This change adds a helper function lpc_early_init() which does the
following things:
1. Enables LPC controller
2. Disables any LPC decodes (These can be set up later by SoC or
mainboard as required).
3. Sets SPI base so that MMIO base for SPI and eSPI controllers is
initialized.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The default setting of the root port ASPM configuration can be
overridden from the device tree by using a non zero value.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I85c545d5eacb10f43b94228f1caf1163028645e0
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Current Interrupt setting use 2nd parameters as device function number.
- Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
- Use irq number directly rather than irq definition as its number
is not for PCI device.
The issue found while enabling GBE and GBE interrupt is not working
without this change.
Reference
- ACPI spec 6.2.13 _PRT
- FSP reference code:
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/
ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/
PeiItssPolicyLibVer2.c
- BIOS reference code:
https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/
TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl
TEST=boot to OS with GBE enabled and check GBE interrupt
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pci_domain_set_resources is duplicated in all the SOCs. This change
promotes the duplicated function.
Picasso was adding it again in the northbridge patch. I decided to
promote the function instead of duplicating it.
BUG=b:147042464
TEST=Build and boot trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
IedSize and EnableC6Dram are removed in JSL FSP v2114 so
remove them from 'fsp_params.c'.
BUG=155054804
BRANCH=None
TEST=Build and boot JSLRVP
Change-Id: I47bd3f87bdb59625098c0d734695f02d738f8bbd
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41239
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch control SATA related UPDs based on the devicetree
configuration as per each board's requirement.
BUG=b:155595624
BRANCH=None
TEST=Build, boot JSLRVP, Verified UPD values from FSP log
Change-Id: I4f7e7508b8cd483508293ee3e7b760574d8f025f
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
This change provides a helper function espi_update_static_bar() that
informs the eSPI common driver about the static BAR to use for eSPI
controller instead of reading the SPIBASE. This is required to support
the case of verstage running on PSP.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
FSP provides the UPD's for SATA and DMI power optimization.
In this patch we are adding the soc's config support to set
those power optimization bits in FSP. By default those
optimizations are enabled. To disable those we need to set
the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1
in devicetree.
BUG=b:151162424
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change adds the following helper functions for eSPI decode:
1. espi_open_io_window() - Open generic IO window decoded by eSPI
2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI
3. espi_configure_decodes() - Configures standard and generic I/O
windows using the espi configuration provided by mainboard in device tree.
BUG=b:153675913,b:154445472
Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds eSPI register definitions for I/O and MMIO decode
using eSPI on AMD SoCs. Additionally, it also adds a macro to define
the offset of ESPI MMIO base from SPI MMIO base.
BUG=b:153675913
Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change sets LPC_IO_PORT_DECODE_ENABLE to 0 as part of
lpc_disable_decodes() to ensure that the I/O port decodes are also disabled.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1474f561997f2ee1231bd0fcaab4d4d4e98ff923
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change switches to using the common block SPI driver for
performing early SPI initialization and for re-configuring SPI speed
and mode after FSP-S has run.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia3186ce59b66c2f44522a94fa52659b4942649b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change adds support for using common SoC configuration by adding
soc_amd_common_config to soc_amd_picasso_config and helper function to
return pointer to the structure to amd common block code.
Change-Id: I8bd4eac3b19c9ded2d9a3e95ac077f014730f9d1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds support for following SPI configuration functions to
common block SPI driver and exposes them to be used by SoC:
1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM,
enables prefetching, disables 4dw burst mode and sets SPI speed and mode.
2. fch_spi_config_modes(): This allows SoC to configure SPI speed and
mode. It uses SPI settings from soc_amd_common_config to configure the
speed and mode.
These functions expect SoC to include soc_amd_common_config in SoC
chip config and mainboard to configure these settings in device tree.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We should not need that.
Change-Id: Ic0181a300670ed7ee999dafedac79f3f89bfbee9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner
This change splits lpc_set_spibase() into two separate functions:
lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI
controller (if supported by platforms)
lpc_enable_spi_rom() - Enables SPI ROM
This split is done to allow setting of MMIO base independent of ROM
enable bits. On platforms like Picasso, eSPI base is determined by the
same register and hence eSPI can set the BAR without having to touch
the enable bits.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change adds support for struct soc_amd_common_config that allows
multiple AMD SoCs to share common configuration. This can then be used
by common/block drivers to get the required configuration from device
tree. It also provides function declaration for
soc_get_common_config() that needs to be provided by SoCs making use
of the common configuration structure.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idb0d797525414c99894a8e4ede65469381db7794
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support to configure the Silver and L3 PLLs and switch the APSS
GFMUX to use the PLL to speed up the boot cores.
Tested: CPU speed frequency validated for speed bump
Change-Id: Iafd3b618fb72e0e8cc8dd297e4a3e16b83550883
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Update memory regions, etc.
Change-Id: If852fe4465fb431809570be6cdccff3ad9d9f4f0
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39362
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Transfer sequence used by SPI-Flash application present in CB/DC.
1. Assert CS through GPIO
2. Data transfer through QSPI (involves construction of command
descriptor for multiple read/write transfers)
3. De-assert CS through GPIO.
With above sequence, in DMA mode we dont have the support for read
transfers that are not preceded by write transfer in QSPI controller.
Ex: "write read read read" sequence results in hang during DMA transfer,
where as "write read write read" sequence has no issue.
As we have application controlling CS through GPIO, we are making
fragment bit "set" for all transfers, which keeps CS in asserted
state although the ideal way to operate CS is through QSPI controller.
Change-Id: Ia45ab793ad05861b88e99a320b1ee9f10707def7
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39807
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves all the logic for setting up decode windows for LPC
under configure_child_lpc_windows() which is called from
lpc_enable_children_resources(). This is in preparation to configure
decode windows for eSPI differently if mainboard decides to use eSPI
instead of LPC.
Side-effect of this change is that the IO decode registers are written
after each child device resources are considered.
BUG=b:154445472
Change-Id: Ib8275bc4ce51cd8afd390901ac723ce71c7a9148
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41070
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
eSPI on Picasso is configured using the LPC bridge configuration
registers. This change enables config options to allow SoC to select
if it supports eSPI (SOC_AMD_COMMON_BLOCK_HAS_ESPI) and mainboard to
select if it wants to use eSPI instead of LPC for talking to legacy
devices and embedded controllers (SOC_AMD_COMMON_BLOCK_USE_ESPI).
BUG=b:154445472
Change-Id: I15e9eb25706e09393c019eea4d61b66f17490be6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41069
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Copyright notices are best stored in AUTHORS
Change-Id: Ib9025c58987ee2f7db600e038f5d3e4edc69aacc
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41203
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add setting of the MaxPayload for each root port from the device tree.
By default MaxPayload is set to 128 bytes. This change allows changing
to 256 bytes.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I61e1d619588a7084d52bbe101acd757cc7293cac
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
This is used for 'KHz' (line #19)
Change-Id: I4d610607b50d2fac1150deaaf94f3cb331540fbc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
C-State latency table was exposed by both intel-idle driver and
BIOS/coreboot. And table in Kernel was used before.
After kernel patch (https://patchwork.kernel.org/patch/11290319/),
only BIOS/coreboot exposes C-State latency table through _CST.
As current C-State latency table info is not correct for Tigerlake,
update proper info according to BWG and reference code.
- Update latency: CpuPowerMgmt.h
Use BIOS reference code as values in BWG is not up-to-dated
- Remove MSR program for latency: BWG 4.6.4.3.4
Reference:
- TGL BWG #611569 Rev 0.7.6
- https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/
ClientOneSiliconPkg/Cpu/Include/CpuPowerMgmt.h
BUG=b:155223704
BRANCH=None
TEST=Boot to OS and check C-State latency
expected result
>cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency}
POLL
C1_ACPI
C2_ACPI
C3_ACPI
0
1
253
1048
For detail, refer Bug info.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8bf2976ad35b4cf6f637a99c26b4f98f9f6ee563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
CB:41106 revealed that mb/intel/cedarisland already sets FSP-S UPD (see
CB:40735) while the required includes are still missing in CPX. Buildbot
did not fail because `ramstage.c` never was (implicitly) included.
Fix this problem by making SKX/CPX share a common ramstage header for
now by moving the one from SKX.
Test: Build cedarisland_crb
Change-Id: I9cd25edd167ec71ee98c7ffa4fa6f95ca73a75e9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
This enables adding ACPI objects at run-time for SD Card and EMMC
devices.
BUG=b:150872580
TEST=Build and boot the mainboard. Observe ACPI objects like card detect
gpio are added to the SSDT.
Change-Id: I754aee3b0fd343994bd06d9c28e038f651009d6d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Send end of post message to CSME in FSP, by selecting EndOfPost
message in PEI phase. In API mode which coreboot currently uses,
sending EndOfPost message in DXE phase is not applicable.
Change-Id: Ie21dcfc84d331f036090d01ea3e3925b81eea902
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
vboot_recovery_mode_enabled() was recently changed to assert() when it
is called before vboot logic has run, because we cannot determine
whether we're going to be in recovery mode at that point and we wanted
to flush out existing uses that pretended that we could. Turns out there
are a bunch of uses like that, and there is some code that is shared
across configurations that can and those that can't.
This patch cleans them up to either remove checks that cannot return
true, or add explicit Kconfig guards to clarify that the code is shared.
This means that using a separate recovery MRC cache is no longer
supported on boards that use VBOOT_STARTS_IN_ROMSTAGE (this has already
been broken with CB:38780, but with this patch those boards will boot
again using their normal MRC caches rather than just die). Skipping the
MRC cache and always regenerating from scratch in recovery mode is
likewise no longer supported for VBOOT_STARTS_IN_ROMSTAGE.
For FSP1.1 boards, none of them support VBOOT_STARTS_IN_BOOTBLOCK and
that is unlikely to change in the future so we will just hardcode that
fact in Kconfig (otherwise, fsp1.1 raminit would also have to be fixed
to work around this issue).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I31bfc7663724fdacab9955224dcaf650d1ec1c3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Literally nobody else uses it and it does nothing.
Change-Id: I7e6466137b5069a7f785972205bd43f3cb25d378
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41112
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC device name string "PMC" is added to platform soc_acpi_name()
for pmc driver.
BUG=b:151646486
TEST=Built and booted to kernel successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ida7fc7e2340f2a809464ca66fd1922f3229e2e18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
AMD common block LPC driver does not really need a custom ops_pci
structure. This change drops the lops_pci and instead set .ops_pci to
the default pci_dev_ops_pci.
BUG=b:154445472
Change-Id: Ia06eed04097739c3e21dc13e056a2120ff5eb382
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This replaces GPLv2-or-later and GPLv2-only long form text with the
short SPDX identifiers.
Commands used:
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Also split "this is part of" line from copyright notices.
Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
That makes it easier to identify "license only" headers (because they
are now license only)
Script line used for that:
perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist...
Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
