Commit Graph

426 Commits

Author SHA1 Message Date
Patrick Georgi d26053a10f Config-abuild.lb doesn't need to override ROM_IMAGE_SIZE.
Trivial change

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4555 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-19 14:08:42 +00:00
Patrick Georgi 0588d19abe Kconfig!
Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 15:00:51 +00:00
Patrick Georgi b339e10f04 Enable CBFS everywhere. All boards compiled for me (abuild tested),
and we will fix issues as they appear.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-11 17:35:02 +00:00
Myles Watson 42f75c325f Add pci_rawops.h from the mailing list and fix the via/epia-m700 build.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-07 17:54:26 +00:00
Michael Gold b70a45afd0 Add support for the Mitac 6513WU mainboard, a Compaq OEM board using the
i810 chipset. Not all hardware has been tested, but my test PC boots Linux
(via FILO) without any problems.

Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver.

Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05 19:29:39 +00:00
Uwe Hermann 328bccc610 Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial).
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).

In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:

Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c       (Revision 4393)
+++ src/devices/pci_rom.c       (Arbeitskopie)
@@ -87,7 +87,7 @@
        if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
                printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
                           rom_data->vendor, rom_data->device);
-               return NULL;
+               // return NULL;
        }

        printk_spew("PCI ROM Image,  Class Code %04x%02x, Code Type %02x\n",

The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...

Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-05 16:01:57 +00:00
Ward Vandewege 2468331952 Convert Supermicro H8DMR to CBFS. Also clean up some whitespace in
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb.

Importantly, this also sets

  default CONFIG_AP_CODE_IN_CAR=0

in

  src/mainboard/supermicro/h8dmr/Options.lb

which is required to make this box boot since the changes that went in in
r4315.

At Myles' suggestion, this patch also sets

  default CONFIG_USE_FAILOVER_IMAGE=0
  default CONFIG_USE_FALLBACK_IMAGE=0
  default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE

in src/mainboard/supermicro/h8dmr/Options.lb to simplify
targets/supermicro/h8dmr/Config.lb a bit further.

Build tested with abuild, boot tested on physical hardware.

Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02 18:27:02 +00:00
Thomas Jourdan 1a692d8176 Add support for the Intel Eagle Heights development board.
Signed-off-by: Thomas Jourdan <thomas.jourdan@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01 17:01:17 +00:00
Myles Watson 08405e7411 Fix abuild for via/epia-n. Trivial.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01 15:08:19 +00:00
Jon Harrison cfb9cd2f8a Ron,
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.

Patch should work against r4381 (or later ?)

This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)

The coreboot_table issue seems to have been automagically resolved by
the latest core files.

It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.

Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>

Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01 10:57:25 +00:00
Stefan Reinauer 9dd27bc03a the tool chain settings should not be in renamed (as they will never live in
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 17:13:58 +00:00
Stefan Reinauer 36f230eefb whoops. missed those two..
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4383 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 15:54:53 +00:00
Stefan Reinauer 0867062412 This patch unifies the use of config options in v2 to all start with CONFIG_
It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 15:17:49 +00:00
Uwe Hermann 3ddbfb8901 Add a target/ directory for the VIA EPIA-M700 board, so we can build it.
Note that this board is nowhere near usable, further patches will follow
and hopefully get this into buildable and usable shape.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4376 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-27 16:06:51 +00:00
Uwe Hermann 8c19f949fe Add support for the Soyo SY-6BA+ III board.
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots
Linux fine. Detailed status at:

  http://www.coreboot.org/Soyo_SY-6BA_Plus_III

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-24 00:35:07 +00:00
Uwe Hermann 6114311c8e Convert the MSI MS-6178 board to CBFS.
Also, enable HIGH_TABLES support for this board.

The HIGH_TABLES failed with:

  No matching ram area found for range:
    [0x00000000000f0000, 0x0000000000100000)
  Ram areas
    [0x0000000000000000, 0x0000000000001000) Reserved
    [0x0000000000001000, 0x00000000000a0000) RAM
    [0x0000000000100000, 0x000000000fff0000) RAM
    [0x000000000fff0000, 0x0000000010000000) Reserved
  SELFBOOT RETURNED!
  Boot failed.

The fix was to change northbridge.c as follows:

  - ram_resource(dev, idx++, 1024, tolmk - 1024);
  + ram_resource(dev, idx++, 768, tolmk - 768);

This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19 15:41:49 +00:00
Ronald G. minnich d41de2ea7a These changes implement car in qemu. The implementation is in several
ways superior to v3, while lacking its completeness. But, one nice 
thing: no more included .S or .c files. It's all separate compilation. 
That should allow our Makefiles to work much better.

Note that the current non-CAR implementation is the default and 
continues to work (tested FILO boot to Linux on both CAR and non-CAR).

Index: src/mainboard/emulation/qemu-x86/Config.lb
Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that 
depend on this variable are grouped in one if, and the other parts 
(romcc etc.) are in the else. This change is a model of how we should be 
able to do other motherboards.

Index: src/mainboard/emulation/qemu-x86/Options.lb
add needed options. 

Index: src/mainboard/emulation/qemu-x86/failover.c
remove code inclusion from this not-yet-used file. 

Index: src/mainboard/emulation/qemu-x86/rom.c
This is the entry point for the rom-based code. Called stage1.c in v3. 

Index: src/lib/Config.lb
change initobject to a .o from a .c; this fixed a build problem. 

Index: src/pc80/serial.c
make uart_init non-static. 

Index: src/pc80/Config.lb
add initobject

Index: src/arch/i386/init/entry.S
Entry point. Unify a bunch of files that were fiddly lttle includes. From v3. 

Index: src/arch/i386/init/ldscript.ld
new file. The goal is to hang all init changes for CAR here, to minimize other changes to any
other ldscript. Besides, putting this in init makes sense; entry and car are manage init. 

Index: src/arch/i386/init/car.S
generic i386 car code from v3. 

Index: src/arch/i386/init/ldscript_fallback_cbfs.lb
Fix what looks like a bug: this was not including the init.text section. 

Index: targets/emulation/qemu-x86/Config.lb
push up the console loglevel. qemu is for debugging so we might as well 
get all the debugging we can. 

Index: targets/emulation/qemu-x86/Config-car.lb
For CAR bullds. 

Signed-off-by: Ronald G. minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-16 15:02:52 +00:00
Uwe Hermann e8c6f86b80 Add (commented) line for VGA blob adding (CBFS version) to simplify things for users a bit.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4352 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-08 13:05:47 +00:00
Patrick Georgi 240ef7c769 Change the CBFS build process to use coreboot.rom
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.

This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.

Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
  crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
  as it's done everywhere else
- change the default config of abuild to not
  provide ROM_IMAGE_SIZE values for the images
  in a CBFS configuration
- change abuild's crosscompile autodetection to
  not try to use "i386-elf-i386-elf-gcc" (which
  is bogus)

Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS

The changes in util/abuild/abuild are trivial and
abuild tested.

As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 07:19:53 +00:00
Joseph Smith 41216225a1 rename the option CONFIG_PCI_OPTION_ROM_RUN_VM86 to CONFIG_PCI_OPTION_ROM_RUN_REALMODE.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4325 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 18:41:09 +00:00
Joseph Smith 60f0f1b18f enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbridge.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29 13:45:22 +00:00
Patrick Georgi a034dca42c Move coreboot_ram and coreboot_apc to CBFS. This allows to
reduce the size of the bootblock (done for kontron/986lcd-m)

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-27 14:19:31 +00:00
Myles Watson 54336fde0e Defaulting to the board's default size is the correct thing to do.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4294 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-21 15:12:39 +00:00
Myles Watson 1e6f6929c1 Trivial update of Config-lab.lb so that it works again.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4292 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-19 18:15:49 +00:00
Vincent Lim d12acea520 There were a few updates lately that generates ROM size > 512K. I am changing the default ROM size to 1M to accommodate this and future changes. I tested on SimNow family10h_1p.bsd and it POSTs OK.
Signed-off-by: Vincent Lim <vincent.lim@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4289 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-15 18:02:25 +00:00
Samuel Verstraete 459259e98d This is the final patch that got everything working for me with the HP dl145g3.
I would like to remind you that this firmware enables the hardware
virtualization on the AMD cpu's on the machine. That feature was
explicitly disabled by the factory BIOS.
Due to an error in the VGAROM no other rom loader (YABEL or X*^BIOS)
than SeaBIOS manages to load the VGA rom. The VGA ROM tries to read
config space of a device that is actually not present.
Because SeaBIOS does not support AHCI SATA it can not start the
bootable drive of the machine so i had to add filo to seabios to
manage booting:
./cbfstool coreboot.rom add-payload filo.elf img/FILO

Signed-off-by: Samuel Verstraete <samuel.verstraete@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-12 15:15:07 +00:00
Myles Watson 019b5f4230 I guess a couple of function calls pushed these boards over the 0x1700 edge on
the build server.

Add Config-abuild.lb to fix s2892 & s2891.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4274 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-12 14:14:54 +00:00
Myles Watson 8d27248682 Trivially copy Config.lb to Config-abuild.lb to fix asus/m2v-mx_se.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4273 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-12 14:03:12 +00:00
Uwe Hermann dcda7fd527 Fix manual build on the Kontron board (trivial).
A manual build was yielding section overlaps, so increase
ROM_IMAGE_SIZE to the same size the Config-abuild.lb is using.

Build-tested by me using a manual build.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-11 01:44:54 +00:00
Rudolf Marek c720795868 Following patch fixes the XIP computation issue. I removed the normal image
because it was not working anyway (it was hardcoded) and because it allows me to
fix the XIP base to something sane (and use generic computation and approach)

This board is bit tricky because until now it required the VGA BIOS on the flash
start. XIP will work with 64KB aligned base, therefore the VGA ROM image must be
aligned too to 64KB.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4265 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-10 20:35:18 +00:00
Joseph Smith aa1df9cba5 Trivial fixup IRQS on IP1000 and RM4100.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Joseph Smith <joe@settoplinux.org>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4260 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-08 00:45:47 +00:00
Stefan Reinauer 88e71e8859 Run dos2unix on all files:
find . -type f| grep -v svn | xargs dos2unix

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-02 12:42:30 +00:00
Joseph Smith 5252b1184a This patch changes the default rom emulator to VM86.
Signed-off-by: Joseph Smith <joe@settoplinux.org> 
Acked-by: Myles Watson <mylesgw@gmail.com>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4245 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-01 04:44:36 +00:00
Stefan Reinauer c7757f20ac * Use latest version of intel microcodes from their Linux drivers page for
models 6ex and 6fx (core and core2 solo and duo). Also, use the names suggested 
  by Intel for the microcode files instead our short version of it. This allows to
  create new microcode patches with a simple set of scripts.
* some minor cpu setup fixes for c and p states

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-30 10:14:22 +00:00
Stefan Reinauer a43ee75d9a increase image size
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4232 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-29 20:34:41 +00:00
Patrick Georgi 1670857cc9 Migrate via/vt8454c to CBFS.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-27 18:31:09 +00:00
Patrick Georgi bb2c61d844 Use pci_rom, as we have it. Thanks Myles!
trivial patch.


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4214 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-26 07:20:45 +00:00
Patrick Georgi b61bc7c68a Enable CBFS for qemu and kontron. Both are builds-and-runs
tested, incl. optionrom-in-cbfs for kontron, and compressed payloads
for both.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4212 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-25 22:15:29 +00:00
Myles Watson 72deb69ce1 Add VERSION to hp/dl145_g3. Trivial.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4195 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-23 13:41:12 +00:00
Stefan Reinauer d6196a494c fix compilation of hp dl145
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4188 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-22 22:43:02 +00:00
Mondrian nuessle 5b34bdd3e5 This patch adds the target hp/dl145_g3 together with
the appropriate mainboard sources.

Signed-off-by: Mondrian nuessle <nuessle@uni-hd.de>
Acked-by: Samuel Verstraete <samuel.verstraete@gmail.com>

I updated some whitespace and the Config files. - Myles


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4184 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-22 20:34:05 +00:00
Stefan Reinauer 7faa7d6bde increase rom sizes for abuild
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4178 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-22 15:49:28 +00:00
Patrick Georgi 2d3e712d56 Add an "-l <num>" argument to abuild that sets the LOGLEVEL variables
to the specified value.

Only change Config-abuild.lb, as the others are for manual buildtarget
use - adding __LOGLEVEL__ there would kill the build as it isn't
replaced by the actual content.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4153 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-21 20:31:18 +00:00
Uwe Hermann 1458228b2e Add support for the ASUS P2B-D mainboard.
This is a pretty standard "yet another 440BX" target, so the code
is pretty straight-forward. It's a dual-CPU machine, which might need
some fixing, I'm booting with 'maxcpus=0' for now. It does boot
successfully up to a Linux login prompt, though.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-18 14:02:00 +00:00
Stefan Reinauer aeba92ab5b Add VIA CX700 support, plus VIA vt8454c reference board support.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4126 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-17 08:37:18 +00:00
Stefan Reinauer 80775c1425 add Config-abuild for the new board (trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4081 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-07 14:27:38 +00:00
Ronald G. Minnich 308312ce6c Some changes for option roms:
- don't make users pick the name. Names for option roms are in the v3-defined
format of pci%04x,%04x.rom with the vendor and device id filling in the 
%04x. 
- users pass in vendor and device id. 
- users pass in a dest. If the dest is 0, the address of the ROM image in 
FLASH is returned. If the address is non-zero, then the decmpressor is called,
and it will make sure the ROM image is copied to the destination (even 
in the uncompressed case).

move qemu over to always using ROMFS

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4078 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-06 20:38:34 +00:00
Daniel Toussaint da6d92ba11 Daniel Toussaint wrote:
As I mentioned a few weeks ago, I am in the process of porting this board:

http://www.technexion.com/products/embedded_boards/tim-8690-mt.html

This board has a dual BIOS , choosable with a jumper - much like the BIOS
savier from before - so it is a pleasure to work with as a linuxbios developer.

It is still a work in progress, however , I already submit the patch.
All on board devices and slots work as expected, only need some more stress
testing with the RAM, acpi, etc..

Signed-off-by: Daniel Toussaint <daniel@dmhome.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4075 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-06 13:38:54 +00:00
Marc Jones 5dd4a20b96 Add Supermicro h8dm3 mainboard. This is mostly a copy from the h8dmr.
The one issues is the SPD address switch for the second CPU. That means that
the memory must be an exact match on each CPU.

Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-20 16:36:05 +00:00
Stefan Reinauer be7f79867e This, ladies and gentlement, is commit #4000.
Use the (almost) same strict CFLAGS in v2 that we use on v3. And fix a few
include files and missing prototypes. Also, fix up the Config-abuild.lb files
to properly work for cross compiling.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-13 15:42:27 +00:00