Set the default CBFS size to cover the whole BIOS region.
Change-Id: If719a9cd2897d933df53bd423e71503b832411fe
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
1. Configure GPIOs as per schematics
2. Add 1 Ports and 1 Endpoints
3. Add support for OTVI5675
WFC is on I2C5 with VCM support and using 2 data-lanes
BUG=None
BRANCH=None
TEST=Build and Boot jslrvp board and able to capture image
using world facing camera.
Change-Id: I07ae9e3473c16bde8eb1597460e70cc478357b98
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Current Interrupt setting use 2nd parameters as device function number.
Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
Reference:
- ACPI spec 6.2.13 _PRT
BUG=None
BRANCH=None
TEST=Build and boot JSLRVP Verify Interrupt mappings are same as PCI
INTR(0x3C) register and no interrupt storm is seen
Change-Id: I21462c6befea310a49eecf9ad1b5c8770eccd5bd
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41404
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert the remaining files in src/drivers to use SPDX identifiers.
int15.h and default_brightness_levels.asl did not have license headers,
but they were both copied from other GPL2 files, so they should be under
the GPL2 as well.
ne2k.c and drm_dp_helper.h are licensed under custom BSD-like licenses
that do not have an SPDX equivalent, so they are added as exceptions
to the license header lint.
Change-Id: I87fb1c637b8d11b0463f7c19f70b847413e14aed
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Also adjust a few comments to follow the style guide.
Change-Id: I22001320f2ce1f0db348e0f7fabc5a65b50ba53e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Other files in the tree use such license. I first added this file.
Change-Id: I338654ec022bd6f2fa4a4381a8f27d024605e79d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The X230, like its larger cousins, has a docking connector. However,
it lacks the "docking_supported" flag in devicetree, so add it.
Change-Id: I188045e4cf9bbb0f2d434b353b84223470c951b9
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41510
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this patch, the ThinkLight on the ThinkPad T400 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T400 to test this.
Change-Id: I377854d6f54c5459e44626a7d7b61c513268183e
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T430S can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T430S to test this.
Change-Id: Ifa74f5373a6305d1237e7de6da35028e68f1e99c
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T420S can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T420S to test this.
Change-Id: I245acf81b34abccf7bcb04126275ab8b154135d5
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T520 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T520 to test this.
Change-Id: Iffc5dd2f23ee4896da633c18cbbf22c9e448edf1
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T530 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T530 to test this.
Change-Id: I94d239b65e6e8546a27f751d569681a4e68a4109
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T430 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T430 to test this.
Change-Id: I1fb1a9d3a84ce12ab9e3f22a699afbfd7cd1688f
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
On PC Engines apu1 there were issues with cold reset. Platform hangs
in boot path after performing reset using CF9h.
CB:10549 (amd/sb800: Make UsbRxMode per-board customizable)
mentions a similar issue, and added a configuration macro for it.
That error is also described in AMD SB800 Family Product Errata,
section 15 USB Resets Asynchronously With Port CF9h Hard Reset.
This workaround simply non-execute USB configuration during boot
and hence no reset via CF9h is done.
TEST=perform multiple cold resets and see if platform boots
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: Ie6cebcfc4b77e121ef44a25fa81377eb5e1f0644
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41627
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this patch, the ThinkLight on the ThinkPad X220 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own an X220 to test this.
Change-Id: Icead793694475e2f63353690203790ab7ce7c597
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40668
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this patch, the ThinkLight on the ThinkPad T420 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T420 to test this.
Change-Id: I4f9a9937a45995b72a9712919316e95bb8f82f45
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change adds a target to the top level Makefile that allows
building sconfig and generating static.c/static.h without building
the rest of coreboot.
It also adds $(DEVICETREE_STATIC_C) to the c-deps for each stage so
the files are generated before the build runs.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4320288422230d8913dfa7cc7b7512775a1a797b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41439
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable drivers for SoundWire codecs and define the topology in
the devicetree for the volteer variant with the SoundWire daughter
board connected.
+------------------+ +-------------------+
| | | Headphone Codec |
| Intel Tigerlake | +--->| Realtek ALC5682 |
| SoundWire | | | ID 1 |
| Controller | | +-------------------+
| | |
| Link 0 +----+ +-------------------+
| | | Left Speaker Amp |
| Link 1 +----+--->| Maxim MAX98373 |
| | | | ID 3 |
| Link 2 | | +-------------------+
| | |
| Link 3 | | +-------------------+
| | | | Right Speaker Amp |
+------------------+ +--->| Maxim MAX98373 |
| ID 7 |
+-------------------+
This was tested by booting the firmware and dumping the SSDT table
to ensure that all SoundWire ACPI devices are created as expected with
the properties that are defined in coreboot under \_SB.PCI0:
HDAS - Intel Tigerlake HDA PCI device
HDAS.SNDW - Intel Tigerlake SoundWire Controller
HDAS.SNDW.SW01 - Realtek ALC5682 - Headphone Codec
HDAS.SNDW.SW13 - Maxim MAX98373 - Left Speaker Amp
HDAS.SNDW.SW17 - Maxim MAX98373 - Right Speaker Amp
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I7782059807416369e0e1ba0d4d7c79dcab0fcbc5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40894
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of only using the baseboard devicetree add a placeholder
overridetree for volteer and refer to it in Kconfig.
This will allow us to add the volteer specific devices here instead
of at the baseboard level.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I7788a5473fc2275a9791fb27e0e4018a0efcd0f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40893
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a document about the SoundWire implementation in
coreboot with details adding new controllers and codecs and
connecting them in the mainboard devicetree.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ibc04442e22acfc03ff86c49c8a7a215ceefc24c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40892
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ALC5682 headset codec can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is supported
- Data Ports 1-4 are supported as both source and sink
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 1:
chip drivers/soundwire/alc5682
register "desc" = ""Headset Codec""
device generic 0.1 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW01)
{
Name (_ADR, 0x000021025D568200)
Name (_DDN, "Headset Codec")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
[...]
}
}
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-bra-flow-controlled", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I488dcd81d2e66a6f2c269ab7fa9f7ceaf2cbf003
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40891
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MAX98373 smart speaker amp can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is not supported
- Data Port 1 is the 32bit data input for the speaker path
- Data Port 3 is the 16bit data output for I/V sense ADC path
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 1 and has strap
settings configuring it for unique ID 3.
chip drivers/soundwire/max98373
register "desc" = ""Left Speaker Amp""
device generic 1.3 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW13)
{
Name (_ADR, 0x000123019F837300)
Name (_DDN, "Left Speaker Amp")
Method (_STA)
{
Return (0x0F)
}
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
Package () { "mipi-sdw-dp-3-source-subproperties", "SRC3" },
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00753000, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SRC3, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I3f8cb2779ddde98c5df739bd8a1e83a12a305c00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The Intel Tigerlake SoundWire controller has 4 master links which
are configured differently depending on the external crystal oscillator
which is connected to the PCH.
This function will read the PCH PMC EPOC register to determine the
frequency and then fill out the master link entries with the correct
table values.
The frequency is also provided directly in a custom "ip-clock" property
which will be added to the link descriptor and passed to the OS driver
so it can know the clock rate of the master.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This driver provides support for Intel SoundWire controllers. It is
intended to be used by multiple Intel SoCs and relies on retrieving
controller/master information from the SoC itself. As such it
provides a function that must be implemented by the SoC to fill out
this structure.
The Intel SoundWire driver in the Linux kernel expects firmware to
inform it which master links are unused by adding a custom property
to the link descriptor. This is done by looking for any children
attached to the device that use each link and disabling the ones
that are unused.
Mainboards will enable this driver and define the controller in
devicetree.cb in order provide the required ACPI tables, but the
mainboard should not need to provide any configuration itself as that
should all come from the SoC directly.
This was tested with the volteer board by adding this controller and a
codec to devicetree.cb and ensuring that the properties are all present,
including the custom properties for the device clock and quirk mask for
disabled links.
Device (SNDW)
{
Name (_ADR, 0x40000003)
Name (_CID, Package () { "PRP0001", "PNP0A05" })
Name (_DDN, "Intel SoundWire Controller")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
Package () { "mipi-sdw-master-count", 0x04 }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-link-0-subproperties", "LNK0" },
Package () { "mipi-sdw-link-1-subproperties", "LNK1" },
Package () { "mipi-sdw-link-2-subproperties", "LNK2" },
Package () { "mipi-sdw-link-3-subproperties", "LNK3" },
}
}
Name (LNK0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-clock-stop-mode0-supported", One },
[...]
Package () { "intel-sdw-ip-clock", 0x0249F000 },
Package () { "intel-quirk-mask", Zero },
}
}
[...]
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4b4f843a7e5ea170b070a1697c8eedc7c103e127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PMC EPOC register indicates which external crystal oscillator is
connected to the PCH. This frequency is important for determining the
IP clock of internal PCH devices.
Add definitions that allow this register to be read and extract the
crystal frequency, and a helper function to extract and return this
as the defined enum.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM
part should be set to 0xF.
BUG=b:157178553, b:156555863
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a
SKU4 volteer to the kernel and run "memtester 6G 100" and verify it
completes successfully without error and does not crash.
Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD
contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f).
After fixing that error, I noticed that two generic SPDs could
be collapsed into one, so I removed one of the duplicate generic
SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex),
and changed Makefile to collapse volteer's DRAM ID 2 into ID 0.
BUG=b:156126658, b:156058720
TEST=Flash and boot a ripto to kernel. Also verified that ripto
can boot successfully to the kernel at 4267 MT/sec with FSP built
in debug mode with RMT enabled.
Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function adds support for gpio_configure_pads_with_override
which:
1. Takes as input two GPIO tables -- base config table and override
config table
2. Configures each pad in base config by first checking if there is a
config available for the pad in override config table. If yes, then
uses the one from override config table. Else, uses the base config to
configure the pad.
BUG=b:153456574
TEST=Build and boot dalboz
BRANCH=none
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Had to increase MAX_PSP_ENTRIES to accommodate the 16 APCBs we have
the ability to add.
BUG=b:150862063
TEST=Boot Trembyle
BRANCH=None
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I64eccfa28839768788f53327caf187a564842162
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2090323
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41580
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This node is required so we can add child ACPI nodes.
BUG=b:147042464
TEST=Boot trembyle and confirm Bus A has a firmware node
$ cat /sys/bus/pci/devices/0000\:00\:08.1/firmware_node/path
\_SB_.PCI0.PBRA
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I18144a69ed28a913bc9a2523d69edf84a1402e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is a squash of the following commits. The original values were
wrong, and had confusing naming.
soc/amd/picasso: Get rid of *_DEVID from pci_devs.h
Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I203449499840bf0a6df8bd879fb7d2e75a16b284
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153714
src/amd/picasso: Update PCI bridge devices
Orignal-Change-Id: I1fa9d52ce113eacdc5c9ba31ab46b6428a7d6ca9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Zork: Reorganizing ACPI and adding PCI bridge configs
Signed-off-by: Pranay Shoroff <pshoroff@google.com>
Original-Change-Id: I1e2095567525f302dfd0bce8e39001250523180b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2063536
soc/amd/picasso: Fix soc_acpi_name() to use devfn instead of devid
Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I2486e7e0059e0528f53d5a158c9328636563fe93
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153712
BUG=b:147042464
TEST=Build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I91bf7f9edcddf03027f8fdcaadf4e290ece10df5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is currently used by trembyle. Add it in a common location so other
boards can use it.
BUG=b:147200751
BRANCH=none
TEST=Able to get ec codec on trembyle
Change-Id: Ie21cd813b0e3129f1c61d2de199532b25d3c70fa
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2000271
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@chromium.org>
Commit-Queue: Martin Roth <martinroth@chromium.org>
Tested-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41575
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that we have created the IOSAV API, we can put it to good use.
Drop all the helper macros and replace them with struct constructs.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: Ib366e364df11c9bb240cdfbce418540ec715c634
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41003
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We now use a static variable to handle the sequence length.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: Id3115c14336ea128264bd3945a99c52b9796d115
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Instead of directly writing values to the IOSAV registers, use a struct
and some helper functions to provide a cleaner interface for the IOSAV.
Having IOSAV_SUBSEQUENCE refer to a static function is weird, but we
will remove this macro in a follow-up that does not change the binary.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I73f13c18a739c5586a7415966f9017c2335fdfd1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
We set bit 15 of IOSAV_n_SUBSEQ_CTRL three times, but it is reserved.
Since this bitfield is five bits wide, manually truncate the values so
that bit 15 does not get set.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: Ib61b026b016b0d22e164f8817158ec5093f6bb9e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Turn `iosav_run_queue` and `iosav_run_once` into functions. Inlining
them does not have any effect, as the resulting binary is identical.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I7844814eeedad9b1d24f833a77c90902fa926bfe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Turn it into a macro that looks like a function, and add another, more
generic `iosav_run_queue` that covers all current use-cases. They will
be replaced with functions in a follow-up to preserve reproducibility.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I07b260b5fb111c1408ff75316dc0735a9e642ac9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
To replace the register writes with assignments to struct fields, we
would need to have the values as parameters of a single macro. So,
split the raw value of `IOSAV_n_SP_CMD_CTRL_ch` in two parts. Note that
the single command that sets bit 17 is likely wrong, but it will be
fixed after refactoring. For now, we'll treat it as part of `ranksel`.
Move the parameters of `ADDR_UPDATE` into the top-level IOSAV macro.
Hopefully, this will be enough to replace the underlying implementation.
Line length limits are not for review. Breaking the lines unnecessarily
complicates search and replace operations, and wil be taken care of in
subsequent commits.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I404edbd5d90ddc2a6993f39f552480d1ef24e153
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This change was missed when I ported over fsp_params.c.
BUG=b:157140753
TEST=Boot trembyle to OS
Fixes: 89e51e6178 ("soc/amd/picasso: Allow mainboard to provide pci ddi descriptors")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icdb6aebe5a3be7174170bdf37a1f379f02dcc5a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
New information indicates the PSP expects the APOB NV region
populated for all types of boot, and this is not a feature only
used for S3. Switch over to using the MRC_CACHE flash region.
Remove the Kconfig symbols for the APOB_NV base and size. Override
the MRC_CACHE_SETTINGS_CACHE_SIZE to ensure the default maintains the
minimum required size. Use the generated (or mainboard-specified)
fmap.fmd file as an input for amdfwtool and properly match the
flash region.
Change the original naming for the APOB destination, which matched the
PSP spec's field name, to PSP_APOB_DESTINATION. This should be more
intuitive for a source code reader. The APOB address is the location
in DRAM where the PSP puts its output block.
BUG=b:147042464, b:153675914
TEST=Boot trembyle
Original-Change-Id: Ia5ba8646deec2bd282df930f471738723063eef8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2080375
Original-Change-Id: I972d66f1817f86ff0b689f011c0c44c3fe7c8ef7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2053312
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I4550766ece462b65a6bfe6f1b747343e08e53fe5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Patrick Rudolph