Remove the unused Kconfig values which specify the PDAT file, its
location and inclusion into the coreboot file system. Remove the code
in romstage which locates the pdat.bin file.
TEST=Build and run on Galileo Gen2
Change-Id: I397aa22ada6c073c60485a735d6e2cb42bfd40ab
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15205
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a bootblock which builds with C_ENVIRONMENT_BOOTBLOCK selected.
This is the first piece in supporting FSP 2.0. Move esraminit from
romstage into the bootblock. Replace cache_as_ram with
car_stage_entry.S and code in romstage.c
TEST=Build and run on Galileo Gen2
Change-Id: I14d2af2adb6e75d4bff1ebfb863196df04d07daf
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15132
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The use of HSUART0 on galileo requires early initialization of the I2C
GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1
on the expansion connector.
TEST=None
Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15010
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Allow the platform to override the input clock for the UART by
implementing the routine uart_platform_refclk and setting the Kconfig
value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk
routine which is disabled when UART_OVERRIDE_REFCLK is selected. This
works around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Pass the UART identifier to CorebootPayloadPkg
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: I9db1c31c3544d56b66f5a79ac8c3acee41788983
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14610
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add register access support using register scripts.
Initialize the USB PHY using register scripts.
TEST=Build and run on Galileo Gen2
Change-Id: I34a8e78eab3c7314ca34343eccc8aeef0622798a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14496
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Optionally relocate FSP into DRAM and then call FSP SiliconInit.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_FSP_ENTRY_POINTS"
* Add "select DISPLAY_HOBS"
* Optionally add "select RELOCATE_FSP_INTO_DRAM"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* FSP entry points are displayed and
* The message "FspSiliconInit returned 0x00000000" is displayed and
* The HOBs are displayed correctly and
* The message "ERROR - Missing one or more required FSP HOBs!" is
not displayed
Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13631
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the SoC specific routines to access the MTRR registers. These
registers exist in the host bridge and are not accessible via the
rdmsr/wrmsr instructions.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_MTRRS"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The message "FSP TempRamInit successful" is displayed
Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13530
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Add the code to enable debug serial output using HSUART1:
* Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1
* Note that the BIST value is always zero as validated in
esram_init.inc
* The initial TSC value is currently not saved!
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if serial output is present on HSUART1 at
115200 baud, 8-bit, no parity
Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13445
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Successfully invoke TempRamInit from the FSP binary:
* Don't relocate the FSP binary image
* Copy the FSP binary into ESRAM
* Specify Kconfig values to easily debug ESRAM and TempRamInit code
* Specify the FSP binary file location
* Specify the FSP binary image ID
* Specify where in the flash image the FSP image must reside
* Specify the FSP data file location
* Specify where to place the FSP data file in the flash image
* Specify where in the ESRAM the FSP image must reside
Test 1 on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select ENABLE_DEBUG_LED_FINDFSP"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if the SD LED is on indicating that the FSP.bin
file was properly located, The test fails if the SD LED is flashing.
Test 2 on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Remove "select ENABLE_DEBUG_LED_FINDFSP"
* Add "select ENABLE_DEBUG_LED_TEMPRAMINIT"
* Testing is successful if the SD LED is on indicating that the FSP.bin
file was properly located, The test fails if the SD LED is flashing.
Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13443
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires
that utils/xcompile/xcompile change the machine architecture from i686
to i586 to ensure that the Quark does not attempt to execute unsupported
instructions:
* Adjust Makefile.inc to add the RMU to the coreboot image
* Add code to enable the ESRAM
Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h
file from the EDK2 tree (https://github.com/tianocore/edk2.git) to
enable
easy differences and correct issues in coreboot that were found in EDK2.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_RMU_FILE"
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Remove power from the board
* Apply power to the board
* Testing is successful if the SD LED is on indicating that the end of
esram_init.inc was reached
Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13440
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
