Also include arch/mmio via device/mmio.h and not directly to have the
[read,write][8,16,32]p helper functions available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id8573217d3db5c9d9b042bf1a015366713d508c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67981
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Also include arch/mmio via device/mmio.h and not directly to have the
[read,write][8,16,32]p helper functions available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c6f5c73b41546b304f16994d517ed15dbb555f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67980
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Enable DPTC and No Battery Mode for Skyrim. This allows Skyrim to boot
without a battery or with a critically low battery.
DPTC remains disabled for the Winterhold and Morthal variants until it
can be tested on those boards.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim with low & no battery
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Icc4084476916cc8e142908d8e58baf7124568b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67211
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the TPM I2C freqeuncy to 1 MHz for nivviks and nereid, and in
the baseboard. Other nissa devices will be changed after verification.
This saves 11 ms of boot time on nivviks and nereid.
400 kHz:
504:finished TPM initialization 272,304 (35,730)
...
512:finished TPM PCR extend 526,250 (23,729)
513:starting locking TPM 526,250 (0)
514:finished locking TPM 535,106 (8,855)
6:end of verified boot 543,927 (8,821)
1 MHz:
504:finished TPM initialization 266,293 (30,747)
...
512:finished TPM PCR extend 513,711 (20,108)
513:starting locking TPM 513,711 (0)
514:finished locking TPM 521,311 (7,599)
6:end of verified boot 528,893 (7,581)
BUG=b:249201598
TEST=On nivviks and nereid, all timing requirements in the spec are met.
Frequencies:
nivviks - 972.01 kHz
nereid - 968.99 kHz
Change-Id: I9dd783527d4215ed7d79d69853a1f321ea2d8a28
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Disable the external 1.05v VR in S0 as a fix for the
display flicker issue in ADL-N.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033, b:245970842
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: If9f40e6c37e80caceb726a8e5f4d4b14dc479858
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67654
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Disable the external 1.05v VR in S0 as a fix for the
Display flicker issue in ADL-N.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033, b:245970842
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iaa53bfd99a550b2cffcdaee640ee3a429e93aef7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Commit c7204b5a4 [mb/google/guybrush: Enable backlight in the OS]
disabled the GPIO for the display backlight in favor of using ACPI
to enable it, but this breaks display output for payloads which do
not/can not enable the backlight GPIO themselves (edk2, grub, SeaBIOS).
Re-enable the GPIO for display backlight so that payloads other than
depthcharge work properly.
TEST=build/boot google/dewatt with Tianocore payload, verify payload
display visible.
Change-Id: I2519d779954ed89486045aa7de0b18f1c31a4374
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Example for Alder Lake PTT:
Handle 0x004C, DMI type 43, 31 bytes
TPM Device
Vendor ID: INTC
Specification Version: 2.0
Firmware Revision: 600.18
Description: Intel iTPM
Characteristics:
TPM Device characteristics not supported
OEM-specific Information: 0x00000000
TEST=Execute dmidecode and see the type 43 is populated with PTT
on MSI PRO Z690-A WIFI DDR4
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I05289f98969bd431017aff1aa77be5806d6f1838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Based on DMTF SMBIOS Specification 3.1.0.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia2db29f8bc4cfbc6648bb2cabad074d9ea583ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Mendocino supports LP5x but currently doesn't support SPDs that use the
LP5x memory type, 0x15. This commit updates set 1 SPDs, which are
currently only used for mendocino, to use 0x13 for their memory type.
BUG=b:245509394
TEST=Generated SPDs, verified that only set 1 have changed to 0x13
Change-Id: I46606cb5ff871296d0214e1f781c3b22e93d24ea
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67747
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
use is_enabled_cpu() on cycles over device list to check
whether the current device is enabled cpu.
TEST: compile test and qemu run successfully with coreinfo
payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: If64bd18f006b6f5fecef4f606c1df7d3a4d42883
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67797
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add function defs and prototypes of functions checking whether
a device is {a cpu,an enabled cpu}
TEST: compile test and qemu executed successfully with
coreinfo payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: Iabc0e59d604ae4572921518a8dad47dc3d149f81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Fix the warning below when building GA-945GCM-S2L with 64-bit:
src/arch/x86/idt.S:216: Warning: no instruction mnemonic suffix given and no register operands; using default for `iret'
Change-Id: Ibbc106714e25293951a71d84fea0a660f41f9c02
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Rename so table more indicative of when GPIOs are set, and so it can
be used for more than just setting PCIe GPIOs.
Rename the getter function to match.
Change-Id: I285602209072247895c2cb0830f3faf675328757
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Icebf7e11736929389227063039575a4c5ecf3840
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
skiboot's Makefile always executes $(CC) to determine whether its clang
or GCC and not setting CROSS for clean target results in this annoying
output (assuming `powerpc64-linux-gcc` isn't available):
make[2]: powerpc64-linux-gcc: No such file or directory
Change-Id: I242b2d7c1bdf1bbd70fd4e4e0605341fe8301ca5
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
This patch adds ACPI configurations of 8MP YHUX and 2MP CJFKF28-1
as world- and user-facing cameras of Rex.
BUG=b:246413264
TEST=Verified world- and user-facing cameras using Chrome Camera App on
Google/rex device.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Iaaa16e491a66500606b3a9eb1d87f396641778e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Xivu uses PCIE WLAN, so disable the CNVi WLAN/BT.
BUG=b:247120749
TEST=Boot to OS on xivu and check that WLAN/BT still works.
Change-Id: I968d383278bd50268d899cff82067ceb7c3ba5ed
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Ben Kao <ben.kao@intel.com>
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: I17db734784ce96cdf5e0486dc2ad057d73bfb15f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Rather than duplicating the entire set of GPIOs from the baseboard, use
the variant_override_gpio_table() method like all other octopus
variants do.
TEST=build/boot ampton, dump GPIOs and verify unchanged.
Change-Id: I36aa25bbee7c21a51d9fdd40405f492082455d9c
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67803
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for the following two new memory parts to support a new
SKU that has two memory options that brya0 does not have:
MT53E2G32D4NQ-046 WT:C
MT53E512M32D1NP-046 WT:B
BUG=b:248126749
TEST="emerge-brya coreboot chromeos-bootimage", flash a skolas with
an image-brya0.serial.bin and verify it boots successfully to kernel.
Change-Id: I28667918e5a183339febdc054465effeac8bddbe
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67879
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Having to use a runtime configurable option backend like CMOS just to
specify the value of the "fn_ctrl_swap" option is annoying. Introduce
a new Kconfig option to allow specifying the fallback value, which is
only used when the option backend cannot provide a value.
Change-Id: I00bb3cd60c443fc0c8adb82e8e0c436dfc5de24b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67836
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: I11814016d654bc2c2e6d24b3d18fb30d5b843fe9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Id1e1a67608454466dc65bf4c4985cf4eba84c97d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Ib8439e664defeafd2d08cffb74c997ab69230231
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Iaa3c9404919fd6c43596d7b27cfab43a1a5b0b21
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use just one function to get the chipset powerstate and add an argument
to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the
failure log accordingly.
TEST: compile tested and qemu emulation successfully run
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The current IPU ES entry value is always set to true for ADL-N and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
Alderlake-N silicon has the same CPU id for all the SKU's and
also the production binaries are backward compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:248249032
TEST=Verify the Camera functionality by enabling the IPU secure mode
on ADL-N variants with both ES/QS silicon.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I75b222e6f2b1ccdc5b6c448eb60afff3c1da3a8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Add a section explaining how the detect feature works and when it should
be used.
Change-Id: Ife5178d4565e76d0ff436c835c9c47525015c3ed
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In order that GPP_H13 not use the GPIO override programming from its
baseboard (brya), explicitly program GPP_H13 to a output HIGH instead
of relying on the 20K pullup from the baseboard.
BUG=b:240617195
TEST=SSD still functional
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iddedebe2d5cfc0123932b14980d1268bcb147703
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
The next rev of this board will move the dGPU PEXVDD enable pin from
GPP_E10 to GPP_F12. This patch handles both the old and newer revisions
by using an ACPI Name to hold the GPIO # for PEXVDD enable. It also
cleans up the GPIO handling a little bit between board revs.
BUG=b:242752623
TEST=dGPU is functional and power sequencing tests still pass on board
rev 2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icc7968777f86ab07561b0a861b7d22ec714d1c34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
On Banshee, when the privacy switch is toggled the camera is
disconnected. Which means that we will never be able to tell the user
that the privacy switch is enabled when the camera is on, making the
virtual control unusable.
Remove the description.
BUG=b:248219472
BRANCH=firmware-brya-14505.B
TEST=none
Change-Id: I1a241bd889c0c1aae039510a0620748b2f7a6806
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The headers added are generated as per FSP v3361.03
In the future, when Alder Lake and Raptor Lake fsp align, Raptor Lake
fsp headers can be deleted and Raptor Lake soc will also use headers
from alderlake/ folder.
BUG=b:247855492
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: I267a0aefca18492bcbcfbf7acbe271887f0a39cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Issue:
Camera APP is not functional after CB:67434 applied.
Root cause and solution:
SCP hardware needs to access H264 encoder registers, so we need to
remove the DEVAPC protection of H264 encoder for SCP.
BUG=b:247743696
TEST=camera APP is functional.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I95946346018bff6a8f2dc02b1ff3e24ad079fc90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67787
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This reverts commit 1a8eb6c021.
Reason for revert: migrating to the 32MB AP Firmware hence, need to
revert this CL.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibea1ad0cff008f9391cbda9e51899557b1e9c979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Felix Held
Denis 'GNUtoo' Carikli