Commit Graph

25288 Commits

Author SHA1 Message Date
Matt Delco b4cf849333 mainboard/google/eve: add vendor to subsystem id
The initial subsystem ID had a device ID but not a vendor ID.
This change adds the Google vendor ID to the subsystem ID.

Change-Id: I14897da115fd6f2ddd492b6c565bd23227197232
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/26987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-11 08:41:25 +00:00
Kyösti Mälkki a48433d39b selfboot: Move x86 quirk under arch
Making exceptions for some payload to be loaded near
and under 1 MiB boundary sounds like a legacy 16-bit
x86 BIOS thing we generally do not want under lib/.

Change-Id: I8e8336a03d6f06d8f022c880a8334fe19a777f0a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-11 08:33:54 +00:00
Shelley Chen 3e70690f2a mb/google/poppy/variants/nami: Add EC_ENABLE_TBMC_DEVICE
Add tablet motion control config to nami devices.

BUG=None
BRANCH=None
TEST=run evtest
     make sure tablet switch value is 1 in tablet mode and 0
     when not in tablet mode

Change-Id: Ie1480934dc003d9b467883e001ed89f9a3694d10
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/26970
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11 08:32:17 +00:00
Nick Vaccaro 0a2e39d260 mb/google/poppy/variants/nocturne: enable nvme
- configure GPP_B7 (PCIE_NVME_CLKREQ_ODL) for NF1
- enable root port 9
- add nvme register settings to devicetree

BUG=b:78122599
BRANCH=chromeos-2016.05
TEST='emerge-nocturne depthcharge coreboot chromeos-bootimage',
boot to kernel, and verify /dev/nvme* entries exist.
CQ-DEPEND=CL:1090070

Change-Id: I0070d33b1ed09bd1f51a680d92ddb7e2bcb1ebc2
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/26933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11 08:32:06 +00:00
Daisuke Nojiri abe73975f0 Fizz: Remove BJ adapter configuration
This patch removes BJ adapter configuration, which has been moved
to the EC.

BUG=b:109762580
CQ-DEPEND=CL:1089328
BRANCH=none
TEST=Verify BJ adapter is set expectedly on Teemo.

Change-Id: I3041b984e7f02624b94ba2713b084d001fa155f9
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1089370
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/26965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11 08:31:09 +00:00
Martin Roth 575f1d7784 crossgcc: Update to clang 6.0 & cmake 3.11.3
Change-Id: I1a0db60b527c2f7ffe77743c0d75b78a7c8bc4cc
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/26877
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11 08:28:55 +00:00
Elyes HAOUAS 4b73fa97ce mainboard: Get rid of device_t
Use of device_t has been abandoned in ramstage.
Use pci_devfn_t or pnp_devfn_t instead of device_t in romstage.

Change-Id: Ie0ae3972eacc97ae154dad4fafd171aa1f38683a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26984
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-09 17:24:07 +00:00
Elyes HAOUAS 5cb876cc1f mainboard: Get rid of device_t in ramstage
Use of device_t has been abandoned in ramstage.

Change-Id: I07e00afbbd2c19cf3ea6e08f228eb39e45f1ad0c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-09 16:39:35 +00:00
Elyes HAOUAS 7a5f77142f sb/intel/lynxpoint: Get rid of device_t
Use of device_t has been abandoned in ramstage.

Change-Id: I064ff5e76dd95c1770cd24139195b2a5fff2d382
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-09 16:30:37 +00:00
Elyes HAOUAS 91b7cb1b7a sb/intel/fsp_bd82x6x: Use pci_devfn_t instead of device_t
Change-Id: I775f5482970905134bb395b03845eb798d88d209
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-09 16:28:55 +00:00
Haridhar Kalvala 1cedc7e40f soc/intel/skylake: Enable low power S0Idle capability
This patch sets the ACPI FADT flag ACPI_FADT_LOW_POWER_S0
if S0ix is enabled for the platform.

BUG=b:79559085
TEST= Boot to OS and check the ACPI_FADT_LOW_PWR_IDLE_S0
      flag is set in FACP table - FADT.Flags[21] bit.

Change-Id: I0b8a86118232a66e7466d5b8116eff6087b51210
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Reviewed-on: https://review.coreboot.org/26940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-08 23:37:19 +00:00
Furquan Shaikh 4ca3a8abfa util/sconfig: Get rid of rescnt in struct device
This change gets rid of rescnt member in struct device since it is
redundant. "res" member can be used to determine if resource list is
present or not.

BUG=b:80081934
TEST=Verified that static.c generated with and without this CL is
exactly the same for all boards built using abuild.

Change-Id: I73a2361686ad1130716a7d29576f2d02b9ed33c1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-08 23:36:47 +00:00
Furquan Shaikh 931982600d util/sconfig: Re-factor device structure in parse tree
This change re-factors the device structure in parse tree to be able
to support multidev devices just like non-multidev devices.

With this change, every device has a bus under it which is the parent
of all devices that fall on the bus. If there are duplicate entries in
the devicetree, then there will be multiple buses under the device and
each bus will have its own set of children.

The tree starts out with a root device which has a root bus under
it. This is a special device which is created statically and its
parent is its own root bus. When parsing the device tree file, devices
get added under the root bus as children.

Since this change re-organizes the way devicetree is represented, it
gets rid of latestchild and next_sibling pointers from struct
device. Also, the tree traversal to generate static.c is changed to
breadth-first walk instead of using the next_sibling.

BUG=b:80081934
TEST=Verified using abuild that all boards compile successfully.

Change-Id: Ic8c8a73a247e8e992ab6b1b2cc3131e06fa2e5a1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-08 23:36:02 +00:00
Furquan Shaikh 7398deda2b util/sconfig: Make queue handling more generic within main.c
This change updates queue handling routines to be more generic so that
it can be used by more than just chip queue. Additionally, it provides
functions to dequeue element from head and peek head of a queue which
will be used in a follow-up commit.

BUG=b:80081934
TEST=Verified that abuild compiles successfully for all boards.

Change-Id: Ibd2de85b48c5d4e2790bf974ea3bb1bd387f66ee
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-08 23:35:54 +00:00
Martin Roth b8a05e29ac mainboard/google/kahlee: Turn on backlight for all SKUs
Careena uses a different keyboard backlight method, so let the EC
handle the different SKUs and backlight methods.

BUG=b:80106042
TEST=None

Change-Id: I47f7a9ac13538f0216fbb0f64fdd22f66097820c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-06-08 18:49:03 +00:00
Martin Roth c24e4a456f src/mainboard/kahlee: Use common mainboard and romstage files
Until these need to be separated out, use a common file for mainboard
and romstage to make upkeep easier.

BUG=b:80106042
TEST=Build Grunt and Careena

Change-Id: I65188bee1958d442bfe64637c3b93dc05583a686
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-06-08 18:48:40 +00:00
Patrick Georgi 78e09f9622 southbridge/intel/lynxpoint: add hard_reset to postcar
This fixes the following failure on certain google/peppy configs:

    build/postcar/lib/reset.o: In function `__hard_reset':
    /home/pgeorgi/coreboot/src/lib/reset.c:24: undefined reference to `do_hard_reset'

Change-Id: I448a8702a30108f1fc82179a766cbdd209336df7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/26986
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08 18:01:22 +00:00
Martin Roth 6985a7b7d6 mainboard/google/kahlee: Use 66MHz SPI clock for fast read
Looking at the 100MHz signal, we were violating the timing requirements.
66MHz still isn't great, but it's a good tradeoff between improving
the signal and losing boot speed time.

This slows down the boot time by about 20mS.

BUG=b:109583457
TEST=Boot grunt, look at signal on scope

Change-Id: I7ce70c992822dd17c5877226e74c1890660768c6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-06-08 16:12:54 +00:00
Maulik V Vaghela 82e8c69a56 sconfig/main.c: Fix number of arguments in fprintf
During compilation sconfig/main.c gives an error regarding number of
arguments passed in fprintf.

BUG=none
BRANCH=none
TEST=check if compilation warning has been fixed

Change-Id: Ia769cc606a1e3f7e1188cd82235442493d37f664
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/26972
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08 06:17:53 +00:00
Kyösti Mälkki c8cf591ee8 arch/x86: Drop leftover ROMCC console support
Change-Id: I3e52569a34e1f7bfea8be9da91348c364ab705e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-08 03:31:12 +00:00
Furquan Shaikh 5ad79cdf2f util/sconfig: Get rid of unused parameter to walk_device_tree
This change gets rid of unused 3rd parameter chips to the function
walk_device_tree.

BUG=b:80081934
TEST=Verified that abuild compiles successfully for all boards.

Change-Id: I255ff030562073b16310fc22a0981808bf2c062f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-08 03:29:37 +00:00
Nico Huber f2dd0499b6 libgfxinit: Enable G45 support (for GM45/X4X)
Change-Id: Ia637d32ffaa5d280320955d34141eddc8b7df981
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22222
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08 03:27:37 +00:00
Arthur Heymans b00bac707f 3rdparty/libgfxinit: Update submodule pointer
Update to current master.

This includes:
- G45 support
- fixes scaling on eDP (needed for working textmode on eDP)
- gfx_test drawing and moving cursors
- Adding support for Tiling on <= Haswell
- Allow changes to the framebuffer configurarion without resetting the
pipe.

Change-Id: I4ff3c17ec7308115de7bf2f2bb9276c2fad41253
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26823
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08 03:27:23 +00:00
Daniel Kurtz de5e4c9982 mb/google/kahlee: Configure EC_PCH_WAKE_L as an SCI source
Configuring EC_PCH_WAKE_L as an SCI enabled GPIO allows the EC to wake
the AP from S3 on keyboard presses.

BUG=b:109759838
TEST=(1) powerd_dbus_suspend
     (2) press a key on the internal keyboard
   => system resumes from S3

Change-Id: I30f72460fd588706f91f4fc3ea4ff007c96e9ebe
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/26931
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08 03:26:59 +00:00
Daniel Kurtz 95cb1e72d7 amd/stoneyridge: Set SCI_MAP for SCI enabled GPIOs
By default we use a 1:1 mapping between GEVENT bits and the corresponding
SCI_MAP entry.  However, we still must program the SCI_MAP entries
with the GEVENT number.

BUG=b:109759838
TEST=(1) powerd_dbus_suspend
     (2) move finger on touchpad for ~1 second
   => system resumes from S3

Change-Id: Ie7be45264f9bfec56efc47a03071fdb924d16b6a
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/26930
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08 03:26:51 +00:00
Furquan Shaikh 1313244ae7 mb/google/octopus: Fix GPIO to GPE mappings in devicetree
Change b41ae2 (mb/google/octopus: Enable wake-over-wifi for octopus
variants) changed the GPE mappings to accomodate for WiFi wake
pin. However, this resulted in TPM interrupt pin being removed from
the GPIO to GPE mapping. Since we do not support true interrupts in
coreboot, GPE_STS registers are used to identify if an interrupt has
triggered. Change in GPE mapping resulted in this information to be
lost when talking to TPM thus resulting in "Timeout wait for tpm
irq".

This change fixes the above issue by assigning GPIO block for TPM
interrupt back to DW1 and moving GPIO block for wake-over-wifi pin to
DW3. DW3 was mapped to NW_31_0 which only has debug header pins and
CNVI pins (none of them are used for reading GPE_STS or as wake
sources).

BUG=b:109824918
TEST=Verified that there are no "Timeout wait for tpm irq" messages
when talking to TPM.

Change-Id: I30768177a838a684948f7485d760c8b83c3190f7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2018-06-07 23:46:01 +00:00
Subrata Banik 9cd99a1524 soc/intel/common/pch: Add pch lockdown code
pch lockdown functionality can be used by supported PCH.
Right now pch lockdown functionality is applied for SPT
(Skylake SOC) and CNP(Cannon Lake SOC) PCH.

BUG=b:78109109
BRANCH=none
TEST=Build and boot KBL and CNL platform.

Change-Id: I0b81bbc54f737cb4e7120f44bbe705039b45ccb3
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/25688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07 21:58:19 +00:00
Naresh G Solanki 6994bfefb5 mb/google/poppy: Select right TPM interface
TPM over SPI/I2C config selection got changed in
https://review.coreboot.org/c/coreboot/+/24903 so this CL is fixing the
same.

BUG=None
BRANCH=None
TEST=Build for Soraka & make sure that TPM is probed over I2C interface
rather than SPI.

Change-Id: I077e4dc03520e26eb9f6404a7eb1edd99925de77
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/26890
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 21:57:42 +00:00
Martin Roth 2819a40ed3 Makefile.inc: Skip -fconserve-stack flag if running scan-build
Scan-build refuses to run if the -fconserve-stack flag is added to
cflags.  It fails with the cryptic message "could not find clang line".

Change-Id: Ib1b56ef7d217138a1a195fe993d8e8dd965bd855
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/26878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-07 16:38:08 +00:00
Amanda Huang 07a803db77 mb/google/poppy/variants/nami: Disable rear camera/DMIC for Sona
Since there are two cameras on Nami and only one camera on Sona.
We need to disable rear camera/DMIC on all Sona sku.

BUG=b:109710674
BRANCH=master
TEST=Verify if only front camera/DMIC shown on Sona

Change-Id: Id84ee22c9ffc15db78be3bbad148af5cd7dc866e
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07 16:37:20 +00:00
Amanda Huang cd27b8d511 mb/google/poppy/variants/nami: Disable rear camera/DMIC for Pantheon
Since there are two cameras on Nami and only one camera on Pantheon.
We need to disable rear camera/DMIC on all Pantheon sku.

BUG=b:109720689
BRANCH=master
TEST=Verify if only front camera/DMIC shown on Pantheon

Change-Id: Ibe48a945dc57f2c05344479253040ad1945d92fd
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/26875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-07 16:36:58 +00:00
Patrick Georgi b892f1ac5d Documentation/release: Add some of the things we added since 4.8.1
From here on, changes should directly touch the release notes, but these
are notable, too.

Change-Id: I602d67f8dd38391663094212cdb4609cdad458ee
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/26886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-07 16:35:34 +00:00
Nico Huber 4a00ccc748 console/hw-debug_sink: Do not cache state of log level
As we suppress output now before console_init() is done, the log level
read at start of ramstage is always -1.

Change-Id: Ia078d647c47aaa41ca9f2df9cf8506148ef86538
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/26832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-07 16:35:20 +00:00
Patrick Georgi 5ce400178a Documentation: inject the current git revision into the website
Change-Id: I79cceca7373f8bdf9bbfba5d84b8fa589afa838b
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/26897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-07 15:10:43 +00:00
Patrick Georgi c57eeb9c8c util/docker/doc.coreboot.org: Add git to the image
Required to get a current version string onto doc.coreboot.org

Change-Id: Iac54c4be2d4e783b7bf9ed529a431e72c67abab7
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/26896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-07 15:10:25 +00:00
Patrick Georgi 9101608e85 util/docker: rename docs.c.o to doc.c.o
Make the directory name match the name of the subdomain.

Change-Id: I2dcf2385e6d953b7fe02caef72413149a332ec24
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/26887
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 15:10:17 +00:00
Patrick Georgi aefbc46a05 util/docker/docs.coreboot.org: reduce container size
We don't need the .deb files in the image forever

Change-Id: I67a56faf8f9466e5162f7662708a5abb2971d2f9
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/26895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-07 15:08:58 +00:00
Patrick Georgi 6e25feff70 util/docker/docs.coreboot.org: Downgrade sphinx
Sphinx >= 1.6 can't use recommonmark. debian/stable is ancient enough to
have an older version.

Change-Id: I287deab9168ab6124b05d0c6d6e8cdbd7fdc2eec
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/26699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-07 11:33:15 +00:00
Tristan Shieh 362a734091 mediatek: Move uart, timer and cbmem code to a common directory.
This patch moves uart, timer and cbmem code which can be reused into a
common directory under soc/mediatek.

BUG=b:80501386
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
     of the patches applied) and Elm platform

Change-Id: I5210149b324947ee90f1a481b42f0e2e1f7cfc25
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/26658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-06-07 11:08:48 +00:00
Tristan Shieh 4c8d4872a5 mediatek: Refactor to sharing code among similar SOCs
This patch refactor cbmem and timer code which will be reused among
similar SOCs.

BUG=b:80501386
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
     of the patches applied) and Elm platform

Change-Id: I397ebdc0c97c7616bd547022d2ce2a8f08f3c232
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/26881
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 11:08:17 +00:00
Tristan Shieh f42db110d0 mediatek: Refine whitespace and formating changes
This patch fix whitespace and formating issues:
1. Using two spaces between code and single line comment.
2. No space after asterisk.
3. Fix checkpatch error.
4. Remove spaces after cast operators.

BUG=b:80501386
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
     of the patches applied) and Elm platform

Change-Id: Ib36c99b141c94220776fab606eb36af8f64f65bb
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/26880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-07 07:42:43 +00:00
Mike Banon 794284ff0e tint: change the tint download link from HTTP Debian to HTTPS FSF
Last time there was a request to change a link from HTTP to HTTPS, also
it seems more ethical to use a link to the Free Software Foundation
server. SHA1 is the same - 7fcaa428c6d0de7096d1e4fbfd14848096ae5aad.

Change-Id: I55147ee2668de03ba6e9feb84936de24b2a001df
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-07 06:46:02 +00:00
Mike Banon 9829b6f408 tint: fix the "Paused - Press any key to continue" message for pause
Earlier this message has not been shown even at the corner of screen.
This fixes it by refreshing the screen, and moves it to the center.

Change-Id: If4e33e884c00c17f19ab330167d9293c8396ff3e
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-07 06:45:10 +00:00
Mike Banon f8b54b6315 tint: make it possible to reboot by pressing 'q' key two times
Earlier it was impossible to exit without pressing the power button.

Change-Id: Ia56d639fa8e563047fb3d2723695626a449ead40
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23853
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 06:44:35 +00:00
Arthur Heymans 4bdfebd4d8 nb/intel/pineview: Enable and allocate 8M for TSEG
TSEG can be used as a stage cache and SMM can be relocated here.

Change-Id: Ifa3acce57f0c13eee326b7c203a43453c74c3161
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/25593
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 06:42:14 +00:00
Arthur Heymans e07df9d783 nb/intel/i945: Enable and allocate 8M for TSEG
TSEG can be used as a stage cache and SMM can be relocated here.

Tested on Intel D945GCLF, still boots.

Change-Id: I0da5a00c98c4c4fb309b2691dc1d4645eb35b4fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/25592
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 06:41:47 +00:00
Mike Banon a16cffe480 tint: upgrade the outdated tint payload from 0.03b to 0.04+nmu1
Fixes two buffer overflows and opens a road to further improvements.
All the previous adjustments to libpayload_tint.patch (including the
latest "use the current time as random seed") have been preserved.

Change-Id: I22e65d18a0b1551f7049c4afe7f95868f584cf9b
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/23852
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 06:41:17 +00:00
Arthur Heymans f6d14773b2 nb/intel/i945: Add a common function to compute TSEG size
This adds a common function to decode the TSEG size from the ESMRAM
register. This will come in handy when SMM in TSEG is implemented.

This function is used both in romstage and in ramstage.

Change-Id: I4e163598752fb6cd036aec229fce439ebad74def
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23448
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 06:40:55 +00:00
Naresh G Solanki 20c893e82c arch/x86/smbios: Conditionally call SMBIOS ops
Check whether device is enabled before calling smbios ops.

BUG=None
BRANCH=None
TEST=Build & boot Soraka.

Change-Id: I79681c10679e1de3a2d177503f29239968d0c157
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/26864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07 06:38:07 +00:00
Naresh G Solanki 64af41d3db google/chromeec: Set proper dev ops
For enable_resource & set_resource, use default DEVICE_NOOP so that they
are not reported as missing during enumeration.

BUG=None
BRANCH=None
TEST= Build & boot soraka.

Change-Id: I0fcfb8df39c6313c8a5bab5b780a8ffa7531d210
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/26869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07 06:37:12 +00:00