The DPTF parameters were defined by the thermal team.
Based on thermal table in 290705146#comment17.
BUG=b:290705146
BRUNCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I02b4187000eec9990bf10a57875b23007f7bdd12
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79183
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables the FSP (Firmware Splash Screen) rendering feature
for all Rex variants, including chromeboxes like Ovis. This will allow
users to see the FSP logo during the boot process.
BUG=b:284799726
TEST=Verify that the FSP logo is displayed during the boot process on
an google/ovis chromebox.
Change-Id: I73d82e16f70ffdc8cb168506c86d9c4e9a92c38d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The Genoa SoC has 6 I2C controllers. In order to support those, select
SOC_AMD_COMMON_BLOCK_I2C and implement the SoC-specific functions and
data structures needed by the common AMD I2C code. Since the common AMD
I2C code also reports if the controller is enabled or not in the SSDT,
change the corresponding DSDT code to use this information. In this
patch the I2C pad control registers don't get configured by coreboot yet
and we rely on ABL already having those set up correctly which seems to
be an assumption that the reference firmware is making too. PPR #55901
Rev 0.26 was used as a reference for the I2C controllers and the GPIO
pins being used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iebc10de6ea5c6d441cff04e016dcec62405078c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f00f00f00aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78866
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch tries to standardize and simplify the Kconfig option layout
for Google boards with MediaTek SoCs and align them to the scheme used
with other Arm-based Google boards.
Change-Id: I40880e7609ba703d0053ad01da742871e54d4e7a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79063
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
This patch unifies and simplifies the Kconfig selection model for the
Gru, Herobrine, Trogdor and Veyron boards according to the model
discussed in CB:78972.
Also add missing license headers to two Kconfig files while I'm here.
Change-Id: If679a05afd10869afba9c2a33b54862e102b5f40
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79022
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While transitioning the devicetree to make use of the chipset
devicetree, commit 3b5b9f4c54 ("mb/hp/280_g2: Make use of the chipset
devicetree") removed useful comments documenting the endpoints of the
root ports. Restore them.
Change-Id: I178cb472a8f40baaccc30514689bda2730dfa9dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some sensitive data may remain DMA buffer, we will want to zero out
everything on the DMA buffer before we jump into the kernel to
prevent leaking sensitive data into the kernel.
To accomplish that, we will need this function to get the range of
memory that can be allocated by the dma allocator.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I8f3058dfd861ed44f716623967201b8cabe8d166
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch guarantees that non-ChromeOS platforms continue to enable
early caching.
ChromeOS devices, on the other hand, control this configuration through
the motherboard configuration based on the underlying SoC.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex.
Change-Id: I412b2b6a807dc0f5f2632f0fbd56bd37689dead3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` config
option for select mainboards, as not all board variants may want to
enable this config due to underlying SoC dependencies.
Mainboards that attempt to enable early caching have exhibited soft
hangs while switching between pre-RAM and post-RAM phases. This patch
allows mainboards to choose to enable this option without enabling
it by default (which could cause boot hangs).
Furthermore, it reorganizes the configuration options under
BOARD_GOOGLE_BASEBOARD_REX in alphabetical order for better readability.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex and
intel/mtlrvp.
Change-Id: If380c2ecbee4f6437c3d58bfb55be076a4902997
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This partially reverts commit f493857c9b ("mb/google/brya/var/*: Set
dGPU/LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/brya (osiris), verify LAN MAC address programmed
correctly.
Change-Id: I4fb43b7212e67b5c38724baad572860bc45b558e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79150
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This mostly reverts commit 6c705e766f ("mb/google/puff/var/*: Set
LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/puff (wyvern), verify LAN MAC address programmed
correctly.
Change-Id: I558ae6dc1366d5a8a22e0383d7d597d15159df03
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Instead of using MSR IA32_PLATFORM_ID read the SystemAgent device id
to figure out the PC type. This follows the BWG which suggest to not
use MSR IA32_PLATFORM_ID for system identification.
Tested: Lenovo X220 still boots.
Change-Id: Ibddf6c75d15ca7a99758c377ed956d483abe7ec1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78826
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Now that those registers are only written once set the lock bit to
protect it from runtime changes.
TEST: Lenovo X220 still boots.
Change-Id: I4c56a3cb322a0e75eb3dd366808068093928e10c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Write MSRs that are in scope package only once by checking for the BSP
bit. While this improves performance a bit it also has the benefit
that registers can be safely locked down without the need for
semaphores.
TEST: Lenovo X220 still boots.
Change-Id: I43f5d62d782466d2796c1df6015d43c0fbf9d031
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Updating from commit id c59794a6:
2023-11-02 Nicholas Bishop sign_uefi: Support signing via pkcs11
to commit id f2b01bf0:
2023-10-27 Julius Werner firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
This brings in 66 new commits:
c59794a6 sign_uefi: Support signing via pkcs11
68d4aa4b sign_uefi: Skip private key check if it's a pkcs11 URI
6b9d624b sign_uefi: Pass each key path separately
483f65e4 sign_official_build.sh: properly show errors on loem issues
516ee7bc sign_uefi: Use named args instead of positional
0eec8e25 vboot_reference-sys: Switch from Command to bindgen::Builder
46f5aab8 image_signing: support multiple release names
f13af139 sign_official_build: Sudo invocation within bits of android signing
3f165374 futility: updater: Add optional serial number argument to --ccd
64379cc6 sign_official_build: add --debug flag
7160bf9f 2lib: Fix relocation issue when compiling locally with musl libc
0e27cdff vboot_reference-sys: Add vboot_host.h
2c82e73c Override use_apksigner FLAGS
b43469c7 futility/cmd_show: Support --publickey FW_VBLOCK
0eb4da96 tests/futility: Update kern_preamble.bin as kernel_part.bin
68a03355 tests/futility: Move test_show_vs_verify.sh into test_show_and_verify.sh
8daf1474 tests/futility: Move 'futility show' tests to a separate file
34190e3d futility: Exit with error when metadata hash verification not supported
967aa462 firmware/2lib: Fix function comment for vb2api_get_firmware_size()
f2b01bf0 firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
ef6d02df futility/vb2_helper: Add missing newline for error messages
886d13d7 PRESUBMIT: switch to cros format
ac2e1a75 host/lib: Decouple openssl headers from HOSTLIB
86ec05f7 futility: updater: Add help info for --quirks
2850244e futility: updater: Abort if the unlock_csme_* is used on a locked device
f1b5c88d devkeys: delete old unused firmware_bmpfv.bin
4444c5fe crossystem: Fix tpm_fwver for fwid < 12935
98ef339f 2lib: Prevent overwriting the value of fw_vboot2
c7517eb4 make_dev_ssd: support ChromeOS Kdump
8e3462cc tlcl: Increase the TPM_BUFFER_SIZE
740a2966 vboot_reference: Drop 'host' usage for 'internal' in flashrom.h
57877a44 vboot: Remove comments about physical dev switch
3401d16c 2lib: Fix typos, comments and formats
fdf52d45 scripts/: Drop deprecated {g,s}et_gbb_flags.sh scripts
bf76e9ee 2lib: Output the correct kernel_version
1ac4663e make_dev_firmware.sh: update pattern for matching wp status
c57ab9f7 2lib: Add recovery reason VB2_RECOVERY_WIDEVINE_PREPARE
e094ba31 tlcl: Reduce the variants of TPM2B
b047600d sign_official_build: support key config for pkcs11
f8712b73 vboot: support signing with pkcs11 private key
17fe786f strip_boot_from_image.sh: sfill fast
6c856cd3 futility/updater: Fix EC software write protection logic
1dc5a421 futility: update: Deprecate --unlock_me by --quirk unlock_csme_nissa
f0d88587 futility: update: Refactor the 'unlock ME' quirk(s)
81429ee9 futility: update: Do not update RO when the AP RO is locked
a3beb737 futility: update: Revise the ordering or quirks
2c1844fa futility: update: Remove unused quirk 'unlock_wilco_me_for_update'
75530d32 tests/futility: Test with new signer_config.csv based firmware updater
cba649fa 2lib: Expose 2hmac
ab015448 2lib: Refactor hmac to vb2_hmac_calculate
3545f8b4 Revert "sign_uefi: Remove exception catching"
55f625a9 dump_fmap: Add offset and size to flash_ec format output
a27ee336 keygeneration: add shellcheck source statements to help linting
055f9aa2 keygeneration: replace_recovery_key.sh: make minios key optional
6cb8ab60 scripts: delete unused values kernel command line
1f76c38b vboot: Drop phone recovery support
ccf6b037 scripts: Legacy fix for set_gbb_flags.sh
8f03069e futility: Add basic README.md
88963df8 utility: Query platform wp status with futility
6c3817d2 utility: Drop cros_alias technical debt in dev_debug_vboot
df85f512 scripts: Drop cros_alias technical debt in make_dev_firmware.sh
7395cd68 futility/updater_utils.c: Match on EC path to prepare for split
52518415 crossystem: Recover corrupted RW_NVRAM on flash writes
81f9ddaf futility/cmd_gbb_utility.md: Add basic GBB subcmd doc
c4995268 futility/: Fix define confusion
69dab5a6 crossystem: Avoid writing duplicate entries to RW_NVRAM
6c37b520 Revert "crossystem: stop supporting legacy chromeos_acpi driver"
Change-Id: Ic7ecdabcdd26df349b8abf1c5a77c806facfe1d8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78865
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check FW_CONFIG and disable gpios for HPS if HPS_ABSENT for skolas
and brya0 variants.
BUG=b:311740746
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify via "cbmem -c | grep HPS".
Change-Id: I8cbe4f40c41f1d06e8f511c3e88c05984566d441
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Check FW_CONFIG and disable gpios for LTE if LTE_ABSENT for skolas
and brya0 variants.
BUG=b:311459627
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify LTE gpios are disabled via "cbmem -c | grep LTE".
Change-Id: I3f3bc2b536babf71cc484cce02f96f47707f729c
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79122
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skolas uses brya0 schematic, so override tree should be almost the same
for brya0 and skolas. This change sync's the skolas overridetree.cb
with brya0's overridetree.cb.
BUG=b:311722825
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to
kernel.
Change-Id: I14a2ed803a8ffb8614018af587c66034fb724b38
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This changes the path where go installs its packages.
Now the packages are not installed in the users home directory anymore.
This solution is not perfect though, since offline build are still not
possible, because go will fetch the packages at build time.
-modcacherw will create the go files with rw permissions, otherwise
coreboot is not able to delete the files afterwards (make distclean).
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2a35369628454057ea4758cd1225e57f07cb71c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
ChromeOS has switched to using the main branch, update accordingly.
BUG=b:294218930
TEST=None
Change-Id: I31f67ef4fb175a4e4896b5bed81d5ae1cdddb827
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79143
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
In preparation for the upcoming release, add the template for the
24.02 release and update index.md.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I694142c31ba684e7b94640d55302b2440e25619a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79073
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the HD audio controller in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and audio still works
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I9bbbe9f4490dc6fb21174d63d1c8906d69ea3ee0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79118
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the PCIe root ports in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and all PCIe devices on PCH are
visible and working.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I05bfe8db88fd54415f320f32ea147636ca4e0df8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the integrated GPU is always function 0 of device 2 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and graphics works in UEFI
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I20e387e626e19dc441aceda18451186d1e86cd5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79114
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the host bridge is always function 0 of device 0 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: Icf3d9f8cd2be2f8ef71fd9fdb5f005f3b683332e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79113
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
While having select statements in Kconfig.name files is valid in the
syntax of the Kconfig language, having the selections split between the
normal Kconfig file and Kconfig.name files makes it harder to see what's
going on.
Kconfig.name files will now be limited to their original purpose of
selecting a particular board or board variant, not actually configuring
that board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2aab78e296f2958e77a938b1afa40a25a6aa82b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Brox is using Ti50, so make sure that we set the right config for that.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: If4a16448eebc028b2989c1de150b9e0f9067ee92
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Assigning the macros in gpio.h to the correct GPIOs. Also, fixing GPE
configurations so that they are mapped to the proper wake sources
(GPP_B, D, E groups).
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I6320cd98e560e514e63c52e173cb7923cfd1cdee
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
We need to increase romstage size a little to make a compiler upgrade
fit (CB:70771). Unfortunately the end of the romstage directly touches
the QCSDI region in the current memlayout, and there is no other way
to reshuffle things to make more space... so we need to move QCSDI out
of the way. This means that anyone who is actually building this
platform with CONFIG_QC_SDI_ENABLE (which requires a proprietary blob
that's not publicly available) will need to recompile their QCSDI binary
to match the new start address.
Change-Id: Iaf13e4001b3c763e3ec59009779931ec75603d5d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79074
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
These should be the final release notes prior to tagging coreboot
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id723f8e1fc92ef1a36e877f48e594eef59b0ba8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79077
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
These perl modules are needed to run the coverage-report target for
gcov.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If32a42ce17edcbae94394f770c26d3300abebcbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79072
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the vboot board list for the 4.22 release.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I77c5ca2c2c36d8b1ddadad4f15d2d4148ff0b325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I25b7adccf60abe515d129f8d00383165eccf6431
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79028
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I30a15277527a1e423691ff55ff11cc2136cefc90
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Building coreboot for the Qualcomm SoCs SC7180 and SC7280 requires to
include the Qualcomm blobs, which requires to accept their license.
However, for various reasons it makes sense to build without blobs, e.g.
static analysis or just build-testing.
So in order to do that, run the steps integrating the Qualcomm blobs
into the coreboot binary only if USE_QC_BLOBS is enabled and also remove
guards which prevent building related mainboards when USE_QC_BLOBS is
not enabled.
Change-Id: I249ac477b8f10e7fa0848e967c23a3b3b9bbd27d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79026
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the CPU and PCI domain operation bindings statically in the chipset
devicetree instead of adding them during runtime.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44fa57458c408e74a6341643620c5e9ac1817557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Since this chip is a SoC and also to bring the chipset devicetree more
in line with the chipset devicetree of Sandy Bridge, merge the chip
operations of the northbridge's root complex and the northbridge itself
into one chip operations structure and use it at the top level of the
devicetree.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b42bac07b1409bbc797bc4428cf9f84a40e94c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
BKDG #52740 Rev 3.05 was used as a reference for the SoC's various PCI
devices. The HDA controller in the FCH at function 2 of device 0x14 on
bus 0 was missing in the mainboard's devicetrees.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6970c2f6e6d661d40406586f4e6eeb05bcd07979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79083
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
There's no need to remove the corresponding fields from the
device_operations struct when HAVE_ACPI_TABLES isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iac20b6cdc44a5280566ee7003a5ef6fbe913b099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78990
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to remove the corresponding fields from the
device_operations struct when GENERATE_SMBIOS_TABLES isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa24d1fd211c263b788046e63de3dd5c54cba801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Van Chen