There are no quad-core CPU models with fam14, \_SB.C002 and .C003 get
removed from ASL.
Change-Id: I96df5b3f93c2dd6a05d5693069b991ca01f71d73
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The checking register will be cleared after EC resets, so we move
bustracker dump from ramstage to bootblock, before triggering EC reset.
TEST=bustracker shows status before watchdog resets
BUG=b:207743045
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There will be no log in cbmem if we trigger ec reset on bootblock
stage. Therefore, call dcache_clean_all() before triggering ec
reset to flush cache to store logs on cbmem.
BUG=b:207743045
TEST=show logs on cbmem
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The patch enables cse_fw_sync() before DRAM initialization.
cse_fw_sync() sends HECI commands in order to set CSE's boot partition
and to trigger CSE firmware update.
As part of CSE firmware update, coreboot sends HMRPFO_ENABLE HECI
command. Since CSE supports the command after DRAM Initialization,
cse_fw_sync() is called after DRAM initialization.
Starting from CSE Litev16.0.15.1545, CSE support HMRFPO_ENABLE command
before DRAM initialization too. So, cse_fw_sync() is called before DRAM
initialization.
BUG=b:175516533
TEST=Dependency with CSE Litev16.0.15.1545 integration
Change-Id: Iad7403650df8bc4e40aa6e48ccfeba95a5789a2d
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55364
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage
the same logic (to skip 2nd SIPI and reduce delay between
INIT and SIPI while perform AP initialization) even on
newer Intel platform.
Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename pcicfg to pci_map_bus and add prototype for the platforms not
supporting ECAM.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id9517c5ec4fa6b7c7a34552bfdc6d509927f6730
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Only scan one device if it's a PCIe downstream port.
A PCIe downstream port normally leads to a link with only device 0 on
it. As an optimization, scan only for device 0 in that case.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id184d03b33e1742b18efb3f11aa9b2f81fa03806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There was a duplicate PCI 0:14.4 device in ASL. Only
keep one.
There are no PCI devices 0:2.0 or 0:3.0 on fam14 northbridge
for graphics. There are no PCIe root ports 0:9.0 or 0:a.0.
Change-Id: Ifa8abb851f8ae4863b2c6d52224d287fd272048d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The section is the same and at root scope.
Change-Id: I3b3ff2fddc7d4db09903151bcb92e3e1b5dc7d69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The SMMSTORE_IN_CBFS option was just meant as a workaround for an
attempt to backport SMMSTORE into older Chromebooks that never actually
happened. All current and future users of coreboot should be using
SMMSTORE in an FMAP region. The APIs needed for SMMSTORE_IN_CBFS clash
with the CBFS rdev isolation needed for CBFS_VERIFICATION, so let's just
get rid of it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia0604a4ffd20b46774631d585925311b65d5a0e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59680
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Dumped using inteltool from the Dell BIOS version A30.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifdc41a1e6627b68813fb264aed7e30df58fc6d54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59525
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable PS/2 data and clock isolation in order to properly initialize
the PS/2 keyboard and mouse in payload/OS. These bits are set by OS via
ACPI and can survive S5 state. It is necessary to clear them after an
ungraceful shutdown in order to perform PS/2 controller initialization
e.g. in SeaBIOS.
TEST=PS/2 keyboard can always be successfully initialized in SeaBIOS
on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iac6be095c996b357b5d4e8d75199f94a89bf73e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable PMEs and clear global PME status to avoid undesired wakeups
or hangs in later stages. These bits are set by OS via ACPI can survive
S5 state so it is necessary to set them back to defaults after an
ungraceful shutdown.
TEST=Dell OptiPlex 9010 does not hang anymore after ungraceful shutdown
when configuring GPE0_EN register in southbridge LPC init
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I790cac3ce1101565b64ed54d9c6b50f5e9aa4cf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IA32_FEATURE_CONTROL does not need to be checked by BIOS, in fact these
bits are needed only by SENTER and SINIT ACM. ACM ENTERACCS does not
check these bits according to Intel SDM. Also noticed that the lock bit
of IA32_FEATURE_CONTROL cannot be cleared by issuing neither global
reset nor full reset on Sandybridge/Ivybridge platforms which results
in a reset loop. However, check the IA32_FEATURE_CONTROL SENTER bits in
ramstage where the register is properly set on all cores already.
TEST=Run ACM SCLEAN on Dell OptiPlex 9010 with i7-3770/Q77
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie9103041498f557b85019a56e1252090a4fcd0c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
There is no real code or feature dependency on
CPU_INTEL_FIRMWARE_INTERFACE_TABLE for Intel TXT.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2858c8de9396449a0ee30837a98fab05570a6259
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Although TXT specification says to do power cycle reset if TXT_RESET
is set, all Intel provided implementations issue a global reset here.
TEST=Perform ungraceful shutdown after SENTER to trigger SCLEAN path
on Dell OptiPlex 9010 and successfully call ACM SCLEAN.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8ee2400fab20857ff89b14bb7b662a938b775304
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Allow to set global reset bits on other platforms which enable
SOUTHBRIDGE_INTEL_COMMON_ME. In certain Intel TXT flows global reset
instead of full power cycle reset is needed.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I561458044860ee5a26f7d61bcff1c407fa1533f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently there is only a function that dumps GETSEC CAPABILITIES.
Add dumping GETSEC PARAMETER for completeness and additional debug
information.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3b2c8337a8d86000a5b43788840d15146b662598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Region device is no longer used to locate BIOS ACM. Use new CBFS API
to map and unmap the file. Using rdev_munmap on the uninitialized
region device variable causes the platform to jump to a random address.
TEST=Dell OptiPlex 9010 does not raise #UD exception when Intel TXT is
enabled, ACM SCHECK is successful
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I98afba35403d5d2cd9eeb7df6d1ca0171894e9d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Implement the chipset production fuse state reporting as described in
the Intel TXT Software Development Guide. Also fix all occurrences
where the production fuse state is checked.
TEST=Dell OptiPlex 9010 with i7-3770/Q77 reports the chipset is
production fused
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic86c5a9e1d162630a1cf61435d1014edabf104b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59514
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of maintaining two complete Makefiles, reuse the coreboot
build system rules in the stand-alone Makefile.
Change-Id: I5d894a1f079799478bce0bd200ac735097f3806b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59669
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TXT BIOS Data region version is checked by Trusted Boot code. Older
versions of TBoot (e.g. 1.8.2) may refuse to set up the MLE if BDR
version is not known. Provide an option to set the BDR version in
case an older TBoot code is used. This is very useful for platforms
with TPM 1.2.
TEST=Set BDR version to 4 and successfully boot QubesOS 4.0 with
TBoot 1.8.2 on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic2550bd4008559bd47de9e35f8b1c7b52e6e0f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Include DPR in the memory map calculations if enabled. DPR is required
for Intel TXT support.
TEST=Boot Debian 10 and see the DPR memory being reserved in E820 and
cbmem logs:
"BIOS-e820: [mem 0x000000007fc09000-0x00000000829fffff] reserved"
"TSEG base 0x80000000 size 8M"
"DPR base 0x7fd00000 size 3M"
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia22e49ba58709acfa0afe0921aa71d83cc06c129
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There is no support for SD card on Corsola reference board, so
we add a configuration to disable SD card initialization to
prevent setting GPIOs in a mistaken way.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia05fd046335c6ce6f9198ddbb7cbda2afc6ae3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
On Chromebooks the RAM code is implemented by the resistor straps
that we can read and decode from ADC. For Corsola the RAM code can be
read from ADC channel 2 and 3.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I485c32dec7b425b604b4063d742a0e37d3961513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Raise little CPU to 2GHz at romstage.
TEST=check little core cpu frequency is 2GHz
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The types of pwrap_read_field()'s return value and pwrap_write_field()'s
`val` argument are u16, so correct the usage in MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com>
Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some boards with the chrome EC will need to support more than 4
temperature sensors, so modify the number of TSRs supported when
generating the ACPI code. Note that the EC memory map already has
support for up to 16 TSRs, so no change is required on the EC
side.
BUG=b:207585491
TEST=with previous patch and some test data in brya0 overridetree.cb,
dump the SSDT and verify that all of the existing Methods for TSR0-TSR3
are also added for TSR4, as well as all Notify, etc.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id002230bc872b0f818b0bf2b87987298189c973d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59633
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some boards may use more than 4 temperature sensors for DPTF thermal
control, so this patch adds support for one more temperature sensor.
BUG=b:207585491
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ibf9666bade23b9bb4f740c6c4df6ecf5227cfb45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Kano EVT will exchange i2c port for touchscreen and cr50.
BUG=b:195853169
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Ensure that the separate Makefile doesn't break.
Change-Id: I0fbe37dc01e46022c5e6de5629eb99f6b86b0b14
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Commit f1e401c6cb (util/cbfstool/flashmap/fmap.c: fix fmaptool
endianness bugs on BE) makes use of endianness conversion macros
in cbfstool's FMAP code, which is also used by ifdtool. At least
on Linux, the <endian.h> header provides these helpers, but only
when `__USE_MISC` is defined, which is defined in the <ctypes.h>
header when `_DEFAULT_SOURCE` is defined. This was accounted for
in `Makefile.inc`, but not in `Makefile`. As a result, trying to
build ifdtool as a standalone tool (i.e. not as part of building
a coreboot image) results in build errors because the endianness
conversion macros are not defined.
Define `_DEFAULT_SOURCE` in `Makefile` to fix the build errors.
Change-Id: I8c2bbc07ddd87d885e2d6f5c7f2bd501e5c4e3b0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59663
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In different sku, some unused GPIO pins are processed by NC for power
consumption.
BUG=b:196790249
TEST=emerge-brya coreboot chromeos-bootimage and check power
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enabling crashlog helps partners to debug hang issues efficiently.
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in
depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble
Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move to building the latest U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I33fcfc3135e55d16b0dcd8135217bd5adcef2099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
U-Boot normally runs with a display if available. Enable this option so
that the display shows if U-Boot supports it.
Use 'select' rather than 'imply' since the CI complains.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ie5684c6ead30076689f43034675ff9f3531970fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
At present the default ROM for for QEMU is too small for U-Boot to fit.
Add a condition to catch this and expand it to a 1MB ROM. This allows
booting U-Boot under emulation.
It also matches the size used by other emulation boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
At present U-Boot crashes on entry as the start address is wrong. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I65e32fbb4ffea04b99abe4dc5afccfacd06c986e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
We don't need all the git history. Speed up the build by doing a shallow
clone.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: If31c9dd158aa23f242e4fd145449ef7502fb1ab1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The u-boot.bin file should be used, rather than u-boot-dtb.bin
While they are often the same, the -dtb version is really just for
legacy use now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I5558ed94c7dd6cc57ceb835fe367bfa050ad2150
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Kyösti Mälkki