MBA has a soldered RAM without SPD, so you need to use stored SPD.
Change-Id: I0205e6c65ccbfe7764c12c815e60801a3c3623a5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11841
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Just ran autoport on the data from MacBookAir4,2
Change-Id: Iba2a56a6846d81d29e6b090a9a31253ce240914d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11840
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make sure edge write test results are sane.
Check rn.all to make sure rn.start and rn.end are valid.
Most likely the following test is going to fail on the same
rank anyway.
Change-Id: Ifa601406e6c74ceb8d70063be5ce1bf6bc512c18
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11247
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Don't disable PEG bits while turning on IGD.
Fixes PCI device enumeration of PEG devices.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
Sidenote: This should be taken from a CMOS option instead.
Change-Id: I2d6522504e4404f2d57f9c319351d08317aefdcb
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11058
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Activate PEG clock-gating only if all PEG devices are disabled.
Fixes system hang when trying to access PEG registers.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
Change-Id: I7d62fbb83c16741965639cea1a0e4978d4e3d6da
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11059
Tested-by: build bot (Jenkins)
Currently cbfstool would reject non-alpanumeric characters in
image names. Underscore is not alphanumeric and is used in some
default fmaps. This change allows image names to contain all
"printable" characters except spaces.
Change-Id: I6ba2b581d5623f5b028149ece0169892ea63fd04
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: http://review.coreboot.org/11807
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since we now have more freedom in the bootblock linking step it no
longer makes sense to use a monolithic bootblock.S. Code segments must
still be included as the order in bootblock.S determines code flow.
However, non-code flow related assembly stubs don't need to be directly
included in bootblock.S
Change-Id: I08e86e92d82bd2138194ed42652f268b0764aa54
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11792
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The code flow doesn't fall through to walkcbfs, as it does in the rest
of bootblock.S. Instead, walkcbfs is called (albeit via a jmp). The
linker cannot know this when walkcbfs.S is included directly.
When we use a CAR bootblock, we lose several hundred bytes because
walkcbfs is not garbage-collected, yet it isn't used. This problem
is solved by assembling walkcbfs.S separately, and linking it.
Change-Id: Ib3a976db09b9ff270b7677cb4f9db80b0b025e22
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11785
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As part of preparing for systems with non-memory-mapped media, we want
to be able to call into C code. This change allows us to link C code
directly into the bootblock. The steps of going from bootblock main()
to CAR setup to C code will be implemented in subsequent patches.
Note that a few files selected with bootblock-y will now be compiled
for the bootblock as well, but since we enabled garbage collection,
they will not be included in the final binary.
Change-Id: I5ca6dcaf176f5469c6a3bb925859399123493bc6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11783
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The only difference between the ifeq/else/endif guarded rules is the
linker flags specific to x86. Add those flags to LDFLAGS_bootblock,
and only use one rule for bootblock.debug.
Change-Id: I986a93e0418f05fb273512d7efe0573052493332
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11782
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The macro is defined in `util/cbmem/cbmem.c` too, so do the same here,
so that searching for that macro name shows all the usages.
Change-Id: I52e9fa414fbbe2012bc6d00312db528efba3e564
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11803
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Commit 47818b4d60
(fsp/cache_as_ram.inc and boards: Fix incorrect usage of POST_IO)
breaks the logic which decides whether FSP
could be found or not in cache_as_ram.inc.
Fix the error by inverting the logic of the test.
TEST=Bootet mc_tcu3 board
Change-Id: I993d3422ac406d204a53e4dc890210fb9a52469d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11806
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Now that cbfs is adding more metadata in the cbfs file
header one needs to access that metadata. Therefore,
add struct cbfsf which tracks the metadata and data
of the file separately. Note that stage and payload
metadata specific to itself is still contained within
the 'data' portion of a cbfs file. Update the cbfs
API to use struct cbfsf. Additionally, remove struct
cbfsd as there's nothing else associated with a cbfs
region aside from offset and size which tracked
by a region_device (thanks, CBFS_ALIGNMENT!).
BUG=None
BRANCH=None
TEST=Built and booted through end of ramstage on qemu armv7.
Built and booted glados using Chrome OS.
Change-Id: I05486c6cf6cfcafa5c64b36324833b2374f763c2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The x86 bootblock linking is a mess. The bootblock is treated in
a very special manner, and never received the update to link-time
garbage collection.
On newer x86 platforms, the boot media is no longer memory-mapped.
That means we need to do a lot more setup in the bootblock. ROMCC is
unsuitable for this task, and walkcbfs only works on memory-mapped
CBFS. We need to revise the x86 bootflow for this new case.
The approach this patch series takes is to perform CAR setup in the
bootblock, and load the following stage (either romstage or verstage)
from the boot media. This approach is not new, but has been done on
our ARM ports for years.
Since we will be adding .c files to the bootblock, it is prudent to
use link-time garbage collection. This is also consistent to how we
do things on other architectures. Unification FTW!
Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11781
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Up to now, the multi-CBFS code path merely looked up files in the "boot
ro" image (ie. the default), disregarding the specified fmap region to
use for CBFS.
The code still relies on the master header being around, which on the
upside allows it to skip an offset at the beginning of the region (eg.
for ARM bootblocks).
This will change later (both the reliance on the master header and the
presence of the bootblock like this).
Change-Id: Ib2fc03eac8add59fc90b4e601f6dfa488257b326
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
POST_IO is a user-visible config bool. fsp_1_0/cache_as_ram.inc made a
mess of it, by forcing a build-time error when CONFIG_POST_IO was not
being set. fsp 1.0 boards ended 'select'ing this in their Kconfig.
Refactor fsp/cache_as_ram.inc handling of POST codes, and remove the
"select POST_IO" from boards that have it. Instead of implementing an
ad-hoc changing post code display and a delay based on port 0xed, just
encode the FSP failure code in the POST code. Since FSP failure codes
are > 16, we can encode the failure code in the lower nibble, and theirfailing function in the upper nibble.
Change-Id: Iaa3e6533e8406b16ec0689abd704984d79293952
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8485
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
There is no other guard to prevent this from being picked up when
building for other architectures.
Change-Id: I2039a289a4dd9970d5dd0f90d43d5d5c2a6d0a0b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11795
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The binutils-2.25 has added some new line, making the hunk
move downward a little. The utility patch can fix the offset
with "fuzz" message. So, recreate the patch to avoid that
message.
Change-Id: Ie659a8faf923465f6d47f7c0c0bf903c5eb903ab
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11639
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Clang is the default compiler on BSD and OS X. With this
change, we don't have to install gcc any more. Clang can
act as host cc.
This is a known issue on GNU mail list. Please refer
the link below.
https://sourceware.org/bugzilla/show_bug.cgi?id=17473
Change-Id: I0f014b776e86e6d0cbebd560cb17f469f31e1dfb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11638
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Grep the output of wget, showing only the percentage.
Leave the final "100%" unerased.
Checking return code of wget is removed.
Change-Id: I4559e88d541738a594dce92e23589992f234cb9b
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The error-prone interface of cbfs_get_file_content() led to another
possible NULL dereferencing. So check for CBFS_DEFAULT_MEDIA here
like the other functions do.
Change-Id: Ib8732160d389e9ecceb44f28be0e7de9a1d66e04
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11796
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Building an image for the Lenovo X201 with native graphics
initialization selected fails due to the changes introduced by commit
a3b898aa (edid: Clean-up the edid struct).
Same as in 11738 / 11585 / 11491
Change-Id: I4233a4ce2f5423c7ebdad68e8059cd34ac61cfaa
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/11787
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Users of DRIVERS_UART_8250MEM_32 would have to also select
DRIVERS_UART_8250MEM to avoid missing Kconfig dependencies. Instead,
do what the OXPCIE driver dies and select the appropriate options.
Change-Id: I40d93df024fcb3a9ad6dc51d6a5966e7b1b6c07f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11786
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
mohonpeak is the reference board for Rangeley. I doubt anyone uses it
or cares about it. We jokingly refer to it as "Moron Peak". It's code
with no known users, so we shouldn't be hauling it around for the
eventuality that someone might use it in the future.
Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11790
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
We already have two other code paths for this silicon. Maintaining the
FSP path as well doesn't make much sense. There was only one board to
use this code, and it's a reference board that I doubt anyone still
owns or uses.
Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11789
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
This is a sad story. We have three different code paths for
sandybridge and ivybridge: proper native path, google MRC path, and,
everyone's favorite: Intel FSP path. For the purpose of this patch,
the FSP path lives in its own little world, and doesn't concern us.
Since MRC was first, when native files and variables were added, they
were suffixed with "_native" to separate them from the existing code.
This can cause confusion, as the suffix might make the native files
seem parasitical.
This has been bothering me for many months. MRC should be the
parasitical path, especially since we fully support native init, and
it works more reliably, on a wider range of hardware. There have been
a few board ports that never made it to coreboot.org because MRC would
hang.
gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so
the effort was abandoned at first. Once the native path became
available, the effort was restarted and the board is now supported.
In honor of the hackers and pioneers who made the native code
possible, rename things so that their effort is the first class
citizen.
Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11788
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
When adding an FSP blob relocate it to its final
destination. This allows FSP to not be hard coded in
the cbfs. In order for the include paths to work
correctly w/ the edk 2 headers we need to supply
a neutered ProcessorBind.h to match up with the
tool environment such that one can get the UEFI
Platform Initialization type definitions.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados and booted. Also added FSP with -b and manually
adjusted location in fsp cache-as-ram. Booted as well.
Change-Id: I830d93578fdf745a51195109cf18d94a83ee8cd3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11778
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Certain chipsets provide their own main symbol for verstage.
Therefore, it's necessary to know this so that those chipsets
can leverage the common verstage flow.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan using this option.
Change-Id: If80784aa47b27f0ad286babcf0f42ce198b929e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Though the tegra124 SoC makes their faster cpus come up
in verstage it can still use the common flow. Therefore,
use the common verstage API for performing thenecessary
steps to initialize the caches on the faster cores.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan.
Change-Id: I93023ec92a9de111db688742b057b5c64143f0b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11776
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The file was not referenced or used. Kill it.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=None
Change-Id: I30285d523ef3ca4dd3ce38b53aeb42862d929c90
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11775
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For shared compilation units between coreboot proper
and cbfstool that means one needs to provide printk
logging. Therefore, provide printk() at <console/console.h>
to mimic coreboot's environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool with code that includes and uses
<console/console.h>.
Change-Id: I8e54d403526a397e4fd117738a367a0a7bb71637
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There are compiler settings and interactions with other
header files that should be handled. First use __typeof__
instead of typeof because 'std' modes don't accept typeof.
The __typeof__ variant works equally well on clang. The
other change is to guard the helper macros so as not to
trigger redefinition errors.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool including commonlib/helpers.h
Change-Id: I58890477cb17df14a9fa8b7af752a7c70769cf36
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11773
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to support FSP 1.1 relocation within cbfstool
the relocation code needs to be moved into commonlib.
To that end, move it. The FSP 1.1 relocation code binds
to edk2 UEFI 2.4 types unconditionally which is separate
from the FSP's version binding.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Ib2627d02af99092875ff885f7cb048f70ea73856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11772
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now that the commonlib/endian.h routines have landed utilize
those in the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If431d64fd2843bea864d971ca1ea06b07c0d6435
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11771
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Older gcc versions throws a warning when a struct or union is
declared without a valid name (anonymous). This patch enables the
feature for older gcc versions so that no warning will be issued.
Change-Id: Idc5481f4d5723c5090a6f7d7dbb0686a737e11fc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Remove dummy data from hwinfo.hex as it is not needed
anymore in the system.
Change-Id: I4f328a4ef61741039eb2c030e23fea33f539c2bb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11763
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Since microcode was moved to 3rdparty/blobs, we need to select
USE_BLOBS in Kconfig to get the submodule 3rdparty/blobs automaticaly.
Change-Id: I25e574fd90b830448cacccd16d01a5a2dbc8517d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11764
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
I missed these Makefile.inc changes. As verstage.c was removed
remove the references within the Makefile.incs.
Change-Id: I5d38c0a87d057622a3706bf3bde1142944c3b17c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11759
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
They allow optimizing a verification of a whole CBFS image by only
dealing with the headers (assuming you choose to trust the hash
algorithm(s)).
The format allows for multiple hashes for a single file, and cbfstool
can handle them, but right now it can't generate such headers.
Loosely based on Sol's work in http://review.coreboot.org/#/c/10147/,
but using the compatible file attribute format. vboot is now a hard
dependency of the build process, but we import it into the tree for
quite a while now.
Change-Id: I9f14f30537d676ce209ad612e7327c6f4810b313
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11767
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1c5e3424cb56f1f10e75bb07db084c3500f3ba07
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11768
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
We need to emit some hex strings.
Change-Id: I9e7e184282f6ad0470f2e269f5dc874e78f8b697
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11766
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since fsp_baytrail was refactored to use microcode.bin
in 3rdparty/blobs, we do not need MICROCODE_INCLUDE_PATH any more.
Change-Id: I4382b0c174877186bd37fbff21f3269136d15e10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11762
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Building an image for the Lenovo X200 with native graphics
initialization selected fails due to the changes introduced
by commit a3b898aa (edid: Clean-up the edid struct).
Change-Id: Ifd36571c9c00761b4a2a6deb3c9c4a52d9d13e25
Signed-off-by: Audrey Pearson <apearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11738
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Building coreboot with the SeaBIOS or FILO payload selected, their config and
revision are added to CBFS.
```
Creating out/bios.bin.elf
CBFS coreboot.rom
PAYLOAD payloads/external/SeaBIOS/seabios/out/bios.bin.elf (compression: LZMA)
CONFIG .config
REVISION build.h
CONFIG payloads/external/SeaBIOS/seabios/.config
REVISION payloads/external/SeaBIOS/seabios/out/version.c
CBFSPRINT coreboot.rom
```
Align the path of the payload config by removing one space.
Change-Id: Icbb139c28b9dcb8d31989a48fa4fbe4a9b088972
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11710
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
vboot_handoff_flag was duplicating the logic to grab the handoff info, that is
already made available with vboot_get_handoff_info.
This uses vboot_get_handoff_info in vboot_handoff_flag instead.
Change-Id: I28f1decce98f988f90c446a3a0dbe7409d714527
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11498
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Inspired by the Sage source code (itself from coreboot).
Change-Id: I4864923166efb200882d895c572d1ee060c71951
Signed-off-by: Maxime de Roucy <maxime.deroucy@gmail.com>
Reviewed-on: http://review.coreboot.org/11730
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: Iecefdd1e827e4eb8b4da573e4291850d6c47767f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11754
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Vladimir Serbinenko