change-Id: I1d99e46f38a38a163fb1c7c517b1abca80cde0dc
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11621
Tested-by: build bot (Jenkins)
Existing memlayout code placed sections in overlapping areas, and would
overwrite the payload if it was large enough. Update memlayout.ld in
src/mainboard/emulation/spike-riscv to represent the spike emulator, and
add sbi interface which now has room into src/arch/riscv/bootblock.S.
Add utility code to qemu-riscv, but emulator itself has yet to be
updated to new ISA and as such should not be used.
Update Makefile to include all the files necessary for sbi interface.
Clean up unused include in src/arch/riscv/include/atomic.h and
whitespace in src/mainboard/emulation/spike-riscv/memlayout.ld
Fixed whitespace issues in spike_util.c
Change-Id: Id97fe75e45ac1361005bec6d421756ee3f98a508
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11370
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Kunimitsu has an ambient light sensor connected to the EC which
is presented to the OS as a standard ACPI0008 device.
BUG=chrome-os-partner:43493
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I7998c19e5514eda781cc20888cdb0732f81389ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a67e5ddfccea0776841fabe04be55c1854bf31f2
Original-Change-Id: I381dc9c5777370df2ea4c41c9e153b3277082718
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298252
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11645
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Glados has an ambient light sensor connected to the EC which
is presented to the OS as a standard ACPI0008 device.
BUG=chrome-os-partner:43493
BRANCH=none
TEST=test ALS functionality on glados P2 board
Change-Id: I4a4913a1b407720d85f6e630b674e550bf5e36df
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aee2b2446ca45039f1b4866feb83754861dba054
Original-Change-Id: I61f3f31ba077f63b36aa0cd9707e128e65c9ea7d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298251
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11644
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch will reset Deep S3 flag, hence S3 will work.
BUG=chrome-os-partner:40635
BRANCH=None
TEST=Build and Boot Kunimitsu and verify S3 is working.
Change-Id: Iad87b7a8f7bf560861a270a8c19153cfc3850bc4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbfaa29041be49e4c39d19cb94f01ad10d12c7d5
Original-Change-Id: I5ae1738c5de1bee1ad9a45ebde074a6a378492af
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297903
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This switches the final 4 Intel platforms that use ME firmware from
using code specific to the platform to the common IFD Kconfig and
Makefile.
braswell, broadwell, bd82x6x (cougar point & panther point) and ibexpeak
Change-Id: Id3bec6dbe2e1a8a90f51d9378150dbb44258b596
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10876
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The locate command was previously being used for x86 romstage
linking as well as alignment handling of files. The add command
already supports alignment so there's no more users of the
locate command. Remove the command as well as the '-T' (top-aligned)
option.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. Noted microcode being directly added.
Change-Id: I3b6647bd4cac04a113ab3592f345281fbcd681af
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that cbfstool supports XIP for romstage utilize it.
This removes the double link steps with the cbfstool
locate and add-stage sandwich.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I1ec555f523a94dd4b15fe8186cbe530520c622c0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11670
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of going through the locate then add-stage
dance while linking romstage twice allow for adding romstage
with --xip flags to perform the relocation while adding it
into CBFS. The -P (page-size) and -a (alignment) parameters
were added as well so one could specify the necessary
parameters for x86 romstage.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I585619886f257e35f00961a1574009a51c28ff2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The cbfs_locate_entry() function had a hack in there which
assumed a struct cbfs_stage data was being added in addition
to the struct cbfs_file and name. Move that logic out to the
callers while still maintaining the logic for consistency.
The only impacted commands cbfs_add and cbfs_locate, but
those are using the default 'always adding struct cbfs_stage'
in addition to cbfs_file + name. Eventually those should be
removed when cbfs_locate is removed as cbfs_add has no smarts
related to the cbfs file type provided.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I2771116ea1ff439ea53b8886e1f33e0e637a79d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to allow cbfstool to add XIP romstage on x86 without
doing the 'cbfstool locate', relink, then 'cbfstool add' dance
expose the core logic and of rmodule including proving an optional
filter. The filter will be used for ignoring relocations to the
.car.global region.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I192ae2e2f2e727d3183d32fd3eef8b64aacd92f4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11598
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The core logic of the rmodule parser is ideal for
processing romstage ELF files for XIP. To that
end start the work of exposing the logic from
rmodule so cbfstool can take advantage of it.
The properties that both need require:
- Single program segment
- Relocation information
- Filter relocation processing
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I176d0ae0ae1933cdf6adac67d393ba676198861a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11595
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There's no need to whine about missing files, so test for them first.
Change-Id: I906fd04a315de70340ce76d7c38eaaf88cc6580a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11642
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We build the coreboot utilities in a separate step as a minor
optimization. When logging in junit format (for jenkins), we want to
have a report on those as well (instead of an xml error).
Change-Id: Ibcd3b02bce9a314c30b5f7414e9e4cf0149ffd6a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11641
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Variable expansion made abuild create board..foo/bar, which are annoying
on jenkins' web UI because it doesn't cope properly with the empty
namespace between the dots. make it create board.foo/bar or
board.$class.foo/bar.
Change-Id: Ifa79cbfd1f263e11a458b3cc320baeed6a3fbc98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This is required the BLOB change Icb7a4f07
"AMD Merlin Falcon: Update to CarrizoPI 1.1.0.0 (Binary PI 1.4)"
This is tested on Bettong Alfa(DDR3) and Beta(DDR4). Both of the
boards can boot to Windows 8.1. PCIe slots, USB and NIC work.
Change-Id: Ibe141c16f8f9eac2adc5d5f45a1f354fb2a7f33c
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11148
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
This is required the BLOB change I67817dc59
AMD Steppe Eagle: Update to MullinsPI 1.0.0.A (Binary PI 1.1).
This is tested on Olive Hill Plus. The board can boot to Windows 7.
PCIe slot, USB and NIC work.
Change-Id: I605df26b61bdffabd74846206ad0b7bf677ebed1
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11225
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Trap handling code was bugged in that it loaded in the wrong stack
pointer, overwriting the space the processor uses to talk to its host
for doing device requests. Fix this issue, as well as add support for
handling misaligned loads the same way we handle misaligned stores.
Change-Id: I68ba3a114b7167b3212bb0bed181a7595f0b97d8
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11620
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Recently qemu stopped doing a basic lapic setup and expects the
firmware to handle this properly (like on real hardware). So
let's do that so coreboot works properly on qemu 2.4+.
Here is the qemu commit message for the change:
<quote>
commit b8eb5512fd8a115f164edbbe897cdf8884920ccb
Author: Nadav Amit <namit@cs.technion.ac.il>
Date: Mon Apr 13 02:32:08 2015 +0300
target-i386: disable LINT0 after reset
Due to old Seabios bug, QEMU reenable LINT0 after reset. This bug is long gone
and therefore this hack is no longer needed. Since it violates the
specifications, it is removed.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1428881529-29459-2-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
</quote>
Change-Id: I022f3742475d3f3477fc838b1e2bce69287b6b8e
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/11611
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We had two mappings of filetype IDs to strings. We shouldn't.
Change-Id: I08e478b92f3316139f14294e50ede657c7d5fb01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11626
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change was sitting in my git index, and I
failed to push it in the original patch.
Change-Id: If6f49c3c2b7908f93a99c23a80536ad5937959c7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11622
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Revive ffs() in a more fancy way (that is more likely to be accepted).
We dropped it in
7a8a4ab lib: Unify log2() and related functions
but there is at least one user: flashrom.
Change-Id: I4e3fc15816b778e640bceea0d89cd9624d271c2e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11591
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current endian API support in coreboot doesn't follow
any known API that can be shared in userland as well as coreboot
proper. To that end provide big and little endian helper functions
that can be used in code that can be shared within coreboot proper
and userland tools.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi
Change-Id: I737facab0c849cb4b95756eefbf3ffd69e558b32
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11618
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
FSP has some unique attributes which makes integration
cumbersome:
1. FSP header files do not include the types they need. Like
EDKII development it's expected types are provided by the
build system. Therefore, one needs to include the proper
files to avoid compilation issues.
2. An implementation of FSP for a chipset may use different
versions of the UEFI PI spec implementation. EDKII is a
proxy for all of UEFI specifications. In order to provide
flexibility one needs to binding a set of types and
structures from an UEFI PI implementation.
3. Each chipset FSP 1.1 implementation has a FspUpdVpd.h
file which defines it's own types. Commonality between
FSP chipset implementations are only named typedef
structs. The fields within are not consistent. And
because of FSP's insistence on typedefs it makes it
near impossible to forward declare structs.
The above 3 means one needs to include the correct UEFI
type bindings when working with FSP. The current
implementation had the SoC picking include paths in the
edk2 directory and using a bare <uefi_types.h> include.
Also, with the prior fsp_util.h implementation the SoC's
FSP FspUpdVpd.h header file was required since for providing
all the types at once (Generic FSP 1.1 and SoC types).
The binding has been changed in the following manner:
1. CONFIG_UEFI_2_4_BINDING option added which FSP 1.1
selects. No other bindings are currently available,
but this provides the policy.
2. Based on CONFIG_UEFI_2_4_BINDING the proper include
paths are added to the CPPFLAGS_common.
3. SoC Makefile.inc does not bind UEFI types nor does
it adjust CPPFLAGS_common in any way.
4. Provide a include/fsp directory under fsp1_1 and
expose src/drivers/intel/fsp1_1/include in the
include path. This split can allow a version 2,
for example, FSP to provide its own include files.
Yes, that means there needs to be consistency in
APIs, however that's not this patch.
5. Provide a way for code to differentiate the FSP spec
types (fsp/api.h) from the chipset FSP types
(fsp/soc_binding.h). This allows for code re-use that
doesn't need the chipset types to be defined such as
the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Change-Id: I894165942cfe36936e186af5221efa810be8bb29
Reviewed-on: http://review.coreboot.org/11606
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
RISCV requires the bios/bootloader to set up an interface by which it
can get information about memory, talk to host devices, etc. Put
implementation for spike in
src/mainboard/emulation/spike-riscv/spike_util.c, and
src/arch/riscv/trap_handler.c
Change-Id: Ie1d5f361595e48fa6cc1fac25485ad623ecdc717
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11368
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Execution in supervisor level code in RISCV requires early setup of
virtual memory. Add initialization calls in
src/arch/riscv/virtual_memory.c to implement the required page table
setup, and helper functions to use when jumping to the payload correctly
in riscv.
Change-Id: I46e080e0ee8dc13277d567dcd4bf0f61a4507b76
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11369
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
... the configuration is handled further below in the file by virtue of
select DRIVERS_UART_8250MEM
Change-Id: Ie5481d23cd3ac3561958fd100bd05c0e4b03ce00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Move some remaining ACPI init code to the SOC instead of being
done in each mainboard:
- acpi_create_gnvs is now a local function
- add a weak acpi_mainboard_gnvs() that can be used for mainboards
to override or set additional NVS
- add acpi_fill_madt() function for skylake
- remove acpi_create_serialio_ssdt() function as it is unused
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I52225e8d38ed846c29d44872e3f4d6ebaf4a7e52
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c717bb418a0cb6002582572632e42b44b473f718
Original-Change-Id: I0910ac8ef25de265ae1fde16b68f6cbacedb4462
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297800
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11581
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the acpi_tables.c functions so these functions can move to
SOC init code. The file itself is included by x86/arch code and
must exist for the build to succeed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: Ia9657f4a39c30ed7a0fd7ca4815bb2614f049911
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93ae87f2429af5cb9d497f8b5ef8b8dffe370df4
Original-Change-Id: Ifc2f64dc1693e7bd3f5a43144d84ff033b2cfe8b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297759
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11580
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the acpi_tables.c functions so these functions can move to
SOC init code. The file itself is included by x86/arch code and
must exist for the build to succeed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I18e6a0be5eac053598b613b30b622c4963417919
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: af04eb112adf58578c8d2c9d3d182d4c2024abb2
Original-Change-Id: Ibe026d493c25d771357ea39e4b956629fbb799ac
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297758
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11579
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove thermal.h as it is not used by this board.
Remove functions from acpi_tables.c so they can move to SOC.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-sklrvp coreboot (does not compile due to GPIO changes)
Change-Id: I934fcc451a722f853034c0970074ee3259cc704f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e3b5c0ed8295091d3d5761b8456f3c13c6bd8bc
Original-Change-Id: If855f598e895e38c58657af17130158b2f73de81
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297757
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11578
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Read and print the board ID if it is enabled in the mainboard.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I9d50089242b3a2f461dff2b1039adc8f0347179e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f245854b30c40eda38453c1b0ae5d3b8b18c010f
Original-Change-Id: Ifbd7c2666820ea146dc44fbc42bfe201cb227ff6
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297756
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11577
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Clean up the intel/kunimitsu mainboard code to match the code
and cleanups in glados. Many of these are trivial changes that
do not impact things in a meaningful way but will make it easier
to diff the code and keep the mainboards in sync.
- use relative path for mainboard includes to make porting easier
- fix trivial style issues to match glados so diffs are clean
- pull GPIO configuration into gpio.h and use from there
- remove thermal.h as it is not used on this board
- make info message BIOS_INFO instead of BIOS_ERR
- add support for SPD manufacturer and part number in SMBIOS
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I64a053bcec0e0ff25a57f65659f391ab64d9a11a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e47f0fd3e00a665f07098c7ea0018d51b105d1be
Original-Change-Id: Ib787f3ccc63115de48c4d608ca2bd81b58d24b6c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297752
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11576
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Select the EC PD and software sync kconfig options so they are
supported by the mainboard and call the EC early init function
to reboot into RO in recovery mode.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I48316df99b796c568c2481c72588b41f7147bec0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7507470f82848062bc98da809d3c5fe1ca31998
Original-Change-Id: I822aac9c24718f226819e5d3fcc82a4024b7c5a7
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297751
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11575
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Select the BOARD_ID_AUTO kconfig option to have the coreboot
tables populated with the board ID and print it early in
romstage as well. Also clean up the code for it.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I90bd85ef14543717287cbeaaab77e6c54b94df97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1fed7de4a0650a497a240b091fd2eb99d59e1433
Original-Change-Id: I82e9d17ab618b1aae1fd874d9247b7d52b42334d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297750
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11574
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Aaron Durbin